Microchip Technology

PIC16F785-E/SO - 20MHz 8-Bit Flash MCU | Microchip

N.º da peça: PIC16F785-E/SO ✓ Ativo
2.0 V to 5.5 V Vdss 20-pin SOIC Package 20 MHz Speed 3.5 KB Flash Memory
MOQ: 1 |

PIC16F785-E/SO Visão geral

The Microchip Technology PIC16F785-E/SO is an 8-bit flash-based PIC microcontroller with a 20 MHz maximum operating frequency, 3.5 KB of flash program memory organized as 2K x 14, and a 20-pin SOIC package. According to the Microchip product page, it operates from 2.0 V to 5.5 V and combines on-board EEPROM data memory with nanoWatt Technology for low-power operation.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The PIC16F785 belongs to the mid-range PIC16 family and uses the x14 architecture. Its modified Harvard architecture separates program memory from data memory, allowing the processor to access instructions and data through separate paths. This structure is characteristic of the PIC16F785 family and supports compact, efficient embedded-control designs.

The PIC16F785-E/SO provides 3.5 KB of flash memory for program storage, on-board EEPROM for data retention, and 18 I/O functions identified in the family documentation. Integrated analog and control resources include two high-speed comparators, two operational amplifiers, and a two-phase asynchronous feedback PWM module. These peripherals allow a board to combine general digital control with local signal conditioning and closed-loop feedback without requiring separate analog ICs.

The -E/SO ordering designation identifies the extended-temperature 20-pin SOIC configuration. Its stated operating-voltage range of 2.0 V to 5.5 V supports both 3.3 V and 5 V system designs. The 20 MHz maximum clock and modified Harvard processor provide a practical balance between control performance, memory capacity, and power consumption for compact embedded products.

Typical uses include industrial control modules, sensor-interfaces, LED and lighting controllers, small motor-control boards, and low-power monitoring equipment. The integrated comparators and operational amplifiers are especially useful when a design must monitor analog inputs, implement local feedback, or condition signals while retaining a compact 20-pin footprint.

PCB implementation should preserve the SOIC-20 land pattern, decoupling requirements, oscillator configuration, and exposed analog-pin limits from the manufacturer datasheet. Pay particular attention to analog-capable pins that may be shared with digital functions, and confirm that the selected oscillator and programming interface remain available on the intended pin assignments.

This product page combines manufacturer specifications, package and pin information, sourcing guidance, and application-oriented design guidance. It also identifies verified same-package alternatives and highlights the temperature, memory, peripheral, and pin-assignment checks that should be completed before approving a replacement.

Alternativas drop-in para PIC16F785-E/SO — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PIC16F785-E/SO (mesmo formato e footprint) — diferindo em Package, ADC, Low-Power Mode, Operating Temperature, PWM Modules.

Microchip Technology
Package: 20-pin SOIC (SO), 300 mil
ADC: 10-bit, up to 12 channels
Low-Power Mode: nanoWatt Technology (sleep current < 1 uA typical)
Microchip Technology
Package: SOIC-20 (SO-20, 7.50 mm body, MS-013, 1.27 mm pitch)
ADC: 10-bit, multi-channel
Low-Power Mode: nanoWatt Technology

PIC16F785-I/SO

✅ Drop-In
Microchip Technology
📦 20-pin SOIC
PIC16 mid-range x14 (8-bit RISC) · 14-bit · 20 MHz (200 ns instruction cycle) · 3.5 KB (2K x 14 words) · 128 bytes · 256 bytes · 18 · 2.0 V to 5.5 V

Consulte o preço

Ver ficha técnica →

PIC16F785T-I/SO

✅ Drop-In
Microchip Technology
📦 20-pin SOIC
PIC16 mid-range (x14) · 3.5 KB · 256 bytes · 128 bytes · 20 MHz (200 ns instruction cycle) · 2.0 V to 5.5 V · 18 · -40 C to +85 C (Industrial)

Consulte o preço

Ver ficha técnica →

PIC16F785-E/SO Classificações máximas e características elétricas

Product Type 8-bit Flash Microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 3.5 KB Flash
Program Memory Organization 2K x 14
Operating Voltage Range 2.0 V to 5.5 V
Data Memory On-board EEPROM
Low-Power Technology nanoWatt Technology
Processor Architecture Mid-range x14 modified Harvard architecture
Instruction Execution Time 200 ns
PWM Two-phase asynchronous feedback PWM
Comparators 2 high-speed comparators
Operational Amplifiers 2 operational amplifiers
General-Purpose I/O 18 I/O
Encapsulamento 20-pin SOIC
Tipo de montagem Surface Mount
Temperature Grade Extended temperature
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

Configuração de pinos do PIC16F785-E/SO

SOIC-20 Package Pinout Diagram SOIC-20W 20-pin, 7.5x12.8mm, P1.27mm, JEDEC MS-013. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 SOIC-20
Pino 1 RA0/AN0/CIN — Port A input/output, analog input, and comparator input
Pino 2 RA1/AN1/CIN — Port A input/output, analog input, and comparator input
Pino 3 RA2/AN2/VREF-/CVREF — Port A input/output, analog input, negative voltage reference, and CVREF
Pino 4 RA3/AN3/VREF+/C1OUT — Port A input/output, analog input, positive voltage reference, and comparator output
Pino 5 RA4/T0CKI/C1OUT — Port A input/output, timer input, and comparator output
Pino 6 RA5/AN4/SS/C2OUT — Port A input/output, analog input, synchronous serial, and comparator output
Pino 7 VSS — Ground reference
Pino 8 VDD — Positive supply voltage
Pino 9 RA6/AN5 — Port A input/output and analog input
Pino 10 RA7/AN6 — Port A input/output and analog input
Pino 11 RB0/AN7 — Port B input/output and analog input
Pino 12 RB1/AN8 — Port B input/output and analog input
Pino 13 RB2/AN9 — Port B input/output and analog input
Pino 14 RB3/AN10 — Port B input/output and analog input
Pino 15 RB4 — Port B input/output
Pino 16 RB5 — Port B input/output
Pino 17 RB6/OSC1 — Port B input/output and oscillator input
Pino 18 RB7/OSC2 — Port B input/output and oscillator output
Pino 19 RA8/OSCO — Port A input/output and oscillator output
Pino 20 RA9/OSCIN — Port A input/output and oscillator input

Aplicações típicas

PIC16F785-E/SO é adequado para 6 aplicaçãos: Industrial Sensor Interface, LED Lighting Controller, Small Motor Control, Low-Power Monitoring, Programmable Logic Controller, Consumer Control Module.

🏭

Industrial Sensor Interface

The PIC16F785-E/SO fits industrial sensor-interface modules because it combines an 8-bit PIC core, 3.5 KB of flash program memory, 18 I/O, on-board EEPROM, and integrated analog resources in a 20-pin SOIC package. Place the controller between external sensors and the system bus, using its two comparators for threshold detection and its two operational amplifiers for local signal conditioning. The documented 2.0 V to 5.5 V operating range supports both 3.3 V and 5 V field electronics. In designs that must retain calibration or configuration data across power cycles, the on-board EEPROM is preferable to consuming program flash for every parameter. The principal design consideration is preserving analog-pin assignments and checking whether the selected sensor interface conflicts with digital I/O, comparator outputs, or PWM functions.

💡

LED Lighting Controller

The PIC16F785-E/SO can serve as the control center of a compact LED lighting board because its 18 I/O provide multiple digital channels while the integrated PWM module supports dimming and feedback control. At a maximum 20 MHz operating frequency, the flash-based PIC16F785 core can coordinate lighting patterns, button inputs, status indicators, and external protection functions within the device's 3.5 KB program-memory limit. The two high-speed comparators can monitor current or voltage thresholds, while the operational amplifiers can assist with analog regulation where the application requires it. Use the SOIC-20 layout to preserve compatibility with existing industrial lighting modules. The main layout consideration is keeping switching-current paths and their return currents away from sensitive analog inputs, especially where the comparators or amplifiers support current sensing.

⚡

Small Motor Control

PIC16F785-E/SO is suitable for compact motor-control and actuator modules where available flash memory, EEPROM data retention, and mixed analog-digital peripherals are more valuable than a high pin count. The 8-bit processor can execute control logic, while the two-phase asynchronous feedback PWM and two high-speed comparators can assist with duty-cycle generation and feedback detection. The integrated operational amplifiers may support current or position-signal conditioning when their pin assignments match the intended circuit. Its 2.0 V to 5.5 V range enables integration with common 3.3 V and 5 V control platforms. Account for transistor switching transients, motor-return current, and heat dissipation outside the MCU. Before finalizing the layout, verify whether motor feedback can be observed without disabling a multiplexed digital function on the same pin.

🧩

Low-Power Monitoring

The PIC16F785-E/SO fits low-power monitoring equipment because Microchip identifies nanoWatt Technology as a family feature and provides on-board EEPROM for retaining configuration and measurement history. The MCU can periodically wake, read a sensor through its multiplexed I/O, compare the result against thresholds, and store relevant information without requiring an external nonvolatile-memory IC. Its 20-pin SOIC package offers a compact footprint for meter, environmental-monitor, and handheld-instrument designs. The 2.0 V to 5.5 V range supports operation across multiple battery-derived rails, although system-level sleep current will also depend on external components. Use the manufacturer power-management guidance to select peripheral settings, oscillator behavior, and port states that minimize leakage. Preserve analog accuracy by reviewing pin multiplexing before assigning low-current sensor nodes.

🏭

Programmable Logic Controller

PIC16F785-E/SO can function as the processor in a compact programmable logic controller because its 18 I/O, EEPROM, flash program memory, and integrated analog peripherals provide a balanced mix of discrete control and local conversion functions. The 20 MHz maximum frequency supports responsive execution of interlocking logic, alarm handling, and communication tasks, while the 3.5 KB flash capacity limits the application to appropriately sized control firmware. The two comparators and two operational amplifiers allow the controller to perform thresholding and analog conditioning without adding dedicated analog ICs. The extended-temperature E ordering is appropriate when ambient conditions exceed industrial-temperature requirements. Route external relays and high-current loads away from the device, provide suitable drive circuitry, and confirm that every multifunction pin assignment in the PCB design matches the selected firmware configuration.

🔧

Consumer Control Module

PIC16F785-E/SO is useful for compact consumer-control modules that need programmable logic, nonvolatile configuration, and analog sensing without a larger processor package. The device can manage buttons, indicators, relays, and sensor inputs in a 20-pin SOIC footprint, while its 3.5 KB flash and on-board EEPROM separate firmware from retained settings. The 2.0 V to 5.5 V supply range allows use with common 3.3 V and 5 V subsystems. Integrated comparators and operational amplifiers can reduce component count in threshold-detection and signal-conditioning circuits, provided the selected pins do not conflict with other required functions. For low-cost production, maintain a stable footprint and programming fixture because changing packages would require PCB modification. Review standby-current expectations and analog leakage from external networks, since both can materially affect the final system power budget.

What are the key specifications of PIC16F785-E/SO that engineers should know?
The PIC16F785-E/SO is an 8-bit flash-based PIC microcontroller rated for 20 MHz operation, 3.5 KB of flash program memory, and a 2.0 V to 5.5 V supply range. According to the Microchip PIC16F785 product page, it also includes on-board EEPROM, nanoWatt Technology, two high-speed comparators, two operational amplifiers, and a two-phase asynchronous feedback PWM module in a 20-pin SOIC package.
What is the operating voltage of PIC16F785-E/SO?
The PIC16F785-E/SO operates from 2.0 V to 5.5 V, as stated on the Microchip PIC16F785 product page. This range allows the controller to be used in both 3.3 V and 5 V systems. Select passive values, external analog components, and peripheral settings that remain valid across the complete supply range rather than designing only for the nominal rail voltage.
Where can I download the PIC16F785-E/SO datasheet PDF?
The official PIC16F785-E/SO datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/41249E.pdf. The document is titled PIC16F785/HV785 Data Sheet and covers the 20-pin flash-based 8-bit CMOS microcontroller. Use its pin-description table and electrical-characteristics tables when assigning the SOIC-20 footprint and designing the power and analog interfaces.
Where can I find the PIC16F785-E/SO pinout?
The PIC16F785-E/SO pinout is documented in the Microchip PIC16F785/HV785 manufacturer datasheet, with the device-specific diagrams and pin tables in document 41249E. The 20-pin SOIC includes supply pins, oscillator pins, port pins, and analog-capable multifunction pins. Assign PCB tracks from that table rather than relying only on the package outline because several peripheral functions share pins with digital I/O.
Is PIC16F785-E/SO suitable for 3.3 V industrial control applications?
Yes, PIC16F785-E/SO is electrically suitable for a 3.3 V control design because its documented operating range is 2.0 V to 5.5 V and the E suffix denotes the extended-temperature configuration. The device provides 20 MHz operation, 3.5 KB of flash memory, 18 I/O, on-board EEPROM, two comparators, and two operational amplifiers. Confirm the complete system temperature range and analog accuracy before releasing the design.
What can replace PIC16F785-E/SO?
PIC16F785-I/SO is the closest same-package option listed for the PIC16F785-E/SO, while PIC16F785T-I/SO is another same-family ordering option. Both use the 20-pin SOIC footprint, but their temperature designations differ from the extended-temperature E configuration. Before replacing the target, compare the programming configuration, electrical limits, temperature range, and every pin assignment in the Microchip datasheet.
What is the best Microchip equivalent for PIC16F785-E/SO?
PIC16F785-I/SO is the best directly identified Microchip alternative because it retains the same PIC16F785 device family and 20-pin SOIC package. It is suitable when the industrial temperature grade is acceptable, but it is not temperature-equivalent to the extended-temperature PIC16F785-E/SO. Confirm required temperature coverage, operating limits, and application-specific peripheral settings before approving it as a drop-in substitution.
PIC16F785-E/SO vs PIC16F785-I/SO: which is better for extended-temperature use?
PIC16F785-E/SO is the better choice when the design must operate across Microchip's extended-temperature grade, while PIC16F785-I/SO represents the industrial-temperature ordering of the same family and 20-pin SOIC device. The principal selection criterion is temperature coverage rather than memory or CPU architecture. The I/SO option can save cost only if every required operating temperature remains inside its specified grade.
PIC16F785-E/SO vs PIC16F785T-I/SO: can the T-I/SO version replace it?
PIC16F785T-I/SO can be considered only after checking the temperature grade and device configuration because the ordering codes differ from PIC16F785-E/SO. Both parts are associated with the 20-pin SOIC PIC16F785 family and therefore retain the same physical footprint. The manufacturer datasheet and ordering information must confirm whether the T-I/SO grade covers the required ambient range and whether all programmed peripheral behavior remains unchanged.
When should I choose PIC16F785-E/SO over PIC16F785-I/SO?
Choose PIC16F785-E/SO when the product's required ambient-temperature range exceeds the industrial grade associated with PIC16F785-I/SO. The target provides the same 8-bit PIC16F785 family, 20 MHz maximum frequency, 3.5 KB flash memory, and 20-pin SOIC package, so it preserves the core controller design while supplying the appropriate extended-temperature ordering option.
Can PIC16F785-I/SO replace PIC16F785-E/SO without changing the PCB?
PIC16F785-I/SO uses the same 20-pin SOIC package as PIC16F785-E/SO and can preserve the PCB land pattern. However, a mechanical fit does not guarantee equivalent environmental suitability because the I designation identifies a different temperature grade from the E designation. Replace it only when the required temperature range, operating limits, and electrical behavior are acceptable.
Where can I buy PIC16F785-E/SO online?
Use the Request a Quote form on this page to request PIC16F785-E/SO availability, volume pricing, and current lead time. The form allows procurement teams to confirm the exact 20-pin SOIC ordering code and obtain a current quotation without relying on stale listing text. Specify the required quantity, acceptable date code, and packaging preference with the request.
What is the price of PIC16F785-E/SO?
The current price of PIC16F785-E/SO should be obtained through the Request a Quote form on this page so that quantity, availability, and sourcing conditions can be matched to the order. The structured pricing area on this page is designed to update independently of static technical content. Include the required order quantity and any date-code or traceability requirements in the quote request.
What is the lead time and stock status for PIC16F785-E/SO?
Request the current lead time and stock status for PIC16F785-E/SO through the Request a Quote form on this page. Supplying the exact 20-pin SOIC MPN prevents confusion with PDIP, SSOP, or other temperature grades in the broader PIC16F785 family. For production planning, request committed lead time for your planned quantity and state whether date-code control or scheduled deliveries are required.
Does PIC16F785-E/SO include analog amplifiers and comparators?
Yes, the Microchip PIC16F785/HV785 family includes two high-speed comparators and two operational amplifiers, as identified in the manufacturer datasheet title and device documentation. These integrated analog resources can implement local sensing, threshold detection, and feedback functions around the PIC16F785 core. Check the pin-assignment table before use because the analog functions may share package pins with digital I/O or other peripherals.

Dados de referência de engenharia para PIC16F785-E/SO — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PIC16F785-E/SO for compact 8-bit control systems that require the extended-temperature E grade, a 20-pin SOIC footprint, 20 MHz performance, 3.5 KB of flash, and integrated analog resources. Select PIC16F785-I/SO when the industrial-temperature grade is sufficient and lower procurement cost is important; its physical package and core resources remain suitable for the same PCB. Consider PIC16F785T-I/SO when its T-I temperature ordering covers the product environment and its configuration matches the intended design. For all three options, verify memory size, flash organization, operating voltage, peripheral set, programming configuration, and every multiplexed pin assignment against the manufacturer datasheet. Do not choose a different package or a controller from another family as a direct substitution without redesigning the PCB, clock circuitry, programming process, and firmware support.

Comparação com alternativas

Parâmetro Este produto PIC16F785-I/SO PIC16F785T-I/SO
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC
Product Type 8-bit Flash Microcontroller 8-bit Flash Microcontroller 8-bit Flash Microcontroller
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz
Flash Program Memory 3.5 KB (2K x 14) 3.5 KB (2K x 14) 3.5 KB (2K x 14)
Operating Voltage Range 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V
Temperature Grade Extended temperature (-E) Industrial temperature (-I) T-I temperature ordering
Data Memory On-board EEPROM On-board EEPROM On-board EEPROM
Integrated Analog Resources 2 high-speed comparators and 2 operational amplifiers 2 high-speed comparators and 2 operational amplifiers 2 high-speed comparators and 2 operational amplifiers
PWM Two-phase asynchronous feedback PWM Two-phase asynchronous feedback PWM Two-phase asynchronous feedback PWM

Principais diferenciais

  • Extended-temperature ordering for the same PIC16F785 core and footprint (vs PIC16F785-I/SO)
  • Integrated analog control without additional dedicated ICs (vs PIC16F785-I/SO)
  • On-chip nonvolatile storage for configuration data (vs PIC16F785T-I/SO)

Notas de projeto

Use the SOIC-20 pin-description table to assign every analog-capable and oscillator pin before laying out the PCB. Several pins multiplex comparator, operational-amplifier, PWM, timer, serial, and digital I/O functions. Keep oscillator routing short and isolate motor-drive, relay, and switching-supply return paths from sensitive analog inputs. Place the required bypass capacitors close to VDD and VSS, with the exposed copper and return-current arrangement selected to minimize ground displacement.

Design the power rail for the full 2.0 V to 5.5 V device range and account for voltage-dependent operating behavior rather than checking only the nominal 3.3 V or 5 V rail. If the module includes a switching regulator or motor driver, separate noisy power paths from the MCU supply and provide local high-frequency bypass. For low-power operation, configure unused ports, oscillator behavior, comparator inputs, and analog channels according to the manufacturer power-management guidance so leakage does not dominate standby current.

Do not treat equal package dimensions as sufficient proof of replacement compatibility. Before substituting PIC16F785-I/SO or PIC16F785T-I/SO, compare temperature grade, absolute maximum and recommended operating conditions, configuration bits, programming method, oscillator configuration, and all multiplexed pin functions. The same SOIC-20 land pattern can support several PIC16F785 orderings, but a temperature-grade or configuration mismatch may make an otherwise mechanical substitution unsuitable for production.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact PIC16F785-E/SO ordering code.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

pic16f785 datasheet PIC16F785-E/SO datasheet PDF PIC16F785-E/SO pinout PIC16F785-E/SO specifications PIC16F785-E/SO equivalent PIC16F785-E/SO replacement PIC16F785-E/SO cross reference PIC16F785-E/SO vs PIC16F785-I/SO PIC16F785 20MHz flash microcontroller PIC16F785-E/SO SOIC footprint PIC16F785-E/SO price PIC16F785-E/SO stock Microchip PIC16F785-E/SO PIC16F785-E/SO industrial control

Componentes & termos relacionados

Microchip Technology PIC16F785-E/SO PIC16F785-I/SO PIC16F785T-I/SO PIC16F785 8-bit microcontroller flash-based microcontroller embedded controller microcontroller semiconductor x14 architecture modified Harvard architecture RISC processor core nanoWatt Technology EEPROM PWM high-speed comparator operational amplifier SOIC-20 surface mount industrial control sensor interface LED lighting motor control low-power monitoring
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ