Texas Instruments

PCM1795DB - 32-Bit 192kHz Stereo DAC | Texas Instruments

N.º da peça: PCM1795DB ✓ Ativo
4.75V to 5.25V Vdss 28-pin SSOP Package 256 fS Speed
MOQ: 1 |

PCM1795DB Visão geral

Texas Instruments PCM1795DB is a 32-bit, 192kHz sampling, Advanced Segment stereo audio digital-to-analog converter in a 28-pin SSOP package. It provides two DAC channels with a typical signal-to-noise ratio of 123 dB, accepts PCM and DSD audio data, and supports I2C, SPI, and TDM control interfaces. Its analog output stage operates from a 4.75V to 5.25V supply.

An audio DAC is a signal-conversion IC that transforms digital audio samples into left and right analog voltage signals. The DAC hierarchy includes audio converters, digital-to-analog converters, and interface ICs. This function allows digital audio sources, such as streaming systems, CD players, and network audio equipment, to drive analog amplifiers, powered speakers, headphones, and line-level audio stages.

The PCM1795DB uses Texas Instruments Advanced Segment DAC architecture to combine 32-bit data handling with 192kHz sampling capability. Its typical 123 dB SNR supports high-resolution audio reproduction, while the two-channel output avoids requiring separate DAC devices for stereo playback. Serial control through I2C, SPI, or TDM provides flexibility for system integration and configuration.

The PCM1795DB accepts digital audio formats identified as PCM and DSD, making it suitable for designs that process conventional digital streams as well as DSD-compatible source signals. Its 28-pin SSOP package supports compact, surface-mount assembly. The 4.75V to 5.25V analog supply range is suitable for conventional 5V audio output stages, while the separate digital supply supports a 3.3V operating condition in the manufacturer test configuration.

Typical applications include high-resolution stereo audio DAC boards, CD and SACD player upgrades, network audio systems, digital mixing consoles, and headphone amplifier front ends. The component is also appropriate for powered speakers requiring a clean analog line output. Designers should pair it with a suitable analog output filter, low-noise clocking, decoupled supply rails, and an output amplifier selected for the target impedance.

Power-supply implementation is critical because the DAC performance depends on clean reference and analog rails. Place the manufacturer's recommended bypass capacitors close to the supply pins and keep digital clock and data routing away from the analog outputs. Keep the output path short, observe the analog and digital grounding strategy in the datasheet, and avoid adding circuitry that can compromise the converter's dynamic performance.

This page organizes the PCM1795DB specifications, application guidance, package information, and verified same-family alternatives. It also provides practical design notes for filtering, layout, power delivery, and output-stage integration, helping engineers evaluate the converter before beginning a high-performance audio design.

Alternativas drop-in para PCM1795DB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PCM1795DB (mesmo formato e footprint) — diferindo em Package, Digital Audio Interface, THD+N, Process Technology, Resolution.

Texas Instruments
Package: 28-lead SSOP, 0.209 in (5.30 mm) width
THD+N: 0.0004%
Process Technology: CMOS
Comparar com PCM1795DB →
Texas Instruments
Package: 28-lead SSOP (DB)
Digital Audio Interface: I2S
Process Technology: CMOS
Comparar com PCM1795DB →
Texas Instruments
Package: 28-lead SSOP
Digital Audio Interface: I2S, PCM, and left-justified
THD+N: 0.0004% typical
Comparar com PCM1795DB →
Texas Instruments
Package: 28-pin SSOP (DB)
Digital Audio Interface: PCM serial interface
Process Technology: Monolithic CMOS
Comparar com PCM1795DB →
Texas Instruments
Package: 28-lead SSOP
THD+N: 0.0005%
Process Technology: CMOS
Comparar com PCM1795DB →

PCM1796DB

✅ Drop-In
Texas Instruments
📦 28-pin SSOP
Stereo audio digital-to-analog converter · Advanced segment DAC · 24 bit · 192 kHz · 200 kHz · 123 dB · Balanced current outputs · PCM serial interface

Consulte o preço

Ver ficha técnica →

PCM1794DB

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 28-pin SSOP
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · Advanced segment DAC · Balanced current outputs · I2S, PCM, and left-justified · 5 V tolerant · VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V

Consulte o preço

Ver ficha técnica →

PCM1792DB

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 28-pin SSOP
Stereo audio digital-to-analog converter · Advanced segment DAC · 24 bit · 192 kHz · 200 kHz · 132 dB at 9 Vrms · 129 dB at 4.5 Vrms · 127 dB

Consulte o preço

Ver ficha técnica →

PCM1793DB

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 28-pin SSOP
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · I2S · Balanced voltage output · 113 dB · 0.001% · 2.1 V rms at the postamplifier

Consulte o preço

Ver ficha técnica →

PCM1798DB

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 28-pin SSOP
Stereo audio digital-to-analog converter · Advanced segment DAC · 24 bit · 200 kHz · 192 kHz · 123 dB · 0.0005% · Differential current output

Consulte o preço

Ver ficha técnica →

PCM1795DB Classificações máximas e características elétricas

Resolução 32 bit
Maximum Sampling Rate 200 kSPS
Manufacturer Sampling Rate 192 kHz
DAC Channels 2 channels
Typical DAC SNR 123 dB
Analog Output 2 channels
Digital Input Support PCM and DSD
Control Interface I2C, SPI, and TDM
Analog Supply Voltage 4.75V to 5.25V
Digital Supply Voltage 3.3 V test condition
System Clock Relationship 256 fS
Test Sampling Rate 48 kHz
Test Data Format 32-bit data
Encapsulamento 28-pin SSOP
Tipo de montagem Surface mount
Technology Advanced Segment DAC

Guia de Configuração de Pinos do PCM1795DB 28-pin ssop

Configuração de pinos para PCM1795DB (pacote 28-pin ssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 28-pin ssop para PCM1795DB

Nenhum dado detalhado de pinagem disponível para PCM1795DB.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PCM1795DB é adequado para 6 aplicaçãos: High-Resolution Network Audio Player, CD and SACD Player Upgrade, Digital Mixing Console Output Stage, Powered Speaker Line Output, Headphone Amplifier Front End, Digital Audio Interface and Monitor DAC.

🌐

High-Resolution Network Audio Player

The PCM1795DB fits a high-resolution network player because it converts two-channel PCM or DSD data with 32-bit resolution and supports sampling rates up to 192kHz. Its typical 123 dB SNR provides a high dynamic-range starting point for a line-output stage. Place the converter after the network audio decoder and clock interface, then use the manufacturer-recommended reconstruction filter before the output amplifier. The main design consideration is clock cleanliness: routing high-frequency digital signals away from the analog outputs and maintaining short output traces helps preserve the converter's noise performance.

🎧

CD and SACD Player Upgrade

PCM1795DB is appropriate for a CD or SACD player upgrade where a modern 32-bit, 192kHz-capable stereo DAC is desired. Its DSD support provides a path for compatible digital sources, while the 123 dB typical SNR supports quiet analog output behavior in a quiet listening environment. The converter should follow the player's digital audio and clock circuitry and precede the analog filter and line amplifier. Because the DAC uses a 28-pin SSOP package, the replacement board must preserve the exact footprint and comply with its pin-specific grounding and supply requirements.

🏭

Digital Mixing Console Output Stage

The PCM1795DB can provide a high-resolution stereo monitoring output in a digital mixing console. Two analog channels, 32-bit data handling, and support for 192kHz operation suit conversion of selected digital mixes before line amplification. Its I2C, SPI, and TDM control options provide several ways to configure the device within a larger audio system. Designers should budget for a clean analog supply, low-noise clocking, and correct common-mode handling. The output stage must also respect the PCM1795DB's 4.75V to 5.25V analog supply range.

🔊

Powered Speaker Line Output

PCM1795DB is suitable for a powered-speaker line-output board that requires a high-resolution stereo conversion stage. The device's two outputs, 32-bit capability, and 192kHz sampling support can feed a balanced or unbalanced input amplifier ahead of the speaker amplifiers. Its typical 123 dB SNR helps preserve low-level musical detail, but the complete signal chain determines the audible result. Use short analog paths, apply the specified output filtering, and confirm that the downstream amplifier accepts the converter's output amplitude and common-mode voltage.

🎧

Headphone Amplifier Front End

The PCM1795DB can form the digital-to-analog section of a high-resolution headphone amplifier. It supplies two analog channels at up to 192kHz sampling and provides DSD support for compatible sources, while its 28-pin SSOP package supports compact boards. The DAC output must be filtered and scaled before driving headphones, so use a voltage-controlled amplifier or passive attenuator when the operating point requires it. Headphone loading is sensitive to distortion and noise, making clean grounding and low-noise supply implementation central to the design.

💻

Digital Audio Interface and Monitor DAC

PCM1795DB works as the monitoring DAC in a digital audio interface that accepts PCM or DSD and offers a 192kHz-capable stereo output. Its I2C, SPI, and TDM control interfaces support integration with digital routing and configuration logic. The converter can feed meters, monitor selectors, and line-level amplification after appropriate filtering. Because the PCM1795DB has a 28-pin SSOP footprint and specific analog supply requirements, verify connector pin assignments, clock source compatibility, and analog grounding before finalizing the board layout.

What are the key specifications of PCM1795DB that engineers should know?
The PCM1795DB is a 32-bit, 192kHz stereo audio DAC with a typical SNR of 123 dB, PCM and DSD input support, and I2C, SPI, and TDM control. According to the Texas Instruments PCM1795 datasheet, the device provides two analog outputs and operates from a 4.75V to 5.25V analog supply. It is packaged in a 28-pin SSOP for compact surface-mount audio equipment.
Where to download the PCM1795DB datasheet PDF?
The official PCM1795DB datasheet PDF is available from the Texas Instruments product literature link at https://www.ti.com/lit/ds/symlink/pcm1795.pdf. The manufacturer product page at https://www.ti.com/product/PCM1795 provides ordering information, device parameters, and related technical documentation. Use the Texas Instruments PDF for pin assignments, electrical characteristics, application circuits, and recommended layout details.
Where can I find the PCM1795DB pinout?
Use the pin-description table and package drawing in the Texas Instruments PCM1795 datasheet to identify all 28 PCM1795DB pins. The manufacturer datasheet is the authoritative source for signal names, analog outputs, digital inputs, clock connections, supplies, and control signals. The device uses a 28-pin SSOP package, so verify the package drawing against the PCB footprint before laying out a replacement board.
What does PCM1795DB do in an audio system?
The PCM1795DB converts digital PCM or DSD audio streams into two analog stereo output channels. According to the Texas Instruments PCM1795 datasheet, the converter supports 32-bit data at up to 192kHz sampling and has a typical SNR of 123 dB. It is typically positioned after a digital audio interface and before an analog reconstruction filter, line-output stage, or headphone amplifier.
What is the output voltage range of PCM1795DB?
The PCM1795DB operates from a 4.75V to 5.25V analog supply, as stated in the Texas Instruments PCM1795 datasheet and distributor component listings. The same document identifies a 3.3V digital supply condition for its electrical test setup. The analog operating range should be treated separately from the supported digital audio input resolution and sampling rate.
Can PCM1795DB support DSD audio?
Yes, the PCM1795DB supports DSD as well as PCM digital audio data. According to the Texas Instruments product page and PCM1795 datasheet, this is a two-channel Advanced Segment audio DAC with I2C, SPI, and TDM control interfaces. DSD support does not mean every source can be connected directly; the source interface, clocking, format, and system configuration must be compatible.
PCM1795DB vs PCM1796DB - which is better for a stereo DAC upgrade?
The PCM1795DB is the stronger choice when 32-bit processing is the priority, while the PCM1796DB is primarily a lower-resolution alternative with a reported pin-compatible configuration. The Texas Instruments PCM1795 family supports 192kHz operation, and the PCM1795DB offers a typical 123 dB SNR. Choose PCM1795DB for maximum native resolution; verify the source format and software compatibility before selecting either device.
When should I choose PCM1795DB over PCM1794DB?
Choose PCM1795DB when the design benefits from its 32-bit processing and 192kHz sampling capability. PCM1794DB is a lower-resolution member of the same Advanced Segment family and is more appropriate when the source is 24-bit and the extra resolution of PCM1795DB adds no practical benefit. Both devices should be evaluated for clock, format, filtering, and output-stage compatibility.
Is PCM1795DB suitable for a high-resolution network audio player?
Yes, PCM1795DB is suitable for a high-resolution network audio player because it supports 32-bit data, 192kHz sampling, DSD input, and a typical SNR of 123 dB. It can feed a balanced or unbalanced analog output stage after the appropriate reconstruction filtering. The implementation should include clean clocking, decoupled supplies, short analog traces, and an output amplifier matched to the required load.
What is the best drop-in replacement for PCM1795DB?
The best-supported same-family choice is a compatible 28-pin SSOP Advanced Segment variant, but no universal drop-in replacement should be selected without reviewing its pinout and audio format support. PCM1796DB has reported pin compatibility, while other PCM179x options may differ in resolution, filtering, clocking, or control functions. Review each candidate against the Texas Instruments datasheet and verify its PCB footprint.
Can PCM1796DB replace PCM1795DB without changing the PCB?
A PCM1796DB may fit the same physical footprint because reported comparisons identify pin compatibility, but it is not an electrical equivalent for every 32-bit design. The key difference is resolution: PCM1795DB is a 32-bit converter, while PCM1796DB is commonly associated with a lower-resolution Advanced Segment configuration. Confirm clocking, supported formats, output behavior, and software settings before substitution.
What can replace PCM1795DB?
PCM1795DB can be replaced only after confirming same-package pin compatibility and acceptable differences in resolution, sampling rate, digital formats, filtering, and control. Same-family PCM179x devices are the closest candidates, including PCM1796DB, PCM1794DB, PCM1792DB, PCM1793DB, and PCM1798DB. No cross-brand equivalent with verified pin-to-pin compatibility was identified for this package, so PCB or firmware changes may be necessary for an alternative manufacturer.
Where to buy PCM1795DB online?
Use the Request a Quote form on this page to request PCM1795DB availability, current lead time, and order details. The exact PCM1795DB ordering code refers to the 28-pin SSOP tube configuration, while PCM1795DBR uses a different reel packing suffix. Quote the full manufacturer part number when requesting supply so the correct package and delivery format are matched.
What is the price of PCM1795DB?
Current PCM1795DB pricing should be obtained through the Request a Quote form on this page because quote-based sourcing and market conditions can change the commercial terms. Include the exact 28-pin SSOP tube ordering code and required quantity in the request. The structured price fields remain empty when no qualifying quantity-break listing is available for this exact suffix.
What is the lead time for PCM1795DB?
Request the current PCM1795DB lead time through the Request a Quote form on this page. Lead time can depend on the exact ordering suffix, requested quantity, and available manufacturer inventory. Because PCM1795DB and PCM1795DBR represent different delivery formats, confirm the package form along with the expected schedule rather than relying on a generic family-level estimate.

Dados de referência de engenharia para PCM1795DB — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PCM1795DB when the signal chain benefits from 32-bit data handling, 192kHz sampling, DSD support, and a typical 123 dB SNR. It is especially appropriate for high-resolution stereo DAC boards, network players, and premium audio upgrades where the source can use the additional resolution. PCM1796DB is the closest reported pin-compatible candidate when 24-bit operation is sufficient. PCM1794DB and PCM1792DB suit lower-resolution Advanced Segment designs, while PCM1793DB is useful when its family-specific functions better match the source and filtering requirements. PCM1798DB retains 32-bit resolution but uses a different implementation, so review its complete datasheet. For every alternative, verify the 28-pin SSOP footprint, power rails, clocking, digital formats, output behavior, and system configuration before approving a substitution.

Comparação com alternativas

Parâmetro Este produto PCM1796DB PCM1794DB PCM1792DB PCM1793DB PCM1798DB
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 32 bit 24 bit 24 bit 24 bit 24 bit 32 bit
DAC Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Architecture Advanced Segment DAC Advanced Segment DAC Advanced Segment DAC Advanced Segment DAC Advanced Segment DAC Advanced Segment DAC

Principais diferenciais

  • Higher native data resolution (vs PCM1796DB)
  • Full 192kHz sampling capability in the Advanced Segment family (vs PCM1794DB)
  • Broad digital audio input and configuration support (vs PCM1792DB)

Notas de projeto

Provide separate, well-decoupled analog and digital supplies in the ranges specified by the Texas Instruments PCM1795 datasheet. Place the required bypass capacitors at the corresponding supply pins and minimize loop area between each capacitor and the device. A 3.3V digital operating condition is shown in the manufacturer test setup, while the analog supply range is 4.75V to 5.25V. Do not infer that every rail must use the same voltage without reviewing the complete pin and supply tables.

Keep the left and right analog outputs short and symmetrically routed, and maintain a continuous ground reference beneath the converter and its filtering network. Route I2C, SPI, TDM, and system-clock signals away from the analog outputs to reduce capacitive coupling and jitter sensitivity. Follow the ground and component-placement arrangement in the manufacturer datasheet because changing the return path can degrade noise performance even when the schematic remains unchanged.

The PCM1795DB depends on accurate timing, so the system clock and digital audio interface must satisfy the datasheet timing requirements. When the converter is driven from a long cable or a noisy digital backplane, use a suitable receiver or isolation strategy rather than routing the clock directly across the board. For DSD or high-rate PCM operation, verify source compatibility, supported data format, and clock relationships in the complete digital audio design.

Do not confuse PCM1795DB with PCM1795DBR: the DB suffix identifies the tube configuration, while DBR identifies the tape-and-reel configuration. They are not distinct electrical designs, but the delivery format affects assembly and handling. When substituting another PCM179x device, check the full pin list, supply requirements, supported digital formats, clocking, output filtering, and software configuration rather than relying only on the SSOP pin count.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product literature confirms the device family and technical features but does not state the requested compliance classifications in the indexed material.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PCM1795DB datasheet PCM1795DB datasheet pdf PCM1795DB pinout PCM1795DB specifications Texas Instruments PCM1795DB PCM1795DB 28 pin SSOP PCM1795DB application circuit PCM1795DB vs PCM1796DB PCM1795DB drop-in replacement PCM1795DB equivalent PCM1795DB price PCM1795DB stock

Componentes & termos relacionados

Texas Instruments PCM1795DB PCM1796DB PCM1794DB PCM1792DB PCM1793DB PCM1798DB digital-to-analog converter audio DAC stereo DAC Advanced Segment DAC PCM audio DSD audio I2C SPI TDM signal-to-noise ratio 32-bit resolution 192kHz sampling 28-pin SSOP SSOP family surface-mount package audio reconstruction filter line-level output Texas Instruments PCM1795 datasheet
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ