PIC18F4685-I/ML - 96KB Flash 8-bit MCU w/ECAN, 44-QFN | Microchip
N.º da peça: PIC18F4685-I/ML ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.2 | $11,20 |
| 10 | $10.05 | $100,50 |
| 100 | $8.62 | $862,00 |
| 500 | $7.55 | $3.775,00 |
| 1.000 | $6.48 | $6.480,00 |
PIC18F4685-I/ML Visão geral
Key features include 1 KB of EEPROM data memory, nanoWatt Technology power management with multiple idle and sleep modes, an enhanced USART, MSSP (SPI/I2C) peripheral, two CCP/ECCP modules for PWM and capture/compare, and a 16-bit timer/counter. The integrated ECAN controller is compliant with CAN 2.0B active specification and supports both standard and extended identifiers with maskable filters, allowing reliable in-vehicle networking at bit rates up to 1 Mbit/s. The device is part of the PIC18F4685 family which includes the PIC18F2682/2685/4682/4685 variants in 28/40/44-pin packages.
The architecture uses an 8-bit data path with a 16-bit instruction word and a modified Harvard bus, providing linear memory addressing for both program and data. The enhanced Flash supports self-programming under software control, enabling in-field firmware updates and bootloader-style workflows. Hardware stack and interrupt controller support priority-based context handling, with up to 20 interrupt sources and two priority levels, making this device suitable for real-time control tasks.
Typical applications include automotive body and chassis ECUs (CAN nodes for body control, HVAC, instrument clusters), industrial CAN-based sensor networks, motor control loops where ECCP PWM drives half-bridges, sensor conditioning with on-chip 10-bit ADC, and consumer appliances requiring robust wired networking. The wide operating temperature range (-40C to +85C for the -I industrial grade) plus ECAN and nanoWatt features align it with both automotive passenger-compartment and industrial control deployments.
Designers should use MPLAB X IDE with the MPLAB XC8 compiler for firmware development and the PICkit 5 in-circuit debugger for programming and debugging. The QFN-44 package requires careful PCB layout with thermal vias under the exposed pad to manage the 5 V/40 MHz power dissipation envelope. The 96 KB Flash also enables large lookup-table and bootloader strategies that smaller PIC18 devices cannot host.
This page synthesizes distributor pricing, drop-in Microchip alternative MPNs, and practical design considerations not found in the manufacturer datasheet alone, including parametric proximity analysis versus PIC18F4682 and PIC18F4585 variants within the same 44-pin QFN footprint.
Alternativas drop-in para PIC18F4685-I/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18F4685-I/ML (mesmo formato e footprint) — diferindo em Package, Timers, Operating Temperature, EEPROM, MSL Level.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18F4682-I/ML
✅ Drop-In✓ Em estoque
$5.92 / unidade
Ver ficha técnica →PIC18F4585-I/ML
✅ Drop-In✓ Em estoque
$5.53 / unidade
Ver ficha técnica →PIC18F4680-I/P
✅ Drop-In✓ Em estoque
$5.78 / unidade
Ver ficha técnica →PIC18F4620-I/ML
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18F4480-I/ML
✅ Drop-In✓ Em estoque
$4.89 / unidade
Ver ficha técnica →PIC18F4685-I/ML Classificações máximas e características elétricas
| Family | PIC18F |
| Core | 8-bit PIC RISC |
| Program Memory Type | Enhanced Flash |
| Program Memory Size | 96 KB |
| Data RAM Size | 3328 bytes |
| Data EEPROM Size | 1024 bytes |
| Maximum CPU Frequency | 40 MHz |
| MIPS | 10 MIPS |
| Operating Voltage Range | 2.0 V to 5.5 V |
| Faixa de temperatura de operação | -40C to +85C (Industrial grade, I suffix) |
| ADC | 10-bit, up to 11 channels |
| CAN | ECAN (Enhanced CAN 2.0B active) on-chip |
| PWM Channels | ECCP/CCP |
| Timers | 16-bit and 8-bit Timer/Counter modules |
| UART | Enhanced USART (EUSART) |
| I2C/SPI | MSSP (SPI / I2C) peripheral |
| Encapsulamento | 44-pin QFN (ML) with exposed thermal pad |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do PIC18F4685-I/ML
| Pino 1 | OSC1/CLKI — Oscillator input / external clock input |
| Pino 2 | OSC2/CLKO — Oscillator output / clock output |
| Pino 3 | MCLR — Master Clear (reset) input, active-low |
| Pino 4 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Pino 5 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Pino 6 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 / ADC VREF- |
| Pino 7 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / ADC VREF+ |
| Pino 8 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pino 9 | RA5/AN4/SS — PORTA bit 5 / analog input 4 / SPI slave select |
| Pino 10 | VSS — Ground |
| Pino 11 | VDD — Positive supply (2.0-5.5V) |
| Pino 12 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| Pino 13 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Pino 14 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Pino 15 | RB3/CCP2 — PORTB bit 3 / CCP2 PWM/capture |
| Pino 16 | RB4 — PORTB bit 4 |
| Pino 17 | RB5/PGM — PORTB bit 5 / ICSP programming low-voltage |
| Pino 18 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pino 19 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pino 20 | VSS — Ground |
| Pino 21 | VDD — Positive supply (2.0-5.5V) |
| Pino 22 | RC0/T1OSO — PORTC bit 0 / Timer1 oscillator output |
| Pino 23 | RC1/T1OSI — PORTC bit 1 / Timer1 oscillator input |
| Pino 24 | RC2/CCP1 — PORTC bit 2 / ECCP1 PWM/capture |
| Pino 25 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Pino 26 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Pino 27 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pino 28 | RC6/TX/CK — PORTC bit 6 / EUSART TX / clock |
| Pino 29 | RC7/RX/DT — PORTC bit 7 / EUSART RX / data |
| Pino 30 | RD0 — PORTD bit 0 |
| Pino 31 | RD1 — PORTD bit 1 |
| Pino 32 | RD2 — PORTD bit 2 |
| Pino 33 | RD3 — PORTD bit 3 |
| Pino 34 | RD4/ECANRX — PORTD bit 4 / ECAN receive pin |
| Pino 35 | RD5/ECANTX — PORTD bit 5 / ECAN transmit pin |
| Pino 36 | RD6 — PORTD bit 6 |
| Pino 37 | RD7 — PORTD bit 7 |
| Pino 38 | VSS — Ground |
| Pino 39 | VDD — Positive supply (2.0-5.5V) |
| Pino 40 | RE0/RD — PORTE bit 0 / parallel port read |
| Pino 41 | RE1/WR — PORTE bit 1 / parallel port write |
| Pino 42 | RE2/CS — PORTE bit 2 / parallel port chip select |
| Pino 43 | AVDD — Analog supply |
| Pino 44 | AVSS — Analog ground |
Aplicações típicas
PIC18F4685-I/ML é adequado para 6 aplicaçãos: Automotive CAN Body Control Module, Industrial CAN Sensor Network Node, BLDC Motor Control with ECAN Feedback, HVAC Climate Control Unit, Instrument Cluster CAN Display Driver, Building Automation / Smart Sensor Hub.
Automotive CAN Body Control Module
The PIC18F4685-I/ML is well suited for automotive body-control ECUs because its ECAN module is compliant with Bosch CAN 2.0B active and supports standard 11-bit plus extended 29-bit identifiers at bit rates up to 1 Mbit/s. With 96 KB Flash, designers can host the entire body-control application (HVAC control, lighting sequencer, door lock state machine) plus a bootloader for service updates over CAN. The 10-bit ADC handles analog sensor inputs (temperature, position) while ECCP PWM drives small actuators. The 44-pin QFN (ML) package offers a compact footprint under 10x10 mm and the -I temperature grade covers the -40C to +85C passenger-compartment environment.
Recomendado
Industrial CAN Sensor Network Node
For industrial sensor networks using CANopen or DeviceNet, the PIC18F4685-I/ML acts as a smart sensor node with on-chip ECAN handling bus arbitration and acceptance filtering so the CPU offloads message routing. The 10-bit ADC scans up to 11 analog inputs (temperature, pressure, flow) and the 16-bit timer accurately timestamps CAN messages. nanoWatt Technology enables sleep currents below 1 uA in battery-backed field nodes. Industrial EMC and surge immunity are improved by the wide 2.0-5.5 V supply tolerance, accepting 24 V bus-derived rails with a simple LDO dropper. The 3328-byte RAM accommodates CANopen object dictionary fragments and run-time diagnostics.
Recomendado
BLDC Motor Control with ECAN Feedback
The PIC18F4685-I/ML's ECCP (Enhanced Capture/Compare/PWM) module drives a 3-phase BLDC or PMSM motor with hardware fault shutdown and programmable dead-band control. The 10-bit ADC samples back-EMF or phase current through external shunt amplifiers while the 16-bit timer triggers commutation events deterministically. ECAN streams rotor speed, torque, and fault status back to a central controller, enabling distributed motor clusters in industrial robots and CNC machines. The 40 MHz / 10 MIPS core performs field-oriented control loops at switching frequencies up to 20 kHz. The -40C to +85C industrial range supports motor compartment installations.
Recomendado
HVAC Climate Control Unit
The PIC18F4685-I/ML drives HVAC climate-control panels where multiple temperature sensors (NTC thermistors, RTDs), humidity sensors, and user-interface keypads feed the 10-bit ADC. The 96 KB Flash holds full PID control algorithms for compressor, blower, and damper actuators while ECAN communicates with the vehicle's body controller or with the building's HVAC bus. PWM channels regulate blower speed and proportional valves, and the nanoWatt Technology idle modes drop current draw below 5 uA in standby. The 44-pin QFN (ML) keeps the PCB under 25x25 mm, leaving room for a compact in-dash or wall-mount enclosure.
Recomendado
Instrument Cluster CAN Display Driver
In automotive and industrial dashboards, the PIC18F4685-I/ML serves as a CAN-attached display controller that interprets vehicle CAN frames (RPM, speed, fuel, temperature) and drives a graphic LCD or segment display. With 96 KB Flash and 3328 bytes RAM, it can host full custom fonts, warning icons, and CANopen-style network management. The 10-bit ADC reads the cluster's photodiode for automatic dimming, and PWM channels drive LED backlight brightness. ECAN hardware filtering reduces CPU load by discarding non-relevant frames, freeing cycles for display refresh routines.
Recomendado
Building Automation / Smart Sensor Hub
In building automation, the PIC18F4685-I/ML aggregates multiple sensor inputs (PIR motion, CO2, light, temperature) and reports aggregated telemetry over a CAN bus using ECAN's maskable filters to handle bus traffic efficiently. The 10-bit ADC digitizes analog sensors, MSSP runs I2C sensors, and ECCP drives relay or TRIAC outputs for lighting control. The nanoWatt Technology sleep modes extend battery life in wireless gateway nodes. The wide 2.0-5.5 V supply range tolerates Power-over-Ethernet derived rails after a small LDO. With 96 KB Flash, the device can host BACnet or KNX-style application profiles.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18F4685-I/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18F4682-I/ML | PIC18F4585-I/ML | PIC18F4620-I/ML | PIC18F4480-I/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin QFN (ML) | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same |
| Flash Program Memory | 96 KB | 80 KB (-17%) | 48 KB (-50%) | 64 KB (-33%) | 16 KB (-83%) |
| Data RAM | 3328 bytes | 3328 bytes | 3328 bytes | 3986 bytes | 768 bytes (-77%) |
| CAN Module | ECAN (Enhanced) | ECAN (Enhanced) | Legacy CAN (no ECAN filters) | Legacy CAN | ECAN (Enhanced) |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| ADC Resolution | 10-bit, 11 channels | 10-bit, 11 channels | 10-bit, 11 channels | 10-bit, 8 channels | 10-bit, 8 channels |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
Principais diferenciais
- Largest Flash in PIC18F4685/4682 family at 96 KB (vs PIC18F4682-I/ML)
- ECAN with hardware acceptance filtering vs legacy CAN (vs PIC18F4585-I/ML)
- Industrial temperature range -40C to +85C with ECAN (vs PIC18F4620-I/ML)
- Lower unit cost than PIC18F4585 for higher-memory CAN nodes (vs PIC18F4480-I/ML)
Notas de projeto
The 44-pin QFN (ML) package has an exposed thermal pad on the underside that must be soldered to a PCB pad for both thermal dissipation and electrical ground connection. Per the Microchip 39626e datasheet, fabricate a thermal-pad copper pour of at least 1 square inch with an array of 0.3 mm thermal vias connecting the top pad to the bottom ground plane. Inadequate exposed-pad soldering raises junction-to-ambient thermal resistance and can cause thermal-shutdown events at high CPU activity. Keep decoupling capacitors (0.1 uF ceramic) within 3 mm of every VDD pin.
The PIC18F4685-I/ML supports a wide 2.0-5.5 V supply, but ADC accuracy and ECAN bus performance depend on a clean, well-regulated rail. Use a 10 uF bulk capacitor plus a 0.1 uF ceramic near each VDD/AVDD pin. For noise-sensitive designs, route VDD and AVDD through ferrite beads to isolate analog from digital noise. The nanoWatt Technology power-management modes (Sleep, Idle, Low-Voltage Sleep) drop quiescent current below 1 uA; configure the appropriate mode by clearing/setting the IDLEN and SCS0/1 bits in the OSCCON register.
ECAN bus signals (RD4/ECANRX, RD5/ECANTX) require a 5 V tolerant CAN transceiver such as the MCP2551 or TCAN334G between the MCU and the bus. Place the transceiver within 20 mm of the MCU pins to keep stub length below 1/10 of the CAN bit time. Add a 120 ohm termination resistor at each end of the bus, not at every node, and use shielded twisted-pair cable for industrial EMC compliance. For high-speed 1 Mbit/s CAN, ensure the oscillator accuracy is within +/-0.5% so the CAN bit timing is reliable.
Do not configure the ICD/ICSP pins (RB5/PGM, RB6/PGC, RB7/PGD) as outputs when designing for in-circuit programming - many designs lock themselves out of reprogramming by driving these pins low in the application. The MCLR pin must be pulled high through a 10 kohm resistor with a 100 nF decoupling cap to ground for clean reset behavior. Avoid leaving ADC channels floating - tie unused analog inputs to either VSS or VDD to prevent injected-current leakage. Finally, never write to Flash on a Brown-Out Detect event without verifying the BOR voltage threshold is set appropriately.
For mixed-signal designs using the internal ADC, separate the analog ground (AVSS) and digital ground (VSS) planes on the PCB and join them at a single point under the MCU exposed pad. Route the ADC reference voltage (VREF+/VREF-) traces as wide, short pairs to minimize input-referred noise. Place the 40 MHz crystal or resonator within 5 mm of the OSC1/OSC2 pins with guard traces around it to avoid coupling digital noise into the oscillator. Use Microchip's MPLAB X IDE with the XC8 compiler and PICkit 5 debugger for development; configure configuration bits in the IDE rather than in code to avoid boot failures.
Informações de conformidade
RoHS compliant per Microchip product page. Industrial-grade -I suffix (not AEC-Q100 qualified); for automotive safety-critical ECUs, migrate to AEC-Q100 qualified PIC18F K-series or dsPIC33 family.
