PIC18F87J90-I/PT - 128KB Flash LCD MCU 80-TQFP | Microchip
N.º da peça: PIC18F87J90-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $9.65 | $9,65 |
| 10 | $8.95 | $89,50 |
| 100 | $7.85 | $785,00 |
| 500 | $6.95 | $3.475,00 |
| 1.000 | $6.1 | $6.100,00 |
PIC18F87J90-I/PT Visão geral
An 8-bit microcontroller (MCU) is a self-contained computer-on-a-chip that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals onto a single die; the PIC18F family is Microchip's high-performance tier targeting applications that need large code space, low power, and rich I/O. This device sits in the LCD-driver sub-family, adding dedicated segment-drive waveforms to drive character and segment glass directly, eliminating external LCD controller ICs in metering and appliance products.
The MCU integrates up-to-12 MIPS performance, an internal 31 kHz to 8 MHz oscillator selectable via software, a 10-bit ADC with up to 12 channels, multiple USART/CCP/SPI/I2C peripherals, and nanoWatt power-management modes for battery-operated designs. Wide 2.0-3.6V operation (the J-series 3V rail) supports single-cell Li-ion or two-AA batteries with low quiescent current under sleep.
The PIC18F87J90 architecture uses a 16-bit instruction word optimized for C compilers, with separate instruction and data buses enabling single-cycle execution; the segment-LCD module supports up to 192 segments with software-controllable contrast, charge-pump, and blinking functions.
Typical applications include handheld meters, thermostats, home security panels, portable medical devices, utility metering, and display-driven consumer appliances that combine computation with low-power segmented LCD readouts.
When designing with this part, allocate I/O pins carefully: 70 user I/O + dedicated LCD segments share the 80-pin TQFP. Use Microchip's MPLAB X IDE + XC8 compiler + MPLAB Snap (ICSP) for development and in-circuit debugging.
This page synthesizes distributor pricing, drop-in alternatives drawn from the same Microchip PIC18F8xJ90/8xJ60 family, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para PIC18F87J90-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18F87J90-I/PT (mesmo formato e footprint) — diferindo em Package, Operating Temperature, ADC, Core Architecture, I/O Pins.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18F86J90-I/PT
✅ Drop-In✓ Em estoque
$2.86 / unidade
Ver ficha técnica →PIC18F85J90-I/PT
✅ Drop-In✓ Em estoque
$4.5 / unidade
Ver ficha técnica →PIC18F87J72-I/PT
✅ Drop-In✓ Em estoque
$4.78 / unidade
Ver ficha técnica →PIC18F86J65-I/PT
✅ Drop-In✓ Em estoque
$5.8 / unidade
Ver ficha técnica →PIC18F87J10-I/PT
✅ Drop-In✓ Em estoque
$5.1 / unidade
Ver ficha técnica →PIC18F87J90-I/PT Classificações máximas e características elétricas
| Core Architecture | PIC18 (8-bit C-optimized RISC) |
| Program Memory (Flash) | 128 KB (64K x 16) |
| Data Memory (RAM) | 4 KB |
| Maximum CPU Speed | 48 MHz oscillator / 12 MIPS |
| Supply Voltage Range | 2.0 V to 3.6 V |
| I/O Pins | 70 |
| ADC | 10-bit, multiple channels |
| LCD Driver | Integrated segment LCD controller (up to 192 segments) |
| Communication | USART, SPI, I2C (MSSP), EUSART |
| Internal Oscillator | 31 kHz - 8 MHz selectable |
| Temperatura de operação | -40C to +85C (industrial) |
| Encapsulamento | 80-pin TQFP (12 x 12 mm, 1 mm height) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Nível MSL | 3 (168 hours) |
| nanoWatt Power Management | Yes (deep sleep / idle / Run modes) |
Configuração de pinos do PIC18F87J90-I/PT
| Pino 1 | RB0/INT0/SEG0 — I/O port RB0 / external interrupt / LCD segment 0 |
| Pino 2 | RB1/INT1/SEG1 — I/O port RB1 / external interrupt / LCD segment 1 |
| Pino 3 | RB2/INT2/SEG2 — I/O port RB2 / external interrupt / LCD segment 2 |
| Pino 4 | RB3/INT3/SEG3 — I/O port RB3 / external interrupt / LCD segment 3 |
| Pino 5 | RB4/SEG4 — I/O port RB4 / LCD segment 4 |
| Pino 6 | RB5/SEG5 — I/O port RB5 / LCD segment 5 |
| Pino 7 | RB6/ICSPCLK/SEG6 — I/O port RB6 / ICSP clock / LCD segment 6 |
| Pino 8 | RB7/ICSPDAT/SEG7 — I/O port RB7 / ICSP data / LCD segment 7 |
| Pino 9 | VDD — Positive supply (2.0V - 3.6V) |
| Pino 10 | VSS — Ground reference |
| Pino 11 | RC0/SOSCO — I/O port RC0 / secondary oscillator output |
| Pino 12 | RC1/SOSCI — I/O port RC1 / secondary oscillator input |
| Pino 13 | RC2/CCP1 — I/O port RC2 / Capture/Compare/PWM 1 |
| Pino 14 | RC3/SCL — I/O port RC3 / I2C clock |
| Pino 15 | RC4/SDA — I/O port RC4 / I2C data |
| Pino 16 | RC5/SEG8 — I/O port RC5 / LCD segment 8 |
| Pino 17 | RC6/SEG9 — I/O port RC6 / LCD segment 9 |
| Pino 18 | RC7/SEG10 — I/O port RC7 / LCD segment 10 |
| Pino 19 | RD0/SEG11 — I/O port RD0 / LCD segment 11 |
| Pino 20 | RD1/SEG12 — I/O port RD1 / LCD segment 12 |
| Pino 21 | RD2/SEG13 — I/O port RD2 / LCD segment 13 |
| Pino 22 | RD3/SEG14 — I/O port RD3 / LCD segment 14 |
| Pino 23 | RD4/SEG15 — I/O port RD4 / LCD segment 15 |
| Pino 24 | RD5/SEG16 — I/O port RD5 / LCD segment 16 |
| Pino 25 | RD6/SEG17 — I/O port RD6 / LCD segment 17 |
| Pino 26 | RD7/SEG18 — I/O port RD7 / LCD segment 18 |
| Pino 27 | VSS — Ground reference |
| Pino 28 | VDD — Positive supply (2.0V - 3.6V) |
| Pino 29 | RE0/SEG19 — I/O port RE0 / LCD segment 19 |
| Pino 30 | RE1/SEG20 — I/O port RE1 / LCD segment 20 |
| Pino 31 | RE2/SEG21 — I/O port RE2 / LCD segment 21 |
| Pino 32 | RE3/SEG22 — I/O port RE3 / LCD segment 22 |
| Pino 33 | RE4/SEG23 — I/O port RE4 / LCD segment 23 |
| Pino 34 | RE5/SEG24 — I/O port RE5 / LCD segment 24 |
| Pino 35 | RE6/SEG25 — I/O port RE6 / LCD segment 25 |
| Pino 36 | RE7/SEG26 — I/O port RE7 / LCD segment 26 |
| Pino 37 | RF0/SEG27 — I/O port RF0 / LCD segment 27 |
| Pino 38 | RF1/SEG28 — I/O port RF1 / LCD segment 28 |
| Pino 39 | RF2/SEG29 — I/O port RF2 / LCD segment 29 |
| Pino 40 | RF3/SEG30 — I/O port RF3 / LCD segment 30 |
| Pino 41 | RF4/SEG31 — I/O port RF4 / LCD segment 31 |
| Pino 42 | RF5/SEG32/COM0 — I/O port RF5 / LCD segment 32 / Common 0 |
| Pino 43 | RF6/SEG33/COM1 — I/O port RF6 / LCD segment 33 / Common 1 |
| Pino 44 | RF7/SEG34/COM2 — I/O port RF7 / LCD segment 34 / Common 2 |
| Pino 45 | RG0/SEG35/COM3 — I/O port RG0 / LCD segment 35 / Common 3 |
| Pino 46 | RG1/SEG36 — I/O port RG1 / LCD segment 36 |
| Pino 47 | RG2/SEG37 — I/O port RG2 / LCD segment 37 |
| Pino 48 | RG3/SEG38 — I/O port RG3 / LCD segment 38 |
| Pino 49 | RG4/SEG39 — I/O port RG4 / LCD segment 39 |
| Pino 50 | MCLR/RE5 — Master clear / reset (active-low) |
| Pino 51 | RH0/SEG40 — I/O port RH0 / LCD segment 40 |
| Pino 52 | RH1/SEG41 — I/O port RH1 / LCD segment 41 |
| Pino 53 | RH2/SEG42 — I/O port RH2 / LCD segment 42 |
| Pino 54 | RH3/SEG43 — I/O port RH3 / LCD segment 43 |
| Pino 55 | RH4/SEG44 — I/O port RH4 / LCD segment 44 |
| Pino 56 | RH5/SEG45 — I/O port RH5 / LCD segment 45 |
| Pino 57 | RH6/SEG46 — I/O port RH6 / LCD segment 46 |
| Pino 58 | RH7/SEG47 — I/O port RH7 / LCD segment 47 |
| Pino 59 | RJ0/SEG48 — I/O port RJ0 / LCD segment 48 |
| Pino 60 | RJ1/SEG49 — I/O port RJ1 / LCD segment 49 |
| Pino 61 | RJ2/SEG50 — I/O port RJ2 / LCD segment 50 |
| Pino 62 | RJ3/SEG51 — I/O port RJ3 / LCD segment 51 |
| Pino 63 | RJ4/SEG52 — I/O port RJ4 / LCD segment 52 |
| Pino 64 | VSS — Ground reference |
| Pino 65 | VDD — Positive supply (2.0V - 3.6V) |
| Pino 66 | RJ5/SEG53 — I/O port RJ5 / LCD segment 53 |
| Pino 67 | RJ6/SEG54 — I/O port RJ6 / LCD segment 54 |
| Pino 68 | RJ7/SEG55 — I/O port RJ7 / LCD segment 55 |
| Pino 69 | RK0/SEG56 — I/O port RK0 / LCD segment 56 |
| Pino 70 | RK1/SEG57 — I/O port RK1 / LCD segment 57 |
| Pino 71 | RK2/SEG58 — I/O port RK2 / LCD segment 58 |
| Pino 72 | RK3/SEG59 — I/O port RK3 / LCD segment 59 |
| Pino 73 | RK4/AN16 — I/O port RK4 / analog input 16 |
| Pino 74 | RK5/AN17 — I/O port RK5 / analog input 17 |
| Pino 75 | RK6/AN18 — I/O port RK6 / analog input 18 |
| Pino 76 | RK7/AN19 — I/O port RK7 / analog input 19 |
| Pino 77 | RA0/AN0 — I/O port RA0 / analog input 0 |
| Pino 78 | RA1/AN1 — I/O port RA1 / analog input 1 |
| Pino 79 | RA2/AN2 — I/O port RA2 / analog input 2 |
| Pino 80 | RA3/AN3 — I/O port RA3 / analog input 3 |
Aplicações típicas
PIC18F87J90-I/PT é adequado para 6 aplicaçãos: Handheld Utility Meters, Programmable Thermostats, Home Security Panels, Portable Medical Devices, Industrial Counters and Timers, Appliance User Interfaces.
Handheld Utility Meters
The PIC18F87J90-I/PT fits handheld electricity/water/gas meters because its integrated segment LCD driver eliminates external controller ICs and drives up to 192 segments directly. The 128 KB Flash stores complex tariff tables and history logs, while the 4 KB RAM buffers accumulated measurements. Its 2.0V minimum supply enables direct operation from two AA cells and its nanoWatt sleep modes reach sub-uA idle current between meter reads. Place the MCU with its 31 kHz internal oscillator in sleep between measurements to extend battery life to >10 years. The 12 MIPS speed handles kHz-rate sensor sampling without dropping ADC events.
Recomendado
Programmable Thermostats
The PIC18F87J90-I/PT suits programmable thermostats with 7-day scheduling and on-glass segment displays because the integrated LCD driver reduces BOM cost and PCB area. The 12 MIPS throughput runs the user interface and PID loop in a single die, while the RTC with external 32 kHz crystal keeps wall-clock time accurately across temperature swings. The 70 user I/O pins provide ample headroom for keypad scanning, NTC thermistor inputs via the 10-bit ADC, and triac drive for HVAC relay control. Its extended temperature grade (-40C to +85C) operates reliably on the wall plate in unconditioned spaces.
Recomendado
Home Security Panels
The PIC18F87J90-I/PT anchors home-security keypads and panels needing LCD readout of zone status, alarm history, and user prompts. Its 128 KB Flash holds nested menu state machines and event-log code, while 4 KB RAM buffers display strings for the segment-LCD character set. The EUSART interfaces to RF modules like MRF89XA while MSSP (SPI) drives external EEPROM for encrypted credential storage. Integrated nanoWatt deep-sleep allows the keypad to idle on battery backup during AC power loss without flattening it within 24 hours.
Recomendado
Portable Medical Devices
The PIC18F87J90-I/PT is a fit for battery-powered medical peripherals such as glucose meters, pulse oximeters, and infusion-pump keypads where low noise, low power, and segmented display are essential. The integrated 10-bit ADC reads analog front-ends while the segment LCD drives the user-visible parameter readout. C-optimized RISC architecture (12 MIPS) lets the same MCU run measurement algorithms, keypad handling, and display refresh without a separate display IC. Its 2.0V minimum VDD enables direct lithium-battery operation throughout the entire discharge curve.
Recomendado
Industrial Counters and Timers
The PIC18F87J90-I/PT drives industrial counters, production-line timers, and scoreboard displays because it combines a high-pin-count MCU with a robust segment LCD driver and EUSART/MSSP comms. The 80-TQFP allows direct wiring to 7-segment digit arrays through BCD latches, while the EUSART talks to PLCs or remote displays via RS-485 transceivers. 128 KB Flash absorbs ladder-logic and recipe-storage code; 4 KB RAM holds the current run-time state. Hardware CCP modules deliver precise PWM-driven relay sequencing for batching operations.
Recomendado
Appliance User Interfaces
The PIC18F87J90-I/PT is used as the user-interface MCU in washing machines, ovens, and microwave displays where a character LCD plus keypad combine with sensor and motor control. Up to 70 GPIO drive the segmented glass plus button matrix and rotary encoder; a hardware CCP implements the buzzer tone; the ADC reads NTC temperature probes. 12 MIPS C performance keeps button debounce and display refresh well below interrupt load. nanoWatt modes save energy when the appliance is in standby.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18F87J90-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18F86J90-I/PT | PIC18F85J90-I/PT | PIC18F87J72-I/PT | PIC18F86J65-I/PT | PIC18F87J10-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (12x12) | 80-pin TQFP (12x12) - same | 80-pin TQFP (12x12) - same | 80-pin TQFP (12x12) - same | 80-pin TQFP (12x12) - same | 80-pin TQFP (12x12) - same |
| Flash Memory | 128 KB | 96 KB | 64 KB | 128 KB | 96 KB | 128 KB |
| RAM | 4 KB | 3.9 KB | 3.9 KB | 4 KB | 3.9 KB | 4 KB |
| Max CPU Speed | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS | 48 MHz / 12 MIPS | 41.7 MHz / 10 MIPS | 48 MHz / 12 MIPS |
| Supply Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Segment LCD Driver | Yes (up to 192 segments) | Yes (up to 192 segments) | Yes (up to 192 segments) | Yes (up to 192 segments) | Yes (up to 192 segments) | No LCD driver |
| Integrated Ethernet MAC | No | No | No | No | Yes (Ethernet MAC) | No |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 12-bit | 10-bit | 10-bit |
Principais diferenciais
- Large Flash with full segment-LCD (vs PIC18F85J90-I/PT)
- Drop-in 80-TQFP footprint across the J90 family (vs PIC18F67J90-I/PT)
- Higher code density than PIC18F86J65 Ethernet variant (vs PIC18F86J65-I/PT)
Notas de projeto
The PIC18F87J90-I/PT must be powered from 2.0V to 3.6V (J-series 3V rail). Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a single 10 uF bulk capacitor at the package entry. The segment-LCD charge pump draws transient currents up to several mA in multiplex mode; bulk capacitance is critical to prevent VDD droop that resets the MCU under load.
The 80-pin TQFP (12x12 mm) package has theta_JA of approximately 45 C/W on a 4-layer JEDEC test board. Estimated: at 48 MHz / 3.3V with all peripherals active, the device draws 10-15 mA and dissipates around 50 mW, yielding a junction rise of only 2-3 C above ambient, so no heatsink is required. However, in sealed meter enclosures with no airflow, derate ambient temperature to 60 C maximum to keep Tj below 85 C.
Keep the ICSP clock (RB6/ICSPCLK) and ICSP data (RB7/ICSPDAT) traces short and well-spaced from switching signals to avoid programming failures; both pins share the LCD segment 6/7 outputs and must be accessible in production for in-circuit programming. Route the SOSC pins (RC0/RC1) symmetrically and guard them with a ground ring if a 32 kHz crystal is fitted, to prevent RTC jitter. Use a wide ground pour under the package to anchor the analog inputs AN0-AN3 against digital switching noise.
Do not exceed the absolute maximum VDD of 4.0 V or the device will suffer latch-up. The MCLR pin requires a 10 kohm pull-up to VDD; a floating MCLR causes spurious resets. Configure unused I/O as outputs (not inputs) to avoid spurious interrupts in noisy environments. The internal LVD (Low-Voltage Detect) trip level must be set above the brown-out voltage but below 2.0V to allow correct startup.
Informações de conformidade
RoHS and lead-free per Microchip product page; AEC-Q100 automotive grade not certified for this industrial-grade part. PIC18F87J90 product family is suitable for industrial and consumer metering products.
