PIC18F4539-E/ML - 8-bit 40MHz Motor Control MCU 24KB Flash | Microchip
N.º da peça: PIC18F4539-E/ML ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.12 | $8,12 |
| 10 | $7.41 | $74,10 |
| 100 | $6.05 | $605,00 |
| 500 | $5.22 | $2.610,00 |
| 1.000 | $4.48 | $4.480,00 |
PIC18F4539-E/ML Visão geral
An 8-bit PIC microcontroller is a Harvard-architecture CMOS device that combines a RISC-style instruction set with on-chip FLASH program memory, EEPROM data memory, and a rich set of peripherals including timers, ADC, PWM, and communication modules. Within the broader taxonomy, the PIC18F family is Microchip's high-performance 8-bit line (PIC -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor), designed for applications that need more code space, higher MIPS, and motor-control or DSP-like peripherals than the baseline PIC16F parts can deliver.
Key differentiating features include the dedicated motor control kernel tailored for single-phase induction motor drives, dual PWM outputs with programmable duty cycle and dead-band control, an enhanced USART, MSSP for SPI/I2C, and self-programming FLASH that enables field firmware updates. The 10-bit ADC with up to 8 input channels supports current/voltage/temperature sensing in inverter-style power stages.
Architecturally, the PIC18F4539 pairs an enhanced 16-bit instruction word with a hardware multiply engine, providing single-cycle multiplication and 16-bit arithmetic operations, which accelerates the math needed for sensorless motor control algorithms such as BEMF zero-crossing detection.
Typical applications include single-phase induction motor drives for fans, pumps, and white-goods compressors, as well as general-purpose 8-bit embedded control where a small QFN footprint, integrated peripherals, and the C-friendly PIC18 instruction set are preferred.
When designing with this device, ensure that the exposed thermal pad is soldered to a sufficiently large copper pour to meet the thermal and electrical ground requirements. The wide 2.0V to 5.5V supply range allows direct operation from regulated 3.3V or 5V rails, but decoupling capacitors must be placed within a few millimeters of VDD/AVDD/AVSS pins.
This page synthesizes verified distributor pricing, drop-in alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet.
Alternativas drop-in para PIC18F4539-E/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18F4539-E/ML (mesmo formato e footprint) — diferindo em ADC, Package, Mounting Type, CPU Speed, Communication.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18F4431-E/ML
✅ Drop-In✓ Em estoque
$5.1 / unidade
Ver ficha técnica →PIC18F4439-E/ML
✅ Drop-In✓ Em estoque
$5.25 / unidade
Ver ficha técnica →PIC18F4480-E/ML
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18F45K20-E/ML
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18F4458-E/ML
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18F4539-E/ML Classificações máximas e características elétricas
| Product Type | 8-bit Microcontroller (MCU) |
| Series | PIC18F |
| Program Memory Size | 24 KB (12K x 16) |
| RAM Size | 1408 bytes |
| EEPROM Size | 256 bytes |
| Frequência máxima de clock | 40 MHz |
| Tensão de alimentação de operação | 2.0 V to 5.5 V |
| Number of I/O Pins | 32 |
| ADC | 10-bit, 8 channels |
| PWM Modules | 2 (Motor Control PWM) |
| Communication Interfaces | UART, SPI, I2C (MSSP), Enhanced USART |
| Core Size | 8-bit |
| Core Processor | PIC |
| Instruction Set Architecture | RISC, 16-bit instruction word |
| Largura do barramento de dados | 8-bit |
| Connectivity | I2C, SPI, UART/USART |
| Oscillator Type | Internal / External |
| Encapsulamento | 44-pin VQFN with Exposed Pad (ML) |
| Tipo de montagem | Surface Mount |
| Operating Temperature Range (E suffix) | -40C to +125C (Extended) |
| Status RoHS | Compliant |
Configuração de pinos do PIC18F4539-E/ML
| Pino 1 | RA0/AN0 — Port A bit 0 / Analog input 0 |
| Pino 2 | RA1/AN1 — Port A bit 1 / Analog input 1 |
| Pino 3 | RA2/AN2/VREF- — Port A bit 2 / Analog input 2 / ADC VREF- |
| Pino 4 | RA3/AN3/VREF+ — Port A bit 3 / Analog input 3 / ADC VREF+ |
| Pino 5 | RA4/T0CKI — Port A bit 4 / Timer0 clock input |
| Pino 6 | RA5/AN4/SS — Port A bit 5 / Analog input 4 / SPI slave select |
| Pino 7 | RE0/RD/AN5 — Port E bit 0 / ICD data / Analog input 5 |
| Pino 8 | RE1/WR/AN6 — Port E bit 1 / ICD write / Analog input 6 |
| Pino 9 | RE2/CS/AN7 — Port E bit 2 / ICD chip select / Analog input 7 |
| Pino 10 | VDD — Digital supply voltage (2.0V to 5.5V) |
| Pino 11 | VSS — Digital ground |
| Pino 12 | OSC1/CLKIN — Crystal oscillator input / external clock |
| Pino 13 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Pino 14 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 oscillator output / Timer1 clock |
| Pino 15 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer1 oscillator input / CCP2 |
| Pino 16 | RC2/CCP1 — Port C bit 2 / Capture/Compare/PWM 1 |
| Pino 17 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| Pino 18 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| Pino 19 | RC5/SDO — Port C bit 5 / SPI data out |
| Pino 20 | RC6/TX/CK — Port C bit 6 / USART transmit / USART clock |
| Pino 21 | RC7/RX/DT — Port C bit 7 / USART receive / USART data |
| Pino 22 | RD0/PSP0 — Port D bit 0 / Parallel Slave Port bit 0 |
| Pino 23 | RD1/PSP1 — Port D bit 1 / Parallel Slave Port bit 1 |
| Pino 24 | RD2/PSP2 — Port D bit 2 / Parallel Slave Port bit 2 |
| Pino 25 | RD3/PSP3 — Port D bit 3 / Parallel Slave Port bit 3 |
| Pino 26 | RD4/PSP4 — Port D bit 4 / Parallel Slave Port bit 4 |
| Pino 27 | RD5/PSP5/PWM1 — Port D bit 5 / Parallel Slave Port bit 5 / PWM output 1 |
| Pino 28 | RD6/PSP6/PWM2 — Port D bit 6 / Parallel Slave Port bit 6 / PWM output 2 |
| Pino 29 | RD7/PSP7 — Port D bit 7 / Parallel Slave Port bit 7 |
| Pino 30 | RB0/INT0 — Port B bit 0 / External interrupt 0 |
| Pino 31 | RB1/INT1 — Port B bit 1 / External interrupt 1 |
| Pino 32 | RB2/INT2 — Port B bit 2 / External interrupt 2 |
| Pino 33 | RB3/CCP2 — Port B bit 3 / Capture/Compare/PWM 2 |
| Pino 34 | RB4 — Port B bit 4 |
| Pino 35 | RB5/PGM — Port B bit 5 / Low-voltage ICSP programming |
| Pino 36 | RB6/PGC — Port B bit 6 / ICSP clock |
| Pino 37 | RB7/PGD — Port B bit 7 / ICSP data |
| Pino 38 | AVDD — Analog supply voltage |
| Pino 39 | AVSS — Analog ground |
| Pino 40 | MCLR/VPP — Master clear / programming voltage |
| Pino 41 | RA6 — Port A bit 6 |
| Pino 42 | RA7 — Port A bit 7 |
| Pino 43 | RF0 — Port F bit 0 |
| Pino 44 | RF1 — Port F bit 1 |
Aplicações típicas
PIC18F4539-E/ML é adequado para 6 aplicaçãos: Single-Phase Induction Motor Control, HVAC Fan and Blower Drives, White Goods and Small Appliance Control, Industrial Sensor Signal Conditioning, Smart Home and IoT Edge Nodes, Educational and Hobby Robotics Platforms.
Single-Phase Induction Motor Control
The PIC18F4539-E/ML is purpose-built for single-phase induction motor drives used in fans, pumps, washing-machine drain pumps and refrigerator compressors. Its dedicated motor control kernel accelerates BEMF zero-crossing detection and the commutation state machine, while two PWMs drive the high-side and low-side power switches with programmable dead-band to prevent shoot-through. At 40 MHz the device delivers 10 MIPS of deterministic 8-bit compute, enough headroom for closed-loop speed regulation via integral-cycle or phase-angle control. The 32 I/O pins permit direct interfaces to zero-cross detectors, triac triggers, tachometer inputs, and user controls without external logic.
Recomendado
HVAC Fan and Blower Drives
Residential and commercial HVAC blowers benefit from the PIC18F4539-E/ML's compact 44-pin VQFN footprint and integrated motor control kernel. The 8-channel 10-bit ADC reads back-back EMF, current, board temperature and supply voltage to enable protective over-current and over-temperature shutdown. Its 2.0V to 5.5V supply range allows direct operation from 5V rails common in HVAC control boards, eliminating extra regulators. Two PWMs can drive the main winding and a capacitor-run winding for soft-start and variable-speed control, reducing acoustic signatures and improving efficiency versus fixed-speed designs.
Recomendado
White Goods and Small Appliance Control
Washing-machine pumps, dishwasher circulation pumps, range-hood blowers and small kitchen appliances commonly use a single-phase induction motor where the PIC18F4539-E/ML integrates the entire digital control loop. Its 256 bytes of EEPROM store calibration and lifetime counters without external NVRAM, while 24 KB of FLASH accommodates a full state machine plus diagnostic menus. UART, SPI and I2C (MSSP) allow connection to user-interface boards, sensors and main appliance controllers. The C-compiler-friendly architecture lowers firmware development cost in consumer volumes.
Recomendado
Industrial Sensor Signal Conditioning
Outside of motor control, the PIC18F4539-E/ML works well as a multi-channel sensor conditioner for industrial 4-20 mA loops, thermistor bridges, and pressure transducers. Its 8-channel 10-bit ADC provides sufficient resolution for many process-control channels, while the 32 I/O pins can drive indicator LEDs, relay coils and isolated digital I/O. Self-programming FLASH simplifies firmware updates during sensor recalibration, and the -40C to +125C industrial temperature grade suits factory-floor environments. UART or SPI output to a host PLC or display is straightforward through the MSSP and enhanced USART.
Recomendado
Smart Home and IoT Edge Nodes
Low-cost smart-home hubs, sensor nodes and small appliances can use the PIC18F4539-E/ML as an 8-bit edge controller that aggregates local sensors, drives relays and reports up the stack via UART or SPI to an ESP32-class Wi-Fi coprocessor. Its low cost, small 44-pin VQFN footprint and 32 I/O pins make it attractive as a glue controller. Self-programming FLASH supports Over-The-Air firmware updates relayed from the host. The motor control kernel is harmless overhead if motor channels are unused, since it consumes no power when inactive.
Recomendado
Educational and Hobby Robotics Platforms
Robotics educators and hobbyists favor the PIC18F4539-E/ML because its exposed-pad VQFN is easy to integrate on breakout boards, the 40 MHz speed supports PID control loops at kilohertz rates, and the two PWMs can drive a small DC motor or servo pair directly through H-bridges. The 10-bit ADC reads battery voltage and current shunts. MPLAB X IDE with the free XC8 compiler provides a C-friendly development environment, and the integrated ICD allows single-step debugging with a low-cost PICkit programmer.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18F4539-E/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18F4431-E/ML | PIC18F4439-E/ML | PIC18F4480-E/ML | PIC18F45K20-E/ML | PIC18F4458-E/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-VQFN Exposed Pad (ML) | 44-VQFN Exposed Pad (ML) - same | 44-VQFN Exposed Pad (ML) - same | 44-VQFN Exposed Pad (ML) - same | 44-VQFN Exposed Pad (ML) - same | 44-VQFN Exposed Pad (ML) - same |
| Program FLASH Memory | 24 KB | 16 KB | 24 KB | 16 KB | 32 KB | 24 KB |
| RAM | 1408 bytes | 768 bytes | 1408 bytes | 768 bytes | 1536 bytes | 1536 bytes |
| EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 64 MHz | 48 MHz |
| Operating Voltage | 2.0V to 5.5V | 2.0V to 5.5V | 2.0V to 5.5V | 2.0V to 5.5V | 1.8V to 3.6V | 2.0V to 5.5V |
| Motor Control PWM | 2 PWMs (single-phase kernel) | 2 PWMs (single-phase kernel) | 2 PWMs (single-phase kernel) | Enhanced motor PWM | Enhanced motor PWM | Enhanced PWM + USB |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Active | Active |
Principais diferenciais
- Dedicated single-phase induction motor control kernel (vs PIC18F45K20-E/ML)
- Larger FLASH than PIC18F4431 while keeping 1408 B RAM (vs PIC18F4431-E/ML)
- Extended industrial temperature grade with exposed-pad VQFN (vs PIC18F4539-I/ML)
Notas de projeto
The 44-pin VQFN package relies on the exposed thermal pad (EP) for heat removal. Solder the EP directly to a continuous ground copper pour of at least 1 square inch (645 mm^2). Without adequate thermal copper, internal junction temperatures can rise beyond the 125C industrial limit during sustained motor-control PWM switching. Use thermal vias under the EP (typically 4-9 vias) to conduct heat into inner ground planes.
Place 100 nF decoupling capacitors as close as possible to every VDD/VSS pin pair, plus a bulk 10 uF tantalum or ceramic capacitor near the supply entry point. The analog AVDD/AVSS pair requires a separate 100 nF decoupling cap and a small RC or ferrite-bead filter from VDD to suppress ADC noise during motor switching events. Keep analog traces (AN0-AN7) away from the PWM and switching nodes to prevent digital noise coupling into current/voltage measurements.
Do not assume any PIC18F with 44 pins is firmware-compatible with the PIC18F4539. The PIC18F4431, PIC18F4439 and PIC18F4480 share the same motor control kernel; the PIC18F45K20 uses an enhanced motor PWM block, and the PIC18F4458 adds USB plus a different peripheral mix - both require firmware migration. Also, do not bypass the MCLR pin in production: tie it to VDD through a 10 kohm resistor and add a 100 nF cap to ground for a clean reset.
The ICSP pins PGC/PGD are multiplexed onto RB6/RB7. If the application uses RB6/RB7 as general-purpose I/O, add 4.7 kohm series resistors in series with PGC/PGD to prevent programming-tool contention damaging the application circuitry. For BEMF zero-cross detection on single-phase induction motors, add a 10-100 kohm impedance-matching network on the ANx input to attenuate switching-noise spikes below the ADC full scale.
Informações de conformidade
RoHS compliant per Microchip product page. AEC-Q100 qualification status not listed in the verified web data. Lifecycle is obsolete per Microchip product page (2026-09-27).
