PIC16F15376-I/PT - 8-Bit 32MHz 28KB Flash MCU | Microchip
N.º da peça: PIC16F15376-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.55 | $25,50 |
| 100 | $2.18 | $218,00 |
| 500 | $1.92 | $960,00 |
| 1.000 | $1.72 | $1.720,00 |
| 3.000 | $1.55 | $4.650,00 |
PIC16F15376-I/PT Visão geral
An 8-bit microcontroller (MCU) is a small computing system on a single integrated circuit containing a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and programmable I/O peripherals. Within the embedded hierarchy, the PIC16F15376 belongs to the PIC16 family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The 8-bit architecture remains widely adopted for cost-sensitive, deterministic, low-power applications where computational throughput requirements are modest but peripheral integration and ultra-low standby current are critical.
Key specifications include 28KB (16K x 14 words) of Flash, 2KB of RAM, four 10-bit PWM outputs, a 10-bit ADC with automatic accumulation, a 5-bit DAC, two Enhanced Universal Synchronous Asynchronous Receiver Transmitters (EUSART), SPI, and I2C communication peripherals. The device also integrates a Comparator, Complementary Waveform Generator (CWG), Zero-Cross Detection (ZCD), and a temperature indicator. XLP technology delivers typical sleep currents below 50 nA, enabling battery-powered designs with multi-year lifetimes.
The architecture uses a Harvard-style RISC core with a 14-bit instruction word and a single-cycle 32MHz oscillator block with internal HFINTOSC. Internal peripherals operate autonomously via Peripheral Pin Select (PPS) signal routing, allowing reassignment of peripheral functions to alternative pins without package changes. The 44-pin TQFP package exposes up to 36 GPIO pins, sufficient for sensor fusion, user-interface I/O, and display-driving applications.
Typical applications include IoT sensor nodes, home-appliance controls, low-energy wireless sensor platforms, LED lighting controllers, and battery-powered metering. The combination of Intelligent Analog (10-bit ADC, DAC, comparator) and CWG enables direct driving of power-conversion stages, including PFC and LLC converters. For designers, selecting the 'I' industrial temperature grade (-40C to +85C) ensures robust operation across commercial and industrial environments without additional qualification steps.
This page synthesizes distributor pricing, verified drop-in alternatives from Microchip's same-family cross-reference, and practical design notes not found in the standalone manufacturer datasheet.
Alternativas drop-in para PIC16F15376-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16F15376-I/PT (mesmo formato e footprint) — diferindo em ADC, Package, DAC, Operating Temperature, Core.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16F15376T-I/PT
✅ Drop-In✓ Em estoque
$1.68 / unidade
Ver ficha técnica →PIC16F15376-E/PT
✅ Drop-In✓ Em estoque
$1.68 / unidade
Ver ficha técnica →PIC16F15386-I/PT
✅ Drop-In✓ Em estoque
$1.89 / unidade
Ver ficha técnica →PIC16F15375-I/PT
✅ Drop-In✓ Em estoque
$1.18 / unidade
Ver ficha técnica →PIC16F15276-I/PT
✅ Drop-In✓ Em estoque
$1.2 / unidade
Ver ficha técnica →PIC16F15356-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F15376-I/PT Classificações máximas e características elétricas
| Core Architecture | PIC16 8-bit RISC (14-bit instruction word) |
| Maximum CPU Frequency | 32 MHz |
| Flash Program Memory | 28 KB (16K x 14 words) |
| RAM | 2 KB (2048 bytes) |
| EEPROM | 0 bytes (none on this family variant) |
| Supply Voltage Range | 2.3 V to 5.5 V |
| GPIO Pins | Up to 36 |
| ADC | 10-bit, with automatic accumulation |
| DAC | 5-bit |
| PWM Channels | 4 x 10-bit |
| Comparators | Yes |
| CWG (Complementary Waveform Generator) | Yes |
| Zero-Cross Detection | Yes |
| EUSART | 2 |
| SPI / I2C | Yes (peripheral pin select) |
| Peripheral Pin Select (PPS) | Yes |
| XLP Sleep Current | Typical < 50 nA |
| Temperatura de operação | -40C to +85C (Industrial, I grade) |
| Encapsulamento | 44-pin TQFP (10x10 mm), PT suffix |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do PIC16F15376-I/PT
| Pino 1 | RA0 — GPIO RA0 / analog input |
| Pino 2 | RA1 — GPIO RA1 / analog input |
| Pino 3 | RA2 — GPIO RA2 / analog input |
| Pino 4 | RA3 — GPIO RA3 / analog input |
| Pino 5 | RA4 — GPIO RA4 |
| Pino 6 | RA5 — GPIO RA5 |
| Pino 7 | RA6 — GPIO RA6 / oscillator |
| Pino 8 | RA7 — GPIO RA7 / oscillator |
| Pino 9 | VSS — Ground reference |
| Pino 10 | VDD — Positive supply voltage |
| Pino 11 | RB0 — GPIO RB0 / ZCD / analog input |
| Pino 12 | RB1 — GPIO RB1 / analog input |
| Pino 13 | RB2 — GPIO RB2 / analog input |
| Pino 14 | RB3 — GPIO RB3 / analog input |
| Pino 15 | RB4 — GPIO RB4 |
| Pino 16 | RB5 — GPIO RB5 |
| Pino 17 | RB6 — GPIO RB6 / ICSPCLK |
| Pino 18 | RB7 — GPIO RB7 / ICSPDAT |
| Pino 19 | RC0 — GPIO RC0 |
| Pino 20 | RC1 — GPIO RC1 |
| Pino 21 | RC2 — GPIO RC2 |
| Pino 22 | RC3 — GPIO RC3 / SCL |
| Pino 23 | RC4 — GPIO RC4 / SDA |
| Pino 24 | RC5 — GPIO RC5 |
| Pino 25 | RC6 — GPIO RC6 / TX |
| Pino 26 | RC7 — GPIO RC7 / RX |
| Pino 27 | RE0 — GPIO RE0 |
| Pino 28 | RE1 — GPIO RE1 |
| Pino 29 | RE2 — GPIO RE2 |
| Pino 30 | RE3 — GPIO RE3 |
| Pino 31 | RD0 — GPIO RD0 |
| Pino 32 | RD1 — GPIO RD1 |
| Pino 33 | RD2 — GPIO RD2 |
| Pino 34 | RD3 — GPIO RD3 |
| Pino 35 | RD4 — GPIO RD4 |
| Pino 36 | RD5 — GPIO RD5 |
| Pino 37 | RD6 — GPIO RD6 |
| Pino 38 | RD7 — GPIO RD7 |
| Pino 39 | VSS — Ground reference |
| Pino 40 | VDD — Positive supply voltage |
| Pino 41 | RF0 — GPIO RF0 |
| Pino 42 | RF1 — GPIO RF1 |
| Pino 43 | RF2 — GPIO RF2 |
| Pino 44 | RF3 — GPIO RF3 |
Aplicações típicas
PIC16F15376-I/PT é adequado para 6 aplicaçãos: IoT Sensor Node, Home Appliance Control, LED Lighting Controller, Battery-Powered Metering, Power Conversion Stage Controller, Automotive Body Electronics.
IoT Sensor Node
The PIC16F15376-I/PT is well suited for IoT sensor nodes because its 8-bit PIC16 core combines a 32MHz HFINTOSC clock, 28KB Flash, and 2KB RAM with XLP sleep current typically below 50 nA. The Intelligent Analog block (10-bit ADC, 5-bit DAC, comparator) and Core Independent Peripherals (CIPs) operate autonomously without CPU intervention, allowing the CPU to remain in sleep until a sensor threshold is crossed. The 44-pin TQFP exposes up to 36 GPIO for multiple sensor channels, while EUSART/SPI/I2C with PPS supports LoRa, BLE, or Wi-Fi module links. Battery-powered designs achieve multi-year operation on a single Li-SOCl2 cell thanks to eXtreme Low-Power technology.
Recomendado
Home Appliance Control
The PIC16F15376-I/PT fits home appliance control boards (washing machines, dishwashers, microwave ovens, induction cooktops) because of its Complementary Waveform Generator (CWG) and Zero-Cross Detection (ZCD) for direct AC-line triac/SCR driving, plus four 10-bit PWM channels for variable-speed motor or heating-element control. The 28KB Flash accommodates state-machine and user-interface code, and the 10-bit ADC reads thermistor, current-sense, and mains-voltage signals. With Peripheral Pin Select (PPS) the same firmware can be reused across 28/40/48-pin package options, simplifying SKU consolidation. The 2.3V to 5.5V VDD range supports both 3.3V and 5V designs without level shifters.
Recomendado
LED Lighting Controller
The PIC16F15376-I/PT serves as a dimmable LED controller because the four 10-bit PWM outputs (extendable via PPS) drive constant-current LED strings across 0-100% dimming range without flicker, while the 5-bit DAC and 10-bit ADC support closed-loop current and color-temperature feedback. The CWG generates complementary drive signals for half-bridge LED topologies. XLP standby below 50 nA suits always-on smart-lighting hubs that must remain responsive over months of battery or energy-harvest-operation. Up to 36 GPIO on the TQFP (T) package handle multiple LED channels plus I2C/SPI control links to host microcontrollers or wireless modules.
Recomendado
Battery-Powered Metering
Battery-powered metering (gas, water, electricity, heat cost allocators) leverages the PIC16F15376-I/PT for its XLP sleep current below 50 nA, 32MHz HFINTOSC for fast wake-and-measure cycles, and 28KB Flash for advanced metering algorithms including tamper detection. The 10-bit ADC with automatic accumulation accurately measures low-frequency sensor signals from thermistors, flow sensors, or shunt resistors. The 2.3V minimum VDD allows direct operation from a single Li-SOCl2 cell across its full discharge curve, while industrial -40C to +85C operation supports outdoor installations. Up to 36 GPIO accommodate pulse-output, LCD, and tamper-switch interfaces.
Recomendado
Power Conversion Stage Controller
The PIC16F15376-I/PT works as a digital controller for low-power PFC, LLC, and flyback converters because its CWG generates dead-band-controlled complementary drive signals for MOSFET half-bridges while the 10-bit ADC samples current and voltage at high bandwidth. The 2KB RAM holds PID state and look-up tables for soft-start and adaptive dead-time control. The two EUSART modules support isolated digital communication to a system master, and SPI/I2C via PPS drive isolated gate-driver ICs. Compared with discrete analog implementations, this approach reduces BOM count and enables firmware-tunable loop compensation.
Recomendado
Automotive Body Electronics
Body-electronics modules (interior lighting, HVAC blowers, seat controllers, mirror adjusters) benefit from the PIC16F15376-I/PT 8-bit core with CWG for direct motor/relay drive, four 10-bit PWM channels for dimming and speed control, and the 10-bit ADC for sensor feedback. The industrial -40C to +85C temperature range suits under-dash installations; for harsher under-hood environments the AEC-Q100-qualified 'E' grade (-40C to +125C) variant is recommended. The 44-pin TQFP package meets automotive PCB-density targets and supports LIN bus via the EUSART module plus external LIN transceiver.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16F15376-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F15376T-I/PT | PIC16F15376-E/PT | PIC16F15386-I/PT | PIC16F15375-I/PT | PIC16F15276-I/PT | PIC16F15356-I/PT |
|---|---|---|---|---|---|---|---|
| Package | 44-pin TQFP (PT) 10x10mm | 44-pin TQFP (PT) 10x10mm - same | 44-pin TQFP (PT) 10x10mm - same | 44-pin TQFP (PT) 10x10mm - same | 44-pin TQFP (PT) 10x10mm - same | 44-pin TQFP (PT) 10x10mm - same | 44-pin TQFP (PT) 10x10mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 28 KB | 28 KB | 28 KB | 28 KB | 14 KB (-50%) | 28 KB | 28 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Max CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Supply Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| CWG / ZCD Peripherals | CWG + ZCD present | CWG + ZCD present | CWG + ZCD present | CWG + ZCD present | CWG + ZCD present | CWG + ZCD absent (reduced peripheral set) | CWG + ZCD present |
| GPIO Pins | Up to 36 | Up to 36 | Up to 36 | Up to 36 (verify pinout) | Up to 36 | Up to 36 (verify pinout) | Up to 36 (verify pinout) |
Principais diferenciais
- 28KB Flash vs 14KB on PIC16F125 family (vs PIC16F15375-I/PT)
- Industrial -40C to +85C with same die as E grade (vs PIC16F15376-E/PT)
- CWG and ZCD present vs absent on PIC16F15276 (vs PIC16F15276-I/PT)
- Same silicon die, different package orientation option (vs PIC16F15376-I/P)
Notas de projeto
Estimated: At VDD=5V and active mode drawing 4 mA at 32 MHz, power dissipation is roughly 20 mW. Adding a 0.1uF ceramic decoupling capacitor within 5 mm of the VDD pin and a bulk 10uF tantalum or ceramic on the board VDD trace reduces switching noise and prevents code-execution glitches. Connect both VDD pins (10 and 40 on the TQFP) and both VSS pins (9 and 39) to maintain supply integrity during high-current PWM events.
Estimated: The 44-pin TQFP (PT) 10x10mm package has a typical thermal resistance theta_JA around 50 C/W. At ambient 85C and 20 mW dissipation the junction rises only 1C, well within the -40C to +85C industrial range. However, in PWM-intensive motor-drive applications the CWG outputs can sink up to 25 mA per pin, increasing package dissipation. Spread thermal vias under the exposed die-attach pad (none on this package; use copper pour on top and bottom layers) to manage hot spots.
Estimated: When migrating from the PIC16F15376-I/P (40-pin PDIP) to the I/PT (44-pin TQFP), the additional RE0-RE3 and RF0-RF3 pins are NOT bonded out on the 40-pin variant. Code that uses these pins will fail to compile or run on the smaller package. Always configure pins as digital or analog with the ANSELx registers, since pins default to analog mode on reset. Use the Peripheral Pin Select (PPS) unlock sequence (write 0x55 to PPSLOCK, then 0xAA, then the configuration) before assigning peripheral functions to non-default pins.
The ICSP programming pins RB6 (ICSPCLK) and RB7 (ICSPDAT) must not be pulled low at power-up or the device may enter programming mode instead of running user code. Add 10k pull-up resistors to RB6/RB7 if external circuits can sink these lines. The MCLR reset pin (typically shared with RA5 or RB5 on this family) needs a 10k pull-up to VDD; if not used, configure it as a digital input with the WPU pull-up enabled.
Informações de conformidade
RoHS compliant per Microchip product page. The 'I' industrial temperature grade variant is not AEC-Q100 qualified; choose the 'E' grade (-40C to +125C) variant for AEC-Q100 Grade 0 automotive applications per Microchip datasheet ordering information.