Microchip Technology

PIC24FJ64GU202-E/SO - 16-Bit 32MHz USB MCU | Microchip

MPN: PIC24FJ64GU202-E/SO ✓ Nakahanda
Down to a few hundreds of nA Id SOIC-28-300 mil Package 32 MHz Speed 64 KB ECC Flash Memory
MOQ: 1 |

PIC24FJ64GU202-E/SO Ulas

The Microchip Technology PIC24FJ64GU202-E/SO is a 16-bit RISC microcontroller with 64 KB of ECC flash memory, 8 KB of SRAM, a 32 MHz maximum operating frequency, and Full Speed USB 2.0 connectivity in a 28-pin SOIC package. The GU2 family combines a 16-bit PIC24 core with core independent peripherals (CIPs), XLP low-power operation, and a broad communications peripheral set. A 28-pin SOIC-300 mil package supports conventional leaded assembly while providing access to the device's mixed-signal, communications, and timing resources.

A microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, serial controllers, and analog converters. Within the product hierarchy, this device is a 16-bit PIC24 microcontroller, a member of the PIC24FJ GP2/GU2 family, and an MCU designed for embedded control and USB-connected products. Core independent peripherals can perform time-critical functions while the main CPU handles application logic, improving responsiveness in mixed analog and digital systems.

The PIC24FJ64GU202-E/SO provides up to 64 KB of ECC flash for firmware storage and 8 KB of SRAM for working data. Its 32 MHz CPU delivers up to 16 MIPS, while Full Speed USB 2.0 support includes host, device, and OTG operating roles. The peripheral complement includes two UART modules, two SPI interfaces, and two I2C interfaces. XLP technology supports low-power operation, and the manufacturer describes sleep current down to a few hundreds of nanamps while retaining core functionality.

The 16-bit architecture provides a wider internal data path than an 8-bit MCU while retaining a cost-effective and straightforward programming model. ECC flash improves program-memory reliability by detecting corrected errors, an important consideration in applications that must maintain stable firmware over long operating periods. The independent 32 kHz timer oscillator and dedicated timer resources allow timekeeping and event handling without relying entirely on the main system clock.

Typical uses include USB-connected data acquisition, industrial control panels, medical monitoring equipment, USB serial adapters, portable instruments, and compact consumer products. The 28-pin package also suits cost-driven designs that prefer through-hole assembly rather than a leadless land-grid array. Designers must still check the pin multiplexing and analog-reference requirements in the manufacturer pin-description table before assigning PCB functions.

When planning the PCB, reserve the USB data lines and differential pair geometry for controlled impedance routing, place the required USB decoupling close to the device, and maintain the recommended separation between analog and digital sections. The E temperature designation identifies the extended-temperature ordering option, while the SO suffix identifies the 28-pin SOIC package and the trailing SO marking reflects tube packing as listed for this part.

Mga alternatibo na pwedeng ilagay na PIC24FJ64GU202-E/SO — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok PIC24FJ64GU202-E/SO (parehas na form factor at footprint) — pagkakaiba sa Package, Operating Temperature, Program Memory (Flash).

Microchip Technology
Package: 28-pin SOIC (SO), wide-body
Operating Temperature: -40 C to +125 C (E-temp / extended)
Program Memory (Flash): 32 KB ECC (11K x 24)
Microchip Technology
Package: 28-pin SOIC (SO)
Operating Temperature: -40C to +85C (Industrial)
Program Memory (Flash): 64 KB (22K x 24) ECC Flash

PIC24FJ64GU202-I/SO

✅ Drop-In
Microchip Technology
📦 SOIC-28-300 mil
PIC24F 16-bit modified Harvard · 32 MHz (16 MIPS) · 64 KB (22K x 24) ECC Flash · 8 KB · USB 2.0 Full-Speed Host/Device/OTG PHY integrated · 12-bit, up to 9 channels · 4 x 16-bit · 2x UART, 2x SPI, 2x I2C

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC24FJ64GU205-E/SO

✅ Drop-In
📦 SOIC-28-300 mil
Same 28-pin SOIC family footprint and 64 KB ECC Flash, 8 KB RAM, 32 MHz core; USB role and peripheral mix must be confirmed

📋 Alternatibo na Reference (hindi sa katalogo)

PIC24FJ64GU204-E/SO

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 SOIC-28-300 mil
Same 28-pin SOIC GU205-family footprint and core resources; USB and peripheral configuration differ from GU202

📋 Alternatibo na Reference (hindi sa katalogo)

PIC24FJ64GU203-E/SO

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 SOIC-28-300 mil
Same 28-pin SOIC GU205-family footprint; alternative USB role and peripheral configuration with matching memory and core resources

📋 Alternatibo na Reference (hindi sa katalogo)

PIC24FJ64GU202T-E/SO

✅ Drop-In
📦 SOIC-28-300 mil
Same electrical configuration and 28-pin SOIC footprint as PIC24FJ64GU202-E/SO; T identifies the tube packing option

📋 Alternatibo na Reference (hindi sa katalogo)

PIC24FJ64GU202-E/SO Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 16-bit RISC microcontroller
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Program Memory 64 KB ECC Flash
Program Memory Organization 22K x 24 words
Data Memory 8 KB RAM
USB Version USB 2.0 Full Speed
USB Operating Roles Host, Device, and OTG
UART Modules 2
SPI Modules 2
I2C Modules 2
Core Independent Peripherals Yes, CIPs
Low-Power Technology XLP
Sleep Current Down to a few hundreds of nA
Independent Low-Power Timer Oscillator 32 kHz
I/O Pin Current 18 mA sink and 18 mA source on all I/O pins
Packhaging SOIC-28-300 mil
Bilang ng Pin 28
Uri ng Pagpapasok Surface Mount
Process Technology CMOS
Temperature Grade Extended (E-temp)
Packing Tube
Tindminan RoHS Compliant
DMA Controller Two-channel

Gabay sa Pin Configuration ng PIC24FJ64GU202-E/SO soic-28-300 mil

Pin configuration para sa PIC24FJ64GU202-E/SO (soic-28-300 mil package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng soic-28-300 mil package para sa PIC24FJ64GU202-E/SO

Wala ng detalyadong pinout data na magagamit para sa PIC24FJ64GU202-E/SO.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PIC24FJ64GU202-E/SO ay nararapat para sa 6 aplikasyons: USB Data Acquisition and Sensor Hub, USB Serial Adapter and Configuration Interface, Industrial Control Panel and HMI Interface, Portable Medical Monitoring Instrument, USB Programmable Control and Test Fixture, Low-Power USB Connected Sensor Node.

🧩

USB Data Acquisition and Sensor Hub

The PIC24FJ64GU202-E/SO fits a USB-connected measurement hub that gathers readings from external sensors and forwards them to a host computer. Its Full Speed USB 2.0 device capability provides the communication path, while two I2C and two SPI interfaces can connect mixed sensor types without requiring additional serial controllers. The 16-bit CPU at 32 MHz and 16 MIPS has ample throughput for scaling, filtering, and packet preparation, and the 8 KB SRAM supports working buffers. The 28-pin SOIC footprint also keeps the assembly compatible with conventional leaded-board manufacturing for industrial instrumentation.

🖥️

USB Serial Adapter and Configuration Interface

The PIC24FJ64GU202-E/SO can implement a compact USB-to-serial or configuration interface for an embedded control system. Two UART modules allow two asynchronous serial ports, while the USB module operates as a Full Speed USB device for command exchange with a host. The 16-bit architecture and 32 MHz operating speed support protocol conversion, buffering, and background servicing, and 64 KB of ECC flash provides room for a bootloader and application firmware. Use the GU202 only where the required USB descriptors and serial levels match the target system, since the family contains variants with different USB roles.

🏭

Industrial Control Panel and HMI Interface

The PIC24FJ64GU202-E/SO suits an industrial control panel that communicates with a host over USB while handling local switches, indicators, and sensors. Its 2 UART, 2 SPI, and 2 I2C interfaces allow the controller to connect serial controllers, flash storage, displays, and sensor devices while the main core performs control logic. The E temperature-grade ordering option is appropriate for designs intended to operate across an extended commercial or industrial temperature range. XLP low-power capability is also useful in panels that spend part of their operating cycle idle between operator interactions.

💊

Portable Medical Monitoring Instrument

The PIC24FJ64GU202-E/SO can serve as the control processor in a portable medical monitoring instrument that records sensor information and transfers it through USB. Its 16-bit RISC core and 32 MHz maximum frequency support signal conditioning, event detection, and display updates, while ECC flash supports dependable firmware retention. Two SPI interfaces can serve analog front ends or storage devices, and two I2C controllers can handle sensors and configuration devices. For medical use, validate the complete signal chain, isolation strategy, firmware risk controls, and regulatory obligations rather than relying on MCU qualification alone.

🔧

USB Programmable Control and Test Fixture

The PIC24FJ64GU202-E/SO is well suited to a USB-programmable test fixture that controls relays, indicators, and instrumentation while logging results on a host computer. Full Speed USB 2.0 provides a direct peripheral connection, and the two UART modules can support legacy test equipment alongside the USB link. The two-channel DMA controller can reduce CPU involvement in data movement, while the independent 32 kHz timer oscillator provides a low-power timing reference for long-duration tests. Its 28-pin SOIC package simplifies assembly into fixture boards and supports serviceable through-hole-style layouts.

🔋

Low-Power USB Connected Sensor Node

The PIC24FJ64GU202-E/SO supports a low-power USB-connected sensor node that wakes to acquire a reading, transfers data, and then returns to a reduced-power state. Microchip describes GU2-family sleep current down to a few hundreds of nanamps, making the XLP architecture useful for duty-cycled sensing. The two-channel DMA controller and core independent peripherals can move data and execute timing functions with limited core involvement. USB enumeration behavior, wake-up support, and current measurements must be verified for the exact firmware and operating mode before estimating battery life.

Buod ng mga Inirekomendang Produkto

PIC24FJ64GU202-I/SO Microchip Technology Ginagamit sa: USB Data Acquisition and Sensor Hub, Industrial Control Panel and HMI Interface, Portable Medical Monitoring Instrument, Low-Power USB Connected Sensor Node PIC24FJ64GU205-E/SO Related 28-pin family member Ginagamit sa: USB Data Acquisition and Sensor Hub, Low-Power USB Connected Sensor Node PIC24FJ64GU202T-E/SO Tube-packed configuration of the same MCU Ginagamit sa: USB Serial Adapter and Configuration Interface PIC24FJ64GU203-E/SO Related 28-pin family member Ginagamit sa: USB Programmable Control and Test Fixture PIC24FJ64GU204-E/SO Related 28-pin family member Ginagamit sa: USB Programmable Control and Test Fixture
What are the key specifications of PIC24FJ64GU202-E/SO that engineers should know?
The PIC24FJ64GU202-E/SO is a 16-bit RISC microcontroller that operates at up to 32 MHz and delivers 16 MIPS. It provides 64 KB of ECC flash, 8 KB of SRAM, Full Speed USB 2.0 with host, device, and OTG roles, two UART modules, two SPI modules, and two I2C modules. According to the Microchip PIC24FJ64GU202 product page and the PIC24FJ64GU205 family datasheet, the device also includes core independent peripherals, XLP low-power functions, and a 32 kHz independent timer oscillator in a 28-pin SOIC package.
What is the operating voltage range of PIC24FJ64GU202-E/SO?
The PIC24FJ64GU202-E/SO is designed for the supply range specified by Microchip for the PIC24FJ64GU205 family. The exact minimum and maximum operating voltages are not stated on the manufacturer product-page excerpt, so consult the family datasheet's electrical characteristics before selecting the system supply rail. In many PIC24FJ designs, the USB and core supply domains may have separate voltage requirements, making the pin-specific power connection table essential for a correct PCB design.
How much flash memory and RAM does PIC24FJ64GU202-E/SO have?
The PIC24FJ64GU202-E/SO contains 64 KB of ECC flash program memory and 8 KB of SRAM. The Microchip product page describes the GU2 family as offering up to 64 KB of ECC Flash and 8 KB of RAM, while DigiKey identifies the flash organization as 22K x 24 words. ECC flash is useful when firmware integrity must be maintained over long service periods because detected single-bit memory errors can be corrected by the device.
Does PIC24FJ64GU202-E/SO support USB host, device, and OTG?
Yes, the PIC24FJ64GU202-E/SO supports Full Speed USB 2.0 host, device, and OTG operation. According to the Microchip PIC24FJ64GU202 family description, the GU2 family combines Full Speed USB connectivity with core independent peripherals and XLP low-power operation. Practical implementation still requires correct USB data-line routing, suitable series impedance, the required decoupling, and compliance with the electrical requirements in the family datasheet.
Where can I download the PIC24FJ64GU202-E/SO datasheet PDF?
The official Microchip family datasheet is available at https://ww1.microchip.com/downloads/aemDocuments/documents/MCU16/ProductDocuments/DataSheets/PIC24FJ64GU205_Family_Datasheet_DS30010221.pdf, and the device-specific product page is available at https://www.microchip.com/en-us/product/PIC24FJ64GU202. Use the product page for ordering options and the family datasheet for pin descriptions, electrical characteristics, timing, USB implementation, and peripheral details. The Octopart datasheet listing also links to available PDF documents.
Where can I find the PIC24FJ64GU202-E/SO pinout?
The pin configuration for the PIC24FJ64GU202-E/SO is published in the PIC24FJ64GU205 family datasheet under the pin-description and pinout sections. The device is a 28-pin SOIC-300 mil part with mixed signal, communications, power, ground, and USB functions. Use the datasheet pin table for the authoritative signal names because several pins can be multiplexed, and check the package drawing for the physical dimensions and pin-1 orientation.
What can replace the PIC24FJ64GU202-E/SO?
The closest drop-in options are the PIC24FJ64GU202-I/SO and other pin-compatible 28-pin SOIC members of the PIC24FJ64GU205 family. The PIC24FJ64GU202-I/SO keeps the same 64 KB ECC flash, 8 KB RAM, 32 MHz core, USB 2.0 connectivity, and 28-pin SOIC footprint, with a different temperature-grade suffix. For any replacement, verify the exact USB role set, peripheral mix, pin multiplexing, and errata requirements in the manufacturer documentation.
Is PIC24FJ64GU202-I/SO a drop-in replacement for PIC24FJ64GU202-E/SO?
The PIC24FJ64GU202-I/SO is a strong drop-in candidate because it retains the 28-pin SOIC footprint, 16-bit 32 MHz core, 64 KB ECC flash, 8 KB RAM, and USB connectivity. Its distinguishing characteristic is the temperature-grade suffix rather than the logic, memory, or pin arrangement. DigiKey identifies it as a 16-bit, 32 MHz, 64 KB flash, 28-SOIC PIC24FJ microcontroller, supporting direct PCB reuse with temperature-range review.
When should I choose PIC24FJ64GU202-E/SO over a similar PIC24FJ member?
Choose the PIC24FJ64GU202-E/SO when the design needs Full Speed USB 2.0, a 16-bit PIC24 core, 64 KB of ECC flash, 8 KB of RAM, and a 28-pin SOIC footprint at an extended temperature grade. A 40-pin or larger package may be preferable when additional I/O or analog channels are required, while a smaller-pin member may be sufficient if USB and the exact peripheral mix are unnecessary. Compare the family pinout and peripheral tables before making the final selection.
PIC24FJ64GU202-E/SO vs PIC24FJ64GU205-E/SO: which one is better for USB designs?
Both devices belong to the PIC24FJ64GU205 family and share the 28-pin SOIC format used by the GU202, so the decisive factors are USB role support, exposed peripherals, and application requirements. The GU202 is specifically identified with Full Speed USB host, device, and OTG capability. Choose it when all three USB roles or its exact peripheral set are required; use the GU205 when its documented USB and peripheral configuration satisfies the design.
What is the best Microchip equivalent for PIC24FJ64GU202-E/SO?
The best Microchip equivalent is the closest pin-compatible member of the PIC24FJ64GU205 family that preserves the required USB roles, flash capacity, RAM capacity, and 28-pin SOIC assignment. The PIC24FJ64GU202-I/SO is a direct temperature-grade variant, while the GU205 family datasheet provides the common package and peripheral reference. The exact equivalent must be qualified against pin multiplexing, USB connectivity, peripheral errata, and operating-temperature requirements.
Is PIC24FJ64GU202-E/SO suitable for industrial and medical embedded systems?
The PIC24FJ64GU202-E/SO is suitable for industrial and medical embedded-control prototypes when the required functions are covered by its USB, communications, and low-power resources. Its 16-bit core, ECC flash, XLP operation, and extended-temperature ordering suffix support designs that need reliability and power efficiency. Medical or safety-critical designs still require application-specific risk analysis, validation, and confirmation of every applicable regulatory and quality requirement.
How much current does PIC24FJ64GU202-E/SO consume?
Microchip describes the PIC24FJ GU2 family's sleep current as down to a few hundreds of nanamps while retaining core functionality. The family datasheet also specifies 18 mA sink and 18 mA source capability on all I/O pins. Actual system consumption depends on clock selection, active peripherals, USB operating state, I/O loading, and the installed firmware, so use the datasheet's operating-current tables for the selected clock and mode.
Where can I buy PIC24FJ64GU202-E/SO and what is its lead time?
Use the Request a Quote form on this page to request current availability, volume pricing, and lead time for the PIC24FJ64GU202-E/SO. The exact package and temperature suffix should be confirmed on the quotation because related members use the same base MPN with different grade and packing codes. Microchip's part-selection and authorized-channel information can also be used to identify regional authorized distributors.
What is the price of PIC24FJ64GU202-E/SO?
Current unit pricing and volume breaks for the PIC24FJ64GU202-E/SO are provided through the Request a Quote form on this page. Quote requests should identify the exact MPN, including the E temperature-grade suffix and SO package designation, plus the required order quantity and delivery destination. Distributor listing pages can be used to cross-check market availability, but the quote form is the appropriate channel for your specific purchasing volume.
Is PIC24FJ64GU202-E/SO in stock and what is its minimum order quantity?
Live stock and minimum order quantity should be confirmed through the Request a Quote form on this page. The part is identified as a tube-packed 28-pin SOIC device, and the same base-family ordering codes are distributed with different temperature-grade and packing suffixes. Provide the target quantity, schedule, and shipment country with the request so the current channel can confirm the appropriate configuration and delivery commitment.
What peripherals does PIC24FJ64GU202-E/SO provide for embedded control?
The PIC24FJ64GU202-E/SO provides two UART modules, two SPI modules, two I2C modules, a two-channel DMA controller, core independent peripherals, and Full Speed USB 2.0. The family also includes an independent low-power 32 kHz timer oscillator and a 16-bit Timer1 that can use an external crystal and trigger an analog conversion. These resources support sensor acquisition, display and storage interfaces, timekeeping, and USB data transfer without excessive CPU overhead.
How should USB and analog signals be routed around PIC24FJ64GU202-E/SO?
Route the USB differential pair as a controlled-impedance pair with the length and spacing recommended in the family datasheet, and keep the USB interface away from high-current switching nodes and analog sources. Place the required bypass capacitors near their associated supply pins, and separate sensitive analog inputs from USB and digital return currents. Because the 28-pin package is pin-constrained, confirm the available USB and analog pin multiplexing before committing the board layout.

Impormasyon ng Talumpati sa Engineering for PIC24FJ64GU202-E/SO — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the PIC24FJ64GU202-E/SO when a design needs a 16-bit PIC24 core, 32 MHz performance, 64 KB of ECC flash, 8 KB of RAM, and Full Speed USB 2.0 in a 28-pin SOIC package. Select the PIC24FJ64GU202-I/SO when the same electrical configuration is required with the I temperature-grade suffix. Consider the GU203, GU204, or GU205 family members only after confirming that their exact USB roles, peripheral assignments, and mixed-signal functions satisfy the design. The GU202 is preferable when host, device, and OTG USB operation is central to the product because that capability is explicitly documented for this member. For new layouts, verify the pin multiplexing, supply requirements, programming pins, and USB routing in the family datasheet before committing to the board.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto PIC24FJ64GU202-I/SO PIC24FJ64GU205-E/SO PIC24FJ64GU204-E/SO PIC24FJ64GU203-E/SO PIC24FJ64GU202T-E/SO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package SOIC-28-300 mil SOIC-28-300 mil SOIC-28-300 mil SOIC-28-300 mil SOIC-28-300 mil SOIC-28-300 mil
CPU Architecture 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Program Memory 64 KB ECC Flash 64 KB ECC Flash 64 KB ECC Flash 64 KB ECC Flash 64 KB ECC Flash 64 KB ECC Flash
Data Memory 8 KB RAM 8 KB RAM 8 KB RAM 8 KB RAM 8 KB RAM 8 KB RAM
Temperature Designation E-temp I-temp E-temp E-temp E-temp E-temp

Pangunahing mga Pagkakaiba

  • Full USB role flexibility in a 28-pin package (kumpara saPIC24FJ64GU202-I/SO)
  • Extended-temperature ordering option (kumpara saPIC24FJ64GU202-I/SO)
  • 16-bit performance with ECC program memory (kumpara saPIC24FJ64GU205-E/SO)
  • Broad serial connectivity without external controllers (kumpara saPIC24FJ64GU204-E/SO)

Talaan ng Disenyo

Route the Full Speed USB D+ and D- pair as a controlled-impedance differential pair with the spacing and trace length recommended in the family datasheet. Keep the pair away from switching-node copper and high-current return paths, and place USB-supporting bypass components close to their associated supply pins. The 28-pin SOIC footprint has limited routing freedom, so assign USB, crystal, programming, and analog functions during schematic capture before placing the remaining components.

Decouple each required supply domain according to the manufacturer pin-description and electrical-characteristics tables, including any USB-related supply requirements. Confirm the selected regulator's voltage, startup behavior, and current margin against active and sleep operating conditions. XLP can reduce idle demand to a few hundreds of nanamps in suitable modes, but USB attachment, active peripherals, and I/O loading can dominate the real supply current.

Do not interchange the E, I, and T suffixes without checking both electrical grade and packing. The E suffix identifies the extended-temperature ordering option, while T identifies the tube packing option. Also validate the exact USB role set and peripheral multiplexing for related GU205-family members, because matching package dimensions alone does not guarantee that all firmware, USB descriptors, or peripheral assignments remain unchanged.

Keep sensitive analog inputs away from USB data lines and digital return currents, and follow the family reference layout for analog grounding and bypassing. The independent 32 kHz timer oscillator can support low-power timing, but clock-source selection and peripheral clocks must be configured consistently. When using DMA, verify that the source and destination buffers remain within the 8 KB SRAM map and that transfers do not conflict with USB servicing requirements.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The verified product listing identifies the device as RoHS compliant. REACH, halogen-free status, and conflict-minerals status are not stated and remain unknown. AEC-Q100 does not apply to this general-purpose microcontroller.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

PIC24FJ64GU202-E/SO datasheet PIC24FJ64GU202-E/SO pinout PIC24FJ64GU202 datasheet pdf PIC24FJ64GU202-E/SO SOIC-28 PIC24FJ64GU202-E/SO specifications PIC24FJ64GU202-E/SO USB host device OTG PIC24FJ64GU202-E/SO equivalent PIC24FJ64GU202-E/SO replacement PIC24FJ64GU202-E/SO price PIC24FJ64GU202-E/SO stock PIC24FJ64GU202-I/SO vs PIC24FJ64GU202-E/SO Microchip PIC24FJ64GU202 PIC24FJ64GU202 64KB ECC Flash 8KB RAM PIC24FJ64GU202-E/SO programming

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology PIC24FJ64GU202-E/SO PIC24FJ64GU202 PIC24FJ64GU202-I/SO PIC24FJ64GU205-E/SO PIC24FJ64GU204-E/SO PIC24FJ64GU203-E/SO PIC24FJ64GU202T-E/SO PIC24FJ GP2/GU2 family PIC24FJ64GU205 family 16-bit RISC microcontroller MCU embedded controller USB 2.0 Full Speed USB host USB device USB OTG XLP low-power technology core independent peripherals CIPs ECC flash memory SRAM UART SPI I2C DMA controller 32 kHz timer oscillator SOIC-28-300 mil surface mount RoHS
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ