Texas Instruments

PCA9518DWT - 5-Channel I2C Hub | Texas Instruments

N.º da peça: PCA9518DWT ✓ Ativo
3 V to 3.6 V Vdss 20-pin SOIC Package 400 kHz Speed
MOQ: 1 |

PCA9518DWT Visão geral

Texas Instruments PCA9518DWT is a five-channel bidirectional I2C and SMBus buffer hub designed to extend a serial bus by separating SDA and SCL into multiple groups with up to 400 pF of bus capacitance per group. It operates from 3 V to 3.6 V at up to 400 kHz and is housed in a 20-pin SOIC package. The device allows one controller-side bus to fan out to five buffered downstream channels without placing every peripheral on the same capacitive load.

An I2C hub is an interface IC that buffers two-way serial-bus signals and divides one electrical bus into multiple branches. This topology extends practical bus reach beyond the 400 pF limit associated with a conventional I2C segment, reduces loading on individual branches, and improves system partitioning. The PCA9518 belongs to the broader I2C interface-controller and interface-IC hierarchy within semiconductor and bus-management electronics.

The PCA9518 includes five downstream channels, bidirectional SDA and SCL propagation, and support for I2C and SMBus systems. Its 3 V to 3.6 V operating range suits low-voltage embedded equipment, while the 400 kHz bus speed covers standard- and fast-mode I2C traffic. Power-up or reset configuration and an enable or shutdown function provide control over how the hub behaves when the system starts or enters a low-power state.

Buffering creates separate bus branches, but correct implementation still depends on termination, pull-up placement, channel enable sequencing, and compliance with the I2C specification. The device does not generate protocol timing; it reproduces and buffers the SCL and SDA signals. Downstream devices still require suitable pull-up resistors, and each channel should be analyzed for capacitance, voltage rise time, and signal integrity.

Typical uses include sensor aggregation, industrial instrumentation, embedded control modules, programmable-logic systems, test equipment, and compact computer peripherals where several low-speed devices share a controller interface. The hub is particularly useful when cable length, device count, or branch capacitance would otherwise exceed the practical loading of one unbuffered I2C segment.

Designers should preserve the recommended input and output capacitance, route SDA and SCL consistently, and review timing behavior across every enabled channel. Verify voltage compatibility, enable polarity, reset behavior, and bus rise time against the attached devices. Because the downstream branches are electrically distinct, each branch should be tested independently for contention, ringing, and recovery after clock stretching.

This page summarizes the PCA9518 interface architecture, package and operating limits, verified replacement availability, and practical bus-segmentation guidance. It also identifies where a same-footprint substitute must be confirmed rather than inferred from a similar channel count, helping engineers shorten sourcing review while protecting PCB compatibility.

Alternativas drop-in para PCA9518DWT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

PCA9518DWT Especificações

Device Type Expandable five-channel I2C/SMBus buffer hub
Number of Channels 5 downstream channels
Tensão de alimentação de operação 3 V to 3.6 V
Maximum I2C Bus Frequency 400 kHz
Maximum Bus Capacitance per Group 400 pF
Signal Direction Bidirectional
Supported Protocols I2C and SMBus
Buffered Signals SDA and SCL
Power-Up or Reset Configuration Supported
Enable or Shutdown Function Supported
Encapsulamento 20-pin SOIC
Tipo de montagem Surface mount
Device Classification Interface IC / I2C buffer hub

Guia de Configuração de Pinos do PCA9518DWT 20-pin soic

Configuração de pinos para PCA9518DWT (pacote 20-pin soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 20-pin soic para PCA9518DWT

Nenhum dado detalhado de pinagem disponível para PCA9518DWT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PCA9518DWT é adequado para 6 aplicaçãos: Industrial Sensor Aggregation, Embedded Control Module Expansion, Programmable Logic Crossbar, Test and Measurement Front Ends, Smart Home and IoT Peripherals, Compact Computer Peripherals.

🏭

Industrial Sensor Aggregation

The PCA9518DWT fits industrial sensor systems that must distribute an I2C or SMBus connection across several groups of remote or densely packaged sensors. Its five bidirectional channels separate up to 400 pF per bus group, while the controller side remains connected to a single upstream interface. The 3 V to 3.6 V supply range and 400 kHz operating limit suit low-voltage measurement equipment. Use separate pull-ups on the downstream branches and confirm rise time for the longest branch, because buffering capacity does not remove transmission-line effects or determine resistor values by itself.

🔧

Embedded Control Module Expansion

The PCA9518DWT is useful in embedded control modules where a microcontroller must connect to multiple I2C peripherals without concentrating all capacitance on one bus segment. Five downstream branches allow peripherals to be grouped by power state, sampling rate, or physical location. The hub buffers SDA and SCL bidirectionally at up to 400 kHz and operates from 3 V to 3.6 V. Firmware can use the enable and shutdown functions to avoid powering or driving unused branch devices, while reset and power-up configuration should be checked against the system startup sequence.

⚡

Programmable Logic Crossbar

The PCA9518DWT can organize I2C peripherals connected to programmable logic systems where fan-out, predictable branch loading, and compact routing are important. The five-channel structure allows configuration devices, sensors, and status components to occupy separate downstream groups, each with a maximum stated capacitance of 400 pF. At 400 kHz, timing margin remains sensitive to trace length, pull-up strength, and downstream device behavior. Review the FPGA or programmable-logic I/O voltage against the 3 V to 3.6 V hub supply before applying it to low-voltage fabric interfaces.

🔧

Test and Measurement Front Ends

The PCA9518DWT fits test and measurement front ends that combine several low-speed control peripherals, sensors, or data-acquisition components behind one host or embedded-controller bus. Separate branches reduce the capacitive burden presented by grouped devices and make channel troubleshooting more systematic. Its 400 kHz maximum rate is appropriate for configuration and status traffic rather than high-volume real-time acquisition. The design should include deterministic enable control, branch-specific pull-up networks, and continuity checks for each SDA and SCL path to prevent one peripheral from obscuring fault isolation.

🧩

Smart Home and IoT Peripherals

The PCA9518DWT is applicable to smart-home and IoT controller boards that aggregate sensors, EEPROMs, display controllers, and other low-speed peripherals. Five downstream branches simplify partitioning of capacitive loads and can isolate groups according to power consumption or update rate. The 3 V to 3.6 V operating range aligns with many embedded platforms, and the 400 kHz bus rate supports standard I2C transactions. Keep each branch within 400 pF and avoid excessive cable lengths; long wiring should include appropriate protection and signal-conditioning measures rather than relying on hub buffering alone.

🖥️

Compact Computer Peripherals

The PCA9518DWT can serve compact computer peripherals requiring several I2C targets behind a controller-side bus, including configuration, status, and auxiliary sensor functions. Buffering SDA and SCL into five groups limits the electrical loading seen by the host interface and makes each peripheral group easier to power down. The device operates up to 400 kHz, which is suitable for configuration traffic and ordinary peripheral transactions. Designers should confirm that all downstream devices share a compatible logic level and verify hot-plug, power-up sequencing, and bus contention behavior before using the hub with removable or independently switched modules.

Resumo dos produtos recomendados

PCA9518PW NXP Semiconductors Usado em: Industrial Sensor Aggregation, Programmable Logic Crossbar, Smart Home and IoT Peripherals PCA9518APW Related five-channel I2C hub family member Usado em: Industrial Sensor Aggregation, Programmable Logic Crossbar, Smart Home and IoT Peripherals PCA9518PWR NXP Semiconductors Usado em: Embedded Control Module Expansion, Test and Measurement Front Ends, Compact Computer Peripherals PCA9518DBR Texas Instruments Usado em: Embedded Control Module Expansion, Test and Measurement Front Ends PCA9545AD,118 Related four-channel I2C switching interface Usado em: Compact Computer Peripherals
What is the PCA9518DWT and what does it do?
The PCA9518DWT is a five-channel bidirectional I2C and SMBus buffer hub that divides one controller-side bus into five downstream channels. Texas Instruments describes it as a 5-channel, 3 V to 3.6 V expandable 400 kHz buffer operating in a 20-pin SOIC package. Each branch can accommodate up to 400 pF, allowing separate bus groups to be populated without placing every peripheral on one shared capacitive node.
What are the key specifications of PCA9518DWT that engineers should know?
The PCA9518DWT provides five downstream channels, bidirectional SDA and SCL buffering, a 3 V to 3.6 V operating range, and operation up to 400 kHz. The Texas Instruments product page identifies each separated bus group as supporting up to 400 pF. These characteristics make the device useful for extending I2C or SMBus systems where device count, cable length, or accumulated branch capacitance would burden a single unbuffered bus.
Where can I download the PCA9518DWT datasheet PDF?
The official PCA9518 datasheet is available from Texas Instruments through the manufacturer datasheet link on this page. It is the appropriate document for the pin description, electrical characteristics, timing diagrams, application circuit, and recommended operating conditions. Use the manufacturer document rather than an unofficial mirror when designing a production PCB or checking the behavior of disabled channels and bus capacitance.
Where can I find the PCA9518DWT pinout?
The PCA9518DWT uses a 20-pin SOIC package, and its numbered pin assignments are shown in the official Texas Instruments datasheet. Use the pin-description table to identify SDA, SCL, supply, ground, enable, reset, and channel connections for the exact revision ordered. The package drawing on this page identifies the physical footprint, while the datasheet remains the controlling document for electrical pin functions.
Where to buy PCA9518DWT online?
Use the Request a Quote form on this page to ask for PCA9518DWT availability, package quantity, and current lead time. Quote requests let the XAIPART team confirm the exact 20-pin SOIC ordering option and supply conditions against your project requirements. The MPN should be submitted without substituting another hub, since channel count, enable behavior, and bus architecture must all be confirmed before purchase.
What is the price of PCA9518DWT?
Current PCA9518DWT pricing depends on order quantity, packaging, and supply status, so submit the exact MPN through the Request a Quote form on this page. The request should state your required quantity, target date, and acceptable packing format. This avoids treating a historical quantity-break figure as a live commitment and enables confirmation of the correct 20-pin SOIC device.
What is the lead time for PCA9518DWT?
The current lead time for PCA9518DWT should be confirmed through the Request a Quote form on this page. Include your required quantity, forecast schedule, and production or prototype stage so supply can be evaluated against the appropriate timeline. For an active design, also confirm that the quoted suffix is PCA9518DWT and that the requested delivery configuration matches the package used on your PCB.
Is PCA9518DWT in stock?
Stock for PCA9518DWT is subject to current inventory and replenishment conditions. Use the Request a Quote form on this page to request a stock confirmation for the exact MPN and required quantity. Include a target delivery date in the request, particularly when the hub is needed for PCB assembly scheduling or a production ramp.
PCA9518DWT versus PCA9545AD: which is better for I2C expansion?
The PCA9518DWT is the better choice when the design requires five bidirectional I2C channels and up to 400 pF per separated group. The PCA9545AD is described as a four-channel I2C-bus switch with interrupt and reset logic, so it is not a pin-for-pin equivalent and should not replace the PCA9518DWT directly. Select according to the required channel count, control functions, package, and bus topology rather than treating both as identical expanders.
What is the difference between PCA9518DWT and PCA9518PW?
Both devices are associated with the PCA9518 five-channel I2C/SMBus hub family, but the ordering suffix identifies different package options rather than an identical 20-pin SOIC assembly. The PCA9518DWT is the 20-SOIC variant identified by Texas Instruments and the distributor listing, while PCA9518PW uses a different package code. Do not assume the footprint is interchangeable; compare the mechanical drawing and pin mapping before substitution.
When should I choose PCA9518DWT over a smaller I2C switch?
Choose the PCA9518DWT when one controller must reach five independently buffered I2C branches and each group may carry up to 400 pF. A smaller switch is appropriate when fewer channels are needed, isolated branch selection is the primary function, or interrupt and reset behavior match the system better. The five-channel architecture also simplifies fan-out compared with chaining several switches, provided timing and capacitance remain within limits.
Is PCA9518DWT suitable for sensor aggregation and industrial control systems?
The PCA9518DWT is suitable for sensor aggregation and industrial control systems that use 3 V to 3.6 V I2C or SMBus devices at up to 400 kHz. Its five buffered channels can separate peripheral groups and reduce loading on the controller-side bus. For industrial deployments, verify temperature rating, isolation requirements, surge exposure, grounding, and cable behavior before releasing the design.
What can replace PCA9518DWT as a drop-in part?
No additional drop-in replacement can be confirmed from the available manufacturer and cross-reference information. A valid replacement must use the same 20-pin SOIC footprint, remain pin-to-pin compatible, preserve the five-channel bidirectional architecture, support 3 V to 3.6 V operation at 400 kHz, and provide equivalent enable and reset behavior. Similar I2C switches are not automatically drop-in replacements.
Is PCA9518 the same as PCA9518A?
No, PCA9518 and PCA9518A are related family designations but should not be assumed electrically identical. The PCA9518 family provides a five-channel bidirectional I2C/SMBus hub, while an A-version may include revision-specific functional changes that must be reviewed in its datasheet. Use the ordered MPN and manufacturer ordering information to determine whether a particular variant preserves the required pin functions.
How should pull-up resistors and PCB routing be handled around PCA9518DWT?
Place pull-up resistors on the controller-side bus and on each downstream branch according to the bus voltage, capacitance, and rise-time requirements. Keep SDA and SCL traces short, route them consistently, and minimize branches that are not used. Each enabled output branch should meet the 400 pF group limit and be checked for adequate rise time before the highest supported 400 kHz operating condition.

Dados de referência de engenharia para PCA9518DWT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the PCA9518DWT when the design needs one upstream I2C or SMBus connection distributed across five downstream branches, each permitted to carry up to 400 pF at a maximum rate of 400 kHz. It is particularly effective when peripheral groups must be separated for capacitance control, troubleshooting, or independent enable management. Do not choose a generic four-channel I2C switch when five channels are required, and do not treat a different package or functionally related PCA9518 ordering option as a direct drop-in replacement. For an existing PCB, verify the 20-pin SOIC footprint, numbered pin functions, 3 V to 3.6 V supply compatibility, enable polarity, reset behavior, and power-up configuration. If a direct substitute is mandatory, obtain manufacturer or distributor cross-reference confirmation for the exact alternative before releasing the BOM; a similar bus-management function alone is insufficient.

Comparação com alternativas

Parâmetro Este produto
Package 20-pin SOIC
Brand Texas Instruments
Device Type Expandable five-channel I2C/SMBus buffer hub
Number of Channels 5
Operating Supply Voltage 3 V to 3.6 V
Maximum Bus Frequency 400 kHz
Maximum Capacitance per Group 400 pF
Signal Direction Bidirectional SDA and SCL
Power-Up or Reset Configuration Supported
Enable or Shutdown Function Supported

Principais diferenciais

  • Five-channel buffered fan-out (vs PCA9545AD,118)
  • Higher per-group capacitance accommodation (vs PCA9545AD,118)
  • Bidirectional bus buffering with shutdown control (vs PCA9545AD,118)

Notas de projeto

Route the controller-side SDA and SCL connections directly to the hub, then assign a separate downstream route for each enabled channel. Keep each SDA and SCL pair on consistent PCB layers and minimize stubs and vias. The hub can isolate bus groups electrically, but long branches can still behave like transmission lines; confirm rise time and ringing with the intended peripheral population rather than relying only on the 400 pF group limit.

Determine pull-up placement for the controller-side bus and every downstream branch. The correct resistor value depends on the 3 V to 3.6 V bus voltage, total branch capacitance, pull-up current, and the required rise time at 400 kHz. Do not duplicate strong pull-ups across every branch without checking the aggregate sink current seen by the driver. Verify enable and shutdown sequencing so partially powered peripherals cannot drive an inactive channel during startup.

Do not treat a four-channel switch as a substitute for this five-channel hub. Confirm the 20-pin SOIC footprint, numbered pins, supply pins, ground connections, channel functions, enable polarity, reset behavior, and voltage range before approving any substitute. Similar operating descriptions do not establish pin-to-pin compatibility. For production purchasing, require the exact MPN or manufacturer confirmation that the alternative retains every function required by the target PCB.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product page or lot documentation.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PCA9518DWT datasheet PCA9518DWT datasheet pdf PCA9518DWT pinout PCA9518DWT specifications PCA9518DWT 20-SOIC PCA9518DWT equivalent PCA9518DWT replacement PCA9518DWT cross reference PCA9518DWT vs PCA9545AD Texas Instruments PCA9518DWT PCA9518DWT price PCA9518DWT stock PCA9518 five-channel I2C hub PCA9518DWT sensor aggregation PCA9518DWT footprint

Componentes & termos relacionados

Texas Instruments PCA9518DWT PCA9518 PCA9518A PCA9518PW PCA9518PWR PCA9518APW PCA9518DBR PCA9545AD,118 I2C SMBus bidirectional buffer I2C hub interface IC semiconductor SDA SCL 400 kHz I2C 400 pF bus capacitance 20-pin SOIC surface-mount package enable or shutdown function power-up or reset configuration RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ