Microchip Technology

PIC24FJ64GL303-E/M5 - 32MHz 64KB LCD MCU | Microchip

N.º da peça: PIC24FJ64GL303-E/M5 ✓ Ativo
A few hundreds of nA Id 36-pin UQFN, 5x5 mm Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

PIC24FJ64GL303-E/M5 Visão geral

The Microchip Technology PIC24FJ64GL303-E/M5 is a 16-bit PIC24 microcontroller with a 32 MHz maximum operating frequency, 64 KB of ECC flash, 8 KB of RAM, and an integrated segmented LCD controller in a 36-pin UQFN 5x5 mm package. It is designed for low-power applications that combine embedded control, display handling, and autonomous LCD animation.

A low-power microcontroller is a semiconductor device that executes application firmware while minimizing energy consumption during active operation and sleep. The PIC24FJ GL family integrates Core Independent Peripherals and extended LCD animation capabilities, allowing the processor to remain outside the active control loop while display functions continue. The PIC24FJ64GL303-E/M5 belongs to the broader hierarchy of 16-bit RISC microcontroller, embedded processor, and low-power system-on-chip.

Core features include 64 KB of ECC flash for firmware storage, 8 KB of data RAM, and operation up to 32 MHz. The segmented LCD controller supports up to 256 display segments using 8 common lines and 32 segment lines. It also provides autonomous animation functions such as alternating dual-display operation, blinking, and blanking. A charge pump supports contrast management, while XLP technology and sleep current measured in the low hundreds of nanoamperes suit battery-operated equipment.

The device combines a 16-bit PIC24 core with dedicated LCD and Core Independent Peripheral resources. This architecture separates routine application processing from functions that can operate autonomously, reducing the need for continuous CPU intervention during display updates. The segmented LCD controller is particularly useful where a matrix display would consume more power or require more backlight and glass complexity than the application needs.

Typical uses include battery-powered instruments, compact control panels, point-of-sale terminals, sensor-interface products, and industrial monitoring equipment. Its 64 KB program memory supports embedded control logic, while the LCD controller addresses direct glass displays. The 36-pin UQFN 5x5 mm package also supports compact PCB layouts, although its fine pitch requires careful assembly and inspection.

PCB design should preserve the recommended power, decoupling, and exposed-pad layout described by Microchip. Place input and output capacitors close to their associated pins, maintain adequate ground-plane continuity, and follow the manufacturer’s land pattern for the UQFN package. Program the device through an appropriate Microchip programming tool and confirm the exact pin assignments against the manufacturer datasheet before assigning board functions.

This product record combines manufacturer-family details, package information, lifecycle context, and application guidance with an analysis of LCD capability, low-power operation, and PCB implementation. It also identifies the limited drop-in alternatives for which pin and package compatibility can be established without introducing unverified substitutes.

Alternativas drop-in para PIC24FJ64GL303-E/M5 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com PIC24FJ64GL303-E/M5 (mesmo formato e footprint) — diferindo em Package, Sleep Current.

Microchip Technology
Package: 36-pin UQFN (5x5 mm)
Sleep Current: Few hundred nA with RAM and LCD retention

PIC24FJ64GL303-I/M5

✅ Drop-In
Microchip Technology
📦 36-pin UQFN, 5x5 mm
PIC24F 16-bit modified-Harvard · 32 MHz (16 MIPS) · 64 KB (64K x 8) ECC Flash · 8 KB SRAM · 1.8 V to 3.6 V (typical XLP range) · 36-pin UQFN (5x5 mm) · Surface Mount · Integrated segmented LCD, up to 256 segments (8 commons x 32 segments)

Consulte o preço

Ver ficha técnica →

PIC24FJ64GL303-E/M5 Classificações máximas e características elétricas

Microcontroller Core 16-bit PIC24 RISC core
Maximum CPU Frequency 32 MHz
Maximum Instruction Throughput 16 MIPS
Program Flash Memory 64 KB
Program Memory ECC Enabled
Data RAM 8 KB
LCD Display Support Segmented LCD controller
Maximum LCD Segments 256 segments
LCD Common Lines 8 commons
LCD Segment Lines 32 segments
LCD Animation Features Alternating dual display, blinking, and blanking
LCD Contrast Support Integrated charge pump
Low-Power Technology XLP
Sleep Current A few hundreds of nA
Temperature Grade E-Temp grade
Encapsulamento 36-pin UQFN, 5x5 mm
Tipo de montagem Surface mount

Guia de Configuração de Pinos do PIC24FJ64GL303-E/M5 36-pin uqfn, 5x5 mm

Configuração de pinos para PIC24FJ64GL303-E/M5 (pacote 36-pin uqfn, 5x5 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 36-pin uqfn, 5x5 mm para PIC24FJ64GL303-E/M5

Nenhum dado detalhado de pinagem disponível para PIC24FJ64GL303-E/M5.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PIC24FJ64GL303-E/M5 é adequado para 6 aplicaçãos: Battery-Powered Measurement Instruments, Industrial Control Panels, Low-Power Sensor Interfaces, Point-of-Sale Terminals, Medical and Laboratory Readout Devices, Portable Environmental Monitoring.

🔋

Battery-Powered Measurement Instruments

PIC24FJ64GL303-E/M5 fits battery-powered measurement instruments that combine numerical or graphical status information with a segmented LCD. The 16-bit core operates up to 32 MHz for control and calculation, while 64 KB of ECC flash protects stored firmware and 8 KB of RAM supports working data. Its XLP design can reduce sleep current to a few hundreds of nanoamperes, helping extend standby time. The integrated LCD controller supports up to 256 segments with autonomous blinking and blanking, so the processor need not continually refresh every visual element.

🏭

Industrial Control Panels

PIC24FJ64GL303-E/M5 is appropriate for compact industrial control panels using direct segmented glass instead of a backlit graphical display. Its 36-pin UQFN 5x5 mm package permits dense placement, while the LCD controller handles up to 256 segments and 8 common lines. The processor provides 32 MHz performance and 8 KB of RAM for state handling and peripheral coordination. Core Independent Peripheral animation allows indicators to blink, alternate, or blank autonomously, reducing processor activity during routine panel operation.

🧩

Low-Power Sensor Interfaces

PIC24FJ64GL303-E/M5 can serve as the low-power controller for a sensor node that presents measurements through a local segmented display. Its 32 MHz 16-bit core provides responsive peripheral control, while XLP sleep behavior supports systems that spend most of their time between measurement events. The 64 KB ECC flash and 8 KB RAM are suitable for compact embedded control firmware. Keeping display animation and routine interface functions independent of the main application loop can reduce unnecessary wake-ups in a battery-operated design.

🖥️

Point-of-Sale Terminals

PIC24FJ64GL303-E/M5 is suitable for low-power point-of-sale equipment that needs a compact segmented customer display and embedded transaction control. The integrated LCD driver supports up to 256 segments, allowing multiple fields and status indicators to share the same glass. At up to 32 MHz, the 16-bit core can coordinate application logic, while 64 KB of ECC flash and 8 KB of RAM address compact embedded workloads. Autonomous alternating-display and blanking functions are useful when sales, connection, and error states must remain visible without continuous display processing.

💊

Medical and Laboratory Readout Devices

PIC24FJ64GL303-E/M5 can support handheld medical or laboratory readouts where a segmented display is preferable to a power-hungry graphical screen. The low-power MCU architecture, sleep current in the low hundreds of nanoamperes, and XLP technology suit intermittent-use instruments. Its segmented LCD subsystem supports up to 256 segments and includes a charge pump for contrast management. The 32 MHz core, 64 KB ECC flash, and 8 KB RAM support compact firmware for measurement status, calibration constants, controls, and user-facing indicators.

📱

Portable Environmental Monitoring

PIC24FJ64GL303-E/M5 is a practical fit for portable environmental monitors that periodically collect sensor data and show status on a segmented LCD. Its sleep capability helps separate long inactive intervals from short active measurement periods, while the 16-bit processing core supports protocol handling and data conditioning. The integrated LCD controller reduces the need for a separate display driver and provides autonomous blinking or blanking for alerts and operating states. Its compact UQFN package also supports space-constrained handheld enclosures without requiring a larger graphic display.

What are the key specifications of PIC24FJ64GL303-E/M5 that engineers should know?
The PIC24FJ64GL303-E/M5 combines a 16-bit PIC24 core, 32 MHz operation, 64 KB of ECC flash, 8 KB of RAM, and an integrated segmented LCD controller in a 36-pin UQFN package. According to the Microchip product and family documentation, its LCD subsystem supports up to 256 segments with 8 common and 32 segment lines, plus autonomous blinking, blanking, and alternating dual-display animation. XLP technology and sleep current down to a few hundreds of nanoamperes make the device suitable for compact, battery-powered display products.
What is the operating frequency of PIC24FJ64GL303-E/M5?
The PIC24FJ64GL303-E/M5 operates at up to 32 MHz and provides instruction throughput of up to 16 MIPS. According to the Microchip product page and distributor technical listings, the device uses a 16-bit PIC24 core. This processing capability is intended for embedded control, display management, and low-power sensing applications where higher clock performance is useful without requiring the complexity of a larger application processor.
How much flash and RAM does PIC24FJ64GL303-E/M5 have?
The PIC24FJ64GL303-E/M5 provides 64 KB of ECC flash and 8 KB of data RAM. According to the Microchip PIC24FJ GL family documentation and the exact-part distributor listings, the 64 KB program memory is protected by error-correcting code, while 8 KB of SRAM supports application variables, display buffers, stacks, and peripheral data handling. Firmware and working-memory requirements should therefore be checked against these fixed capacities before PCB design is finalized.
Where can I download the PIC24FJ64GL303-E/M5 datasheet PDF?
The official PIC24FJ64GL303-E/M5 documentation is available through the Microchip Technology product page at https://www.microchip.com/en-us/product/PIC24FJ64GL303. That page provides the manufacturer’s device information and links to supporting documentation. Use the pin-description table, electrical characteristic tables, and UQFN land-pattern information there when assigning pins and laying out the board.
Where can I find the PIC24FJ64GL303-E/M5 pinout?
The authoritative PIC24FJ64GL303-E/M5 pin assignments are shown in the Microchip manufacturer datasheet and pin-description tables for the 36-pin UQFN package. The device uses a 5x5 mm UQFN outline, so its exposed pad and fine-pitch lands must be implemented exactly as specified by Microchip. Use the manufacturer drawing when checking signal names, power pins, ground connections, and the exposed thermal and electrical pad.
What can replace PIC24FJ64GL303-E/M5?
PIC24FJ64GL303-I/M5 is a verified same-package alternative because it retains the 36-pin UQFN 5x5 mm outline and the same 16-bit, 32 MHz, 64 KB flash, and 8 KB RAM architecture. Its primary documented distinction is the temperature-grade suffix, so designers should confirm the required environmental range. Cross-brand drop-in replacements were not established, and changing MCU families should not be treated as a drop-in substitution.
Is PIC24FJ64GL303-I/M5 a drop-in replacement for PIC24FJ64GL303-E/M5?
PIC24FJ64GL303-I/M5 is pin- and package-compatible with PIC24FJ64GL303-E/M5 because both use the 36-pin UQFN 5x5 mm package and share the same core and memory configuration. The grade suffix changes the intended temperature class, so suitability depends on the operating environment. Verify every pin function, power requirement, and timing constraint in the manufacturer datasheet before production substitution.
PIC24FJ64GL303-E/M5 vs PIC24FJ64GL303-I/M5 — which is better for industrial equipment?
PIC24FJ64GL303-I/M5 is generally the more appropriate candidate for industrial equipment when its specified temperature grade covers the installation environment, while PIC24FJ64GL303-E/M5 serves the extended-temperature E-Temp variant. Both retain a 16-bit core, 32 MHz maximum frequency, 64 KB ECC flash, 8 KB RAM, LCD controller, and 36-pin UQFN package. The choice should follow the required ambient range rather than switching solely for availability.
When should I choose PIC24FJ64GL303-E/M5 over PIC24FJ64GL303-I/M5?
Choose PIC24FJ64GL303-E/M5 when the product requires the E-Temp grade and its specified environmental limits match the enclosure temperature. Choose PIC24FJ64GL303-I/M5 when that grade better matches the required industrial operating range. Both devices use the same 36-pin UQFN 5x5 mm footprint and the same 64 KB flash, 8 KB RAM, and 32 MHz processing architecture, simplifying software and board-layout continuity.
Is PIC24FJ64GL303-E/M5 suitable for a battery-powered LCD product?
Yes, PIC24FJ64GL303-E/M5 is suitable for battery-powered LCD products because its XLP architecture supports sleep current down to a few hundreds of nanoamperes. The integrated segmented LCD controller can operate up to 256 segments and provides autonomous blinking, blanking, and alternating-display animation, reducing the need for continuous processor activity. Battery-life calculations should include active current, peripheral activity, display load, and the selected external components.
Where to buy PIC24FJ64GL303-E/M5 online?
Use the Request a Quote form on this page to request PIC24FJ64GL303-E/M5 pricing, current availability, and lead time. The exact device is listed by multiple authorized distribution channels, but stock and commercial terms can change independently. For production planning, specify the required quantity, package format, date-code needs, and shipping destination in the quote request.
What is the price of PIC24FJ64GL303-E/M5?
Use the Request a Quote form on this page for the current unit price and quantity breaks for PIC24FJ64GL303-E/M5. Commercial pricing depends on order quantity, package format, inventory, and delivery terms, so a static figure can become outdated. The request should identify the exact MPN PIC24FJ64GL303-E/M5 to avoid confusion with the related grade and packaging variants.
What is the lead time for PIC24FJ64GL303-E/M5?
Request the current lead time for PIC24FJ64GL303-E/M5 through the Request a Quote form on this page. Lead time can vary with order quantity, package format, production scheduling, and inventory status. Providing the forecast consumption, target ship date, and permitted delivery window enables the supplier to quote the most relevant manufacturing and logistics commitment.
Is PIC24FJ64GL303-E/M5 in stock?
Current stock for PIC24FJ64GL303-E/M5 should be confirmed through the Request a Quote form on this page. Inventory levels can change across distribution channels and package quantities, while the manufacturer and distributors may show different fulfillment options. Include the required quantity, tube or tape-and-reel preference, and destination when requesting a stock confirmation.
Does PIC24FJ64GL303-E/M5 support autonomous LCD animation?
Yes, the PIC24FJ64GL303-E/M5 supports autonomous LCD animation through its segmented LCD controller. According to the Microchip family documentation, the controller supports alternating dual-display operation, blinking, and blanking across as many as 256 segments using 8 common and 32 segment lines. These Core Independent Peripheral functions can update display behavior without continuous CPU intervention, improving suitability for low-power instruments and control panels.

Dados de referência de engenharia para PIC24FJ64GL303-E/M5 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PIC24FJ64GL303-E/M5 when the product requires the E-Temp grade and its documented environmental limits suit the target enclosure. Its 32 MHz 16-bit core, 64 KB ECC flash, 8 KB RAM, and integrated controller for as many as 256 LCD segments provide a compact solution for battery-operated instruments, control panels, and sensor readouts. PIC24FJ64GL303-I/M5 is the practical same-footprint alternative when the I grade better matches the required industrial temperature range; its core, memory, LCD resources, and package remain aligned. No cross-brand drop-in equivalent was established, so products from another MCU family should be treated as redesign candidates rather than substitutions. In either case, validate pin multiplexing, operating voltage, peripheral configuration, display drive requirements, and the complete manufacturer land pattern before production release.

Comparação com alternativas

Parâmetro Este produto PIC24FJ64GL303-I/M5
Brand Microchip Technology Microchip Technology
Package 36-pin UQFN, 5x5 mm 36-pin UQFN, 5x5 mm
Microcontroller Core 16-bit PIC24 RISC core 16-bit PIC24 RISC core
Maximum CPU Frequency 32 MHz 32 MHz
Program Flash Memory 64 KB ECC flash 64 KB ECC flash
Data RAM 8 KB 8 KB
LCD Controller Segmented LCD with up to 256 segments, 8 commons, and 32 segment lines Segmented LCD with up to 256 segments, 8 commons, and 32 segment lines
Low-Power Technology XLP with sleep current down to a few hundreds of nA XLP with sleep current down to a few hundreds of nA
Temperature Grade E-Temp I grade

Principais diferenciais

  • Integrated segmented LCD animation reduces continuous display-processor involvement (vs PIC24FJ64GL303-I/M5)
  • Compact display and control integration in a 36-pin UQFN (vs PIC24FJ64GL303-I/M5)
  • Low-power operation supports long-duty-cycle instruments (vs PIC24FJ64GL303-I/M5)

Notas de projeto

Implement the Microchip 36-pin UQFN 5x5 mm land pattern exactly, including the exposed pad, thermal-via arrangement, solder-mask definition, and paste stencil. Place the device-side input and output bypass capacitors as close as practical to their power pins. Maintain a continuous ground reference beneath and around the package so the exposed pad can transfer heat and provide the required low-impedance return path.

Treat the integrated LCD charge pump as a load that may vary with display pattern, contrast setting, and operating voltage. Validate the display current across all expected segments and operating modes because a dense LCD pattern can materially affect battery life. Use the manufacturer’s power-management and peripheral configuration guidance to disable unused peripherals and select the appropriate sleep mode before estimating standby endurance.

Keep the 32 MHz signal path compact and route sensitive analog or sensor inputs away from LCD drive, charge-pump, and switching-node areas. Although the MCU uses a 5x5 mm UQFN footprint, its lead spacing is still fine enough that assembly inspection and adequate solder fill are important. Follow the manufacturer’s board-layout guidance for decoupling, grounding, and exposed-pad vias to minimize ringing and thermal stress.

Do not substitute a different PIC24FJ family member solely because its flash and RAM ratings appear similar. Peripherals, LCD common and segment counts, pin multiplexing, voltage limits, and temperature ratings can vary across the family. For PIC24FJ64GL303-I/M5, verify that the I temperature grade covers the product’s ambient requirements and confirm the complete pin assignment against the manufacturer documentation before releasing a replacement BOM.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MPN. The listed E-Temp designation is a device temperature grade and does not by itself establish automotive qualification.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PIC24FJ64GL303-E/M5 PIC24FJ64GL303 datasheet PIC24FJ64GL303-E/M5 datasheet PIC24FJ64GL303-E/M5 pinout PIC24FJ64GL303-E/M5 price PIC24FJ64GL303-E/M5 stock PIC24FJ64GL303-E/M5 equivalent PIC24FJ64GL303-E/M5 replacement PIC24FJ64GL303 vs PIC24FJ64GL303-I/M5 Microchip PIC24FJ64GL303-E/M5 PIC24FJ64GL303 UQFN-36 footprint PIC24FJ64GL303 segmented LCD application

Componentes & termos relacionados

Microchip Technology PIC24FJ64GL303-E/M5 PIC24FJ64GL303 PIC24FJ64GL303-I/M5 PIC24FJ64GL303T-E/M5 PIC24 16-bit RISC microcontroller embedded microcontroller low-power MCU XLP technology Core Independent Peripherals segmented LCD controller LCD animation charge pump ECC flash system RAM 32 MHz 16 MIPS 256 LCD segments 36-pin UQFN UQFN-36 package family 5x5 mm surface-mount package battery-powered instrumentation industrial control panel
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ