PIC16F785-E/SO - 20MHz 8-Bit Flash MCU | Microchip
料号: PIC16F785-E/SO ✓ 量产中PIC16F785-E/SO 概述
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The PIC16F785 belongs to the mid-range PIC16 family and uses the x14 architecture. Its modified Harvard architecture separates program memory from data memory, allowing the processor to access instructions and data through separate paths. This structure is characteristic of the PIC16F785 family and supports compact, efficient embedded-control designs.
The PIC16F785-E/SO provides 3.5 KB of flash memory for program storage, on-board EEPROM for data retention, and 18 I/O functions identified in the family documentation. Integrated analog and control resources include two high-speed comparators, two operational amplifiers, and a two-phase asynchronous feedback PWM module. These peripherals allow a board to combine general digital control with local signal conditioning and closed-loop feedback without requiring separate analog ICs.
The -E/SO ordering designation identifies the extended-temperature 20-pin SOIC configuration. Its stated operating-voltage range of 2.0 V to 5.5 V supports both 3.3 V and 5 V system designs. The 20 MHz maximum clock and modified Harvard processor provide a practical balance between control performance, memory capacity, and power consumption for compact embedded products.
Typical uses include industrial control modules, sensor-interfaces, LED and lighting controllers, small motor-control boards, and low-power monitoring equipment. The integrated comparators and operational amplifiers are especially useful when a design must monitor analog inputs, implement local feedback, or condition signals while retaining a compact 20-pin footprint.
PCB implementation should preserve the SOIC-20 land pattern, decoupling requirements, oscillator configuration, and exposed analog-pin limits from the manufacturer datasheet. Pay particular attention to analog-capable pins that may be shared with digital functions, and confirm that the selected oscillator and programming interface remain available on the intended pin assignments.
This product page combines manufacturer specifications, package and pin information, sourcing guidance, and application-oriented design guidance. It also identifies verified same-package alternatives and highlights the temperature, memory, peripheral, and pin-assignment checks that should be completed before approving a replacement.
直接替换替代料: PIC16F785-E/SO ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC16F785-E/SO (相同外形与封装尺寸) ——差异在于 Package, ADC, Low-Power Mode, Operating Temperature, PWM Modules.
PIC16F785-I/SO
✅ 直接替换联系询价
查看数据手册 →PIC16F785T-I/SO
✅ 直接替换联系询价
查看数据手册 →PIC16F785-E/SO 最大额定值与电气特性
| Product Type | 8-bit Flash Microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 3.5 KB Flash |
| Program Memory Organization | 2K x 14 |
| Operating Voltage Range | 2.0 V to 5.5 V |
| Data Memory | On-board EEPROM |
| Low-Power Technology | nanoWatt Technology |
| Processor Architecture | Mid-range x14 modified Harvard architecture |
| Instruction Execution Time | 200 ns |
| PWM | Two-phase asynchronous feedback PWM |
| Comparators | 2 high-speed comparators |
| Operational Amplifiers | 2 operational amplifiers |
| General-Purpose I/O | 18 I/O |
| 封装 | 20-pin SOIC |
| 安装类型 | Surface Mount |
| Temperature Grade | Extended temperature |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
PIC16F785-E/SO 引脚配置
| 引脚 1 | RA0/AN0/CIN — Port A input/output, analog input, and comparator input |
| 引脚 2 | RA1/AN1/CIN — Port A input/output, analog input, and comparator input |
| 引脚 3 | RA2/AN2/VREF-/CVREF — Port A input/output, analog input, negative voltage reference, and CVREF |
| 引脚 4 | RA3/AN3/VREF+/C1OUT — Port A input/output, analog input, positive voltage reference, and comparator output |
| 引脚 5 | RA4/T0CKI/C1OUT — Port A input/output, timer input, and comparator output |
| 引脚 6 | RA5/AN4/SS/C2OUT — Port A input/output, analog input, synchronous serial, and comparator output |
| 引脚 7 | VSS — Ground reference |
| 引脚 8 | VDD — Positive supply voltage |
| 引脚 9 | RA6/AN5 — Port A input/output and analog input |
| 引脚 10 | RA7/AN6 — Port A input/output and analog input |
| 引脚 11 | RB0/AN7 — Port B input/output and analog input |
| 引脚 12 | RB1/AN8 — Port B input/output and analog input |
| 引脚 13 | RB2/AN9 — Port B input/output and analog input |
| 引脚 14 | RB3/AN10 — Port B input/output and analog input |
| 引脚 15 | RB4 — Port B input/output |
| 引脚 16 | RB5 — Port B input/output |
| 引脚 17 | RB6/OSC1 — Port B input/output and oscillator input |
| 引脚 18 | RB7/OSC2 — Port B input/output and oscillator output |
| 引脚 19 | RA8/OSCO — Port A input/output and oscillator output |
| 引脚 20 | RA9/OSCIN — Port A input/output and oscillator input |
典型应用
PIC16F785-E/SO 适用于 6 应用s: Industrial Sensor Interface, LED Lighting Controller, Small Motor Control, Low-Power Monitoring, Programmable Logic Controller, Consumer Control Module.
Industrial Sensor Interface
The PIC16F785-E/SO fits industrial sensor-interface modules because it combines an 8-bit PIC core, 3.5 KB of flash program memory, 18 I/O, on-board EEPROM, and integrated analog resources in a 20-pin SOIC package. Place the controller between external sensors and the system bus, using its two comparators for threshold detection and its two operational amplifiers for local signal conditioning. The documented 2.0 V to 5.5 V operating range supports both 3.3 V and 5 V field electronics. In designs that must retain calibration or configuration data across power cycles, the on-board EEPROM is preferable to consuming program flash for every parameter. The principal design consideration is preserving analog-pin assignments and checking whether the selected sensor interface conflicts with digital I/O, comparator outputs, or PWM functions.
推荐
LED Lighting Controller
The PIC16F785-E/SO can serve as the control center of a compact LED lighting board because its 18 I/O provide multiple digital channels while the integrated PWM module supports dimming and feedback control. At a maximum 20 MHz operating frequency, the flash-based PIC16F785 core can coordinate lighting patterns, button inputs, status indicators, and external protection functions within the device's 3.5 KB program-memory limit. The two high-speed comparators can monitor current or voltage thresholds, while the operational amplifiers can assist with analog regulation where the application requires it. Use the SOIC-20 layout to preserve compatibility with existing industrial lighting modules. The main layout consideration is keeping switching-current paths and their return currents away from sensitive analog inputs, especially where the comparators or amplifiers support current sensing.
推荐
Small Motor Control
PIC16F785-E/SO is suitable for compact motor-control and actuator modules where available flash memory, EEPROM data retention, and mixed analog-digital peripherals are more valuable than a high pin count. The 8-bit processor can execute control logic, while the two-phase asynchronous feedback PWM and two high-speed comparators can assist with duty-cycle generation and feedback detection. The integrated operational amplifiers may support current or position-signal conditioning when their pin assignments match the intended circuit. Its 2.0 V to 5.5 V range enables integration with common 3.3 V and 5 V control platforms. Account for transistor switching transients, motor-return current, and heat dissipation outside the MCU. Before finalizing the layout, verify whether motor feedback can be observed without disabling a multiplexed digital function on the same pin.
推荐
Low-Power Monitoring
The PIC16F785-E/SO fits low-power monitoring equipment because Microchip identifies nanoWatt Technology as a family feature and provides on-board EEPROM for retaining configuration and measurement history. The MCU can periodically wake, read a sensor through its multiplexed I/O, compare the result against thresholds, and store relevant information without requiring an external nonvolatile-memory IC. Its 20-pin SOIC package offers a compact footprint for meter, environmental-monitor, and handheld-instrument designs. The 2.0 V to 5.5 V range supports operation across multiple battery-derived rails, although system-level sleep current will also depend on external components. Use the manufacturer power-management guidance to select peripheral settings, oscillator behavior, and port states that minimize leakage. Preserve analog accuracy by reviewing pin multiplexing before assigning low-current sensor nodes.
推荐
Programmable Logic Controller
PIC16F785-E/SO can function as the processor in a compact programmable logic controller because its 18 I/O, EEPROM, flash program memory, and integrated analog peripherals provide a balanced mix of discrete control and local conversion functions. The 20 MHz maximum frequency supports responsive execution of interlocking logic, alarm handling, and communication tasks, while the 3.5 KB flash capacity limits the application to appropriately sized control firmware. The two comparators and two operational amplifiers allow the controller to perform thresholding and analog conditioning without adding dedicated analog ICs. The extended-temperature E ordering is appropriate when ambient conditions exceed industrial-temperature requirements. Route external relays and high-current loads away from the device, provide suitable drive circuitry, and confirm that every multifunction pin assignment in the PCB design matches the selected firmware configuration.
推荐
Consumer Control Module
PIC16F785-E/SO is useful for compact consumer-control modules that need programmable logic, nonvolatile configuration, and analog sensing without a larger processor package. The device can manage buttons, indicators, relays, and sensor inputs in a 20-pin SOIC footprint, while its 3.5 KB flash and on-board EEPROM separate firmware from retained settings. The 2.0 V to 5.5 V supply range allows use with common 3.3 V and 5 V subsystems. Integrated comparators and operational amplifiers can reduce component count in threshold-detection and signal-conditioning circuits, provided the selected pins do not conflict with other required functions. For low-cost production, maintain a stable footprint and programming fixture because changing packages would require PCB modification. Review standby-current expectations and analog leakage from external networks, since both can materially affect the final system power budget.
推荐
推荐产品汇总
工程参考数据: PIC16F785-E/SO ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16F785-I/SO | PIC16F785T-I/SO |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| Product Type | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz |
| Flash Program Memory | 3.5 KB (2K x 14) | 3.5 KB (2K x 14) | 3.5 KB (2K x 14) |
| Operating Voltage Range | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Temperature Grade | Extended temperature (-E) | Industrial temperature (-I) | T-I temperature ordering |
| Data Memory | On-board EEPROM | On-board EEPROM | On-board EEPROM |
| Integrated Analog Resources | 2 high-speed comparators and 2 operational amplifiers | 2 high-speed comparators and 2 operational amplifiers | 2 high-speed comparators and 2 operational amplifiers |
| PWM | Two-phase asynchronous feedback PWM | Two-phase asynchronous feedback PWM | Two-phase asynchronous feedback PWM |
关键差异点
- Extended-temperature ordering for the same PIC16F785 core and footprint (对比 PIC16F785-I/SO)
- Integrated analog control without additional dedicated ICs (对比 PIC16F785-I/SO)
- On-chip nonvolatile storage for configuration data (对比 PIC16F785T-I/SO)
设计说明
Use the SOIC-20 pin-description table to assign every analog-capable and oscillator pin before laying out the PCB. Several pins multiplex comparator, operational-amplifier, PWM, timer, serial, and digital I/O functions. Keep oscillator routing short and isolate motor-drive, relay, and switching-supply return paths from sensitive analog inputs. Place the required bypass capacitors close to VDD and VSS, with the exposed copper and return-current arrangement selected to minimize ground displacement.
Design the power rail for the full 2.0 V to 5.5 V device range and account for voltage-dependent operating behavior rather than checking only the nominal 3.3 V or 5 V rail. If the module includes a switching regulator or motor driver, separate noisy power paths from the MCU supply and provide local high-frequency bypass. For low-power operation, configure unused ports, oscillator behavior, comparator inputs, and analog channels according to the manufacturer power-management guidance so leakage does not dominate standby current.
Do not treat equal package dimensions as sufficient proof of replacement compatibility. Before substituting PIC16F785-I/SO or PIC16F785T-I/SO, compare temperature grade, absolute maximum and recommended operating conditions, configuration bits, programming method, oscillator configuration, and all multiplexed pin functions. The same SOIC-20 land pattern can support several PIC16F785 orderings, but a temperature-grade or configuration mismatch may make an otherwise mechanical substitution unsuitable for production.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact PIC16F785-E/SO ordering code.