R5F104LGGFB#30 - 32MHz 128KB 16-Bit MCU | Renesas
N.º da peça: R5F104LGGFB#30 ✓ AtivoR5F104LGGFB#30 Visão geral
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. Within the embedded-control hierarchy, this part belongs to the Renesas RL78/G14 family of low-power, high-function general-purpose microcontrollers. Its 16-bit RL78 architecture is intended for compact control systems that require deterministic operation, modest processing requirements, and economical integration rather than the application-processing resources of a high-end system-on-chip.
Three principal characteristics define the R5F104LGGFB#30 for initial design planning. Its 32MHz maximum operating frequency supports time-sensitive control tasks, while 128KB of embedded flash provides room for application code and constant data without an external program-memory device. The 64-LQFP package exposes 64 connections in a 10mm x 10mm surface-mount outline, making it practical for multilayer industrial and metering boards with moderate connector requirements.
Renesas identifies this device as suitable for motor-control, industrial, and metering applications. In those systems, the 16-bit RL78/G14 architecture can execute control logic, read sensors, operate user interfaces, and coordinate actuators within a single component. The LQFP package is easier to inspect and visually verify during assembly than very small leadless packages, which can benefit prototype work and moderate-volume manufacturing where solder-joint inspection is important.
Engineering decisions should be based on the manufacturer’s RL78/G14 hardware and software documentation. Designers must confirm the exact peripheral allocation, pin multiplexing, electrical limits, clock configuration, programming procedure, and startup behavior for this ordering code. Renesas also offers a cross-reference service for replacement analysis, but any substitute should be checked for identical pin functions, memory configuration, peripheral compatibility, operating limits, and software-device identifiers rather than package dimensions alone.
This page combines the manufacturer product designation, distributor technical summaries, package information, commercial guidance, and engineering-focused selection considerations. It is intended to help engineers identify the correct device for an existing 64-LQFP design while preserving the original firmware and hardware architecture wherever possible.
Alternativas drop-in para R5F104LGGFB#30 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
R5F104LJAFB#30
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
R5F104LGGFB#30 Classificações máximas e características elétricas
| Product Type | 16-bit microcontroller IC |
| Microcontroller Family | RL78/G14 |
| Architecture | 16-bit RL78 |
| Maximum Operating Frequency | 32MHz |
| Flash Memory | 128KB |
| Flash Organization | 128K x 8 |
| Encapsulamento | 64-LQFP |
| Package Dimensions | 10mm x 10mm |
| Tipo de montagem | Surface mount |
| Temperatura de operação | -40C to +105C |
| Application Category | Low-power, high-function general-purpose MCU |
| Motor-Control Suitability | Yes |
| Industrial Application Suitability | Yes |
| Metering Application Suitability | Yes |
| Status RoHS | Compliant |
| Contagem de pinos | 64 pins |
Guia de Configuração de Pinos do R5F104LGGFB#30 10mm x 10mm
Configuração de pinos para R5F104LGGFB#30 (pacote 10mm x 10mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para R5F104LGGFB#30.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
R5F104LGGFB#30 é adequado para 6 aplicaçãos: Industrial Motor Control, Smart Metering, Industrial Automation Controllers, Power Conversion Control, Building and Environmental Control, Consumer and Utility Equipment.
Industrial Motor Control
The R5F104LGGFB#30 fits compact industrial motor-control systems that need a 16-bit control engine, deterministic peripheral timing, and sufficient embedded program memory. At up to 32MHz, the RL78/G14 core can coordinate sensor acquisition, motor-control state machines, and protective logic while 128KB of flash holds application code and constants. The 64-LQFP package provides 64 accessible package positions and a 10mm x 10mm footprint suitable for multilayer control boards. Engineers should verify the exact timer channels, PWM outputs, capture inputs, analog interfaces, and motor-driver interface against the hardware documentation before selecting it for a new topology.
Recomendado
Smart Metering
The R5F104LGGFB#30 is suitable for metering equipment where a dedicated embedded controller must acquire measurements, maintain operating state, and manage communications within a constrained embedded footprint. Its 128KB flash provides space for measurement routines, calibration data, communication handlers, and configuration parameters, while the 16-bit RL78/G14 core operates at up to 32MHz for responsive foreground and background tasks. The 64-LQFP format is practical for industrial meter boards requiring inspectable leads. Final selection should account for the required metrology peripherals, communication interface, display or data-storage interface, accuracy expectations, and applicable environmental constraints.
Recomendado
Industrial Automation Controllers
R5F104LGGFB#30 can serve as the central controller in a compact industrial automation module that combines digital I/O, communications, monitoring, and local control functions. The 32MHz 16-bit architecture supports responsive event handling, while 128KB of embedded flash removes the need for an external program-memory device in many control designs. Its 64-LQFP, 10mm x 10mm package allows more generous routing access than many fine-pitch alternatives without making the device excessively large. Before schematic capture, engineers should compare every assigned 64-pin position with the manufacturer pin-description table and confirm that the peripheral mix meets the module’s communication and timing requirements.
Recomendado
Power Conversion Control
The R5F104LGGFB#30 is appropriate for supervisory control in power-conversion equipment where an MCU must coordinate sequencing, monitor operating conditions, and manage protection-related logic. Its 32MHz processing capability supports timely control-loop execution, and its 128KB flash can hold complex state machines, fault logs, parameter tables, and communication protocols. The 64-LQFP package provides the pin count needed for multiple digital signals while retaining a conventional leaded form that is visually inspectable. Designers should verify PWM timing, ADC performance, comparator behavior, fault-pin requirements, and operating-temperature limits before using this MCU as the supervisory element in a converter.
Recomendado
Building and Environmental Control
R5F104LGGFB#30 can support embedded environmental and building-control nodes that combine sensors, discrete outputs, local logic, and communication in one controller. The 16-bit RL78/G14 core at up to 32MHz provides enough throughput for multiple control tasks, while 128KB flash accommodates application logic and parameter storage. Its 64-LQFP outline is useful when a board requires a larger number of accessible signal connections or where leaded-package assembly is preferred. Product qualification should confirm the required timer, serial, analog, and I/O resources, along with EMC, environmental, and functional-safety expectations for the installation environment.
Recomendado
Consumer and Utility Equipment
The R5F104LGGFB#30 is suitable for utility-oriented and compact electronic equipment requiring embedded flash, deterministic low-power control, and a conventional surface-mount package. Its 128KB program-memory capacity can hold control firmware, lookup tables, calibration coefficients, and user-interface logic, while the 32MHz core supports responsive operation. The 64-LQFP package is compatible with automated assembly and offers accessible leads for visual inspection. Engineers should establish the required security, communications, brownout, watchdog, update, and functional-safety features in the design, because the ordering code’s role as a general-purpose MCU does not imply that every product-level feature is present automatically.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para R5F104LGGFB#30 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Notas de projeto
Do not treat the 64-LQFP outline as proof of drop-in compatibility. Before replacing R5F104LGGFB#30, compare the complete ordering code, pin-description table, alternate functions, supply pins, ground pins, reset behavior, programming signals, peripheral allocation, and electrical limits. Even an MCU with the same family, package, memory size, and clock rate can require different firmware initialization or peripheral assignments.
Assign all 64 package positions from the manufacturer pin table rather than from an informal board drawing. Check that each power and ground connection satisfies the RL78/G14 hardware guidance, route sensitive clock and analog signals away from switching nodes, and place required decoupling capacitors close to their associated supply pins. Confirm the 10mm x 10mm land pattern, paste geometry, and assembly clearances against the official package drawing.
Use the manufacturer’s specified operating and supply limits when defining the power tree for the R5F104LGGFB#30. Account for the MCU load, external pull components, analog circuitry, and switching losses when sizing regulators. Review clock, debug, communications, and peripheral states during power-budget analysis because an idle current measurement alone does not represent the highest demand in a motor-control or metering design.
Preserve a clean separation between high-current switching paths and the microcontroller’s supply, reset, clock, and sensor inputs. Follow the RL78/G14 hardware documentation for oscillator layout, decoupling, and unused-pin treatment. Use the extended -40C to +105C operating range only when the complete product design, external components, storage conditions, and assembly process are also suitable for that temperature span.
Informações de conformidade
RoHS compliance is stated by the product listing. The other compliance fields are not established by the manufacturer information for this ordering code.