PIC24FJ64GU202-E/SO - 16-Bit 32MHz USB MCU | Microchip
N.º da peça: PIC24FJ64GU202-E/SO ✓ AtivoPIC24FJ64GU202-E/SO Visão geral
A microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, serial controllers, and analog converters. Within the product hierarchy, this device is a 16-bit PIC24 microcontroller, a member of the PIC24FJ GP2/GU2 family, and an MCU designed for embedded control and USB-connected products. Core independent peripherals can perform time-critical functions while the main CPU handles application logic, improving responsiveness in mixed analog and digital systems.
The PIC24FJ64GU202-E/SO provides up to 64 KB of ECC flash for firmware storage and 8 KB of SRAM for working data. Its 32 MHz CPU delivers up to 16 MIPS, while Full Speed USB 2.0 support includes host, device, and OTG operating roles. The peripheral complement includes two UART modules, two SPI interfaces, and two I2C interfaces. XLP technology supports low-power operation, and the manufacturer describes sleep current down to a few hundreds of nanamps while retaining core functionality.
The 16-bit architecture provides a wider internal data path than an 8-bit MCU while retaining a cost-effective and straightforward programming model. ECC flash improves program-memory reliability by detecting corrected errors, an important consideration in applications that must maintain stable firmware over long operating periods. The independent 32 kHz timer oscillator and dedicated timer resources allow timekeeping and event handling without relying entirely on the main system clock.
Typical uses include USB-connected data acquisition, industrial control panels, medical monitoring equipment, USB serial adapters, portable instruments, and compact consumer products. The 28-pin package also suits cost-driven designs that prefer through-hole assembly rather than a leadless land-grid array. Designers must still check the pin multiplexing and analog-reference requirements in the manufacturer pin-description table before assigning PCB functions.
When planning the PCB, reserve the USB data lines and differential pair geometry for controlled impedance routing, place the required USB decoupling close to the device, and maintain the recommended separation between analog and digital sections. The E temperature designation identifies the extended-temperature ordering option, while the SO suffix identifies the 28-pin SOIC package and the trailing SO marking reflects tube packing as listed for this part.
Alternativas drop-in para PIC24FJ64GU202-E/SO — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24FJ64GU202-E/SO (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Program Memory (Flash).
PIC24FJ64GU202-I/SO
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC24FJ64GU205-E/SO
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FJ64GU204-E/SO
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC24FJ64GU203-E/SO
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC24FJ64GU202T-E/SO
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FJ64GU202-E/SO Classificações máximas e características elétricas
| Product Type | 16-bit RISC microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 64 KB ECC Flash |
| Program Memory Organization | 22K x 24 words |
| Data Memory | 8 KB RAM |
| USB Version | USB 2.0 Full Speed |
| USB Operating Roles | Host, Device, and OTG |
| UART Modules | 2 |
| SPI Modules | 2 |
| I2C Modules | 2 |
| Core Independent Peripherals | Yes, CIPs |
| Low-Power Technology | XLP |
| Sleep Current | Down to a few hundreds of nA |
| Independent Low-Power Timer Oscillator | 32 kHz |
| I/O Pin Current | 18 mA sink and 18 mA source on all I/O pins |
| Encapsulamento | SOIC-28-300 mil |
| Contagem de pinos | 28 |
| Tipo de montagem | Surface Mount |
| Process Technology | CMOS |
| Temperature Grade | Extended (E-temp) |
| Packing | Tube |
| Status RoHS | Compliant |
| DMA Controller | Two-channel |
Guia de Configuração de Pinos do PIC24FJ64GU202-E/SO soic-28-300 mil
Configuração de pinos para PIC24FJ64GU202-E/SO (pacote soic-28-300 mil). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC24FJ64GU202-E/SO.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC24FJ64GU202-E/SO é adequado para 6 aplicaçãos: USB Data Acquisition and Sensor Hub, USB Serial Adapter and Configuration Interface, Industrial Control Panel and HMI Interface, Portable Medical Monitoring Instrument, USB Programmable Control and Test Fixture, Low-Power USB Connected Sensor Node.
USB Data Acquisition and Sensor Hub
The PIC24FJ64GU202-E/SO fits a USB-connected measurement hub that gathers readings from external sensors and forwards them to a host computer. Its Full Speed USB 2.0 device capability provides the communication path, while two I2C and two SPI interfaces can connect mixed sensor types without requiring additional serial controllers. The 16-bit CPU at 32 MHz and 16 MIPS has ample throughput for scaling, filtering, and packet preparation, and the 8 KB SRAM supports working buffers. The 28-pin SOIC footprint also keeps the assembly compatible with conventional leaded-board manufacturing for industrial instrumentation.
Recomendado
USB Serial Adapter and Configuration Interface
The PIC24FJ64GU202-E/SO can implement a compact USB-to-serial or configuration interface for an embedded control system. Two UART modules allow two asynchronous serial ports, while the USB module operates as a Full Speed USB device for command exchange with a host. The 16-bit architecture and 32 MHz operating speed support protocol conversion, buffering, and background servicing, and 64 KB of ECC flash provides room for a bootloader and application firmware. Use the GU202 only where the required USB descriptors and serial levels match the target system, since the family contains variants with different USB roles.
Recomendado
Industrial Control Panel and HMI Interface
The PIC24FJ64GU202-E/SO suits an industrial control panel that communicates with a host over USB while handling local switches, indicators, and sensors. Its 2 UART, 2 SPI, and 2 I2C interfaces allow the controller to connect serial controllers, flash storage, displays, and sensor devices while the main core performs control logic. The E temperature-grade ordering option is appropriate for designs intended to operate across an extended commercial or industrial temperature range. XLP low-power capability is also useful in panels that spend part of their operating cycle idle between operator interactions.
Recomendado
Portable Medical Monitoring Instrument
The PIC24FJ64GU202-E/SO can serve as the control processor in a portable medical monitoring instrument that records sensor information and transfers it through USB. Its 16-bit RISC core and 32 MHz maximum frequency support signal conditioning, event detection, and display updates, while ECC flash supports dependable firmware retention. Two SPI interfaces can serve analog front ends or storage devices, and two I2C controllers can handle sensors and configuration devices. For medical use, validate the complete signal chain, isolation strategy, firmware risk controls, and regulatory obligations rather than relying on MCU qualification alone.
Recomendado
USB Programmable Control and Test Fixture
The PIC24FJ64GU202-E/SO is well suited to a USB-programmable test fixture that controls relays, indicators, and instrumentation while logging results on a host computer. Full Speed USB 2.0 provides a direct peripheral connection, and the two UART modules can support legacy test equipment alongside the USB link. The two-channel DMA controller can reduce CPU involvement in data movement, while the independent 32 kHz timer oscillator provides a low-power timing reference for long-duration tests. Its 28-pin SOIC package simplifies assembly into fixture boards and supports serviceable through-hole-style layouts.
Recomendado
Low-Power USB Connected Sensor Node
The PIC24FJ64GU202-E/SO supports a low-power USB-connected sensor node that wakes to acquire a reading, transfers data, and then returns to a reduced-power state. Microchip describes GU2-family sleep current down to a few hundreds of nanamps, making the XLP architecture useful for duty-cycled sensing. The two-channel DMA controller and core independent peripherals can move data and execute timing functions with limited core involvement. USB enumeration behavior, wake-up support, and current measurements must be verified for the exact firmware and operating mode before estimating battery life.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24FJ64GU202-E/SO — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24FJ64GU202-I/SO | PIC24FJ64GU205-E/SO | PIC24FJ64GU204-E/SO | PIC24FJ64GU203-E/SO | PIC24FJ64GU202T-E/SO |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SOIC-28-300 mil | SOIC-28-300 mil | SOIC-28-300 mil | SOIC-28-300 mil | SOIC-28-300 mil | SOIC-28-300 mil |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Program Memory | 64 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash |
| Data Memory | 8 KB RAM | 8 KB RAM | 8 KB RAM | 8 KB RAM | 8 KB RAM | 8 KB RAM |
| Temperature Designation | E-temp | I-temp | E-temp | E-temp | E-temp | E-temp |
Principais diferenciais
- Full USB role flexibility in a 28-pin package (vs PIC24FJ64GU202-I/SO)
- Extended-temperature ordering option (vs PIC24FJ64GU202-I/SO)
- 16-bit performance with ECC program memory (vs PIC24FJ64GU205-E/SO)
- Broad serial connectivity without external controllers (vs PIC24FJ64GU204-E/SO)
Notas de projeto
Route the Full Speed USB D+ and D- pair as a controlled-impedance differential pair with the spacing and trace length recommended in the family datasheet. Keep the pair away from switching-node copper and high-current return paths, and place USB-supporting bypass components close to their associated supply pins. The 28-pin SOIC footprint has limited routing freedom, so assign USB, crystal, programming, and analog functions during schematic capture before placing the remaining components.
Decouple each required supply domain according to the manufacturer pin-description and electrical-characteristics tables, including any USB-related supply requirements. Confirm the selected regulator's voltage, startup behavior, and current margin against active and sleep operating conditions. XLP can reduce idle demand to a few hundreds of nanamps in suitable modes, but USB attachment, active peripherals, and I/O loading can dominate the real supply current.
Do not interchange the E, I, and T suffixes without checking both electrical grade and packing. The E suffix identifies the extended-temperature ordering option, while T identifies the tube packing option. Also validate the exact USB role set and peripheral multiplexing for related GU205-family members, because matching package dimensions alone does not guarantee that all firmware, USB descriptors, or peripheral assignments remain unchanged.
Keep sensitive analog inputs away from USB data lines and digital return currents, and follow the family reference layout for analog grounding and bypassing. The independent 32 kHz timer oscillator can support low-power timing, but clock-source selection and peripheral clocks must be configured consistently. When using DMA, verify that the source and destination buffers remain within the 8 KB SRAM map and that transfers do not conflict with USB servicing requirements.
Informações de conformidade
The verified product listing identifies the device as RoHS compliant. REACH, halogen-free status, and conflict-minerals status are not stated and remain unknown. AEC-Q100 does not apply to this general-purpose microcontroller.