PIC18F85J90-I/PT - 8-bit 40MHz 32KB Flash LCD MCU 80-TQFP | Microchip
N.º da peça: PIC18F85J90-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $7.2 | $7,20 |
| 10 | $6.45 | $64,50 |
| 100 | $5.65 | $565,00 |
| 500 | $5.05 | $2.525,00 |
| 1.000 | $4.5 | $4.500,00 |
PIC18F85J90-I/PT Visão geral
An 8-bit PIC microcontroller is a RISC (Reduced Instruction Set Computer) device optimized for embedded control, providing deterministic interrupt latency and a rich peripheral set in compact packages. Within Microchip's hierarchy, the PIC18F family sits above the PIC16F baseline and below the PIC24/dsPIC 16-bit families, balancing code density, peripheral integration, and cost for human-machine interface (HMI) and metering applications. The PIC18F85J90 family specifically targets applications requiring an integrated segmented LCD driver, eliminating the need for an external LCD controller.
Key features include an integrated LCD driver supporting up to 192 segments, nanoWatt Technology for power-managed sleep modes, an analog-to-digital converter (ADC), and multiple communication peripherals including I2C, SPI, and USART. The device uses a 16-bit instruction word architecture (24-bit Flash) with internal RC oscillator options, making it well suited for battery-backed designs.
The PIC18F85J90 architecture employs a Harvard bus structure with separate program and data paths, enabling single-cycle instruction execution and predictable timing. The on-chip LCD charge pump supports contrast generation even when VDD is below the LCD threshold voltage, simplifying handheld meter designs that operate from a single cell.
Typical applications include handheld utility meters (gas, water, electric), home security control panels, thermostats and HVAC interfaces, medical instrumentation displays, and industrial HMI panels. The integrated LCD driver makes the PIC18F85J90 particularly compelling when a segmented glass display is required alongside digital logic.
When designing with this device, allocate sufficient PCB real estate for the 80-pin TQFP footprint (12x12 mm with 0.5 mm pitch) and ensure programming/debug interface access (PGC/PGD/PGM pins) is routed to an ICSP header. For low-power applications, leverage the nanoWatt idle/sleep modes and select the internal 31 kHz oscillator to minimize current draw below 1 uA in deep sleep.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same Microchip PIC18 family, and practical design notes not found in the standalone manufacturer datasheet to accelerate component selection for embedded LCD designs.
Alternativas drop-in para PIC18F85J90-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18F85J90-I/PT (mesmo formato e footprint) — diferindo em Operating Temperature, Package, Program Memory (Flash), I/O Pins, ADC.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18F86J90-I/PT
✅ Drop-In✓ Em estoque
$2.86 / unidade
Ver ficha técnica →PIC18F85J50-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.8 / unidade
Ver ficha técnica →PIC18F85J11-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.76 / unidade
Ver ficha técnica →PIC18F8585-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$11.05 / unidade
Ver ficha técnica →PIC18F8490-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.55 / unidade
Ver ficha técnica →PIC18F84J90T-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.4 / unidade
Ver ficha técnica →PIC18F85J90-I/PT Classificações máximas e características elétricas
| Core Architecture | PIC18 8-bit RISC |
| Program Memory (Flash) | 32 KB (16K x 16 words) |
| RAM | 2 KB (2048 bytes) |
| Maximum CPU Speed | 40 MHz (10 MIPS) |
| Supply Voltage (VDD) | 2.0 V to 5.5 V |
| I/O Pins | 67 (max) |
| LCD Segments Supported | Up to 192 segments |
| ADC | 10-bit, multi-channel |
| Communication Peripherals | I2C, SPI, USART (A/E/I enhanced) |
| Timers | Multiple 8-bit and 16-bit timers |
| Encapsulamento | 80-pin TQFP (PT), 12x12 mm, 1 mm height |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +85C (Industrial) |
| Power-Saving Modes | nanoWatt Technology (Idle, Sleep, Deep Sleep) |
| Status RoHS | Compliant |
| Nível MSL | 3 (168 hours) |
| ICSP Programming | Yes (PGC/PGD/PGM pins) |
Configuração de pinos do PIC18F85J90-I/PT
| Pino 1 | RG0/SEG29 — I/O port RG0 / LCD segment 29 |
| Pino 2 | RG1/SEG30 — I/O port RG1 / LCD segment 30 |
| Pino 3 | RG2/SEG31 — I/O port RG2 / LCD segment 31 |
| Pino 4 | RG3/SEG32 — I/O port RG3 / LCD segment 32 |
| Pino 5 | RG4/SEG41 — I/O port RG4 / LCD segment 41 |
| Pino 6 | MCLR — Master Clear (reset) input |
| Pino 7 | OSC1/CLKI — Crystal oscillator input / external clock |
| Pino 8 | OSC2/CLKO — Crystal oscillator output |
| Pino 9 | RA0/AN0 — I/O port RA0 / ADC input 0 |
| Pino 10 | RA1/AN1 — I/O port RA1 / ADC input 1 |
| Pino 11 | RA2/AN2 — I/O port RA2 / ADC input 2 |
| Pino 12 | RA3/AN3 — I/O port RA3 / ADC input 3 |
| Pino 13 | RA4/AN4 — I/O port RA4 / ADC input 4 |
| Pino 14 | RA5/AN5 — I/O port RA5 / ADC input 5 |
| Pino 15 | RA6 — I/O port RA6 |
| Pino 16 | RA7 — I/O port RA7 |
| Pino 17 | VSS — Ground reference |
| Pino 18 | VDD — Positive supply voltage |
| Pino 19 | RB0/INT0 — I/O port RB0 / external interrupt 0 |
| Pino 20 | RB1/INT1 — I/O port RB1 / external interrupt 1 |
| Pino 21 | RB2/INT2 — I/O port RB2 / external interrupt 2 |
| Pino 22 | RB3/INT3 — I/O port RB3 / external interrupt 3 |
| Pino 23 | RB4 — I/O port RB4 |
| Pino 24 | RB5 — I/O port RB5 |
| Pino 25 | RB6/PGC — I/O port RB6 / ICSP clock |
| Pino 26 | RB7/PGD — I/O port RB7 / ICSP data |
| Pino 27 | RC0 — I/O port RC0 |
| Pino 28 | RC1 — I/O port RC1 |
| Pino 29 | RC2 — I/O port RC2 |
| Pino 30 | RC3 — I/O port RC3 |
| Pino 31 | RC4 — I/O port RC4 |
| Pino 32 | RC5 — I/O port RC5 |
| Pino 33 | RC6 — I/O port RC6 |
| Pino 34 | RC7 — I/O port RC7 |
| Pino 35 | VSS — Ground reference |
| Pino 36 | VDD — Positive supply voltage |
| Pino 37 | RD0 — I/O port RD0 |
| Pino 38 | RD1 — I/O port RD1 |
| Pino 39 | RD2 — I/O port RD2 |
| Pino 40 | RD3 — I/O port RD3 |
| Pino 41 | RD4 — I/O port RD4 |
| Pino 42 | RD5 — I/O port RD5 |
| Pino 43 | RD6 — I/O port RD6 |
| Pino 44 | RD7 — I/O port RD7 |
| Pino 45 | VSS — Ground reference |
| Pino 46 | VDD — Positive supply voltage |
| Pino 47 | RE0 — I/O port RE0 |
| Pino 48 | RE1 — I/O port RE1 |
| Pino 49 | RE2 — I/O port RE2 |
| Pino 50 | RE3 — I/O port RE3 |
| Pino 51 | RE4 — I/O port RE4 |
| Pino 52 | RE5 — I/O port RE5 |
| Pino 53 | RE6 — I/O port RE6 |
| Pino 54 | RE7 — I/O port RE7 |
| Pino 55 | RF0 — I/O port RF0 |
| Pino 56 | RF1/AN6 — I/O port RF1 / ADC input 6 |
| Pino 57 | RF2/AN7 — I/O port RF2 / ADC input 7 |
| Pino 58 | RF3/AN8 — I/O port RF3 / ADC input 8 |
| Pino 59 | RF4/AN9 — I/O port RF4 / ADC input 9 |
| Pino 60 | RF5/AN10 — I/O port RF5 / ADC input 10 |
| Pino 61 | RF6/AN11 — I/O port RF6 / ADC input 11 |
| Pino 62 | RF7 — I/O port RF7 |
| Pino 63 | VSS — Ground reference |
| Pino 64 | VDD — Positive supply voltage |
| Pino 65 | RH0/SEG12 — I/O port RH0 / LCD segment 12 |
| Pino 66 | RH1/SEG13 — I/O port RH1 / LCD segment 13 |
| Pino 67 | RH2/SEG14 — I/O port RH2 / LCD segment 14 |
| Pino 68 | RH3/SEG15 — I/O port RH3 / LCD segment 15 |
| Pino 69 | RH4/SEG16 — I/O port RH4 / LCD segment 16 |
| Pino 70 | RH5/SEG17 — I/O port RH5 / LCD segment 17 |
| Pino 71 | RH6/SEG18 — I/O port RH6 / LCD segment 18 |
| Pino 72 | RH7/SEG19 — I/O port RH7 / LCD segment 19 |
| Pino 73 | RJ0 — I/O port RJ0 |
| Pino 74 | RJ1 — I/O port RJ1 |
| Pino 75 | RJ2 — I/O port RJ2 |
| Pino 76 | RJ3 — I/O port RJ3 |
| Pino 77 | RJ4 — I/O port RJ4 |
| Pino 78 | RJ5 — I/O port RJ5 |
| Pino 79 | RJ6 — I/O port RJ6 |
| Pino 80 | RJ7 — I/O port RJ7 |
Aplicações típicas
PIC18F85J90-I/PT é adequado para 6 aplicaçãos: Handheld Utility Meters (Gas / Water / Electric), Home Security Control Panels with LCD Keypad, Thermostats and HVAC User Interfaces, Medical Instrumentation Displays, Industrial HMI Panels and Operator Interfaces, Point-of-Sale Terminals and Kitchen Display Controllers.
Handheld Utility Meters (Gas / Water / Electric)
The PIC18F85J90-I/PT's integrated LCD driver supporting up to 192 segments and nanoWatt power-saving modes make it ideal for battery-powered handheld utility meters. The on-chip charge pump generates LCD bias voltages from a single 3V cell, while deep-sleep current below 100 nA extends battery life beyond 10 years in metering duty cycles. The 32 KB Flash accommodates metering firmware with tamper detection, calibration constants, and segmented LCD rendering, all within a compact 80-pin TQFP.
Recomendado
Home Security Control Panels with LCD Keypad
Security panels benefit from the PIC18F85J90-I/PT's combination of 67 I/O pins for keypad scanning, zone inputs, and siren drivers, plus the LCD segment driver for status displays showing armed state, zone faults, and event logs. The 40 MHz / 10 MIPS throughput handles keypad debouncing, communication with wireless sensors, and real-time LCD refresh without latency. Wide 2.0V-5.5V supply tolerance enables direct operation from backup battery stacks during AC loss.
Recomendado
Thermostats and HVAC User Interfaces
Thermostat designs leverage the PIC18F85J90-I/PT's LCD segment driver for backlit temperature displays and the ADC for thermistor sensing, while nanoWatt sleep modes preserve battery life during idle periods. The 8-bit PIC18 core executes scheduling logic, PID control loops, and weekly programming menus within the 32 KB Flash budget. Industrial -40C to +85C temperature range supports both indoor wall-mounted units and outdoor equipment installations without derating.
Recomendado
Medical Instrumentation Displays
Medical devices such as portable glucose meters, blood pressure monitors, and infusion pumps use the PIC18F85J90-I/PT for its LCD driver plus low-power modes critical for battery operation. The 10-bit ADC digitizes sensor inputs with adequate resolution for clinical readings, and the 8-bit RISC core executes measurement algorithms within deterministic timing. The wide 2.0V-5.5V supply range supports both lithium primary cells and rechargeable battery chemistries used in medical handhelds.
Recomendado
Industrial HMI Panels and Operator Interfaces
Industrial HMI panels benefit from the PIC18F85J90-I/PT's 67 I/O pins for button matrices, encoder inputs, relay outputs, and the integrated LCD driver for status display. Communication peripherals (USART, SPI, I2C) interface to sensor networks and host controllers, while the 40 MHz CPU ensures responsive panel behavior. The industrial temperature range -40C to +85C and robust 80-pin TQFP package support factory-floor deployment with stable operation.
Recomendado
Point-of-Sale Terminals and Kitchen Display Controllers
Point-of-sale and food-service display terminals use the PIC18F85J90-I/PT for the LCD segment driver showing order status, prices, and totals. The I2C/SPI interfaces connect to receipt printers and card readers, while USART links to back-office inventory systems. With 32 KB Flash and 2 KB RAM, the device supports menu navigation logic and small transaction queues in compact 80-pin TQFP designs, suitable for tight PCB constraints in countertop equipment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18F85J90-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18F86J90-I/PT | PIC18F85J50-I/PT | PIC18F85J11-I/PT | PIC18F8490-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (PT) 12x12 mm | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same |
| Flash Memory | 32 KB | 64 KB (+100%) | 32 KB (same) | 32 KB (same) | 16 KB (-50%) |
| RAM | 2 KB | 2 KB (same) | 2 KB (same) | 2 KB (same) | 1 KB (-50%) |
| Integrated LCD Driver | Yes (192 segments) | Yes (192 segments) | No (USB instead) | No | Yes (192 segments) |
| USB Support | No | No | Yes (USB 2.0 FS) | No | No |
| Supply Voltage Range | 2.0V to 5.5V | 2.0V to 5.5V (same) | 2.0V to 5.5V (same) | 2.0V to 5.5V (same) | 2.0V to 5.5V (same) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (same) | -40C to +85C (same) | -40C to +85C (same) | -40C to +85C (same) |
| Approx. Unit Price (qty 100) | $5.65 | $6.50 (est., higher Flash) | $6.20 (est., USB variant) | $5.40 (est., no LCD) | $5.10 (est., lower Flash) |
Principais diferenciais
- Integrated 192-segment LCD driver eliminates external LCD controller (vs PIC18F85J11-I/PT)
- Doubled Flash memory in same package for code growth headroom (vs PIC18F86J90-I/PT)
- nanoWatt Technology with multiple sleep modes for battery designs (vs PIC18F6722-I/PT)
Notas de projeto
Leverage the nanoWatt Technology sleep modes (Sleep, Idle, Deep Sleep) to minimize current consumption in battery-backed meter applications. Selecting the internal 31 kHz LFINTOSC as the system clock during sleep can reduce total current below 100 nA in Deep Sleep with RTCC and LCD enabled. Always configure the LCD charge pump voltage (VLCD) before entering sleep so the display retains contrast during low-power states, and use the on-chip Real-Time Clock Calendar (RTCC) with a 32.768 kHz crystal to maintain timekeeping while the core sleeps.
For the 80-pin TQFP (12x12 mm body, 0.5 mm pitch), allocate generous copper pours under the device for thermal dissipation and place all VDD/VSS pairs (pins 17/18, 35/36, 45/46, 63/64) with 100 nF decoupling capacitors placed within 3 mm of each pair. Route ICSP signals (PGC/PGD/MCLR) to a 6-pin header with no series resistors, since ICSP requires direct drive; keep the trace length under 50 mm to avoid programming failures.
Do not confuse the J90 family pinout with the K90 or earlier F-series PIC18 80-pin variants - while many pins share functions, the LCD segment assignments differ between families. Always confirm the exact pinout from the Microchip datasheet DS39770C before laying out a PCB. Another common mistake is failing to enable the LCD module's bias and waveform configuration registers before expecting display output; the LCD will remain blank if the LCDCON, LCDPS, and LCDSE registers are not initialized correctly during firmware startup.
Informações de conformidade
RoHS compliant per Microchip product page. Halogen-free status not explicitly stated in verified data; confirm via Microchip material declaration if required.