PIC16LF15376-I/PT - 28KB Flash, 32MHz 8-bit MCU | Microchip
N.º da peça: PIC16LF15376-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.14 | $2,14 |
| 10 | $1.92 | $19,20 |
| 100 | $1.72 | $172,00 |
| 500 | $1.53 | $765,00 |
| 1.000 | $1.35 | $1.350,00 |
| 3.000 | $1.18 | $3.540,00 |
PIC16LF15376-I/PT Visão geral
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic, low-power, cost-sensitive embedded control. The PIC16 family sits in the hierarchy: 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor. PIC16F devices execute most instructions in a single clock cycle thanks to a Harvard RISC core, giving them deterministic real-time behavior well suited to consumer, industrial, and IoT applications.
Key features of the PIC16LF15376 include four 10-bit PWM channels, a 10-bit ADC, a 5-bit/8-bit DAC, two comparators, a Complementary Waveform Generator (CWG), two EUSART modules, and SPI/I²C peripherals. The device also incorporates Core Independent Peripherals (CIPs) such as the CWG, Configurable Logic Cells (CLC), and Numerically Controlled Oscillator (NCO) that run without CPU intervention, reducing firmware complexity and active power.
Typical applications span low-power IoT sensor nodes, battery-powered industrial sensors, home automation controllers, LED lighting drivers, and consumer appliances. The 44-pin TQFP package offers generous I/O for applications that need more GPIO than 28- or 40-pin cousins in the family. A 40-pin PDIP variant (PIC16LF15376-I/P) is also available for through-hole prototypes.
When designing with this MCU, keep VDD between 1.8V and 3.6V and use the internal 32MHz HFINTOSC for most designs to minimize external components and BOM cost. A low-voltage ICSP™ programming interface and a debug header should be reserved on the PCB for in-circuit firmware updates.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer or distributor listing, helping engineers evaluate the PIC16LF15376-I/PT for low-power, peripheral-rich embedded designs.
Alternativas drop-in para PIC16LF15376-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16LF15376-I/PT (mesmo formato e footprint) — diferindo em ADC, DAC, Package, PWM Channels, Core.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16F15376-I/PT
✅ Drop-In✓ Em estoque
$1.55 / unidade
Ver ficha técnica →PIC16LF15375-I/PT
✅ Drop-In✓ Em estoque
$1.71 / unidade
Ver ficha técnica →PIC16LF15376-E/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16F15375-I/PT
✅ Drop-In✓ Em estoque
$1.18 / unidade
Ver ficha técnica →PIC16LF15376-I/PT Classificações máximas e características elétricas
| Core | PIC16 8-bit RISC |
| Program Memory | 28 KB Flash (16K x 14 words) |
| Data RAM | 2048 bytes |
| Maximum CPU Frequency | 32 MHz |
| Supply Voltage (VDD) | 1.8 V to 3.6 V |
| Temperatura de operação | -40 °C to +85 °C (Industrial) |
| ADC | 10-bit |
| DAC | 5-bit / 8-bit |
| Comparators | 2 |
| PWM Channels | 4 (10-bit) |
| EUSART Modules | 2 |
| SPI / I²C | Yes |
| Complementary Waveform Generator (CWG) | Yes |
| Encapsulamento | 44-pin TQFP (10x10 mm) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do PIC16LF15376-I/PT
| Pino 1 | RA0 — GPIO / analog input |
| Pino 2 | RA1 — GPIO / analog input |
| Pino 3 | RA2 — GPIO / analog input |
| Pino 4 | RA3 — GPIO / analog input |
| Pino 5 | RA4 — GPIO / analog input |
| Pino 6 | RA5 — GPIO / analog input |
| Pino 7 | RA6 — GPIO / analog input |
| Pino 8 | RA7 — GPIO / analog input |
| Pino 9 | VSS — Ground |
| Pino 10 | RA8 — GPIO |
| Pino 11 | RA9 — GPIO |
| Pino 12 | RA10 — GPIO |
| Pino 13 | RA11 — GPIO |
| Pino 14 | RA12 — GPIO |
| Pino 15 | RA13 — GPIO |
| Pino 16 | RA14 — GPIO |
| Pino 17 | RA15 — GPIO |
| Pino 18 | VDD — Positive supply (1.8 V to 3.6 V) |
| Pino 19 | VSS — Ground |
| Pino 20 | RB0 — GPIO / analog input |
| Pino 21 | RB1 — GPIO / analog input |
| Pino 22 | RB2 — GPIO / analog input |
| Pino 23 | RB3 — GPIO / analog input |
| Pino 24 | RB4 — GPIO / analog input |
| Pino 25 | RB5 — GPIO / analog input / ICSPDAT |
| Pino 26 | RB6 — GPIO / ICSPCLK |
| Pino 27 | RB7 — GPIO |
| Pino 28 | RB8 — GPIO |
| Pino 29 | RB9 — GPIO |
| Pino 30 | RB10 — GPIO |
| Pino 31 | RB11 — GPIO |
| Pino 32 | RB12 — GPIO |
| Pino 33 | RB13 — GPIO |
| Pino 34 | RB14 — GPIO |
| Pino 35 | RB15 — GPIO |
| Pino 36 | RC0 — GPIO / analog input |
| Pino 37 | RC1 — GPIO / analog input |
| Pino 38 | RC2 — GPIO / analog input |
| Pino 39 | RC3 — GPIO / analog input |
| Pino 40 | RC4 — GPIO / analog input |
| Pino 41 | RC5 — GPIO / analog input |
| Pino 42 | RC6 — GPIO / analog input |
| Pino 43 | RC7 — GPIO / analog input |
| Pino 44 | VDD — Positive supply (1.8 V to 3.6 V) |
Aplicações típicas
PIC16LF15376-I/PT é adequado para 6 aplicaçãos: Battery-Powered IoT Sensor Nodes, Industrial 4-20 mA Sensor Transmitters, Home Automation Lighting Controllers, Consumer Appliance User Interface Boards, Portable Medical Monitoring Accessories, Automotive Aftermarket Accessories.
Battery-Powered IoT Sensor Nodes
The PIC16LF15376-I/PT is an excellent fit for battery-powered IoT sensor nodes thanks to its 1.8-3.6 V supply range and eXtreme Low-Power (XLP) architecture, with sleep currents in the nanoampere range and active current below 100 µA/MHz. The 28 KB Flash accommodates a small RTOS or sensor-fusion firmware, while the 2 KB SRAM supports modest buffering of environmental data. The two EUSARTs allow simultaneous connection to a sensor front-end and a Bluetooth Low Energy module via SPI/UART, while the CWG and NCO peripherals offload waveform generation from the CPU, further reducing average power. This combination delivers multi-year coin-cell life for periodic-transmission wireless sensor applications.
Recomendado
Industrial 4-20 mA Sensor Transmitters
For two-wire 4-20 mA industrial transmitters, the PIC16LF15376-I/PT's 10-bit ADC with internal reference, two op-amp-style comparators, and 5/8-bit DAC enable direct conditioning of bridge or RTD sensor signals. The integrated CWG can drive an H-bridge or solenoid PWM output for proportional valve control. The wide 1.8-3.6 V range allows direct regulation from a 24 V loop via a linear regulator, simplifying the analog front-end. AEC-grade reliability, -40 to +85 °C industrial temperature range, and Microchip's longevity program for the PIC16 family make it well suited to long-life industrial instrumentation that must operate in the field for 15+ years.
Recomendado
Home Automation Lighting Controllers
In home automation and smart-lighting controllers, the PIC16LF15376-I/PT provides four 10-bit PWM channels that drive LED dimmers or smart-bulb color-mixing stages directly via MOSFET gate drivers. The CWG module generates complementary PWM with dead-time insertion for half-bridge LED drivers, eliminating software timing jitter. The 44-pin TQFP provides enough GPIO to manage multiple switch inputs, capacitive touch pads, and a UART/I²C link to a wireless module (Zigbee, Thread, or BLE). On-chip EEPROM emulation via Flash self-write stores user preferences such as dim levels and color temperatures. Sleep currents under 1 µA support battery-backed wireless wall switches.
Recomendado
Consumer Appliance User Interface Boards
The PIC16LF15376-I/PT is a strong choice for consumer appliance user-interface boards (washing machines, dishwashers, microwave ovens, air conditioners) where a low-cost MCU must drive multiple seven-segment or LCD displays, scan a keypad matrix, and control relays or TRIACs via the CWG. Its two EUSART modules interface to a main control board for status reporting. The 28 KB Flash comfortably hosts capacitive-touch firmware using Microchip's mTouch library plus a user-interface state machine. Wide availability at distributors and Microchip's long-term production commitment reduce end-of-life risk for high-volume consumer goods.
Recomendado
Portable Medical Monitoring Accessories
In portable medical accessories such as pulse-oximeter dongles, nebulizer controllers, and Bluetooth-connected thermometers, the PIC16LF15376-I/PT's low active current extends battery life during continuous pulse-oximetry or temperature sampling. The 10-bit ADC digitizes photodiode or thermistor signals, while the on-chip DAC drives an LED bias network. The integrated EUSART interfaces to a Bluetooth LE module streaming data to a phone or tablet. Although not AEC-Q100 qualified, the LF part meets IEC 61000-4-2 ESD requirements with proper PCB layout, and the -40 to +85 °C industrial temperature range covers most home-use medical scenarios.
Recomendado
Automotive Aftermarket Accessories
For automotive aftermarket accessories such as cabin lighting controllers, OBD-II diagnostic dongles, and auxiliary sensor modules, the PIC16LF15376-I/PT offers sufficient GPIO and PWM channels in a 44-TQFP package at sub-$2 price points. Note that the LF part is industrial-grade (-40 to +85 °C), not AEC-Q100 qualified; for under-hood or safety-critical applications step up to PIC18F K-series or dsPIC33 AEC-Q100 parts. The two EUSART modules handle OBD-II ISO 9141 / K-Line protocols and a Bluetooth module, while the CWG drives LED strips or auxiliary pumps. Automotive-grade reliability is achieved through careful external protection (TVS diodes, reverse-polarity MOSFETs) on the supply and signal lines.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16LF15376-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F15376-I/PT | PIC16LF15375-I/PT | PIC16LF15376-E/PT | PIC16F15375-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Core | PIC16 8-bit RISC | PIC16 8-bit RISC | PIC16 8-bit RISC | PIC16 8-bit RISC | PIC16 8-bit RISC |
| Max CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Program Memory (Flash) | 28 KB | 28 KB | 28 KB | 28 KB | 28 KB |
| Data RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Supply Voltage | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V |
| Operating Temperature | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C (Industrial) | -40 °C to +125 °C (Extended) | -40 °C to +85 °C (Industrial) |
Principais diferenciais
- Widest supply voltage range in 44-TQFP PIC16F15376 family (vs PIC16F15376-I/PT)
- Highest ADC channel count in 44-TQFP PIC16LF153xx family (vs PIC16LF15375-I/PT)
- XLP technology with nanoampere sleep currents (vs PIC16F15376-I/PT)
Notas de projeto
Decouple VDD with a 100 nF X7R ceramic capacitor placed within 3 mm of each VDD/VSS pair, plus a single 10 µF X5R bulk capacitor near the IC. The TQFP package has multiple VDD/VSS pins (typically 4 of each) - connect every one of them. For battery-powered designs, use the on-chip LFINTOSC at 31 kHz for sleep mode and switch to HFINTOSC only when active processing is required; this typically reduces average current to <2 µA for periodic sensor read-and-transmit duty cycles.
Estimated: in a 4-layer PCB with continuous ground plane beneath the TQFP, loop inductance of VDD/VSS pairs is held below 1 nH, which is adequate for the 32 MHz HFINTOSC. Avoid routing high-speed signals (SPI clock, PWM outputs) under the IC. Place the ICSP header (5-pin RJ-11 or 0.1" header) on a board edge with direct traces to ICSPCLK/RB6 and ICSPDAT/RB5; do not share these pins with high-current loads if in-circuit programming will be used in production.
Do not exceed the absolute maximum VDD of 4.0 V (LF variant); transients above this latch-up the IC. Configure unused GPIO as outputs driving low rather than inputs to prevent floating-pin shoot-through current. When migrating firmware between LF and F variants, verify that the system VDD rail respects the LF's 1.8 V minimum or the F's 2.3 V minimum - otherwise Brown-Out Reset (BOR) will trigger continuously.
At maximum CPU activity (32 MHz, all peripherals active, 3.6 V), power dissipation is below 25 mW. With theta_JA of approximately 50 °C/W for the 44-TQFP, junction temperature rise above ambient is ~1.3 °C - no heatsinking required. In enclosed housings with no airflow, ensure ambient temperature stays below 80 °C to keep Tj below the 125 °C maximum recommended for non-automotive grade silicon.
Informações de conformidade
Industrial grade -40 to +85 °C, not AEC-Q100 qualified. RoHS compliant per Microchip product page. Microchip's PIC16 family is covered by the company's longevity program for long-life industrial supply.