PIC16F77T-I/ML - 8-Bit 20MHz Flash MCU | Microchip Technology
N.º da peça: PIC16F77T-I/ML ✓ AtivoPIC16F77T-I/ML Visão geral
A PIC microcontroller is a compact embedded-processing device that combines a CPU core, program memory, data memory, digital I/O, timers, and analog peripherals on one integrated circuit. Within the product hierarchy, the PIC16F77 belongs to the PIC16 family of 8-bit RISC microcontrollers and combines a 200ns instruction-cycle target with a compact set of 35 single-word instructions. This structure supports economical control tasks where deterministic peripheral handling and simple embedded firmware are more important than application-processor performance.
The PIC16F77T-I/ML provides 8K program words in Flash, 368 bytes of RAM, and 33 digital I/O pins. Its 20MHz maximum operating frequency gives control loops and serial or timing routines additional headroom compared with slower PIC16 devices. The manufacturer also identifies 8 channels of 8-bit analog-to-digital conversion, plus two additional comparison functions. An external oscillator is specified for this exact device, making clock selection and startup behavior important parts of the hardware design.
The PIC architecture combines a simple instruction set with integrated peripheral functions, allowing control, timing, signal acquisition, and digital interface tasks to share one processor. Because this is a Flash-based member of the PIC16 family, firmware can be programmed and updated without a separate programmable ROM. The manufacturer describes the family as upward compatible with PIC16C5X, PIC12CXXX, and PIC16C7X devices, which helps engineers evaluate migration paths within the established Microchip ecosystem.
Typical applications include industrial controllers, sensor acquisition systems, compact instrumentation, motor and process-control equipment, and embedded products requiring numerous digital I/O channels. The 44-QFN package supports space-constrained boards, while the exposed thermal pad assists heat transfer when the device operates continuously. The broad I/O count allows external sensors, actuators, indicators, and communication peripherals to be connected without an additional large interface IC.
Hardware design should follow the manufacturer pin-assignment and decoupling guidance for the 44-lead package. Pay particular attention to the external oscillator configuration, analog-input conditioning, unused I/O states, and exposed-pad connection. Use the manufacturer pin-description table to assign tracks, and validate programming, clock, reset, and power sequencing on the assembled prototype before production release.
This product page combines the exact device identity with package, memory, interface, and application guidance, plus practical considerations for replacement screening and PCB implementation. It also distinguishes the industrial-grade temperature option from related package or family variants so procurement and engineering teams can make a traceable device-selection decision.
Alternativas drop-in para PIC16F77T-I/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16F77T-I/ML (mesmo formato e footprint) — diferindo em Package, RAM, Timers, ADC, ADC Channels.
PIC16F77-E/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F77-I/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16LF77T-I/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F777T-I/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F707-I/ML
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC16F77T-I/ML Classificações máximas e características elétricas
| Product Type | 8-bit CMOS Flash PIC microcontroller |
| Maximum CPU Frequency | 20MHz |
| Instruction Execution Time | 200ns |
| Instruction Set | 35 single-word instructions |
| Program Memory | 14KB (8K x 14 words) |
| Program Memory Type | Flash |
| RAM | 368 x 8 bits |
| Digital I/O | 33 pins |
| ADC Resolution | 8 bits |
| ADC Channels | 8 channels |
| Additional Comparison Functions | 2 |
| Oscillator Type | External |
| Operating Voltage | 5V |
| Faixa de temperatura de operação | -40°C to +85°C |
| Encapsulamento | 44-QFN (8x8 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| Packaging | Tape and Reel |
Guia de Configuração de Pinos do PIC16F77T-I/ML 44-qfn (8x8 mm) with exposed pad
Configuração de pinos para PIC16F77T-I/ML (pacote 44-qfn (8x8 mm) with exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC16F77T-I/ML.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC16F77T-I/ML é adequado para 6 aplicaçãos: Industrial Sensor Acquisition Controller, Compact Process Control Module, Motor and Actuator Control, Instrumentation and Data Logger, Security and Access Control Panel, Industrial Communication Gateway.
Industrial Sensor Acquisition Controller
The PIC16F77T-I/ML fits compact sensor-acquisition equipment because it combines eight 8-bit ADC channels with 33 digital I/O pins and a 20MHz maximum clock. Engineers can sample analog inputs while using separate I/O for sensors, alarm outputs, status indicators, and actuator controls. Its -40°C to +85°C industrial temperature range suits equipment operating outside consumer-temperature limits. The external oscillator should be selected to meet the required timing accuracy, while the exposed thermal pad should be connected according to the manufacturer PCB guidance.
Recomendado
Compact Process Control Module
The PIC16F77T-I/ML provides enough mixed-signal and control capability for a compact process-control module without requiring a separate analog IC. Its eight ADC channels can monitor pressure, temperature, or level signals, while two comparison functions support fast threshold events. The 33 I/O pins can drive relays, valves, indicators, and digital sensors. At 20MHz, the MCU can divide control tasks between sampling, filtering, and output updates, although the final loop rate depends on the external clock and firmware execution time.
Recomendado
Motor and Actuator Control
The PIC16F77T-I/ML can coordinate timed actuator sequences, limit inputs, and sensor feedback in small motor-control products. Its 20MHz clock provides processing headroom for debouncing, state-machine sequencing, and diagnostic routines, while 33 I/O pins leave room for pulse inputs, direction controls, and status signals. The eight ADC channels can supervise analog feedback such as current or position when the external front end is designed appropriately. Use clean switching layout, protective drive stages, and a suitable thermal strategy for inductive loads.
Recomendado
Instrumentation and Data Logger
The PIC16F77T-I/ML is appropriate for compact instrumentation that must acquire several analog measurements and retain operating state in a small controller. Its 14KB of Flash supports a bootable embedded application, and 368 bytes of RAM accommodates working variables and communication buffers. The eight 8-bit ADC channels serve basic sensor measurements, while 33 I/O pins support front-panel controls, status indicators, and external memory or communications. For long-duration logging, account for the 368-byte RAM limit when defining buffering and data-retention architecture.
Recomendado
Security and Access Control Panel
The PIC16F77T-I/ML can manage key inputs, door sensors, indicators, and alarm outputs in a distributed access-control panel. Its 33 digital I/O lines reduce the need for multiple expander components, and the 20MHz clock supports responsive debouncing and event sequencing. The industrial temperature range covers common indoor industrial environments, while Flash preserves firmware across power cycles. As with any access-control design, validate fail-safe behavior, communication robustness, and the security requirements applicable to the deployed product.
Recomendado
Industrial Communication Gateway
The PIC16F77T-I/ML can serve as a protocol gateway or local controller between sensors and a higher-level communications network. Its 33 I/O pins support discrete status lines and multiple peripheral interfaces, while eight ADC channels permit local analog monitoring without a separate MCU. The 20MHz clock is suitable for moderate protocol handling and deterministic I/O tasks, although the 368 bytes of RAM limits simultaneous buffering. Select an external transceiver for the required physical layer and isolate communication routing from sensitive analog inputs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16F77T-I/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16F77-E/ML | PIC16F77-I/ML | PIC16LF77T-I/ML | PIC16F777T-I/ML | PIC16F707-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-QFN (8x8 mm) with exposed pad | 44-QFN (8x8 mm) with exposed pad | 44-QFN (8x8 mm) with exposed pad | 44-VQFN exposed pad | 44-VQFN exposed pad | 44-VQFN exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Temperature Designation | /I industrial grade | /E grade | /I industrial grade | /I industrial grade | /I industrial grade | /I industrial grade |
Principais diferenciais
- Exact industrial-temperature ordering option with tape-and-reel presentation (vs PIC16F77-I/ML)
- Defined 20MHz control headroom for embedded timing and acquisition (vs PIC16F77-E/ML)
- Eight-channel 8-bit ADC integration reduces external sensing hardware (vs PIC16F707-I/ML)
- 14KB Flash capacity for self-contained firmware (vs PIC16LF77T-I/ML)
Notas de projeto
Use the exact 44-QFN land pattern and exposed-pad geometry from the manufacturer package drawing. Connect the exposed pad to the appropriate ground plane with the prescribed via and copper arrangement rather than treating it as an optional thermal feature. Preserve the package outline and pin-1 orientation on the PCB; a shared nominal pin count does not guarantee that a candidate package is mechanically interchangeable.
Route the external oscillator network close to the device and keep the associated return path compact. Separate oscillator and high-current switching traces from sensitive ADC inputs, and use a continuous ground reference beneath analog circuitry where practical. The device has eight ADC channels, so analog trace length, source impedance, filtering, and grounding can materially affect conversion accuracy.
Follow the manufacturer's power-pin connection and decoupling requirements for the 44-QFN package, including treatment of the exposed thermal pad. Place local supply capacitors close to the relevant pins and verify startup, brownout, and peripheral-current behavior on the assembled board. The MCU is specified at 5V; do not assume that 3.3V peripherals or another PIC16 variant can share the same supply domain without validation.
Do not treat a shared 44-QFN package as sufficient proof of drop-in compatibility. Before substituting PIC16F77-E/ML, PIC16F77-I/ML, PIC16LF77T-I/ML, PIC16F777T-I/ML, or PIC16F707-I/ML, compare the complete pin assignment, power pins, oscillator pins, programming interface, ADC channels, timer resources, memory map, and firmware target. This is especially important for the LF, F777, and F707 family members, whose operating domains or peripheral resources differ.
Informações de conformidade
No RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was stated in the manufacturer page or product records for this exact MPN.