PIC16LC74A-04I/L - 8-Bit 4MHz MCU, 7KB OTP, 44-PLCC | Microchip
N.º da peça: PIC16LC74A-04I/L ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $5.81 | $5,81 |
| 10 | $5.32 | $53,20 |
| 100 | $4.74 | $474,00 |
| 500 | $4.21 | $2.105,00 |
| 1.000 | $3.79 | $3.790,00 |
PIC16LC74A-04I/L Visão geral
Key features include 33 digital I/O lines, an integrated multi-channel analog-to-digital converter, and a wide operating voltage range of 2.5 V to 6.0 V that makes it suitable for battery-powered and industrial applications. The device is built on Microchip's mid-range 8-bit core architecture with a fully-static design, allowing the clock to be stopped without losing register state for low-power sleep modes. An industrial temperature grade (-40 °C to +85 °C) and on-chip peripherals such as timers, a synchronous/asynchronous serial port (USART/SCI), and capture/compare/PWM modules make it a versatile embedded controller.
The PIC16LC74A-04I/L utilizes an enhanced Harvard architecture with separate program and data buses, and a 14-bit wide instruction word that improves arithmetic and bit-handling density. OTP (One-Time Programmable) program memory enables low-cost production for high-volume, fixed-code applications where field re-programmability is not required. The 'LC' suffix indicates the low-power CMOS process variant that supports the 2.5 V minimum supply voltage, lower quiescent current, and reduced switching noise compared with the standard EPROM-based PIC16C74 family.
Typical applications include industrial control systems, instrumentation front panels, motor-control interface boards, and consumer appliances. The integrated ADC and ample I/O count also make this device well suited to sensor interfaces, smart-card readers, and embedded human-machine interface (HMI) controllers.
When designing with this part, ensure that the OTP memory programming environment matches production volume economics, and validate oscillator stability at the application's extremes of voltage and temperature. For prototypes or low-volume builds, consider a flash-based PIC16F equivalent in the same PLCC-44 footprint to ease firmware iteration.
This page synthesizes distributor pricing, drop-in PLCC-44 alternatives, and practical engineering guidance beyond what the manufacturer datasheet alone provides.
Alternativas drop-in para PIC16LC74A-04I/L — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC16LC74A-04I/L (mesmo formato e footprint) — diferindo em Package, Program Memory Size, Mounting Type, Timers, ADC.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC16C74B-04I/L
✅ Drop-In✓ Em estoque
$2.61 / unidade
Ver ficha técnica →PIC16LC74A-04I/P
✅ Drop-In✓ Em estoque
$4.5 / unidade
Ver ficha técnica →PIC16LC74AT-04I/L
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC16LF74-I/L
✅ Drop-In✓ Em estoque
$4.32 / unidade
Ver ficha técnica →PIC16LC64AT-04I/L
✅ Drop-In✓ Em estoque
$7.5 / unidade
Ver ficha técnica →PIC16LC662-04/L
✅ Drop-In✓ Em estoque
$4.95 / unidade
Ver ficha técnica →PIC16LC74A-04I/L Classificações máximas e características elétricas
| Core | PIC16 mid-range 8-bit |
| Family | PIC16C7x |
| Architecture | Harvard, 14-bit instruction word |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 7 KB (4 K x 14) |
| Data RAM | 192 bytes |
| Maximum Clock Speed | 4 MHz |
| Supply Voltage (Vdd) | 2.5 V to 6.0 V |
| I/O Pins | 33 (per distributor listing) |
| ADC | Integrated multi-channel |
| Timers | Multiple 8/16-bit |
| Communication | USART/SCI, SPI, I2C |
| Temperatura de operação | -40 °C to +85 °C (Industrial) |
| Encapsulamento | 44-pin PLCC, 16.59 x 16.59 mm (J-Lead) |
| Tipo de montagem | Surface Mount |
| ROM Type | OTP |
| Lifecycle Stage | Active |
Guia de Configuração de Pinos do PIC16LC74A-04I/L 44-pin plcc, 16.59 x 16.59 mm (j-lead)
Configuração de pinos para PIC16LC74A-04I/L (pacote 44-pin plcc, 16.59 x 16.59 mm (j-lead)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC16LC74A-04I/L.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC16LC74A-04I/L é adequado para 6 aplicaçãos: Industrial Control Systems, Instrumentation Front Panels, Consumer Appliance Controllers, Motor Control and PWM Drives, Sensor Interface Hubs, Embedded HMI Controllers.
Industrial Control Systems
The PIC16LC74A-04I/L is well suited to industrial control PLCs and machine-interface boards where deterministic 8-bit performance and ruggedized operation matter. Its 33 I/O pins drive relays, optocouplers, and discrete transistor switches for solenoid and motor-control signaling. The wide 2.5 V to 6.0 V supply and -40 °C to +85 °C industrial range tolerate 24 V-bus-derived rails after regulation. Onboard timers and PWM modules drive triac-firing controls. The 4 MHz clock is sufficient for slow control loops at millisecond rates.
Recomendado
Instrumentation Front Panels
Bench instruments, signal generators, and multimeters rely on the PIC16LC74A-04I/L's integrated ADC and USART for measurement and host communication. The 7 KB OTP program memory holds calibration tables, button-debounce routines, and LCD-driving state machines. The 44-pin PLCC socket-mount form factor eases prototype swap to late prototyping HMI designs. The 2.5 V minimum supply allows single-cell battery or 3.3 V regulated powering, while the integrated peripherals drive character LCDs and rotary switches with no decoder chain.
Recomendado
Consumer Appliance Controllers
Washing machines, microwave ovens, and air-conditioner control boards frequently use the PIC16LC74A-04I/L as the main MCU thanks to its OTP cost-effectiveness at high volume. The integrated ADC reads thermistor and voltage-sense signals for closed-loop control. The 33 I/O lines drive seven-segment displays, keypads, and triac outputs for heater and compressor switching. The 4 MHz core delivers responsive user-interface feedback at low BOM cost. The 2.5 V to 6.0 V range simplifies universal power-supply designs.
Recomendado
Motor Control and PWM Drives
Stepper-motor and small DC brushless drivers benefit from the PIC16LC74A-04I/L's capture/compare/PWM peripherals and quadrature-encoder reading capability. The 4 MHz instruction cycle supports closed-loop commutation at moderate mechanical speeds. The 33 I/O lines interface to gate drivers and current-sense amplifiers with minimal external logic. OTP cost-effectiveness makes it suitable for high-volume integrated motor-control modules. Industrial temperature grade supports under-hood automotive accessory motors and pump controllers.
Recomendado
Sensor Interface Hubs
Sensor-hub boards aggregating temperature, pressure, and switch inputs leverage the PIC16LC74A-04I/L's integrated multi-channel ADC and serial peripherals. The I2C/SPI interfaces connect to external digital sensors and EEPROM for data logging. The 192-byte RAM supports short buffer histories. Low-voltage operation supports battery-powered sensor nodes. The 44-pin PLCC offers enough I/O for prototyping larger sensor arrays. Industrial-grade temperature tolerance handles outdoor and industrial environments.
Recomendado
Embedded HMI Controllers
Human-machine interface controllers in elevators, kiosks, and access panels use the PIC16LC74A-04I/L to scan keypads, drive character LCDs, and serialize control traffic over UART. The 7 KB OTP holds keypad-debounce tables and menu state machines. 33 I/O lines scan 4x4 keypads plus LCD data, four state and color lines, and segment drivers. PIC16C mid-range architecture supports stable firmware in long-life HMI products. Industrial-grade temperature range tolerates field installations.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC16LC74A-04I/L — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC16C74B-04I/L | PIC16LC74A-04I/P | PIC16LC74AT-04I/L | PIC16LF74-I/L | PIC16LC64AT-04I/L | PIC16LC662-04/L |
|---|---|---|---|---|---|---|---|
| Package | 44-PLCC (J-Lead) | 44-PLCC (J-Lead) - same | 44-PLCC equivalent - same | 44-PLCC (J-Lead) - same | 44-PLCC (J-Lead) - same | 44-PLCC (J-Lead) - same | 44-PLCC (J-Lead) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | PIC16 mid-range 8-bit | PIC16 mid-range 8-bit | PIC16 mid-range 8-bit | PIC16 mid-range 8-bit | PIC16 mid-range 8-bit | PIC16 mid-range 8-bit | PIC16 mid-range 8-bit |
| Program Memory | 7 KB OTP | 7 KB EPROM/OTP | 7 KB OTP | 7 KB OTP | 7 KB Flash | 7 KB OTP | OTP |
| Maximum Clock | 4 MHz | 4 MHz (also 20 MHz variants) | 4 MHz | 4 MHz | 20 MHz | 4 MHz | 4 MHz |
| Supply Voltage | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V | 2.0 V to 6.0 V | 2.5 V to 6.0 V | 2.5 V to 6.0 V |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 | 33 |
| ADC | Integrated multi-channel | Integrated multi-channel | Integrated multi-channel | Integrated multi-channel | Integrated multi-channel | Integrated multi-channel | Integrated multi-channel |
| Memory Type | OTP | EPROM/OTP | OTP | OTP | Flash | OTP | OTP |
Principais diferenciais
- Wider supply voltage range from 2.5 V (vs PIC16LC64A-04I/P)
- Lower per-unit cost for high-volume production (vs PIC16LF74-I/L)
- Larger 7 KB program memory vs PIC16C66 family (vs PIC16LC66-04I/SO)
Notas de projeto
The PIC16LC74A-04I/L accepts 2.5 V to 6.0 V on Vdd. Place a 100 nF decoupling capacitor as close as possible to the Vdd pin, plus a bulk 10 µF tantalum or ceramic capacitor on the main supply rail. For battery-powered designs, add a small RC filter on MCLR to suppress spurious resets during supply transients and brown-out conditions.
Because OTP program memory is not user-reprogrammable in-circuit, design teams should fully validate firmware on a flash-based PIC16LF74-I/L or windowed CERDIP PIC16C74A before committing to OTP for production. A single firmware bug in the final masked ROM requires a new wafer lot, leading to long re-quotes and weeks of inventory loss.
The 44-pin PLCC socket (e.g., 3M 8400-series) is recommended for prototyping because it allows quick device swaps between PIC16LC74A and PIC16LF74 flash variants. For surface-mount production, the PLCC J-lead footprint is also suitable for reflow soldering. Maintain at least 0.1 inch clearance around the PLCC outline for cleaning and inspection access.
The PLCC-44 package has a typical theta-JA of around 50 C/W in still air. At 4 MHz and 5 V supply, the device dissipates well under 100 mW even at full I/O toggling, so no heatsink is needed. For sealed IP67 enclosures, derate ambient temperature by 10-15 °C to account for reduced convection.
Informações de conformidade
Compliance status not explicitly stated in the Verified Web Data; please consult the manufacturer datasheet for confirmed RoHS/lead-free status. AEC-Q100 not applicable - this is a general-purpose industrial MCU, not automotive-grade.
