PIC24FJ64GL303-E/M5 - 32MHz 64KB LCD MCU | Microchip
MPN: PIC24FJ64GL303-E/M5 ✓ NakahandaPIC24FJ64GL303-E/M5 Ulas
A low-power microcontroller is a semiconductor device that executes application firmware while minimizing energy consumption during active operation and sleep. The PIC24FJ GL family integrates Core Independent Peripherals and extended LCD animation capabilities, allowing the processor to remain outside the active control loop while display functions continue. The PIC24FJ64GL303-E/M5 belongs to the broader hierarchy of 16-bit RISC microcontroller, embedded processor, and low-power system-on-chip.
Core features include 64 KB of ECC flash for firmware storage, 8 KB of data RAM, and operation up to 32 MHz. The segmented LCD controller supports up to 256 display segments using 8 common lines and 32 segment lines. It also provides autonomous animation functions such as alternating dual-display operation, blinking, and blanking. A charge pump supports contrast management, while XLP technology and sleep current measured in the low hundreds of nanoamperes suit battery-operated equipment.
The device combines a 16-bit PIC24 core with dedicated LCD and Core Independent Peripheral resources. This architecture separates routine application processing from functions that can operate autonomously, reducing the need for continuous CPU intervention during display updates. The segmented LCD controller is particularly useful where a matrix display would consume more power or require more backlight and glass complexity than the application needs.
Typical uses include battery-powered instruments, compact control panels, point-of-sale terminals, sensor-interface products, and industrial monitoring equipment. Its 64 KB program memory supports embedded control logic, while the LCD controller addresses direct glass displays. The 36-pin UQFN 5x5 mm package also supports compact PCB layouts, although its fine pitch requires careful assembly and inspection.
PCB design should preserve the recommended power, decoupling, and exposed-pad layout described by Microchip. Place input and output capacitors close to their associated pins, maintain adequate ground-plane continuity, and follow the manufacturer’s land pattern for the UQFN package. Program the device through an appropriate Microchip programming tool and confirm the exact pin assignments against the manufacturer datasheet before assigning board functions.
This product record combines manufacturer-family details, package information, lifecycle context, and application guidance with an analysis of LCD capability, low-power operation, and PCB implementation. It also identifies the limited drop-in alternatives for which pin and package compatibility can be established without introducing unverified substitutes.
Mga alternatibo na pwedeng ilagay na PIC24FJ64GL303-E/M5 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24FJ64GL303-E/M5 (parehas na form factor at footprint) — pagkakaiba sa Package, Sleep Current.
PIC24FJ64GL303-I/M5
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ64GL303-E/M5 Mga Pinakamataas na Rating at Electrical Characteristics
| Microcontroller Core | 16-bit PIC24 RISC core |
| Maximum CPU Frequency | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS |
| Program Flash Memory | 64 KB |
| Program Memory ECC | Enabled |
| Data RAM | 8 KB |
| LCD Display Support | Segmented LCD controller |
| Maximum LCD Segments | 256 segments |
| LCD Common Lines | 8 commons |
| LCD Segment Lines | 32 segments |
| LCD Animation Features | Alternating dual display, blinking, and blanking |
| LCD Contrast Support | Integrated charge pump |
| Low-Power Technology | XLP |
| Sleep Current | A few hundreds of nA |
| Temperature Grade | E-Temp grade |
| Packhaging | 36-pin UQFN, 5x5 mm |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng PIC24FJ64GL303-E/M5 36-pin uqfn, 5x5 mm
Pin configuration para sa PIC24FJ64GL303-E/M5 (36-pin uqfn, 5x5 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC24FJ64GL303-E/M5.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC24FJ64GL303-E/M5 ay nararapat para sa 6 aplikasyons: Battery-Powered Measurement Instruments, Industrial Control Panels, Low-Power Sensor Interfaces, Point-of-Sale Terminals, Medical and Laboratory Readout Devices, Portable Environmental Monitoring.
Battery-Powered Measurement Instruments
PIC24FJ64GL303-E/M5 fits battery-powered measurement instruments that combine numerical or graphical status information with a segmented LCD. The 16-bit core operates up to 32 MHz for control and calculation, while 64 KB of ECC flash protects stored firmware and 8 KB of RAM supports working data. Its XLP design can reduce sleep current to a few hundreds of nanoamperes, helping extend standby time. The integrated LCD controller supports up to 256 segments with autonomous blinking and blanking, so the processor need not continually refresh every visual element.
Industrial Control Panels
PIC24FJ64GL303-E/M5 is appropriate for compact industrial control panels using direct segmented glass instead of a backlit graphical display. Its 36-pin UQFN 5x5 mm package permits dense placement, while the LCD controller handles up to 256 segments and 8 common lines. The processor provides 32 MHz performance and 8 KB of RAM for state handling and peripheral coordination. Core Independent Peripheral animation allows indicators to blink, alternate, or blank autonomously, reducing processor activity during routine panel operation.
Low-Power Sensor Interfaces
PIC24FJ64GL303-E/M5 can serve as the low-power controller for a sensor node that presents measurements through a local segmented display. Its 32 MHz 16-bit core provides responsive peripheral control, while XLP sleep behavior supports systems that spend most of their time between measurement events. The 64 KB ECC flash and 8 KB RAM are suitable for compact embedded control firmware. Keeping display animation and routine interface functions independent of the main application loop can reduce unnecessary wake-ups in a battery-operated design.
Point-of-Sale Terminals
PIC24FJ64GL303-E/M5 is suitable for low-power point-of-sale equipment that needs a compact segmented customer display and embedded transaction control. The integrated LCD driver supports up to 256 segments, allowing multiple fields and status indicators to share the same glass. At up to 32 MHz, the 16-bit core can coordinate application logic, while 64 KB of ECC flash and 8 KB of RAM address compact embedded workloads. Autonomous alternating-display and blanking functions are useful when sales, connection, and error states must remain visible without continuous display processing.
Medical and Laboratory Readout Devices
PIC24FJ64GL303-E/M5 can support handheld medical or laboratory readouts where a segmented display is preferable to a power-hungry graphical screen. The low-power MCU architecture, sleep current in the low hundreds of nanoamperes, and XLP technology suit intermittent-use instruments. Its segmented LCD subsystem supports up to 256 segments and includes a charge pump for contrast management. The 32 MHz core, 64 KB ECC flash, and 8 KB RAM support compact firmware for measurement status, calibration constants, controls, and user-facing indicators.
Portable Environmental Monitoring
PIC24FJ64GL303-E/M5 is a practical fit for portable environmental monitors that periodically collect sensor data and show status on a segmented LCD. Its sleep capability helps separate long inactive intervals from short active measurement periods, while the 16-bit processing core supports protocol handling and data conditioning. The integrated LCD controller reduces the need for a separate display driver and provides autonomous blinking or blanking for alerts and operating states. Its compact UQFN package also supports space-constrained handheld enclosures without requiring a larger graphic display.
Impormasyon ng Talumpati sa Engineering for PIC24FJ64GL303-E/M5 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC24FJ64GL303-I/M5 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 36-pin UQFN, 5x5 mm | 36-pin UQFN, 5x5 mm |
| Microcontroller Core | 16-bit PIC24 RISC core | 16-bit PIC24 RISC core |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Program Flash Memory | 64 KB ECC flash | 64 KB ECC flash |
| Data RAM | 8 KB | 8 KB |
| LCD Controller | Segmented LCD with up to 256 segments, 8 commons, and 32 segment lines | Segmented LCD with up to 256 segments, 8 commons, and 32 segment lines |
| Low-Power Technology | XLP with sleep current down to a few hundreds of nA | XLP with sleep current down to a few hundreds of nA |
| Temperature Grade | E-Temp | I grade |
Pangunahing mga Pagkakaiba
- Integrated segmented LCD animation reduces continuous display-processor involvement (kumpara saPIC24FJ64GL303-I/M5)
- Compact display and control integration in a 36-pin UQFN (kumpara saPIC24FJ64GL303-I/M5)
- Low-power operation supports long-duty-cycle instruments (kumpara saPIC24FJ64GL303-I/M5)
Talaan ng Disenyo
Implement the Microchip 36-pin UQFN 5x5 mm land pattern exactly, including the exposed pad, thermal-via arrangement, solder-mask definition, and paste stencil. Place the device-side input and output bypass capacitors as close as practical to their power pins. Maintain a continuous ground reference beneath and around the package so the exposed pad can transfer heat and provide the required low-impedance return path.
Treat the integrated LCD charge pump as a load that may vary with display pattern, contrast setting, and operating voltage. Validate the display current across all expected segments and operating modes because a dense LCD pattern can materially affect battery life. Use the manufacturer’s power-management and peripheral configuration guidance to disable unused peripherals and select the appropriate sleep mode before estimating standby endurance.
Keep the 32 MHz signal path compact and route sensitive analog or sensor inputs away from LCD drive, charge-pump, and switching-node areas. Although the MCU uses a 5x5 mm UQFN footprint, its lead spacing is still fine enough that assembly inspection and adequate solder fill are important. Follow the manufacturer’s board-layout guidance for decoupling, grounding, and exposed-pad vias to minimize ringing and thermal stress.
Do not substitute a different PIC24FJ family member solely because its flash and RAM ratings appear similar. Peripherals, LCD common and segment counts, pin multiplexing, voltage limits, and temperature ratings can vary across the family. For PIC24FJ64GL303-I/M5, verify that the I temperature grade covers the product’s ambient requirements and confirm the complete pin assignment against the manufacturer documentation before releasing a replacement BOM.
Impormasyon ng Pagsunod sa Kautusan
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MPN. The listed E-Temp designation is a device temperature grade and does not by itself establish automotive qualification.