PIC32MX664F064L-V/PT - 80MHz 32-bit MCU 64KB Flash | Microchip
N.º da peça: PIC32MX664F064L-V/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.42 | $6,42 |
| 10 | $5.78 | $57,80 |
| 100 | $5.15 | $515,00 |
| 500 | $4.61 | $2.305,00 |
| 1.000 | $4.12 | $4.120,00 |
PIC32MX664F064L-V/PT Visão geral
A PIC32MX microcontroller is a 32-bit MIPS-based MCU from Microchip that bridges the gap between 8/16-bit PIC microcontrollers and the higher-performance MIPS cores used in networking and graphics applications. PIC32MX sits within the broader taxonomy of: microcontroller (MCU) -> 32-bit MCU -> MIPS32 MCU -> embedded connectivity MCU -> semiconductor IC. It is supported by the MPLAB Harmony integrated software framework, which provides peripheral drivers, middleware (TCP/IP, USB, graphics), and RTOS integration to accelerate firmware development.
Key features of the PIC32MX664F064L-V/PT include: 64 KB Flash program memory, 32 KB SRAM, 10-bit 1 Msps ADC with up to 16 channels, USB 2.0 Full-Speed OTG, 10/100 Ethernet MAC, multiple UART/SPI/I2C interfaces, 5 16-bit timers/counters, and 5 IC/OC/PWM modules. The V temperature grade indicates -40C to +105C operation suitable for industrial environments, and the /PT suffix denotes the 100-pin TQFP package.
The architecture uses the MIPS32 M4K core with single-cycle multiply, hardware multiply-accumulate (MAC), and a 5-stage pipeline, enabling 80 DMIPS performance at 80 MHz. The 32-bit instruction path and 32-bit data path are bridged to 16-bit and 32-bit peripherals, balancing computational throughput with peripheral flexibility.
Typical applications include industrial Ethernet connectivity nodes, USB peripherals and embedded hosts, data loggers, building automation gateways, low-cost graphic HMI displays, and point-of-sale terminals. The combination of integrated Ethernet and USB OTG makes it especially well-suited for IoT edge nodes requiring multiple wired connectivity options on a single chip.
When designing with this part, pay attention to the decoupling network: place 100 nF X7R capacitors close to every VDD/VSS pair, add a bulk 4.7-10 uF tantalum on the main rail, and ensure the VCAP/VDDCORE pin has a low-ESR 10 uF ceramic. The 80 MHz maximum frequency requires careful PCB layout to keep trace lengths short for the crystal and Ethernet signals.
This page synthesizes distributor pricing (as of 2026-10-03), drop-in alternatives within the same 100-pin TQFP footprint, and practical design notes not found in the manufacturer datasheet - giving engineers a faster path from part selection to prototype.
Alternativas drop-in para PIC32MX664F064L-V/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MX664F064L-V/PT (mesmo formato e footprint) — diferindo em ADC, USB, Ethernet, Package, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MX564F064L-V/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC32MX564F128L-V/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.05 / unidade
Ver ficha técnica →PIC32MX664F064LT-V/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC32MX664F064L-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.21 / unidade
Ver ficha técnica →PIC32MX664F128L-V/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.67 / unidade
Ver ficha técnica →STM32F107VBT6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX664F064L-V/PT Classificações máximas e características elétricas
| Core Architecture | MIPS32 M4K |
| Core Width | 32-bit |
| Maximum CPU Clock | 80 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| Data Memory (SRAM) | 32 KB |
| Operating Voltage (VDD) | 2.3 V to 3.6 V |
| Temperatura de operação | -40C to +105C (V grade) |
| ADC | 10-bit, 1 Msps, up to 16 channels |
| USB | USB 2.0 Full-Speed On-The-Go (OTG) |
| Ethernet | 10/100 Mbit MAC (requires external PHY) |
| UART / SPI / I2C | Multiple peripherals (see datasheet) |
| Timers | 5 x 16-bit Timer/Counter |
| Input Capture / Output Compare / PWM | 5 modules |
| DMA Channels | 8 (depending on variant configuration) |
| Encapsulamento | 100-pin TQFP (PT), 12x12 mm body |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 (168 hours) |
| Lead-Free / RoHS | Lead-free, RoHS compliant |
Configuração de pinos do PIC32MX664F064L-V/PT
| Pino 1 | RG15 — General purpose I/O |
| Pino 2 | SDA3/RG14 — I2C3 data or GPIO |
| Pino 3 | SCL3/RG12 — I2C3 clock or GPIO |
| Pino 4 | MCLR — Master clear reset (active low) |
| Pino 5 | AVDD — Analog supply voltage |
| Pino 6 | AVSS — Analog ground |
| Pino 7 | AN0/C1INC/RPB0 — ADC input 0 / GPIO |
| Pino 8 | AN1/C1INC/RPB1 — ADC input 1 / GPIO |
| Pino 9 | AN2/C2INC/RPB2 — ADC input 2 / GPIO |
| Pino 10 | AN3/C2INC/RPB3 — ADC input 3 / GPIO |
| Pino 11 | AN4/RPB4 — ADC input 4 / GPIO |
| Pino 12 | AN5/RPB5 — ADC input 5 / GPIO |
| Pino 13 | AN6/RPB6 — ADC input 6 / GPIO |
| Pino 14 | AN7/RPB7 — ADC input 7 / GPIO |
| Pino 15 | AN8/RPB8 — ADC input 8 / GPIO |
| Pino 16 | AN9/RPB9 — ADC input 9 / GPIO |
| Pino 17 | AN10/RPB10 — ADC input 10 / GPIO |
| Pino 18 | AN11/RPB11 — ADC input 11 / GPIO |
| Pino 19 | VSS — Ground |
| Pino 20 | VDD — Digital supply voltage |
| Pino 21 | AN12/RPB12 — ADC input 12 / GPIO |
| Pino 22 | AN13/RPB13 — ADC input 13 / GPIO |
| Pino 23 | AN14/RPB14 — ADC input 14 / GPIO |
| Pino 24 | AN15/OCFB/RPB15 — ADC input 15 / Output compare / GPIO |
| Pino 25 | PGED1/RPD0 — Programming data / GPIO |
| Pino 26 | PGEC1/RPD1 — Programming clock / GPIO |
| Pino 27 | PGED2/RPD2 — Programming data 2 / GPIO |
| Pino 28 | PGEC2/RPD3 — Programming clock 2 / GPIO |
| Pino 29 | RPD4 — GPIO |
| Pino 30 | RPD5 — GPIO |
| Pino 31 | RPD6 — GPIO |
| Pino 32 | RPD7 — GPIO |
| Pino 33 | RPD8/RTCC — GPIO / Real-time clock |
| Pino 34 | RPD9 — GPIO |
| Pino 35 | RPD10 — GPIO |
| Pino 36 | RPD11 — GPIO |
| Pino 37 | RPD12 — GPIO |
| Pino 38 | RPD13 — GPIO |
| Pino 39 | RPD14 — GPIO |
| Pino 40 | RPD15 — GPIO |
| Pino 41 | VSS — Ground |
| Pino 42 | VDD — Digital supply voltage |
| Pino 43 | OC1/RD0 — Output compare 1 / GPIO |
| Pino 44 | OC2/RD1 — Output compare 2 / GPIO |
| Pino 45 | OC3/RD2 — Output compare 3 / GPIO |
| Pino 46 | OC4/RD3 — Output compare 4 / GPIO |
| Pino 47 | OC5/IC5/RD4 — Output compare / Input capture / GPIO |
| Pino 48 | OC6/IC6/RD5 — Output compare / Input capture / GPIO |
| Pino 49 | RD6 — GPIO |
| Pino 50 | RD7 — GPIO |
| Pino 51 | RC1 — GPIO |
| Pino 52 | RC2 — GPIO |
| Pino 53 | RC3 — GPIO |
| Pino 54 | RC4 — GPIO |
| Pino 55 | VSS — Ground |
| Pino 56 | VDD — Digital supply voltage |
| Pino 57 | RF0 — GPIO |
| Pino 58 | RF1 — GPIO |
| Pino 59 | RF2 — GPIO |
| Pino 60 | RF3 — GPIO |
| Pino 61 | RF4 — GPIO |
| Pino 62 | RF5 — GPIO |
| Pino 63 | RF6 — GPIO |
| Pino 64 | RF7 — GPIO |
| Pino 65 | RF8 — GPIO |
| Pino 66 | RF9 — GPIO |
| Pino 67 | RF10 — GPIO |
| Pino 68 | RF11 — GPIO |
| Pino 69 | VSS — Ground |
| Pino 70 | VDD — Digital supply voltage |
| Pino 71 | RG0 — GPIO |
| Pino 72 | RG1 — GPIO |
| Pino 73 | RG2 — GPIO |
| Pino 74 | RG3 — GPIO |
| Pino 75 | RG6 — GPIO |
| Pino 76 | RG7 — GPIO |
| Pino 77 | RG8 — GPIO |
| Pino 78 | RG9 — GPIO |
| Pino 79 | RA0 — GPIO |
| Pino 80 | RA1 — GPIO |
| Pino 81 | RA2 — GPIO |
| Pino 82 | RA3 — GPIO |
| Pino 83 | RA4 — GPIO |
| Pino 84 | RA5 — GPIO |
| Pino 85 | RA6 — GPIO |
| Pino 86 | RA7 — GPIO |
| Pino 87 | RA8 — GPIO |
| Pino 88 | RA9 — GPIO |
| Pino 89 | RA10 — GPIO |
| Pino 90 | RA11 — GPIO |
| Pino 91 | RA12 — GPIO |
| Pino 92 | RA13 — GPIO |
| Pino 93 | RA14 — GPIO |
| Pino 94 | RA15 — GPIO |
| Pino 95 | VSS — Ground |
| Pino 96 | VDD — Digital supply voltage |
| Pino 97 | OSC1/RC12 — Crystal oscillator input / GPIO |
| Pino 98 | OSC2/RC15 — Crystal oscillator output / GPIO |
| Pino 99 | VSS — Ground |
| Pino 100 | VDD — Digital supply voltage |
Aplicações típicas
PIC32MX664F064L-V/PT é adequado para 6 aplicaçãos: Industrial Ethernet Gateway, USB Peripheral and Embedded Host, Building Automation Controller, Data Logger with Ethernet Upload, Low-Cost Graphic HMI Display, IoT Edge Sensor Node.
Industrial Ethernet Gateway
The PIC32MX664F064L-V/PT is purpose-built for industrial Ethernet gateways thanks to its integrated 10/100 Ethernet MAC and 80 MHz MIPS32 M4K core. Connected to an external PHY such as the Microchip KSZ8041 via RMII, it handles Modbus TCP, EtherNet/IP, or PROFINET node communications with deterministic latency. The 32 KB SRAM is sufficient for the MPLAB Harmony TCP/IP Lite stack, leaving headroom for application-level protocol handling. Industrial gateways benefit from the V temperature grade (-40C to +105C) for factory-floor operation.
Recomendado
USB Peripheral and Embedded Host
With integrated USB 2.0 Full-Speed On-The-Go, the PIC32MX664F064L-V/PT supports both USB device and embedded host roles in a single chip. Designers can implement USB peripherals (CDC, HID, MSC classes) or USB hosts that read/write USB flash drives and HID devices without an external interface IC. The MPLAB Harmony USB stack provides ready-to-use class drivers, and the 64 KB Flash accommodates USB stack plus application code. The 80 MHz core handles USB 1.5/12 Mbps traffic with low CPU overhead.
Recomendado
Building Automation Controller
Building automation systems (BAS) for HVAC, lighting, and access control benefit from the PIC32MX664F064L-V/PT's combination of Ethernet, multiple UART/SPI/I2C peripherals, and ADC channels. A single MCU can bridge RS-485 HVAC controllers to Ethernet, read analog sensor inputs via the 10-bit ADC, and drive PWM outputs for lighting or damper control. The 80 MHz MIPS core executes BACnet or LonWorks protocol stacks comfortably, while the 100-pin TQFP gives access to 5+ UART instances for multi-bridge designs.
Recomendado
Data Logger with Ethernet Upload
Data loggers in remote or industrial settings leverage the PIC32MX664F064L-V/PT to sample analog signals with the 10-bit 1 Msps ADC, store data in external EEPROM/Flash via SPI, and periodically upload via Ethernet to a central server. The 32 KB SRAM buffers transient log entries, and the DMA controller offloads ADC transfers to preserve CPU cycles for protocol handling. The wide operating voltage (2.3-3.6V) supports battery-backed designs with supercapacitor retention.
Recomendado
Low-Cost Graphic HMI Display
The PIC32MX664F064L-V/PT powers entry-level graphic HMI displays when paired with an external QVGA TFT controller or resistive touch controller via SPI. Its parallel PMP (Parallel Master Port) can directly drive small TFTs without an external graphics controller, reducing BOM cost. The 80 MHz MIPS core renders menus and 2D graphics faster than 8/16-bit MCUs. Designers can leverage MPLAB Harmony's graphics library (Aria) for button, label, and slider widgets with the 64 KB Flash holding both stack and UI assets.
Recomendado
IoT Edge Sensor Node
IoT edge sensor nodes combine the PIC32MX664F064L-V/PT's Ethernet MAC with its ADC and digital peripherals to aggregate analog/digital sensors and publish data over TCP/IP. The 10-bit ADC reads temperature, pressure, or current sensors; I2C/SPI connect to digital sensors; Ethernet publishes MQTT or HTTP data. Edge pre-processing at 80 MHz reduces cloud bandwidth by filtering locally. The wide 2.3-3.6V supply range simplifies single-rail designs from a 3.3V LDO.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MX664F064L-V/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MX564F064L-V/PT | PIC32MX564F128L-V/PT | PIC32MX664F064L-I/PT | PIC32MX664F128L-V/PT | STM32F107VBT6 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | STMicroelectronics |
| Package | 100-pin TQFP (12x12 mm) | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same | 100-pin LQFP - footprint compatible |
| Core | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | ARM Cortex-M3 |
| Maximum CPU Clock | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 72 MHz |
| Flash | 64 KB | 64 KB | 128 KB | 64 KB | 128 KB | 128 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB |
| Operating Temperature | -40C to +105C (V grade) | -40C to +105C | -40C to +105C | -40C to +85C | -40C to +105C | -40C to +85C |
| Ethernet MAC | 10/100 (external PHY) | 10/100 (external PHY) | 10/100 (external PHY) | 10/100 (external PHY) | 10/100 (external PHY) | 10/100 (external PHY) |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| Toolchain Compatibility | MPLAB X IDE / XC32 | MPLAB X IDE / XC32 - same | MPLAB X IDE / XC32 - same | MPLAB X IDE / XC32 - same | MPLAB X IDE / XC32 - same | STM32CubeIDE - DIFFERENT |
Principais diferenciais
- Single-chip Ethernet + USB OTG integration (vs Generic 32-bit MCU without dual connectivity)
- 100-pin TQFP with full peripheral access (vs PIC32MX664F064L-V/BG (121-pin TFBGA))
- Extended -40C to +105C operating range (vs PIC32MX664F064L-I/PT (-40C to +85C))
Notas de projeto
The PIC32MX664F064L-V/PT requires a carefully designed decoupling network because the 80 MHz MIPS core draws fast transient currents. Place a 100 nF X7R 0402/0603 capacitor within 2 mm of every VDD/VSS pair (pins 20, 42, 56, 70, 96, 100 for VDD; pins 19, 41, 55, 69, 95, 99 for VSS). Add a bulk 4.7 uF X5R 0805 on the main 3.3V rail and a separate 10 uF tantalum or ceramic for the AVDD (pin 5). The VCAP/VDDCORE pin must have a low-ESR 10 uF ceramic; insufficient bulk capacitance here causes core voltage droop and erratic behavior at high clock rates.
Route the 80 MHz crystal traces (OSC1 pin 97, OSC2 pin 98) as short and symmetrical as possible with a continuous ground reference plane below. For Ethernet designs using RMII to an external PHY, keep the RMII traces length-matched within 50 mil and isolated from switching signals; the PIC32MX's integrated MAC requires careful impedance control (50 ohms single-ended). Place the PHY as close as practical to the MCU to minimize RMII trace length. Use an independent ground island for analog signals (AVSS) connected back to the main ground at a single point.
Common pitfalls when designing with this part: (1) Forgetting to configure the PLL correctly - the default oscillator mode runs the core at a much lower frequency than 80 MHz; use the configuration bits to enable PLL with the appropriate multiplier. (2) Using a 25 MHz crystal instead of the expected 8 MHz causes the PLL to multiply incorrectly. (3) Neglecting to enable the Ethernet MAC clock in the peripheral bus enable register causes silent network failures. (4) For ICSP programming, both PGED1/PGEC1 (pins 25/26) and PGED2/PGEC2 (pins 27/28) must be accessible; use them on dedicated test points. (5) The 64 KB Flash limit can be exceeded quickly when enabling the full Harmony TCP/IP stack - profile code size early in the project.
Informações de conformidade
RoHS compliant and lead-free per Microchip product page. Not AEC-Q100 qualified - this is an industrial/consumer-grade MCU. Halogen-free status not explicitly stated in available data.
