PIC16F77T-I/ML - 8-Bit 20MHz Flash MCU | Microchip Technology
MPN: PIC16F77T-I/ML ✓ فعالPIC16F77T-I/ML نمای کلی
A PIC microcontroller is a compact embedded-processing device that combines a CPU core, program memory, data memory, digital I/O, timers, and analog peripherals on one integrated circuit. Within the product hierarchy, the PIC16F77 belongs to the PIC16 family of 8-bit RISC microcontrollers and combines a 200ns instruction-cycle target with a compact set of 35 single-word instructions. This structure supports economical control tasks where deterministic peripheral handling and simple embedded firmware are more important than application-processor performance.
The PIC16F77T-I/ML provides 8K program words in Flash, 368 bytes of RAM, and 33 digital I/O pins. Its 20MHz maximum operating frequency gives control loops and serial or timing routines additional headroom compared with slower PIC16 devices. The manufacturer also identifies 8 channels of 8-bit analog-to-digital conversion, plus two additional comparison functions. An external oscillator is specified for this exact device, making clock selection and startup behavior important parts of the hardware design.
The PIC architecture combines a simple instruction set with integrated peripheral functions, allowing control, timing, signal acquisition, and digital interface tasks to share one processor. Because this is a Flash-based member of the PIC16 family, firmware can be programmed and updated without a separate programmable ROM. The manufacturer describes the family as upward compatible with PIC16C5X, PIC12CXXX, and PIC16C7X devices, which helps engineers evaluate migration paths within the established Microchip ecosystem.
Typical applications include industrial controllers, sensor acquisition systems, compact instrumentation, motor and process-control equipment, and embedded products requiring numerous digital I/O channels. The 44-QFN package supports space-constrained boards, while the exposed thermal pad assists heat transfer when the device operates continuously. The broad I/O count allows external sensors, actuators, indicators, and communication peripherals to be connected without an additional large interface IC.
Hardware design should follow the manufacturer pin-assignment and decoupling guidance for the 44-lead package. Pay particular attention to the external oscillator configuration, analog-input conditioning, unused I/O states, and exposed-pad connection. Use the manufacturer pin-description table to assign tracks, and validate programming, clock, reset, and power sequencing on the assembled prototype before production release.
This product page combines the exact device identity with package, memory, interface, and application guidance, plus practical considerations for replacement screening and PCB implementation. It also distinguishes the industrial-grade temperature option from related package or family variants so procurement and engineering teams can make a traceable device-selection decision.
جایگزینهای drop-in برای PIC16F77T-I/ML — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای PIC16F77T-I/ML (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, RAM, Timers, ADC, ADC Channels.
PIC16F77-E/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F77-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16LF77T-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F777T-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F707-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F77T-I/ML حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 8-bit CMOS Flash PIC microcontroller |
| Maximum CPU Frequency | 20MHz |
| Instruction Execution Time | 200ns |
| Instruction Set | 35 single-word instructions |
| Program Memory | 14KB (8K x 14 words) |
| Program Memory Type | Flash |
| RAM | 368 x 8 bits |
| Digital I/O | 33 pins |
| ADC Resolution | 8 bits |
| ADC Channels | 8 channels |
| Additional Comparison Functions | 2 |
| Oscillator Type | External |
| Operating Voltage | 5V |
| محدوده دمای کاری | -40°C to +85°C |
| بستهبندی | 44-QFN (8x8 mm) with exposed pad |
| نوع نصب | Surface Mount |
| Packaging | Tape and Reel |
راهنمای پیکربندی پین PIC16F77T-I/ML 44-qfn (8x8 mm) with exposed pad
پیکربندی پین برای PIC16F77T-I/ML (پکیج 44-qfn (8x8 mm) with exposed pad). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای PIC16F77T-I/ML.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PIC16F77T-I/ML مناسب است برای 6 کاربردs: Industrial Sensor Acquisition Controller, Compact Process Control Module, Motor and Actuator Control, Instrumentation and Data Logger, Security and Access Control Panel, Industrial Communication Gateway.
Industrial Sensor Acquisition Controller
The PIC16F77T-I/ML fits compact sensor-acquisition equipment because it combines eight 8-bit ADC channels with 33 digital I/O pins and a 20MHz maximum clock. Engineers can sample analog inputs while using separate I/O for sensors, alarm outputs, status indicators, and actuator controls. Its -40°C to +85°C industrial temperature range suits equipment operating outside consumer-temperature limits. The external oscillator should be selected to meet the required timing accuracy, while the exposed thermal pad should be connected according to the manufacturer PCB guidance.
پیشنهادی
Compact Process Control Module
The PIC16F77T-I/ML provides enough mixed-signal and control capability for a compact process-control module without requiring a separate analog IC. Its eight ADC channels can monitor pressure, temperature, or level signals, while two comparison functions support fast threshold events. The 33 I/O pins can drive relays, valves, indicators, and digital sensors. At 20MHz, the MCU can divide control tasks between sampling, filtering, and output updates, although the final loop rate depends on the external clock and firmware execution time.
پیشنهادی
Motor and Actuator Control
The PIC16F77T-I/ML can coordinate timed actuator sequences, limit inputs, and sensor feedback in small motor-control products. Its 20MHz clock provides processing headroom for debouncing, state-machine sequencing, and diagnostic routines, while 33 I/O pins leave room for pulse inputs, direction controls, and status signals. The eight ADC channels can supervise analog feedback such as current or position when the external front end is designed appropriately. Use clean switching layout, protective drive stages, and a suitable thermal strategy for inductive loads.
پیشنهادی
Instrumentation and Data Logger
The PIC16F77T-I/ML is appropriate for compact instrumentation that must acquire several analog measurements and retain operating state in a small controller. Its 14KB of Flash supports a bootable embedded application, and 368 bytes of RAM accommodates working variables and communication buffers. The eight 8-bit ADC channels serve basic sensor measurements, while 33 I/O pins support front-panel controls, status indicators, and external memory or communications. For long-duration logging, account for the 368-byte RAM limit when defining buffering and data-retention architecture.
پیشنهادی
Security and Access Control Panel
The PIC16F77T-I/ML can manage key inputs, door sensors, indicators, and alarm outputs in a distributed access-control panel. Its 33 digital I/O lines reduce the need for multiple expander components, and the 20MHz clock supports responsive debouncing and event sequencing. The industrial temperature range covers common indoor industrial environments, while Flash preserves firmware across power cycles. As with any access-control design, validate fail-safe behavior, communication robustness, and the security requirements applicable to the deployed product.
پیشنهادی
Industrial Communication Gateway
The PIC16F77T-I/ML can serve as a protocol gateway or local controller between sensors and a higher-level communications network. Its 33 I/O pins support discrete status lines and multiple peripheral interfaces, while eight ADC channels permit local analog monitoring without a separate MCU. The 20MHz clock is suitable for moderate protocol handling and deterministic I/O tasks, although the 368 bytes of RAM limits simultaneous buffering. Select an external transceiver for the required physical layer and isolate communication routing from sensitive analog inputs.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PIC16F77T-I/ML — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | PIC16F77-E/ML | PIC16F77-I/ML | PIC16LF77T-I/ML | PIC16F777T-I/ML | PIC16F707-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-QFN (8x8 mm) with exposed pad | 44-QFN (8x8 mm) with exposed pad | 44-QFN (8x8 mm) with exposed pad | 44-VQFN exposed pad | 44-VQFN exposed pad | 44-VQFN exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Temperature Designation | /I industrial grade | /E grade | /I industrial grade | /I industrial grade | /I industrial grade | /I industrial grade |
تفاوتهای کلیدی
- Exact industrial-temperature ordering option with tape-and-reel presentation (در مقابلPIC16F77-I/ML)
- Defined 20MHz control headroom for embedded timing and acquisition (در مقابلPIC16F77-E/ML)
- Eight-channel 8-bit ADC integration reduces external sensing hardware (در مقابلPIC16F707-I/ML)
- 14KB Flash capacity for self-contained firmware (در مقابلPIC16LF77T-I/ML)
یادداشتهای طراحی
Use the exact 44-QFN land pattern and exposed-pad geometry from the manufacturer package drawing. Connect the exposed pad to the appropriate ground plane with the prescribed via and copper arrangement rather than treating it as an optional thermal feature. Preserve the package outline and pin-1 orientation on the PCB; a shared nominal pin count does not guarantee that a candidate package is mechanically interchangeable.
Route the external oscillator network close to the device and keep the associated return path compact. Separate oscillator and high-current switching traces from sensitive ADC inputs, and use a continuous ground reference beneath analog circuitry where practical. The device has eight ADC channels, so analog trace length, source impedance, filtering, and grounding can materially affect conversion accuracy.
Follow the manufacturer's power-pin connection and decoupling requirements for the 44-QFN package, including treatment of the exposed thermal pad. Place local supply capacitors close to the relevant pins and verify startup, brownout, and peripheral-current behavior on the assembled board. The MCU is specified at 5V; do not assume that 3.3V peripherals or another PIC16 variant can share the same supply domain without validation.
Do not treat a shared 44-QFN package as sufficient proof of drop-in compatibility. Before substituting PIC16F77-E/ML, PIC16F77-I/ML, PIC16LF77T-I/ML, PIC16F777T-I/ML, or PIC16F707-I/ML, compare the complete pin assignment, power pins, oscillator pins, programming interface, ADC channels, timer resources, memory map, and firmware target. This is especially important for the LF, F777, and F707 family members, whose operating domains or peripheral resources differ.
اطلاعات انطباق
No RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was stated in the manufacturer page or product records for this exact MPN.