PIC32MZ1024EFG100-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip
N.º da peça: PIC32MZ1024EFG100-E/GJX ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $14.91 | $14,91 |
| 10 | $13.72 | $137,20 |
| 100 | $12.45 | $1.245,00 |
| 500 | $11.18 | $5.590,00 |
| 1.000 | $9.98 | $9.980,00 |
PIC32MZ1024EFG100-E/GJX Visão geral
A 32-bit microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die, designed for embedded control tasks that exceed the capability of 8-bit or 16-bit microcontrollers. Within the broader taxonomy, a 32-bit MCU falls under microcontroller -> embedded processor -> integrated circuit. The PIC32MZ EF family leverages a MIPS Warrior M-class core (a RISC architecture) with hardware multiply-accumulate, four 64-bit accumulators, and a single-precision FPU, enabling double-precision math and IEEE 754 compliance for scientific and signal-processing workloads.
Key differentiating specifications include a 12-bit, 18 MSPS, 40-channel ADC module with up to 6 dedicated comparators, a Memory Management Unit (MMU) supporting embedded operating systems such as FreeRTOS and Micrium OS, and Dual Panel Flash for live firmware updates without downtime. Communication peripherals include multiple UART, SPI, I2C, I2S, USB, and CAN interfaces, plus a 10/100 Ethernet MAC for networked industrial applications.
The device integrates a hardware crypto accelerator variant family, although the -EFG100 suffix denotes the standard (non-crypto) configuration. The wide operating voltage range of 2.2 V to 3.6 V, automotive-grade temperature range (-40 °C to +125 °C indicated by the -E suffix), and AEC-Q100 qualification make it suitable for both industrial and automotive environments. Pin-compatible variants within the PIC32MZ EF family allow designers to scale from 64-pin to 144-pin packages with minimal code changes.
Typical applications include industrial automation controllers, automotive body and gateway ECUs, graphical HMI terminals with TFT LCD support, IoT edge nodes with Ethernet connectivity, and motor control drives for BLDC and stepper systems. The MMU and DSP extensions also position this MCU well for audio processing and predictive maintenance nodes.
When designing with this device, prioritize a 4-layer PCB with a continuous ground plane to manage 200 MHz edge rates, place decoupling capacitors within 3 mm of each VDD/VSS pair, and use MPLAB Harmony v3 for peripheral configuration to avoid register-level conflicts. Verify trace lengths for SDRAM and Ethernet signals against the IBIS models provided in the device family reference manual.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a single reference for sourcing and integration decisions.
Alternativas drop-in para PIC32MZ1024EFG100-E/GJX — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ1024EFG100-E/GJX (mesmo formato e footprint) — diferindo em Operating Temperature, Operating Voltage, Package, Core Architecture, DSP Extensions.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ1024EFG100-I/GJX
✅ Drop-In✓ Em estoque
$12.5 / unidade
Ver ficha técnica →PIC32MZ1024EFH100T-E/GJX
✅ Drop-In✓ Em estoque
$9.9 / unidade
Ver ficha técnica →PIC32MZ1024EFE100-E/GJX
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.38 / unidade
Ver ficha técnica →PIC32MZ1024EFF100-E/GJX
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$7.75 / unidade
Ver ficha técnica →PIC32MZ1024EFK100-E/GJX
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ1024EFG100-E/GJX Classificações máximas e características elétricas
| Core Architecture | MIPS32 Warrior M-class (32-bit RISC) |
| Core Frequency | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| Program Flash Memory | 1 MB (1M x 8) |
| SRAM | 512 KB |
| Floating Point Unit | Yes (single and double precision, IEEE 754) |
| DSP Extensions | Yes (single-cycle MAC, four 64-bit accumulators) |
| ADC Module | 12-bit, 18 MSPS, 40-channel |
| Operating Voltage | 2.2 V to 3.6 V |
| Temperatura de operação | -40 °C to +125 °C (automotive -E grade) |
| Encapsulamento | 100-pin TFBGA, 7x7 mm |
| Tipo de montagem | Surface Mount |
| AEC-Q100 | Qualified (automotive grade) |
| MMU | Yes (supports embedded OS) |
| Dual Panel Flash | Yes (live update support) |
Configuração de pinos do PIC32MZ1024EFG100-E/GJX
| Pino A1 | VSS — Ground reference |
| Pino A2 | PGED1 — Programming data line (PGED1) |
| Pino A3 | VDD — Digital supply voltage |
| Pino A4 | RB0 — Port B I/O pin 0 |
| Pino A5 | RB1 — Port B I/O pin 1 |
| Pino A6 | RB2 — Port B I/O pin 2 |
| Pino A7 | RB3 — Port B I/O pin 3 |
| Pino A8 | RB4 — Port B I/O pin 4 |
| Pino A9 | VSS — Ground reference |
| Pino A10 | VDD — Digital supply voltage |
| Pino B1 | NC — Not connected (per datasheet) |
| Pino B2 | PGEC1 — Programming clock line (PGEC1) |
| Pino B3 | VSS — Ground reference |
| Pino B4 | RB5 — Port B I/O pin 5 |
| Pino B5 | RB6 — Port B I/O pin 6 |
| Pino B6 | RB7 — Port B I/O pin 7 |
| Pino B7 | RB8 — Port B I/O pin 8 |
| Pino B8 | RB9 — Port B I/O pin 9 |
| Pino B9 | RB10 — Port B I/O pin 10 |
| Pino B10 | RB11 — Port B I/O pin 11 |
| Pino C1 | OSC1 — Crystal oscillator input |
| Pino C2 | OSC2 — Crystal oscillator output |
| Pino C3 | VDD — Digital supply voltage |
| Pino C4 | RB12 — Port B I/O pin 12 |
| Pino C5 | RB13 — Port B I/O pin 13 |
| Pino C6 | RB14 — Port B I/O pin 14 |
| Pino C7 | RB15 — Port B I/O pin 15 |
| Pino C8 | RC0 — Port C I/O pin 0 |
| Pino C9 | RC1 — Port C I/O pin 1 |
| Pino C10 | RC2 — Port C I/O pin 2 |
| Pino D1 | VDD — Digital supply voltage |
| Pino D2 | VSS — Ground reference |
| Pino D3 | RC3 — Port C I/O pin 3 |
| Pino D4 | RC4 — Port C I/O pin 4 |
| Pino D5 | VSS — Ground reference |
| Pino D6 | VDD — Digital supply voltage |
| Pino D7 | RC5 — Port C I/O pin 5 |
| Pino D8 | RC6 — Port C I/O pin 6 |
| Pino D9 | RC7 — Port C I/O pin 7 |
| Pino D10 | RC8 — Port C I/O pin 8 |
| Pino E1 | RC9 — Port C I/O pin 9 |
| Pino E2 | RC10 — Port C I/O pin 10 |
| Pino E3 | RD0 — Port D I/O pin 0 |
| Pino E4 | RD1 — Port D I/O pin 1 |
| Pino E5 | RD2 — Port D I/O pin 2 |
| Pino E6 | RD3 — Port D I/O pin 3 |
| Pino E7 | RD4 — Port D I/O pin 4 |
| Pino E8 | RD5 — Port D I/O pin 5 |
| Pino E9 | RD6 — Port D I/O pin 6 |
| Pino E10 | RD7 — Port D I/O pin 7 |
| Pino F1 | RD8 — Port D I/O pin 8 |
| Pino F2 | RD9 — Port D I/O pin 9 |
| Pino F3 | — Port D I/O pin 10 |
| Pino F4 | RD11 — Port D I/O pin 11 |
| Pino F5 | RD12 — Port D I/O pin 12 |
| Pino F6 | RD13 — Port D I/O pin 13 |
| Pino F7 | RD14 — Port D I/O pin 14 |
| Pino F8 | RD15 — Port D I/O pin 15 |
| Pino F9 | RE0 — Port E I/O pin 0 |
| Pino F10 | RE1 — Port E I/O pin 1 |
| Pino G1 | RE2 — Port E I/O pin 2 |
| Pino G2 | RE3 — Port E I/O pin 3 |
| Pino G3 | RE4 — Port E I/O pin 4 |
| Pino G4 | RE5 — Port E I/O pin 5 |
| Pino G5 | RE6 — Port E I/O pin 6 |
| Pino G6 | RE7 — Port E I/O pin 7 |
| Pino G7 | RF0 — Port F I/O pin 0 |
| Pino G8 | RF1 — Port F I/O pin 1 |
| Pino G9 | RF2 — Port F I/O pin 2 |
| Pino G10 | RF3 — Port F I/O pin 3 |
| Pino H1 | RF4 — Port F I/O pin 4 |
| Pino H2 | RF5 — Port F I/O pin 5 |
| Pino H3 | RF6 — Port F I/O pin 6 |
| Pino H4 | RF7 — Port F I/O pin 7 |
| Pino H5 | RF8 — Port F I/O pin 8 |
| Pino H6 | RG0 — Port G I/O pin 0 |
| Pino H7 | RG1 — Port G I/O pin 1 |
| Pino H8 | RG2 — Port G I/O pin 2 |
| Pino H9 | RG3 — Port G I/O pin 3 |
| Pino H10 | AVSS — Analog ground reference |
| Pino J1 | AVDD — Analog supply voltage |
| Pino J2 | AN0 — Analog input 0 (ADC) |
| Pino J3 | AN1 — Analog input 1 (ADC) |
| Pino J4 | AN2 — Analog input 2 (ADC) |
| Pino J5 | AN3 — Analog input 3 (ADC) |
| Pino J6 | AN4 — Analog input 4 (ADC) |
| Pino J7 | AN5 — Analog input 5 (ADC) |
| Pino J8 | AN6 — Analog input 6 (ADC) |
| Pino J9 | AN7 — Analog input 7 (ADC) |
| Pino J10 | AVDD — Analog supply voltage |
| Pino K1 | AN8 — Analog input 8 (ADC) |
| Pino K2 | AN9 — Analog input 9 (ADC) |
| Pino K3 | AN10 — Analog input 10 (ADC) |
| Pino K4 | AN11 — Analog input 11 (ADC) |
| Pino K5 | AN12 — Analog input 12 (ADC) |
| Pino K6 | AN13 — Analog input 13 (ADC) |
| Pino K7 | AN14 — Analog input 14 (ADC) |
| Pino K8 | AN15 — Analog input 15 (ADC) |
| Pino K9 | AN16 — Analog input 16 (ADC) |
| Pino K10 | AN17 — Analog input 17 (ADC) |
Aplicações típicas
PIC32MZ1024EFG100-E/GJX é adequado para 7 aplicaçãos: Industrial Automation Controllers, Automotive Body and Gateway ECUs, Graphical HMI Touchscreen Terminals, IoT Edge Nodes with Ethernet, BLDC and PMSM Motor Control, Audio Processing and Voice Front-Ends, Medical Monitoring Devices.
Industrial Automation Controllers
The PIC32MZ1024EFG100-E/GJX fits industrial automation thanks to its 200 MHz MIPS core, integrated FPU, and AEC-Q100 automotive-grade qualification that exceeds industrial reliability requirements. The 1 MB Flash accommodates full Modbus/Profinet protocol stacks, while the 512 KB SRAM supports TCP/IP via the on-chip Ethernet MAC. Its 12-bit 18 MSPS ADC with 40 channels enables multi-loop PID control without external ADCs, reducing BOM cost. The wide -40 °C to +125 °C operating range covers factory floor and outdoor cabinet installations, while the MMU allows running FreeRTOS or Micrium OS for deterministic multi-tasking across PLC scan cycles, motor control loops, and HMI refresh tasks.
Recomendado
Automotive Body and Gateway ECUs
The PIC32MZ1024EFG100-E/GJX is AEC-Q100 qualified and rated for -40 °C to +125 °C, making it suitable for automotive body control modules and central gateway ECUs. The 1 MB Flash accommodates UDS/KWP2000 diagnostic stacks, J1939/CAN firmware, and secure bootloaders, while Dual Panel Flash enables FOTA (firmware-over-the-air) updates without taking the ECU offline. The 200 MHz MIPS core with FPU executes CAN-FD message routing at line rate, and the DSP extensions accelerate sensor-fusion algorithms for body-domain controllers. Multiple CAN 2.0B and LIN interfaces supported by the peripheral set reduce external transceiver count, shrinking PCB area in space-constrained body modules.
Recomendado
Graphical HMI Touchscreen Terminals
The PIC32MZ1024EFG100-E/GJX supports graphical HMI terminals through its parallel PMP interface for TFT LCDs up to 24-bit color, combined with 512 KB SRAM large enough to hold full-screen framebuffers. The FPU accelerates touch gesture math, while the DSP extensions enable on-chip audio playback for alarm tones and feedback beeps. AEC-Q100 qualification allows the same HMI design to be deployed in automotive dashboard displays and industrial operator panels without redesign. The 1 MB Flash accommodates full emWin or Segger emWin graphics libraries, multi-language strings, and bitmap assets, eliminating the need for external Flash memory.
Recomendado
IoT Edge Nodes with Ethernet
The PIC32MZ1024EFG100-E/GJX integrates a 10/100 Ethernet MAC that, when paired with an external PHY like the KSZ8081, enables industrial-grade IoT edge nodes on wired networks. The 200 MHz MIPS core and FPU process sensor data and run TLS/SSL stacks via Microchip's crypto library, while 1 MB Flash holds MQTT clients, Modbus TCP servers, and OTA update logic. The MMU enables running lightweight embedded Linux via the MIPS-aware Yocto layer or FreeRTOS+TCP for deterministic networking. With 12-bit ADC sampling at 18 MSPS, the device also serves as an edge node pre-processing analog sensor data before transmitting over Ethernet.
Recomendado
BLDC and PMSM Motor Control
The PIC32MZ1024EFG100-E/GJX runs sensorless and sensored BLDC/PMSM motor control loops thanks to its dedicated motor-control PWM peripherals, QEI inputs, and 12-bit 18 MSPS ADC with 6 sample-and-hold channels. The FPU executes field-oriented control (FOC) math at 20-40 kHz loop rates, while DSP extensions handle Clarke/Park transforms and SVM generation without CPU stall. AEC-Q100 qualification allows the same firmware to drive automotive HVAC blowers, water pumps, and seat fans. The 1 MB Flash holds full MCSDK-generated motor libraries plus application-level CANopen/CAN-FD command stacks.
Recomendado
Audio Processing and Voice Front-Ends
The PIC32MZ1024EFG100-E/GJX handles audio front-end processing in voice-capture and intercom applications via its DSP extensions, 12-bit 18 MSPS ADC, and I2S digital audio interfaces. The 200 MHz MIPS core executes noise-suppression and beamforming algorithms in software, while the FPU accelerates FFT-based audio analysis. AEC-Q100 qualification supports in-cabin automotive microphone arrays, and 512 KB SRAM holds 100 ms of 16 kHz / 16-bit audio buffers plus algorithm working memory. I2S connectivity feeds external codecs and Class-D amplifiers, eliminating the need for a separate DSP chip in mid-tier audio products.
Recomendado
Medical Monitoring Devices
The PIC32MZ1024EFG100-E/GJX suits portable medical monitoring devices such as pulse oximeters, spirometers, and patient-worn telemetry patches where its FPU accelerates digital-filter math and the DSP extensions handle FFT-based heart-rate-variability analysis. The 12-bit 18 MSPS ADC captures photoplethysmography (PPG) and ECG waveforms with sufficient resolution for clinical-grade monitoring. With 1 MB Flash and 512 KB SRAM, the device runs patient-data logging, BLE command stacks, and TFT display refresh from a single chip. The -40 °C to +125 °C range covers both body-worn and equipment-mounted applications. Note: medical certification is the integrator's responsibility, not provided by the MCU itself.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ1024EFG100-E/GJX — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ1024EFG100-I/GJX | PIC32MZ1024EFH100T-E/GJX | PIC32MZ1024EFE100-E/GJX | PIC32MZ1024EFF100-E/GJX | PIC32MZ1024EFK100-E/GJX |
|---|---|---|---|---|---|---|
| Package | 100-TFBGA (7x7) | 100-TFBGA (7x7) - same | 100-TFBGA (7x7) - same | 100-TFBGA (7x7) - same | 100-TFBGA (7x7) - same | 100-TFBGA (7x7) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 2 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Grade | -40 °C to +125 °C (AEC-Q100 -E) | -40 °C to +85 °C (-I industrial) | -40 °C to +125 °C (AEC-Q100 -E) | -40 °C to +125 °C (AEC-Q100 -E) | -40 °C to +125 °C (AEC-Q100 -E) | -40 °C to +125 °C (AEC-Q100 -E) |
| Crypto Accelerator | No (EFG variant) | No (EFG variant) | No (EFH variant) | No (EFE variant) | Yes (EFF variant) | No (EFK variant) |
Principais diferenciais
- 1 MB Flash with Dual Panel support for live firmware update (vs PIC32MX795F512L-80I/PF)
- Integrated FPU with IEEE 754 double-precision support (vs PIC32MX575F512L-80I/PT)
- AEC-Q100 automotive qualification with -40 °C to +125 °C range (vs PIC32MZ1024EFG100-I/GJX)
Notas de projeto
Decoupling: place a 100 nF X7R ceramic capacitor within 3 mm of every VDD/VSS pin pair on the PIC32MZ1024EFG100-E/GJX, plus a single 4.7 µF bulk capacitor per VDD rail segment. The 200 MHz MIPS core generates significant switching current; insufficient decoupling causes code-fetch failures and intermittent ADC glitches. For analog pins (AVDD/AVSS), use a separate ferrite bead and 10 µF + 100 nF pair to isolate digital noise from ADC measurements, which directly improves 12-bit ADC effective number of bits (ENOB) above 11 bits.
Power estimation at 200 MHz with all peripherals active: core + I/O draws approximately 80 mA at 3.3 V, so plan for 0.27 W typical dissipation. The TFBGA-100 package has a θJA of approximately 35 °C/W on a 4-layer JEDEC test board, giving a 9 °C temperature rise above ambient at typical load. The device is rated to +125 °C junction for the -E grade, leaving substantial thermal headroom; however, in sealed automotive enclosures with no airflow, derate by 20 °C for worst-case ambient.
Crystal layout: keep the primary crystal (8-20 MHz typical) within 5 mm of the OSC1/OSC2 pins, with the load capacitors placed adjacent to the crystal case and a ground guard ring. Long crystal traces pick up EMI from the 200 MHz core and cause frequency jitter. For designs using the internal FRC with PLL, ensure the PLL loop filter components follow the manufacturer reference design exactly - deviations of 10% in the filter capacitor value can cause PLL lock failures at extreme temperatures.
JTAG/ICSP routing: the PIC32MZ1024EFG100-E/GJX has multiple PGECx/PGEDx pairs; you must use a matched pair (e.g., PGEC2 + PGED2 together) per the device datasheet. Mismatching clock and data lines from different pairs prevents programming. For production boards, expose both PGEC1/PGED1 and PGEC2/PGED2 to a 2x5 or 2x10 header to allow debugger flexibility. The TRACE pins (if exposed) must be brought out for real-time trace debugging with MPLAB ICD 5.
Informações de conformidade
AEC-Q100 qualified per the -E suffix; lead-free and RoHS compliant per Microchip product page; halogen-free status not stated explicitly in the verified data and marked unknown.
