PIC17C762-16E/L - 16MHz 8-bit OTP MCU, 16KB, 84-PLCC | Microchip
N.º da peça: PIC17C762-16E/L ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $9.95 | $9,95 |
| 10 | $8.95 | $89,50 |
| 100 | $7.65 | $765,00 |
| 500 | $6.85 | $3.425,00 |
| 1.000 | $6.1 | $6.100,00 |
PIC17C762-16E/L Visão geral
What is an OTP microcontroller? An OTP (One-Time-Programmable) microcontroller is a class of MCU whose internal program memory can be written exactly once after manufacture, typically using a programmer, and cannot subsequently be erased or rewritten. This places OTP MCUs in the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC -> CMOS logic. PIC17C762-16E/L belongs to the legacy PIC17C family, which Microchip itself now flags as obsolete and recommends migrating to the modern PIC18F8520 (per the official Microchip product page notice).
Key features include a RISC architecture with only 58 single-word instructions to learn, single-cycle execution on all instructions except program branches and table reads/writes (which take two cycles / 242 ns), wide operating voltage (4.5 V to 5.5 V), industrial/automotive-grade temperature option, plus brown-out detect, power-on reset, and watchdog timer for robust embedded designs.
Architecturally, the PIC17C762 uses a 16-bit instruction word with an 8-bit data path and a 16-level deep hardware stack. The Harvard-style memory map separates program (16 KB OTP) from data (678 bytes SRAM + 64 bytes EEPROM-equivalent registers), enabling deterministic single-cycle instruction fetch.
Typical applications span industrial control panels, motor drive front-ends (using PWM + ADC for closed-loop sensing), automotive body and chassis ECUs, HVAC controllers, and legacy embedded systems still in production or long-life service. For new designs Microchip explicitly recommends the PIC18F8520 or dsPIC33 families.
Design consideration: PIC17C762-16E/L is OTP, so firmware revisions require a new physical part. Plan for a flash-based equivalent (PIC18F8520) during board bring-up to allow code iteration. Operating at 16 MHz requires a stable 4.5 V - 5.5 V rail; add decoupling (100 nF + 10 uF) close to VDD/VSS pins.
This page synthesizes distributor stock levels, OTP/Flash migration guidance, and practical design notes not found in the manufacturer datasheet alone, giving engineers and procurement teams a single decision-ready reference.
Alternativas drop-in para PIC17C762-16E/L — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC17C762-16E/L (mesmo formato e footprint) — diferindo em Data Bus Width, Package, Program Memory Type, ADC, Program Memory Size.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC17C762-16/L
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$12.5 / unidade
Ver ficha técnica →PIC17C762-16I/L
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC17C756A-16I/PT
✅ Drop-In✓ Em estoque
$11.2 / unidade
Ver ficha técnica →PIC17C756A-16E/PT
✅ Drop-In✓ Em estoque
$16.8 / unidade
Ver ficha técnica →PIC17C762-16/PT
✅ Drop-In✓ Em estoque
$9.25 / unidade
Ver ficha técnica →PIC17C762-16E/L Classificações máximas e características elétricas
| Core | PIC 8-bit RISC |
| Instruction Set Width | 16-bit |
| Number of Instructions | 58 single-word |
| Frequência máxima de clock | 16 MHz |
| Performance | 16 MIPS (121 ns instruction cycle) |
| Program Memory Type | OTP (One-Time-Programmable) |
| Program Memory Size | 16 KB (8K x 16) |
| RAM | 678 bytes |
| Largura do barramento de dados | 8-bit |
| Tensão de alimentação | 4.5 V to 5.5 V |
| I/O Pins | 50 |
| ADC | 16-channel x 10-bit |
| Communication Interfaces | I2C, SPI, UART/USART |
| Peripherals | PWM, Brown-out Detect, POR, WDT |
| Encapsulamento | 84-PLCC (J-Lead), 29.31 x 29.31 mm |
| Operating Temperature (E suffix) | -40 C to +125 C (extended) |
| Tipo de montagem | Surface Mount |
Configuração de pinos do PIC17C762-16E/L
| Pino 1 | RA0/AN0 — PORTA bit 0 / ADC input 0 |
| Pino 2 | RA1/AN1 — PORTA bit 1 / ADC input 1 |
| Pino 3 | RA2/AN2 — PORTA bit 2 / ADC input 2 |
| Pino 4 | RA3/AN3 — PORTA bit 3 / ADC input 3 |
| Pino 5 | RA4/AN4 — PORTA bit 4 / ADC input 4 |
| Pino 6 | RA5/AN5 — PORTA bit 5 / ADC input 5 |
| Pino 7 | RA6/OSC1 — PORTA bit 6 / crystal oscillator input |
| Pino 8 | RA7/OSC2 — PORTA bit 7 / crystal oscillator output |
| Pino 9 | VDD — Positive supply (5V) |
| Pino 10 | VSS — Ground |
| Pino 11 | RB0/INT — PORTB bit 0 / external interrupt |
| Pino 12 | RB1 — PORTB bit 1 |
| Pino 13 | RB2 — PORTB bit 2 |
| Pino 14 | RB3 — PORTB bit 3 |
| Pino 15 | RB4 — PORTB bit 4 |
| Pino 16 | RB5 — PORTB bit 5 |
| Pino 17 | RB6 — PORTB bit 6 |
| Pino 18 | RB7 — PORTB bit 7 |
| Pino 19 | RC0 — PORTC bit 0 |
| Pino 20 | RC1 — PORTC bit 1 |
| Pino 21 | RC2 — PORTC bit 2 |
| Pino 22 | RC3 — PORTC bit 3 |
| Pino 23 | RC4 — PORTC bit 4 |
| Pino 24 | RC5 — PORTC bit 5 |
| Pino 25 | RC6 — PORTC bit 6 |
| Pino 26 | RC7 — PORTC bit 7 |
| Pino 27 | RD0 — PORTD bit 0 |
| Pino 28 | RD1 — PORTD bit 1 |
| Pino 29 | RD2 — PORTD bit 2 |
| Pino 30 | RD3 — PORTD bit 3 |
| Pino 31 | RD4 — PORTD bit 4 |
| Pino 32 | RD5 — PORTD bit 5 |
| Pino 33 | RD6 — PORTD bit 6 |
| Pino 34 | RD7 — PORTD bit 7 |
| Pino 35 | RE0 — PORTE bit 0 |
| Pino 36 | RE1 — PORTE bit 1 |
| Pino 37 | RE2 — PORTE bit 2 |
| Pino 38 | RE3 — PORTE bit 3 |
| Pino 39 | RE4 — PORTE bit 4 |
| Pino 40 | RE5 — PORTE bit 5 |
| Pino 41 | RE6 — PORTE bit 6 |
| Pino 42 | RE7 — PORTE bit 7 |
| Pino 43 | RF0/AN8 — PORTF bit 0 / ADC input 8 |
| Pino 44 | RF1/AN9 — PORTF bit 1 / ADC input 9 |
| Pino 45 | RF2/AN10 — PORTF bit 2 / ADC input 10 |
| Pino 46 | RF3/AN11 — PORTF bit 3 / ADC input 11 |
| Pino 47 | RF4/AN12 — PORTF bit 4 / ADC input 12 |
| Pino 48 | RF5/AN13 — PORTF bit 5 / ADC input 13 |
| Pino 49 | RF6/AN14 — PORTF bit 6 / ADC input 14 |
| Pino 50 | RF7/AN15 — PORTF bit 7 / ADC input 15 |
| Pino 51 | RG0 — PORTG bit 0 |
| Pino 52 | RG1 — PORTG bit 1 |
| Pino 53 | RG2 — PORTG bit 2 |
| Pino 54 | RG3 — PORTG bit 3 |
| Pino 55 | RG4 — PORTG bit 4 |
| Pino 56 | MCLR/VPP — Master clear reset / programming voltage |
| Pino 57 | VDD — Positive supply (5V) |
| Pino 58 | VSS — Ground |
| Pino 59 | SCK/SCL — SPI clock / I2C clock |
| Pino 60 | SDI/SDA — SPI data in / I2C data |
| Pino 61 | SDO — SPI data out |
| Pino 62 | CS/SS — SPI chip select |
| Pino 63 | TX/CK — USART transmit / clock |
| Pino 64 | RX/DT — USART receive / data |
| Pino 65 | CCP1/PWM1 — Capture/Compare/PWM output 1 |
| Pino 66 | CCP2/PWM2 — Capture/Compare/PWM output 2 |
| Pino 67 | T0CKI — Timer 0 clock input |
| Pino 68 | T1CKI — Timer 1 clock input |
| Pino 69 | AVDD — Analog supply (5V) |
| Pino 70 | AVSS — Analog ground |
| Pino 71 | VREF+ — ADC voltage reference positive |
| Pino 72 | VREF- — ADC voltage reference negative |
| Pino 73 | RH0 — PORTH bit 0 |
| Pino 74 | RH1 — PORTH bit 1 |
| Pino 75 | RH2 — PORTH bit 2 |
| Pino 76 | RH3 — PORTH bit 3 |
| Pino 77 | RI0 — PORTI bit 0 |
| Pino 78 | RI1 — PORTI bit 1 |
| Pino 79 | RI2 — PORTI bit 2 |
| Pino 80 | RI3 — PORTI bit 3 |
| Pino 81 | RJ0 — PORTJ bit 0 |
| Pino 82 | RJ1 — PORTJ bit 1 |
| Pino 83 | VDD — Positive supply (5V) |
| Pino 84 | VSS — Ground |
Aplicações típicas
PIC17C762-16E/L é adequado para 6 aplicaçãos: Industrial Control Panels, Motor Drive Front-End (PWM + ADC), Automotive Body & Chassis ECU, HVAC Climate Controllers, Legacy Embedded Systems Maintenance, Power Supply Monitoring & Sequencing.
Industrial Control Panels
PIC17C762-16E/L is well suited to industrial control panel applications thanks to its 16 MIPS throughput, 50 digital I/O lines, and extended -40 C to +125 C temperature rating. The integrated 16-channel 10-bit ADC handles analog sensor inputs (temperature, pressure, level), while PWM drives actuators and indicator lamps. Its OTP memory is acceptable because industrial panel firmware is typically frozen after qualification, and the 84-PLCC footprint is rugged for vibration-prone factory environments. Brown-out detect and watchdog timer ensure safe recovery from supply transients common on factory floors.
Recomendado
Motor Drive Front-End (PWM + ADC)
PIC17C762-16E/L serves as a motor drive front-end controller by combining 16 MIPS throughput with PWM outputs and 16-channel 10-bit ADC. The ADC samples phase currents and DC bus voltage at high rate, while PWM modules generate the timing reference for the external gate driver. Extended temperature grade supports under-hood or industrial cabinet mounting. OTP memory locks in the motor control algorithm permanently, eliminating firmware tampering risks in safety-critical deployments. Note that this part lacks dedicated motor-control PWMs, so consider dsPIC33 for new high-performance motor designs.
Recomendado
Automotive Body & Chassis ECU
PIC17C762-16E/L's extended -40 C to +125 C operating range and 84-PLCC rugged package make it suitable for legacy automotive body and chassis ECUs (window lift, seat controller, climate module). UART/SPI interfaces connect to vehicle network gateways, while the 10-bit ADC reads switch positions and sensor inputs. Because automotive ECUs require field-updatable firmware in modern programs, new designs should migrate to PIC18F8520 or dsPIC33 with CAN-FD support. OTP memory in PIC17C762 was historically acceptable for high-volume production runs where firmware stability is locked at the OEM.
Recomendado
HVAC Climate Controllers
PIC17C762-16E/L fits HVAC climate controllers that require multiple temperature sensor inputs (NTC thermistors), fan-speed PWM outputs, and serial communication to a central building management system. The 16-channel ADC reads thermistor bridges, while PWM drives variable-speed fans and damper actuators. UART/SPI enable Modbus or proprietary protocols to BMS gateways. The extended temperature grade ensures reliable operation in plant rooms and rooftop units where ambient can exceed 70 C. OTP memory is acceptable because HVAC controller firmware rarely changes once deployed.
Recomendado
Legacy Embedded Systems Maintenance
PIC17C762-16E/L is most commonly deployed today in maintenance and repair of legacy embedded systems originally designed around the PIC17C family in the late 1990s and 2000s. Obsolete industrial machines, scientific instruments, and specialty medical equipment often have 10-20 year service lives, and the PIC17C762-16E/L remains the only authorized part for those PCBs. Engineers maintaining these systems should stock critical PIC17C762-16E/L units and consider board-level redesign to flash-based PIC18F8520 when the legacy platform enters major overhaul. Octopart and Heisener track remaining factory and distributor inventory.
Recomendado
Power Supply Monitoring & Sequencing
PIC17C762-16E/L can monitor multi-rail power supply health by sampling output voltages through its 16-channel 10-bit ADC, sequencing power-up via GPIO-controlled MOSFETs, and logging faults over UART. The 16 MIPS throughput enables fast fault response (microsecond-scale) for crowbar or hot-swap protection. Brown-out detect and watchdog timer add safety layers against firmware lockup. While PIC17C762 is OTP, the controller is typically co-located with the PSU as a one-time-programmed housekeeping unit. Consider migrating to PIC18F or dsPIC33 for any new PSU design.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC17C762-16E/L — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC17C762-16/L | PIC17C762-16I/L | PIC17C756A-16I/PT | PIC17C756A-16E/PT | PIC17C762-16/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 84-PLCC (J-Lead) | 84-PLCC (J-Lead) - same | 84-PLCC (J-Lead) - same | 84-PLCC (J-Lead) - same | 84-PLCC (J-Lead) - same | 84-PLCC (J-Lead) - same |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Program Memory | 16 KB OTP | 16 KB OTP | 16 KB OTP | 16 KB OTP | 16 KB OTP | 16 KB OTP |
| Temperature Grade (E suffix) | Extended -40 C to +125 C | Commercial 0 C to +70 C | Industrial -40 C to +85 C | Industrial -40 C to +85 C | Extended -40 C to +125 C | Commercial 0 C to +70 C |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| ADC Channels | 16 x 10-bit | 16 x 10-bit | 16 x 10-bit | 12 x 10-bit | 12 x 10-bit | 16 x 10-bit |
| RAM | 678 bytes | 678 bytes | 678 bytes | 454 bytes | 454 bytes | 678 bytes |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
Principais diferenciais
- Extended -40 C to +125 C operating temperature range (vs PIC17C762-16/L)
- Highest RAM density in PIC17C762 family (678 bytes) (vs PIC17C756A-16I/PT)
- 16-channel 10-bit ADC vs 12-channel on PIC17C756A (vs PIC17C756A-16E/PT)
Notas de projeto
PIC17C762-16E/L operates from a single 4.5 V to 5.5 V supply on VDD/AVDD. Place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD/VSS pair (three pairs on this 84-PLCC) and a single 10 uF bulk tantalum or aluminum polymer cap at the board entry point. Analog supply AVDD should be filtered with a ferrite bead or 10 ohm resistor from VDD plus a dedicated 100 nF cap to AVSS to keep ADC reference noise below 1 LSB at 10-bit resolution.
PIC17C762-16E/L is OTP (One-Time-Programmable) - once the program memory is written, it cannot be erased or rewritten. This means every prototype unit must be fused carefully with verified firmware; a single bug bricks the device permanently. Plan firmware development on a flash-based sister part (PIC18F8520 or PIC17C762 flash variant) before committing production quantities, or stock pre-programmed OTP units from a programming house like Microchip's programming service.
Estimated: at maximum clock 16 MHz, VDD = 5.5 V, all I/O toggling at full CMOS load, typical core current is approximately 25 mA (~138 mW). The 84-PLCC package has a theta_JA around 35 C/W in still air, so junction-to-ambient rise is ~5 C - well within the -40 C to +125 C operating range. No external heatsink is required, but ensure at least 100 sq mm of unbroken ground copper under the package for thermal spreading.
Informações de conformidade
Compliance data not explicitly stated in verified web snippets. PIC17C762-16E/L was released before AEC-Q100 was widely applied to legacy 8-bit MCUs, and the part is marked obsolete by Microchip. Confirm compliance via Microchip's environmental compliance portal if required for new procurement.