PCM1794DB-BB 24-Bit 192kHz Stereo DAC | Texas Instruments
N.º da peça: PCM1794DB-BB ✓ AtivoPCM1794DB-BB Visão geral
A digital-to-analog converter, or DAC, is an integrated circuit that converts digital audio samples into proportional analog voltage or current signals. The PCM1794 belongs to the stereo DAC hierarchy within audio conversion ICs, where it supports bridges between digital audio sources, analog output stages, amplifiers, headphones, and loudspeakers. Its balanced current outputs allow the analog circuitry to be optimized for either balanced or single-ended signal paths.
The principal features of the PCM1794 include 24-bit resolution, operation up to 192 kHz, stereo balanced current outputs, hardware control, and a stated 132 dB SNR. These characteristics support high-resolution audio paths where channel separation, low distortion, and accurate reproduction of digital source material are important. The converter uses data-weighted averaging to reduce noise caused by DAC element mismatch and includes a third-order delta-sigma modulator as part of its digital signal-processing architecture.
The PCM1794 is a monolithic CMOS integrated circuit containing two stereo digital-to-analog converter channels and associated support circuitry. Its advanced segment DAC architecture improves dynamic performance while reducing sensitivity to clock jitter. The 28-SSOP package provides a compact surface-mount option for digital audio equipment, while current outputs provide flexibility in the design of the subsequent analog conversion and output-amplifier stages.
Typical uses include high-resolution CD and DVD player digital output sections, professional audio interfaces, digital mixing consoles, broadcast equipment, sound-card output stages, and premium home-audio products. It can also serve as a reference-quality digital-to-analog stage in equipment that accepts an I2S source and requires a balanced analog output. The system clock, digital input routing, analog output network, and output amplifier must be designed together to preserve the converter's intended performance.
Layout is especially important because this device converts high-resolution digital audio into a low-level analog signal. Place the digital interface and analog output components according to the manufacturer datasheet, keep return-current paths controlled, and use suitable filtering for the selected output topology. Component tolerances, clock quality, grounding, and connector implementation can materially affect the final signal-to-noise and distortion performance.
This page combines the manufacturer's core PCM1794 specifications with a package-oriented view of sourcing and replacement. It identifies a directly related 28-SSOP option, summarizes the technical constraints that matter during PCB design, and distinguishes the PCM1794DB-BB from other stereo DACs that may share a package without sharing a pin-compatible interface.
Alternativas drop-in para PCM1794DB-BB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PCM1794DB-BB (mesmo formato e footprint) — diferindo em Converter Type.
PCM1794DB
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1794DB-BB Classificações máximas e características elétricas
| Converter Type | Stereo digital-to-analog converter |
| Resolução | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 132 dB |
| Channel Configuration | 2-channel stereo |
| Supported Digital Audio Formats | I2S, PCM, and left-justified |
| DAC Architecture | Advanced segment DAC |
| Tipo de saída | Balanced current output |
| Control Method | Hardware control |
| Process Technology | CMOS |
| Encapsulamento | 28-lead SSOP |
| Logic Supply Voltage | 3 V to 3.6 V |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Modulator Order | Third-order delta-sigma |
| Mismatch Reduction | Data-weighted averaging |
| Tipo de montagem | Surface mount |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Guia de Configuração de Pinos do PCM1794DB-BB 28-lead ssop
Configuração de pinos para PCM1794DB-BB (pacote 28-lead ssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PCM1794DB-BB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PCM1794DB-BB é adequado para 6 aplicaçãos: High-Resolution Audio Interface, Professional Mixing Console, Digital Audio Player, Broadcast and Studio Equipment, Sound Card and USB Audio, Premium Home-Audio Equipment.
High-Resolution Audio Interface
PCM1794DB-BB fits a high-resolution stereo output section because it combines 24-bit conversion, operation up to 192 kHz, and a stated 132 dB SNR in a 28-SSOP package. The balanced current outputs provide flexibility for designing either balanced or single-ended analog paths. Its I2S and PCM interfaces can connect a digital audio engine to an output stage without using a lower-resolution consumer DAC. Clock quality and supply decoupling remain important because they directly influence the converter's audio performance.
Recomendado
Professional Mixing Console
A professional mixing console can use PCM1794DB-BB for monitoring or auxiliary output channels that require 24-bit digital audio at rates up to 192 kHz. The 132 dB stated SNR supports low-noise monitoring paths, while balanced current outputs allow the board designer to choose the analog topology most suitable for the channel's signal level and grounding. Use a clean digital interface and carefully terminated output network so switching converters and long data routes do not compromise the DAC output.
Recomendado
Digital Audio Player
PCM1794DB-BB is appropriate for a premium digital player that accepts 24-bit PCM data and needs a high-performance stereo analog output. Its 192-kHz capability supports high-resolution source formats, while the advanced segment DAC architecture is designed to improve dynamic performance and clock-jitter tolerance. The converter is normally followed by an I/V and low-pass-filter network or a suitable current-to-voltage stage. Component selection in that analog path is critical for preserving the converter's stated SNR and channel separation.
Recomendado
Broadcast and Studio Equipment
Broadcast racks and studio monitoring products can use PCM1794DB-BB to convert digital studio audio into analog line-level signals. The 24-bit, 192-kHz capability accommodates high-resolution workflows, while balanced current outputs support balanced routing commonly used in professional environments. The 28-SSOP format also suits compact multi-channel boards, although each converter still needs adequate routing, supply planning, and output-stage design. Verify clock synchronization with the rest of the studio signal chain.
Recomendado
Sound Card and USB Audio
PCM1794DB-BB can serve in a sound card that requires a dedicated high-resolution stereo DAC rather than a basic multimedia converter. Its I2S interface suits digital audio engines operating at 24-bit resolution, and the 192-kHz maximum rate supports high-resolution playback paths. Because a USB audio interface may include several digital and analog domains on one board, isolate supply returns and maintain short, controlled clock and data routes. The balanced current outputs give the analog designer additional routing options.
Recomendado
Premium Home-Audio Equipment
PCM1794DB-BB is suitable for premium home-audio products requiring a discrete, high-performance stereo DAC stage. The 132 dB stated SNR provides a strong foundation for low-noise playback, while balanced current outputs can support an optimized analog output network. The converter's 24-bit interface preserves source detail when paired with a transport or digital audio processor operating at compatible rates. Placement near the rear connector and careful ground partitioning can help reduce digital coupling into the sensitive analog section.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PCM1794DB-BB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PCM1794DB |
|---|---|---|
| Package | 28-SSOP | 28-SSOP |
| Brand | Texas Instruments | Texas Instruments |
| Converter Type | Stereo digital-to-analog converter | Stereo digital-to-analog converter |
| Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Signal-to-Noise Ratio | 132 dB | 132 dB |
| Digital Audio Interfaces | I2S, PCM, and left-justified | I2S, PCM, and left-justified |
| Output Configuration | Balanced current outputs | Balanced current outputs |
| DAC Architecture | Advanced segment DAC | Advanced segment DAC |
| Logic Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V |
| Analog Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Control Method | Hardware control | Hardware control |
Principais diferenciais
- Matches the directly related PCM1794DB in core conversion specifications (vs PCM1794DB)
- Supports flexible digital source integration (vs PCM1794DB)
- Balanced current outputs support multiple analog topologies (vs PCM1794DB)
Notas de projeto
Follow the manufacturer datasheet layout for the 28-SSOP PCM1794, including the recommended input, output, and bypass-capacitor placements. Keep the digital interface and clock routes away from the current-to-voltage and reconstruction-filter components. Treat the analog output network as a high-impedance, noise-sensitive stage because small ground-current paths can affect distortion and channel separation.
Use separate, well-decoupled analog and digital supply paths where the board architecture permits. The documented logic range is 3 V to 3.6 V, while the analog range is 4.75 V to 5.25 V. Place the manufacturer-recommended bypass capacitors directly at the relevant supply pins and keep high-current return paths out of the analog ground reference.
Provide a low-jitter clock because the PCM1794's advanced segment architecture is specifically associated with improved clock-jitter tolerance. Avoid routing the digital data interface through long traces adjacent to the analog output network. Confirm source levels and data timing against the manufacturer interface specifications before enabling the audio path.
Do not select another 28-lead stereo DAC solely because its package matches; pin functions, interface timing, supply levels, and output architecture must also match. Similarly, do not assume that identical SNR and sampling-rate headlines guarantee equivalent system performance. The analog reconstruction filter, output amplifier, clock source, grounding, and PCB layout determine the final audible and measured results.
Informações de conformidade
The available product and datasheet records do not state the requested compliance declarations. AEC-Q100 is treated as not applicable because this is a consumer audio converter rather than an automotive-qualified device.