Microchip Technology

PIC12F683-E/MF - 8-Bit 20MHz Flash MCU | Microchip

N.º da peça: PIC12F683-E/MF ✓ Ativo
2.0 V to 5.5 V Vdss 8-DFN-S (6 × 5 mm) Package 20 MHz Speed 3.5 KB (2K × 14 words) Memory
MOQ: 1 |

PIC12F683-E/MF Visão geral

The Microchip Technology PIC12F683-E/MF is an 8-bit CMOS flash microcontroller with a 20 MHz maximum operating frequency, 3.5 KB of program memory organized as 2K × 14 words, and 128 bytes of RAM. The device provides six general-purpose I/O pins and is housed in an 8-DFN-S surface-mount package measuring 6 × 5 mm. It operates from a 2.0 V to 5.5 V supply, making it suitable for compact low-power embedded control systems.

A flash-based microcontroller is a semiconductor that stores its programmed instructions in electrically erasable and reprogrammable nonvolatile memory. The PIC12F683 belongs to the PIC12 low-pin-count family and combines a small RISC instruction set, integrated data memory, on-board EEPROM, and mixed-signal sensing resources in a limited pin-count package. This combination makes it useful where board area, voltage range, and deterministic control are more important than high computational throughput.

Key features include an 8-bit processing core operating up to 20 MHz, 3.5 KB of flash program memory, 128 bytes of RAM, and a 4-channel 10-bit ADC. The six available I/O pins can support digital control, serial communication, status indication, and analog input multiplexing. On-board EEPROM allows calibration values, configuration parameters, counters, and operating-state information to be retained when power is removed without adding a separate memory component.

The PIC12F683-E/MF architecture is designed around the mid-range enhanced mid-range PIC core and its 14-bit instruction word organization. Although the family includes a larger 8K × 14 program-memory address space, only 2K × 14 words are physically implemented in this device. A 10-bit ADC provides four analog channels, while the operating range of 2.0 V to 5.5 V permits use in both 3.3 V and 5 V systems when the associated peripherals and timing are configured appropriately.

Typical applications include compact industrial controllers, building automation modules, appliance-control boards, battery-powered instruments, sensor interfaces, LED-control circuits, and low-cost embedded products. Its small 8-DFN-S footprint is especially useful when the enclosure provides little board area and the design can accommodate the package's exposed-pad and assembly requirements.

Layout and firmware planning should treat the ADC, oscillator configuration, unused pins, and exposed thermal pad as one integrated design task. Place input and output decoupling capacitors close to their supply pins, route analog inputs away from fast-switching nodes, and verify the assembled board against the manufacturer datasheet's pin and layout guidance.

This product page combines the exact PIC12F683-E/MF electrical identity, package information, programming considerations, qualified same-family alternatives, and practical design guidance into a compact engineering reference for initial design review and sourcing.

Alternativas drop-in para PIC12F683-E/MF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PIC12F683-E/MF (mesmo formato e footprint) — diferindo em Maximum CPU Frequency, Mounting Type, Package.

Microchip Technology
Maximum CPU Frequency: 20 MHz (200 ns instruction cycle)
Mounting Type: Surface Mount, Tape & Reel (T suffix)
Package: 8-DFN-S EP (6 x 5 mm) with exposed pad

PIC12F683-I/MF

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-DFN-S (6 × 5 mm)
Same 8-DFN-S 6 × 5 mm footprint, 20 MHz speed, 3.5 KB flash, 128-byte RAM, and 6 I/O pins; the ordering option changes the temperature grade, whose exact limits are

📋 Alternativa de referência (fora do catálogo)

PIC12F683-E/MF Classificações máximas e características elétricas

Microcontroller Type 8-bit CMOS flash microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 3.5 KB (2K × 14 words)
Program Counter Address Space 8K × 14 words, with 2K × 14 words physically implemented
RAM 128 bytes
EEPROM Data Memory 256 bytes
General-Purpose I/O 6 pins
Operating Voltage Range 2.0 V to 5.5 V
ADC Resolution 10 bits
ADC Channels 4 channels
Program Memory Type Flash
Architecture Enhanced mid-range PIC architecture
Instruction Word Size 14 bits
Encapsulamento 8-DFN-S (6 × 5 mm)
Tipo de montagem Surface mount
Contagem de pinos 8 pins
Power-Saving Technology nanoWatt Technology

Guia de Configuração de Pinos do PIC12F683-E/MF 8-dfn-s (6 × 5 mm)

Configuração de pinos para PIC12F683-E/MF (pacote 8-dfn-s (6 × 5 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 8-dfn-s (6 × 5 mm) para PIC12F683-E/MF

Nenhum dado detalhado de pinagem disponível para PIC12F683-E/MF.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PIC12F683-E/MF é adequado para 6 aplicaçãos: Compact Industrial Sensor Interface, Battery-Powered Environmental Monitor, Appliance Control Module, Building Automation Endpoint, LED Status and Lighting Controller, Compact Measurement and Control Board.

🏭

Compact Industrial Sensor Interface

The PIC12F683-E/MF fits compact industrial sensor interfaces because it combines a four-channel 10-bit ADC with six I/O pins in an 8-DFN-S package measuring 6 × 5 mm. The 2.0 V to 5.5 V operating range supports low-voltage sensor subsystems, while 128 bytes of RAM provides working space for sampled values and control state. Its 256-byte EEPROM can retain calibration constants or configuration parameters between power cycles. Place the ADC inputs away from switching-power traces, use a quiet ground reference, and validate the acquisition timing against the four-channel multiplexer configuration before treating the sensor readings as production-accurate.

🧩

Battery-Powered Environmental Monitor

The PIC12F683-E/MF is appropriate for battery-powered environmental monitors where low pin count, EEPROM retention, and mixed-signal measurement are valuable. It samples up to four analog channels with a 10-bit ADC, operates from 2.0 V to 5.5 V, and provides 128 bytes of RAM for measurement state. The 256-byte EEPROM can store calibration offsets or interval counters without continuous power consumption from volatile memory. Because the implemented code space is 2K × 14 words, firmware must remain compact, and sleep-mode behavior should be tested with the actual sensor and radio load to determine the attainable battery interval.

🔧

Appliance Control Module

The PIC12F683-E/MF can serve as the control hub in a compact appliance module by combining flash-based firmware, six I/O pins, and on-board EEPROM in a small 8-DFN-S outline. The microcontroller can supervise relays, indicators, buttons, and analog feedback while retaining operating counters or service configuration in EEPROM. Its 20 MHz maximum clock provides timing headroom for typical control loops, and the 2.0 V to 5.5 V range accommodates multiple low-voltage supply schemes. For mains-connected appliances, isolate the low-voltage control domain from hazardous energy and validate every protection barrier independently of the microcontroller selection.

🏠

Building Automation Endpoint

The PIC12F683-E/MF is suitable for a low-cost building-automation endpoint that reads environmental inputs and controls discrete outputs. Six I/O pins can handle switches, alarm signals, relay drive, or status LEDs, while the four-channel 10-bit ADC can monitor temperature, light, or occupancy-sensor analog outputs. Flash permits firmware updates, and EEPROM supports persistent configuration such as thresholds, calibration factors, or endpoint identity. The main engineering constraints are the 2K × 14-word implemented program space and the small package footprint, so prioritize peripheral features according to actual firmware demand and maintain adequate copper and thermal-pad support during assembly.

💡

LED Status and Lighting Controller

The PIC12F683-E/MF can control LED status indicators or simple lighting functions where a compact controller and limited I/O are sufficient. Its six I/O pins can drive indicator logic or external transistor stages, and flash memory allows firmware-defined blink patterns and timing behavior. The 20 MHz clock capability provides ample timing margin for multiplexing, fault indication, and basic dim-control algorithms based on software timers. Use appropriate transistor drive and current limiting rather than exceeding GPIO limits directly. If the LED driver introduces high di/dt transitions, keep those return currents away from the ADC reference and sensitive sensor paths to prevent coupling into measured signals.

📟

Compact Measurement and Control Board

The PIC12F683-E/MF supports compact measurement-and-control boards that must combine analog input measurement, local logic, and nonvolatile configuration in a limited board area. Its four-channel 10-bit ADC, 128 bytes of RAM, 256-byte EEPROM, and six I/O pins provide a compact mixed-signal control platform. The 2.0 V minimum operating voltage supports reduced-energy designs, while the 3.5 KB flash capacity accommodates moderate control firmware. Validate the ADC reference, input filtering, and settling time on the assembled PCB, and leave programming access for firmware updates and calibration without consuming scarce I/O pins unnecessarily.

What are the key specifications of PIC12F683-E/MF that engineers should know?
The PIC12F683-E/MF is an 8-bit flash microcontroller rated up to 20 MHz with 3.5 KB of program memory, 128 bytes of RAM, 256 bytes of EEPROM, six I/O pins, and a four-channel 10-bit ADC. It operates from 2.0 V to 5.5 V in an 8-DFN-S 6 × 5 mm package. According to the Microchip PIC12F683 datasheet 41211B, the physically implemented code space is 2K × 14 words.
What is the operating voltage of PIC12F683-E/MF?
The PIC12F683-E/MF operates from 2.0 V to 5.5 V. According to the Microchip PIC12F683 product page and datasheet 41211B, this range supports low-voltage embedded designs and allows the device to operate in common 3.3 V and 5 V systems when the clock, ADC, and I/O levels are configured for the selected supply.
How much memory and I/O does PIC12F683-E/MF provide?
The PIC12F683-E/MF provides 3.5 KB of flash program memory organized as 2K × 14 words, 128 bytes of RAM, and 256 bytes of EEPROM. It also provides six general-purpose I/O pins. According to the Microchip PIC12F683 datasheet 41211B, the family has an 8K × 14 program-counter address space, although only 2K × 14 words are implemented on this device.
Where can I download the PIC12F683-E/MF datasheet PDF?
The official PIC12F683 datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/41211B.pdf. It contains the device pin descriptions, electrical characteristics, ADC information, memory organization, and package drawings for the 8-pin PIC12F683 family. Use the pin-description and electrical-characteristic tables when assigning board connections.
Where can I find the PIC12F683 pinout?
The PIC12F683 pinout is documented in the pin-description table and package drawing in Microchip datasheet 41211B. The PIC12F683-E/MF uses an 8-DFN-S package with six I/O capabilities, while power, ground, programming, and analog functions occupy the remaining pins. Use that table for exact net assignments because the DFN outline must not be inferred from a generic 8-pin DIP diagram.
What can replace the PIC12F683-E/MF on the same board footprint?
The closest identified same-footprint replacement is the Microchip PIC12F683-I/MF, which retains the 8-DFN-S 6 × 5 mm outline and the PIC12F683 memory and peripheral architecture while changing the temperature-grade ordering option. Confirm the required ambient-temperature range, programming configuration, errata status, and exposed-pad layout in the manufacturer documentation before replacing the target device.
What is the best Microchip equivalent for PIC12F683-E/MF?
The best identified Microchip-family equivalent is the PIC12F683-I/MF because it preserves the 8-DFN-S 6 × 5 mm package and belongs to the same PIC12F683 device family. The key selection criterion is the temperature grade: the E/MF and I/MF ordering options are not automatically interchangeable for every environmental requirement. Verify the electrical limits and operating-temperature needs before approving the substitution.
When should I choose PIC12F683-E/MF over another PIC12F683 ordering option?
Choose PIC12F683-E/MF when the design requires the 8-DFN-S 6 × 5 mm footprint, the 2.0 V to 5.5 V supply range, 20 MHz maximum speed, 3.5 KB flash, 128-byte RAM, and six I/O pins in that specific ordering configuration. Select another ordering option only after confirming its package dimensions, temperature grade, pin functions, and programming configuration match the finished design.
Is PIC12F683-E/MF suitable for compact sensor-interface applications?
Yes, the PIC12F683-E/MF is suitable for compact sensor interfaces because it combines six I/O pins with a four-channel 10-bit ADC in an 8-DFN-S package. It can sample multiple analog inputs and retain configuration or calibration data in its 256-byte EEPROM. The design must still validate signal levels, acquisition timing, noise performance, and grounding for the particular sensor.
How do I program a PIC12F683-E/MF?
The PIC12F683-E/MF is programmed through its dedicated programming interface using a Microchip-supported programming tool compatible with the PIC12 family. Its 3.5 KB flash program memory is physically organized as 2K × 14 instruction words, while configuration information is stored separately in device configuration memory. Follow the programming and programming-interface sections of datasheet 41211B when defining connector wiring and programming voltage.
PIC12F683-E/MF projects: what types of products can it control?
PIC12F683-E/MF projects commonly include compact appliance controls, environmental sensors, building-automation endpoints, LED drivers with simple control logic, and small battery-operated instruments. Its six I/O pins, four-channel 10-bit ADC, 128-byte RAM, and EEPROM make it useful for acquisition and supervisory control, but the 2K × 14-word code space should be checked against the final firmware size.
Where can I buy PIC12F683-E/MF and check current availability?
Use the Request a Quote form on this page to request the exact PIC12F683-E/MF MPN, current availability, and lead time. Quote the manufacturer part number exactly and specify the required package and production quantity. The product is listed by Microchip as an 8-bit, 20 MHz, 3.5 KB-flash device in an 8-DFN-S 6 × 5 mm package.
What is the price of PIC12F683-E/MF?
The current unit price for PIC12F683-E/MF is shown through the Request a Quote form on this page. Submit the exact MPN and required quantity for an order-specific response. The device has 3.5 KB of flash program memory, 128 bytes of RAM, six I/O pins, and a 2.0 V to 5.5 V operating range, which can be included in the request for an accurate configuration.
What is the lead time for PIC12F683-E/MF?
Request the current lead time for PIC12F683-E/MF through the Request a Quote form on this page. Include the annual and prototype quantities, manufacturing location, and target schedule so the supply response can reflect the actual build plan. The request should use the complete suffix -E/MF to avoid ambiguity with other PIC12F683 package and ordering options.
Is PIC12F683-E/MF in stock?
Current inventory status for PIC12F683-E/MF is handled through the Request a Quote form on this page. Submit the exact MPN and required quantity for a supply response. The part is identified as an 8-DFN-S 6 × 5 mm device with 3.5 KB flash, 128-byte RAM, six I/O pins, and a four-channel 10-bit ADC.

Dados de referência de engenharia para PIC12F683-E/MF — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PIC12F683-E/MF when the finished product needs the exact 8-DFN-S 6 × 5 mm package, a 2.0 V to 5.5 V operating range, six I/O pins, and a compact mixed-signal control core capable of running at 20 MHz. Its 3.5 KB flash and 128-byte RAM are adequate for focused acquisition, supervisory control, EEPROM-backed configuration, and indicator or actuator management. PIC12F683-I/MF is the closest same-package family alternative when its temperature-grade ordering option satisfies the environmental requirement; because the core, memory, ADC, and pin count remain the same, it can simplify supply planning. Do not substitute SOIC, 4 × 4 mm DFN, or through-hole PIC12F683 options without a PCB change. Before finalizing either device, confirm the exact temperature limits, programming interface, configuration requirements, exposed-pad layout, errata status, and final firmware footprint.

Comparação com alternativas

Parâmetro Este produto PIC12F683-I/MF
Package 8-DFN-S (6 × 5 mm) 8-DFN-S (6 × 5 mm) - same footprint
Brand Microchip Technology Microchip Technology
CPU Architecture 8-bit PIC 8-bit PIC
Maximum CPU Frequency 20 MHz 20 MHz
Program Memory 3.5 KB (2K × 14 words) 3.5 KB (2K × 14 words)
RAM 128 bytes 128 bytes
EEPROM Data Memory 256 bytes 256 bytes
General-Purpose I/O 6 pins 6 pins
Operating Voltage Range 2.0 V to 5.5 V 2.0 V to 5.5 V
ADC 4-channel, 10-bit 4-channel, 10-bit
Temperature-Grade Ordering Option -E/MF -I/MF; exact temperature limits require confirmation

Principais diferenciais

  • Combines mixed-signal control with a compact 8-DFN-S footprint (vs PIC12F683-I/MF)
  • Supports low-voltage operation without an external regulator requirement stated for the device (vs PIC12F683-I/MF)
  • Provides persistent parameter storage in a small pin-count package (vs PIC12F683-I/MF)

Notas de projeto

Reserve the exposed-pad and copper area required by the 8-DFN-S assembly guidance in Microchip datasheet 41211B. Place the device-side supply capacitor adjacent to VDD and GND, route analog inputs away from switching nodes, and keep programming-interface access available for manufacturing. Validate the land pattern and exposed-pad connection against the package drawing rather than a generic DFN footprint.

Design the supply rail for the full 2.0 V to 5.5 V operating range while accounting for GPIO injection limits, ADC reference accuracy, and peripheral current at 20 MHz. Place bulk and high-frequency bypass capacitance according to the manufacturer layout recommendations. If the source rail can overshoot or fall outside the permitted range, add suitable protection rather than relying on software to detect an invalid supply condition.

Do not treat the nominal 8K × 14 program-memory address space as implemented flash. The PIC12F683-E/MF physically implements only 2K × 14 words, so compile the final firmware with the correct device definition and verify its size before programming. Also use the package-specific pin table rather than a generic 8-pin diagram, and confirm the configuration words required by the intended clock, watchdog, and brownout behavior.

For analog measurements, keep sensor traces short and connect the ADC return to the appropriate quiet ground reference. Place input filtering close to the MCU pins and assess the source impedance against the ADC acquisition requirements. A four-channel 10-bit ADC does not eliminate noise or settling-time concerns; the measured accuracy depends on reference stability, layout, sampling time, and the external sensor interface.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ordering code.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

pic12f683 pinout pic12f683 projects pic12f683 datasheet pic12f683 price pic12f683 programming pic12f683 datasheet pdf pic12f683 pdf PIC12F683-E/MF datasheet PIC12F683-E/MF pinout PIC12F683-E/MF equivalent PIC12F683-E/MF replacement PIC12F683-E/MF vs PIC12F683-I/MF Microchip PIC12F683-E/MF PIC12F683 20MHz 8-pin MCU

Componentes & termos relacionados

Microchip Technology PIC12F683-E/MF PIC12F683 PIC12F683-I/MF PIC12F683T-E/MF PIC12F683-I/SN PIC12F683-E/P PIC12F615-I/P PIC12F635-I/P 8-bit microcontroller PIC12 low-pin-count family enhanced mid-range PIC architecture RISC core flash program memory EEPROM 10-bit ADC nanoWatt Technology 20 MHz 2.0 V to 5.5 V 8-DFN-S QFN family surface-mount package industrial sensor interface building automation battery-powered embedded control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ