NXP Semiconductors

PCA9641BSHP - 2-Channel I2C Master Arbiter | NXP

N.º da peça: PCA9641BSHP ✓ Ativo
16-pin HVQFN with exposed pad Package
MOQ: 1 |

PCA9641BSHP Visão geral

The NXP PCA9641BSHP is a 2-channel I2C controller arbiter and 2-to-1 I2C demultiplexer designed for reliable systems in which two bus controllers can issue commands simultaneously. It selects a winning controller, allows that controller to operate without interruption, and gives the losing controller control of the I2C bus after the winner releases it. The device is supplied in a 16-pin HVQFN package with an exposed pad and tape-and-reel packaging.

An I2C controller arbiter is an interface-management IC that coordinates access to a shared two-wire bus. It belongs to the hierarchy of I2C interface devices, serial bus controllers, bus arbiters, and interface ICs. Unlike a conventional I2C multiplexer, which routes one controller toward one of several downstream buses, the PCA9641 permits two controllers to share a common downstream bus while managing simultaneous access and arbitration timing.

The PCA9641BSHP is intended for dual-controller architectures requiring deterministic bus ownership. Its central function is to select one master when both masters request the bus, allow the selected master to complete its transfer uninterrupted, and subsequently let the other master gain control. This behavior supports systems in which independent controllers, such as a processor and an auxiliary controller, must coexist on one I2C bus without placing both on the bus simultaneously.

The 16-HVQFN construction supports compact PCB layouts while its exposed thermal pad provides a means for heat spreading and, where required, electrical connection to the ground reference specified by the manufacturer. Because the exposed-pad connection and layout requirements are package- and board-specific, PCB designers should follow the land pattern and thermal guidance in the NXP manufacturer datasheet rather than treating the pad as an unrestricted signal terminal.

Typical uses include industrial control modules, embedded automation boards, dual-processor equipment, sensor systems, and communication equipment in which two embedded controllers must arbitrate access to one shared I2C segment. The arbiter role is particularly valuable when independent control loops or operating systems could otherwise generate overlapping bus activity. It is also suitable for bus-isolation architectures where downstream devices must not see simultaneous controller commands.

Design consideration: arbitration timing, bus timeout behavior, pull-up placement, and controller compatibility determine whether the system remains reliable during simultaneous requests. Follow the NXP datasheet for master arbitration timing, reset behavior, electrical limits, and the recommended exposed-pad layout. Confirm that both connected controllers observe the intended bus ownership and release behavior before integrating the device into a safety- or uptime-critical system.

This product page combines the verified NXP device description, package information, distributor records, technical application guidance, and a strict drop-in-replacement assessment. It distinguishes confirmed characteristics from parameters that require confirmation from the manufacturer datasheet, helping engineers evaluate the PCA9641BSHP without treating unverified electrical assumptions as design facts.

Alternativas drop-in para PCA9641BSHP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

PCA9641BSHP Especificações

Product Type 2-channel I2C controller arbiter and demultiplexer
Channel Count 2 channels
Bus Topology 2-to-1 I2C controller demultiplexer
Arbitration Function Supported; one winning controller is selected
Simultaneous Master Handling Supported for dual-controller I2C-bus applications
Faixa de temperatura de operação -40 °C to +85 °C
Encapsulamento 16-pin HVQFN with exposed pad
Package Dimensions 3 mm × 3 mm
Tipo de montagem Surface mount
Packaging Tape and reel
Contagem de pinos 16 pins

Guia de Configuração de Pinos do PCA9641BSHP 3 mm × 3 mm

Configuração de pinos para PCA9641BSHP (pacote 3 mm × 3 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 3 mm × 3 mm para PCA9641BSHP

Nenhum dado detalhado de pinagem disponível para PCA9641BSHP.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PCA9641BSHP é adequado para 6 aplicaçãos: Dual-Processor Industrial Control, Robotics Sensor Coordination, Smart Sensor Hub, Communication Equipment Control, Automotive Accessory Controller, Test and Measurement Controller.

🏭

Dual-Processor Industrial Control

The PCA9641BSHP fits industrial controller assemblies in which a main processor and an auxiliary controller may both address sensors or actuators through one shared I2C segment. Its arbitration function selects a winning controller during a simultaneous request and allows that controller to complete the transaction without interruption. The 16-pin HVQFN body also preserves board area in compact control modules. Integration still requires validation of master timing, reset sequencing, pull-up placement, and the exposed-pad layout specified by NXP.

🏭

Robotics Sensor Coordination

The PCA9641BSHP can coordinate a primary robot controller and a secondary motion or safety controller sharing an I2C sensor network. When both controllers request the bus simultaneously, the arbiter selects one winner and prevents overlapping commands from reaching the shared segment. This is useful where actuator and sensor state must remain deterministic despite asynchronous controller activity. The device should be placed close to the shared bus branch, with pull-ups and routing checked against the electrical and timing conditions in the manufacturer datasheet.

🧩

Smart Sensor Hub

The PCA9641BSHP is applicable to smart sensor hubs where two embedded controllers need coordinated access to a common sensor bus. Its 2-to-1 controller demultiplexer and arbitration function separate bus ownership from downstream access, reducing the likelihood that simultaneous controller traffic will collide. The 3 mm × 3 mm HVQFN package supports compact sensor assemblies, while the exposed pad requires the prescribed PCB footprint and thermal treatment. Firmware must account for the losing controller being unable to use the shared bus until ownership changes.

🌐

Communication Equipment Control

The PCA9641BSHP supports communication modules in which a network processor and a configuration controller share an I2C management bus. The arbitration function helps maintain deterministic command delivery if both controllers become active together, while the compact HVQFN package limits the footprint in dense line cards and edge equipment. Designers should verify cable-length limits, bus capacitance, pull-up values, reset behavior, and arbitration timing for the final topology. The device does not replace protocol isolation or level translation when those functions are required.

🚗

Automotive Accessory Controller

The PCA9641BSHP can manage access to a shared I2C bus in automotive accessory or body electronics modules when two controllers require coordinated ownership. Its -40 °C to +85 °C operating range covers industrial-temperature applications, although automotive qualification requirements must be checked separately for the exact ordered device. The small 16-pin HVQFN package is useful in dense control units. Firmware and hardware validation should include simultaneous startup, bus recovery after reset, and fault behavior when one controller becomes unresponsive.

🖥️

Test and Measurement Controller

The PCA9641BSHP is appropriate for test and measurement instruments that use one I2C bus to connect a main controller with an acquisition, calibration, or front-end controller. Arbitration gives the active device exclusive use of the shared bus during overlapping commands, supporting predictable test sequencing. Its compact package fits instrument control boards without requiring a large demultiplexer footprint. System validation should include worst-case bus timing, timeout behavior, firmware retry strategies, and the ground connection required for the HVQFN exposed pad.

What is the PCA9641BSHP?
The PCA9641BSHP is a 2-channel I2C controller arbiter and 2-to-1 I2C demultiplexer from NXP Semiconductors. According to the NXP manufacturer datasheet, it selects a winner when two I2C controllers issue commands simultaneously, lets that controller work uninterrupted, and enables the losing controller to take control afterward. The device is packaged in a 16-pin HVQFN with an exposed pad.
What is the difference between an I2C arbiter and a conventional I2C multiplexer?
An I2C arbiter coordinates competing controllers on one shared bus, whereas a conventional multiplexer selects one downstream branch for a controller. The PCA9641BSHP combines a 2-to-1 controller demultiplexer with an arbitration function for dual-controller systems. Its two controller inputs are not simply independent bus masters because the arbitration logic determines which controller may use the shared downstream bus at a given time.
How does PCA9641BSHP arbitrate between two I2C controllers?
The PCA9641BSHP selects a winning controller when both controllers request access simultaneously and allows the winner to continue without interruption. The loser does not operate on the shared bus during that transaction. After the winning master releases the bus, control can pass to the other master, allowing the system to preserve deterministic bus ownership during overlapping requests.
Where can I download the PCA9641BSHP datasheet PDF?
The official PCA9641 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/PCA9641.pdf. It is the primary document for electrical limits, arbitration timing, pin descriptions, recommended operating conditions, and the 16-pin HVQFN land pattern. Use the manufacturer document rather than a distributor mirror when making pin assignments or validating timing margins.
Where can I find the PCA9641BSHP pinout?
The PCA9641BSHP pinout is documented in the pin-description table of the NXP PCA9641 manufacturer datasheet. The device uses a 16-pin HVQFN with an exposed pad, and the exposed pad must also be handled according to the package drawing and layout instructions. Assign PCB tracks from the manufacturer pin table rather than inferring controller, arbitration, or ground connections from the package outline.
What package and temperature range does PCA9641BSHP use?
The PCA9641BSHP uses a 16-pin HVQFN package measuring 3 mm × 3 mm and is supplied tape and reel. The verified product specification states an operating temperature range of -40 °C to +85 °C. It is a surface-mount device with an exposed pad intended for the package-specific layout and thermal treatment described by NXP.
PCA9641BSHP vs PCA9557BS,118 - which device is the I2C master arbiter?
The PCA9641BSHP is the two-channel I2C master arbiter, while the PCA9557BS,118 is an 8-bit I2C or SMBus I/O port with reset. Although both are associated with 16-pin QFN packages and the same manufacturer, they implement different interface functions. The PCA9641 is appropriate for resolving simultaneous controller access; the PCA9557 is appropriate for adding eight general-purpose I/O lines.
When should I choose the PCA9641BSHP instead of a basic I2C multiplexer?
Choose the PCA9641BSHP when two embedded controllers must share one downstream I2C bus and may request access at the same time. A basic multiplexer is more appropriate when one controller must be routed among separate downstream branches without dual-master arbitration. The PCA9641 adds bus-ownership logic for high-reliability dual-controller systems rather than merely isolating bus segments.
Can PCA9641BSHP be used in a dual-processor embedded system?
The PCA9641BSHP is suitable for a dual-processor embedded system when both processors act as I2C controllers for a shared downstream bus. Its arbitration function selects one controller during a simultaneous request and preserves uninterrupted operation for that master. System designers must still validate controller timing, reset sequencing, pull-up implementation, and recovery behavior against the manufacturer requirements.
What is the best drop-in replacement for PCA9641BSHP?
No drop-in replacement is confirmed by the available cross-reference records for the PCA9641BSHP. The PCA9557BS,118 and PCA9500BS appear in comparison listings, but they perform different I/O or interface functions and are not automatically pin-compatible replacements. Use the Request a Quote form on this page to discuss exact-MPN sourcing, and require a manufacturer pin-to-pin comparison before approving any substitution.
Is there an NXP equivalent for PCA9641BSHP in the same 16-pin HVQFN package?
The verified manufacturer information confirms the PCA9641BSHP package and function, but it does not identify another NXP MPN as a pin-to-pin equivalent in that package. Packaging-code variants are not treated as engineering alternatives unless their electrical function, pin map, arbitration behavior, and thermal requirements are identical. The Request a Quote form on this page is the appropriate route for checking availability and sourcing support for this exact MPN.
Where can I buy PCA9641BSHP and check its current lead time?
The Request a Quote form on this page is the route for current PCA9641BSHP commercial terms, stock status, and lead time. The verified listings identify the exact 16-pin HVQFN tape-and-reel part, but their excerpts do not provide a qualifying quantity-break price table or a confirmed current inventory figure. Submit the exact MPN and required quantity so the sourcing team can respond with current procurement information.
What is the current price of PCA9641BSHP?
Use the Request a Quote form on this page for the current commercial price of PCA9641BSHP. The available listings do not print an exact-MPN quantity-break price schedule, so no current price table is represented as structured pricing on this page. Commercial terms may depend on quantity, package form, procurement volume, and available inventory.
Is PCA9641BSHP in stock?
Current stock status for PCA9641BSHP should be confirmed through the Request a Quote form on this page. The verified distributor excerpts show that the part is cataloged, but they do not establish a reliable current stock count for the exact MPN. Request quantity, scheduled delivery, and packaging requirements when asking for availability.
What are the key specifications of PCA9641BSHP that engineers should know?
The key confirmed characteristics are a 2-channel I2C controller arbiter, 2-to-1 demultiplexer operation, simultaneous-master handling, a 16-pin HVQFN package with exposed pad, 3 mm × 3 mm body size, -40 °C to +85 °C operating range, and tape-and-reel packaging. Supply voltage, bus rate, quiescent current, reset timing, and detailed pin functions must be confirmed from the NXP manufacturer datasheet before schematic completion.

Dados de referência de engenharia para PCA9641BSHP — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the PCA9641BSHP when a system requires two I2C controllers to share one downstream bus and arbitration must determine which controller receives uninterrupted access. Its 16-pin HVQFN package, 3 mm × 3 mm body, and -40 °C to +85 °C operating range suit compact industrial or embedded systems. It is not a general-purpose I/O expander or a conventional 1-to-many bus multiplexer. No pin-compatible substitute has been confirmed, so an existing PCA9641BSHP footprint should normally be retained unless a manufacturer provides explicit pin mapping, timing, and arbitration equivalence. Before committing, verify supply voltage, I2C speed, reset requirements, exposed-pad connection, and controller behavior from the NXP datasheet.

Notas de projeto

Do not treat a generic 16-pin QFN multiplexer as a functional replacement for the PCA9641BSHP. The PCA9641 arbitrates simultaneous requests from two controllers, while parts such as the PCA9557BS,118 provide an 8-bit I/O port and PCA9500BS provides a different I2C or SMBus interface. Before substitution, compare every pin, supply limits, reset behavior, arbitration timing, input thresholds, output contention behavior, and exposed-pad requirements.

Use the exact 16-pin HVQFN land pattern and exposed-pad treatment from the NXP package drawing. Place the device near the shared downstream bus branch and route controller inputs so their physical channel assignment matches the intended arbitration design. Keep the exposed-pad copper and via arrangement consistent with the manufacturer's layout guidance, and review how the pad is connected to ground on the final board stack-up.

Validate pull-up resistance, bus capacitance, rise and fall times, and the worst-case timing when both controllers request access. The arbitration function controls ownership but does not remove the need for a compliant I2C physical layer. Use oscilloscope measurements during simultaneous startup and controller reset tests, and ensure firmware cannot assume that an immediate second transfer will always be accepted.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The operating temperature range is stated, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was confirmed. AEC-Q100 qualification is not applicable to the standard commercial part based on the verified ordering information.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PCA9641BSHP datasheet PCA9641BSHP datasheet pdf PCA9641BSHP pinout PCA9641BSHP equivalent PCA9641BSHP replacement PCA9641BSHP cross reference PCA9641BSHP price PCA9641BSHP stock NXP PCA9641BSHP PCA9641BSHP 16 HVQFN PCA9641BSHP I2C arbiter PCA9641BSHP vs PCA9557BS

Componentes & termos relacionados

NXP Semiconductors PCA9641BSHP PCA9641 PCA9557BS,118 PCA9500BS PCA9641BS I2C controller arbiter I2C demultiplexer I2C bus SMBus dual-controller arbitration simultaneous master handling bus ownership interface IC serial bus controller HVQFN-16 QFN family surface mount SMD exposed pad industrial control sensor network dual-processor system I2C signal buffering bus recovery
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ