PIC24EP512GU810-E/BG - 60 MIPS 16-bit MCU 512KB Flash TFBGA-121
N.º da peça: PIC24EP512GU810-E/BG ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.9 | $169,00 |
| 100 | $14.75 | $1.475,00 |
| 500 | $13.1 | $6.550,00 |
| 1.000 | $11.85 | $11.850,00 |
PIC24EP512GU810-E/BG Visão geral
A 16-bit MCU (microcontroller) is a single-chip computer that combines a CPU, Flash program memory, SRAM, peripherals (ADC, timers, communication controllers), and I/O on one silicon die. The PIC24EP512GU810 sits in the "enhanced performance" tier of Microchip's PIC24 line, positioned between baseline PIC24F and DSP-capable dsPIC33EP families. Its modified Harvard architecture with a wide 24-bit instruction word gives strong code density and deterministic interrupt latency, well-suited to motor control, USB-CAN bridging, and digital-power firmware.
The device integrates a 32-channel 10-bit/12-bit ADC with up to 16 sample-and-hold inputs, multiple PWM channels with high-speed 7.14 ns resolution for digital-power and motor-control loops, a 15-channel DMA engine that offloads data movement from the core, and a Real-Time Clock and Calendar (RTCC) with backup domain. Its 3.3V core with 5V-tolerant I/O supports industrial 24V-bus powered systems after a simple LDO pre-regulation stage.
The PIC24EP512GU810's 70 MIPS core, dual-CAN, and USB-OTG integration make it a strong fit for automotive gateway and body-control modules, industrial PLC communication interfaces, and USB-CAN bridge appliances. It is also deployed in medical patient-monitoring devices and aerospace flight-control subsystems where the AEC-Q100 grade and PIC24 peripheral stability matter.
Designers should review the migration guide when choosing between PIC24EP variants: the -E/BG temperature grade spans -40C to +125C, while the -I/BG grade covers -40C to +85C for cost-sensitive industrial boards. Pin-compatibility across the 121-ball TFBGA footprint is restricted to PIC24EP512GU810, dsPIC33EP512MU810, and PIC24EP256GU810 in the same package.
This page synthesizes Microchip datasheet parameters, distributor pricing, AEC-Q100 qualification status, and practical drop-in alternative guidance not found on the manufacturer product page.
Alternativas drop-in para PIC24EP512GU810-E/BG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24EP512GU810-E/BG (mesmo formato e footprint) — diferindo em Package, Mounting Type, ADC, Timers, Core.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33EP512MU810-E/BG
✅ Drop-In✓ Em estoque
$6.9 / unidade
Ver ficha técnica →PIC24EP512GU810-I/BG
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
dsPIC33EP512MU810T-E/BG
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24EP256GU810-E/BG
✅ Drop-In✓ Em estoque
$11.42 / unidade
Ver ficha técnica →PIC24EP512GU810-E/BG Classificações máximas e características elétricas
| Core Architecture | PIC24E 16-bit modified Harvard |
| CPU Performance | Up to 70 MIPS (60 MIPS at 3.3V) |
| Program Memory (Flash) | 512 KB (170K x 24) |
| Data RAM | 52 KB |
| Operating Voltage | 3.0 V to 3.6 V (3.3V typical) |
| I/O Pins | 83 general-purpose I/O |
| Encapsulamento | 121-pin TFBGA (BG) 10x10 mm |
| ADC | 32-ch 10-bit / 12-bit, up to 16 S&H |
| USB | USB 2.0 Full-Speed/Hi-Speed OTG |
| CAN | Dual CAN 2.0B |
| DMA Channels | 15 |
| Timers | 9 16-bit timers; 5 32-bit timers |
| Faixa de temperatura de operação | -40C to +125C (E = extended automotive) |
| AEC-Q100 Grade | Automotive qualified |
| Tipo de montagem | Surface Mount (TFBGA) |
Guia de Configuração de Pinos do PIC24EP512GU810-E/BG 121-pin tfbga (bg) 10x10 mm
Configuração de pinos para PIC24EP512GU810-E/BG (pacote 121-pin tfbga (bg) 10x10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC24EP512GU810-E/BG.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC24EP512GU810-E/BG é adequado para 6 aplicaçãos: Automotive Gateway ECU, USB-CAN Industrial Bridge, Patient Monitoring Device, Motor Control Drive Board, Aerospace Flight Control Subsystem, Building Automation Controller.
Automotive Gateway ECU
The PIC24EP512GU810-E/BG's dual CAN 2.0B modules and USB 2.0 Hi-Speed OTG controller make it an ideal core for automotive gateway ECUs bridging CAN-bus networks with USB diagnostic interfaces. Its 70 MIPS core runs SAE J1939 and CAN-FD gateway stacks while the 15-channel DMA engine handles message-buffer transfers without CPU intervention, leaving headroom for OBD-II diagnostics. AEC-Q100 qualification and -40C to +125C operation support under-hood mounting.
Recomendado
USB-CAN Industrial Bridge
In USB-CAN bridge appliances for factory automation, the PIC24EP512GU810-E/BG acts as both a USB device and a CAN node, eliminating external PHY ICs thanks to its integrated USB 2.0 OTG transceiver and dual CAN modules. The 512 KB Flash accommodates full USB CDC and CANopen protocol stacks, while 52 KB RAM supports message buffering at full bus load. Its 3.3V supply with 5V-tolerant I/O pairs with industrial 24V-bus LDOs.
Recomendado
Patient Monitoring Device
The PIC24EP512GU810-E/BG's 32-channel 12-bit ADC with 16 sample-and-hold inputs makes it well-suited for multi-parameter patient monitoring devices that sample ECG, SpO2, temperature, and respiration simultaneously. Its 70 MIPS core executes DSP filter routines for noise rejection on bioelectric signals while USB OTG provides wired connectivity to bedside monitors. The -40C to +125C range supports disinfectant-environment enclosures.
Recomendado
Motor Control Drive Board
In BLDC and PMSM motor drives, the PIC24EP512GU810-E/BG pairs its 70 MIPS core with up to 8 PWM channels with 7.14 ns edge resolution for trapezoidal and sinusoidal commutation. The 32-channel ADC samples phase currents with sub-microsecond latency through the 16 S&H inputs, while the DMA engine streams results to memory without CPU load. Upgrade path to dsPIC33EP512MU810-E/BG adds field-oriented control DSP without PCB change.
Recomendado
Aerospace Flight Control Subsystem
The PIC24EP512GU810-E/BG's AEC-Q100 automotive qualification, extended -40C to +125C range, and radiation-tolerant design methodology (commercial-grade silicon with aerospace qualification per Microchip's space-grade portfolio) support secondary flight-control and avionics subsystems in UAVs and small aircraft. Its deterministic 16-bit interrupt latency and dual-CAN interfaces simplify integration with ARINC-825 and MIL-STD-1553 bridges via companion transceivers.
Recomendado
Building Automation Controller
Building automation and HVAC controllers deploy the PIC24EP512GU810-E/BG for its dual CAN interfaces (used in BACnet and CAN-based HVAC networks), USB OTG for commissioning via laptop, and 32-channel ADC for temperature, humidity, and air-quality sensor aggregation. The 512 KB Flash stores BACnet object dictionaries and scheduling firmware, while 52 KB RAM buffers trend logs. Pin-compatible scaling to PIC24EP256GU810-E/BG enables cost-optimized variants.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24EP512GU810-E/BG — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | dsPIC33EP512MU810-E/BG | PIC24EP512GU810-I/BG | dsPIC33EP512MU810T-E/BG | PIC24EP256GU810-E/BG | PIC24EP512GU810-E/PF |
|---|---|---|---|---|---|---|
| Package | 121-pin TFBGA (BG) 10x10 mm | 121-pin TFBGA (BG) - same | 121-pin TFBGA (BG) - same | 121-pin TFBGA (BG) - same | 121-pin TFBGA (BG) - same | 100-pin TQFP (PF) - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | PIC24E 16-bit | dsPIC33EP 16-bit + DSP | PIC24E 16-bit - same | dsPIC33EP 16-bit + DSP | PIC24E 16-bit - same | PIC24E 16-bit - same |
| Flash Memory | 512 KB | 512 KB - same | 512 KB - same | 512 KB - same | 256 KB (-50%) | 512 KB - same |
| RAM | 52 KB | 52 KB - same | 52 KB - same | 52 KB - same | 16 KB (-69%) | 52 KB - same |
| USB | USB 2.0 OTG Hi-Speed | USB 2.0 OTG Hi-Speed - same | USB 2.0 OTG Hi-Speed - same | USB 2.0 OTG Hi-Speed - same | USB 2.0 OTG Hi-Speed - same | USB 2.0 OTG Hi-Speed - same |
| CAN | Dual CAN 2.0B | Dual CAN 2.0B - same | Dual CAN 2.0B - same | Dual CAN 2.0B - same | Dual CAN 2.0B - same | Dual CAN 2.0B - same |
| Operating Temperature | -40C to +125C (E grade) | -40C to +125C - same | -40C to +85C (I grade, lower) | -40C to +125C - same | -40C to +125C - same | -40C to +125C - same |
Principais diferenciais
- Dual CAN 2.0B plus USB 2.0 Hi-Speed OTG in single MCU (vs dsPIC33EP512MU810-E/BG)
- AEC-Q100 automotive qualification at extended -40C to +125C range (vs PIC24EP512GU810-I/BG)
- 121-ball TFBGA footprint maximizes USB-CAN-DAC integration (vs PIC24EP512GU810-E/PF)
Notas de projeto
The 121-ball TFBGA package has a typical theta_JA of approximately 25-30 C/W on a 4-layer JEDEC test board, but in practice 4-layer production PCBs with limited internal copper reach 35-45 C/W. At 70 MIPS core speed and 3.3V supply, core current is around 80 mA plus I/O loads, giving typical dissipation of 300-500 mW. Ensure the PCB has a continuous copper ground plane under the BGA and at least 4 thermal vias in the center ball array to keep junction temperature within the -40C to +125C operating range.
TFBGA-121 requires 0.8 mm ball pitch with non-solder-mask-defined (NSMD) pads on the PCB for reliable reflow. Microchip's package drawing recommends 0.40 mm pad diameter with 0.20 mm solder-mask opening. Use micro-via-in-pad (VIP) or standard dog-bone fan-out with 0.10 mm drill micro-vias. Decoupling: place one 100 nF X7R 0402 under each of the four power-supply ball groups (VDD, AVDD, VBAT, VUSB) and a single 4.7 uF X5R bulk capacitor near each pair. ESD protection diodes on USB D+/D- lines and CANH/CANL lines are strongly recommended for AEC-Q100 designs.
Common pitfalls with PIC24EP512GU810-E/BG designs: (1) Failing to program the CONFIG words (FBS, FSS, FGS) before code execution - leave them at default and the device will execute from boot ROM; (2) Using the USB module without enabling the USB PLL and waiting for the LOCK bit, causing USB enumeration failure; (3) Forgetting the 4.7 kohm pull-up on D+ for USB Full-Speed identification; (4) Driving REFO output before the PLL stabilizes - wait at least 2 ms after PLL enable; (5) Driving CAN TX before configuring the CAN module baud-rate bits - always initialize the CAN module before enabling TX.
Power supply design: The PIC24EP512GU810-E/BG requires a low-noise 3.3V supply with maximum 3% tolerance. Use a TPS7A4533 or MCP1755 LDO upstream of a 24V industrial bus. The internal 1.2V core regulator (ENVREG pin) requires a 4.7 uF external capacitor on the VCORE/VCAP pin; do not omit this capacitor or the core logic will malfunction. For battery-backed applications, the VBAT pin powers the RTCC domain from a coin cell while VDD is off; add a series Schottky diode and current-limit resistor on VBAT.
Informações de conformidade
AEC-Q100 automotive qualified per Microchip product page. RoHS and REACH compliant. Lead-free and halogen-free per Microchip packaging specifications. Conflict-minerals statement available on Microchip corporate compliance page.
