Renesas Electronics

R5F10PGJKNA#U5 - 24MHz 16-Bit MCU with 256KB Flash | Renesas Electronics

N.º da peça: R5F10PGJKNA#U5 ✓ Ativo
48-HVQFN (7 x 7 mm) Package 24 MHz Speed 256 KB Memory
MOQ: 1 |

R5F10PGJKNA#U5 Visão geral

Renesas Electronics R5F10PGJKNA#U5 is a 16-bit RL78/F14 automotive microcontroller with a 24 MHz operating frequency, 256 KB of flash memory, and a 48-pin HVQFN 7 x 7 mm package. It belongs to the RL78 family of low-power microcontrollers and combines general-purpose embedded control with CAN and LIN communication interfaces. The manufacturer identifies the RL78/F14 series as the upper-level RL78 product family, available in configurations from 30 to 100 pins and 48 to 256 KB of flash memory.

An RL78 microcontroller is a compact embedded-processing device designed for low-consumption control applications. The RL78 architecture is part of the broader microcontroller hierarchy, combining a CPU core, flash program memory, data memory, timers, communication peripherals, analog functions, and GPIO in one integrated circuit. These devices are commonly used where deterministic control, low standby power, and integrated automotive communication functions are more important than high-end processor performance.

The R5F10PGJKNA#U5 combines a 16-bit CPU operating at 24 MHz with 256 KB of flash organized as 256K x 8. Its integrated CAN and LIN modules support vehicle networking and other distributed automotive control systems. The family also supports BLDC motor control through timer RD, comparator, and functional-safety features. These characteristics make the device suitable for body-electronics controllers, motor-control systems, gateways, sensor nodes, and CAN-connected industrial equipment.

The 48-HVQFN package provides a compact surface-mount footprint for space-constrained control boards. Because the exposed-pad package concentrates thermal and electrical requirements into a small area, PCB construction must follow the Renesas land-pattern, solder-mask, paste, and reflow guidance. Automotive qualification information must also be confirmed against the exact ordering code and current manufacturer documentation before production release.

Typical implementations include CAN body modules, LIN sub-networks, brushless DC motor controllers, battery and charging subsystems, and compact automotive sensor nodes. In these systems, the MCU can execute application firmware while coordinating communications through its integrated CAN and LIN peripherals, reducing the need for separate interface devices. Its 256 KB flash capacity also provides room for larger control routines, diagnostics, and communication tables.

For a new design, verify the exact pin multiplexing, peripheral availability, clock limits, electrical characteristics, and supported development environment in the manufacturer datasheet. Production firmware should include checks for reset behavior, watchdog operation, communication error handling, and brownout conditions. Board bring-up should begin with a clean power supply, controlled clock startup, and continuity checks around the exposed pad before peripheral testing.

This product page consolidates the confirmed 24 MHz, 16-bit, 256 KB flash, automotive, CAN, LIN, and 48-HVQFN attributes into an application-oriented selection guide. It also distinguishes confirmed device facts from parameters that require formal datasheet review and directs sourcing requests through the XAIPART Request a Quote form.

Alternativas drop-in para R5F10PGJKNA#U5 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

R5F10PGJKNA#U5 Classificações máximas e características elétricas

Product Type 16-bit microcontroller (MCU)
Product Series RL78/F14
CPU Maximum Frequency 24 MHz
CPU Word Length 16 bit
Flash Memory 256 KB
Flash Organization 256K x 8
CAN Interface Built-in CAN module
LIN Interface Built-in LIN module
BLDC Motor Control Supported through timer RD, comparator, and functional-safety features
Encapsulamento 48-HVQFN (7 x 7 mm)
Contagem de pinos 48 pins
Tipo de montagem Surface mount
Automotive Qualification AEC-Q100 automotive device
Low-Consumption Feature RL78/F14 series positioned for low consumption current

Guia de Configuração de Pinos do R5F10PGJKNA#U5 48-hvqfn (7 x 7 mm)

Configuração de pinos para R5F10PGJKNA#U5 (pacote 48-hvqfn (7 x 7 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 48-hvqfn (7 x 7 mm) para R5F10PGJKNA#U5

Nenhum dado detalhado de pinagem disponível para R5F10PGJKNA#U5.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

R5F10PGJKNA#U5 é adequado para 6 aplicaçãos: Automotive CAN Body Controller, LIN Sensor and Sub-Network Node, BLDC Motor Control, Automotive Gateway and Communication Hub, Compact Industrial Control Node, Battery and Charging Controller.

🚗

Automotive CAN Body Controller

The R5F10PGJKNA#U5 fits an automotive body controller because its RL78/F14 architecture combines a 16-bit CPU at 24 MHz with 256 KB of flash and a built-in CAN module. It can execute door, lighting, input, or centralized body-control logic while exchanging diagnostic and status data through the vehicle network. The 256 KB program-memory capacity supports control routines, diagnostic tables, and communication software without requiring a separate memory device. Its 48-HVQFN 7 x 7 mm package also helps preserve board area in compact electronic control units. Use the manufacturer pin table and reference design guidelines for CAN routing, termination, decoupling, exposed-pad assembly, and production test access.

🧩

LIN Sensor and Sub-Network Node

The R5F10PGJKNA#U5 is appropriate for a compact LIN node because the RL78/F14 includes both LIN and CAN modules. A LIN-connected sensor, actuator, or gateway can use one MCU for application logic, diagnostics, and communication while retaining CAN for backbone or gateway communication. The 24 MHz CPU supports responsive peripheral control and protocol handling, and 256 KB flash accommodates calibration and diagnostic routines. Designers should use the Renesas pin and electrical documentation to allocate LIN, wake-up, timer, and communication resources. PCB implementation should separate sensitive LIN routing from switching nodes and provide local supply bypassing near the MCU.

⚡

BLDC Motor Control

The R5F10PGJKNA#U5 supports BLDC motor-control systems through the RL78/F14 family's timer RD, comparator, and functional-safety capabilities. At 24 MHz, the 16-bit core can coordinate commutation, sensor evaluation, fault handling, and supervisory logic for compact motor controllers. The built-in CAN and LIN interfaces can connect the motor controller to broader vehicle or industrial networks, reducing external communications hardware. Application design still requires a suitable three-phase gate driver, MOSFET power stage, current sensing, overcurrent protection, and firmware-safe timing. Validate timing, comparator routing, thermal margins, and exposed-pad heat spreading against the manufacturer documentation.

🌐

Automotive Gateway and Communication Hub

The R5F10PGJKNA#U5 fits a vehicle gateway where both CAN and LIN connectivity are required in a compact controller. Its 16-bit RL78 core and 24 MHz clock can handle protocol conversion, message filtering, diagnostics, and application-level coordination, while 256 KB flash provides sufficient room for firmware and configuration data. Consolidating two network interfaces into one MCU can reduce board area and simplify the design, although total CAN transceiver count remains application-dependent. Keep communication traces controlled, provide isolated or protected interfaces where required by the vehicle network architecture, and follow automotive ESD, EMC, grounding, and reflow requirements during implementation.

🏭

Compact Industrial Control Node

The R5F10PGJKNA#U5 can serve in compact industrial equipment that needs deterministic embedded control, low-consumption behavior, and network connectivity. Its 16-bit CPU at 24 MHz, 256 KB flash, CAN module, and LIN module suit motor controls, condition-monitoring controllers, actuators, and distributed equipment nodes. The 48-HVQFN package supports compact board construction, while the RL78/F14 feature set allows communication and control functions to share one device. For industrial use, evaluate the exact operating-temperature grade, isolation, surge protection, EMC performance, and functional-safety requirements. Use the part as designed only if its automotive-oriented ordering code and qualification records meet the end application's standards.

🔋

Battery and Charging Controller

The R5F10PGJKNA#U5 is suitable for a compact battery-monitoring or charging-control subsystem when the design benefits from low-consumption embedded control and automotive-network integration. The 24 MHz RL78 core can supervise measurements, enforce operating states, manage diagnostics, and communicate status over CAN or LIN. With 256 KB flash, the controller can combine application logic, calibration tables, and fault records in one device. The MCU does not replace power-conversion or battery-measurement circuitry, so designers still need suitable sensing, balancing, protection, and actuator stages. Confirm the ADC, timer, comparator, and communication resources needed by the final design in the manufacturer datasheet before assigning peripheral functions.

Resumo dos produtos recomendados

AT90CAN64-16MUR Microchip Technology Usado em: Automotive CAN Body Controller, Compact Industrial Control Node MSP430F5519IPN Texas Instruments Usado em: LIN Sensor and Sub-Network Node ATMEGA808-AU Microchip Technology Usado em: LIN Sensor and Sub-Network Node TPS5715PHPR Power-management companion for motor-control rails Usado em: BLDC Motor Control DRV8323 BLDC gate-driver companion Usado em: BLDC Motor Control TJA1042T/3 CAN transceiver companion Usado em: Automotive Gateway and Communication Hub SN65HVD230 CAN transceiver alternative for compatible bus designs Usado em: Automotive Gateway and Communication Hub MSP430F423IPMR Texas Instruments Usado em: Compact Industrial Control Node BQ29700DSER Battery-protection companion Usado em: Battery and Charging Controller TPS2553DBVR Current-limit and power-path companion Usado em: Battery and Charging Controller
What is the R5F10PGJKNA#U5?
The R5F10PGJKNA#U5 is a Renesas Electronics 16-bit RL78/F14 microcontroller operating at up to 24 MHz, with 256 KB of flash memory and a 48-pin HVQFN package. According to the Renesas product page, the RL78/F14 family includes built-in CAN and LIN modules and supports BLDC motor-control applications using timer RD, comparator, and functional-safety features.
What are the key specifications of R5F10PGJKNA#U5 that engineers should know?
The key R5F10PGJKNA#U5 specifications are a 16-bit CPU, 24 MHz maximum operating frequency, 256 KB of flash memory organized as 256K x 8, integrated CAN and LIN interfaces, and a 48-HVQFN 7 x 7 mm package. The Renesas product page identifies the part as an automotive AEC-Q100 RL78/F14 device. Review the manufacturer datasheet for RAM, voltage limits, temperature range, peripheral channels, and exact pin assignments.
Where can I download the R5F10PGJKNA#U5 datasheet?
The official R5F10PGJKNA#U5 product and datasheet resources are available from Renesas Electronics at the manufacturer product-page URL listed on this page. The RL78/F14 product page is the correct starting point for the current datasheet, package information, peripheral details, and ordering documentation. Use the exact R5F10PGJKNA#U5 ordering code when selecting electrical and pinout information.
Where can I find the R5F10PGJKNA#U5 pinout?
The R5F10PGJKNA#U5 pinout should be taken from the pin-description table in the Renesas RL78/F14 manufacturer datasheet. The device uses a 48-HVQFN 7 x 7 mm package, so the land pattern, exposed pad, and numbered terminals must be designed from the manufacturer drawing rather than inferred from another 48-pin device. The package diagram on this page identifies the correct 48-pin device family.
Is the R5F10PGJKNA#U5 suitable for automotive applications?
Yes, the R5F10PGJKNA#U5 is identified as an automotive AEC-Q100 RL78/F14 microcontroller. Its integrated CAN and LIN modules suit connected vehicle systems, while the timer RD, comparator, and functional-safety features support BLDC motor-control designs. Confirm the exact temperature grade and qualification scope for the ordering code before starting a production design.
What communication interfaces does the R5F10PGJKNA#U5 include?
The R5F10PGJKNA#U5 includes built-in CAN and LIN modules. CAN supports higher-bandwidth vehicle networking, while LIN is intended for lower-cost, lower-bandwidth vehicle sub-networks and sensor nodes. According to the Renesas product page, both interfaces are characteristic features of the RL78/F14 family. Specific baud rates, filters, and peripheral channel assignments must be confirmed in the datasheet.
Can the R5F10PGJKNA#U5 control a BLDC motor?
Yes, the R5F10PGJKNA#U5 is suitable for BLDC motor-control designs because the RL78/F14 family supports timer RD, comparator, and functional-safety features. These resources can support commutation timing, input comparison, and motor-control functions. The final design still requires appropriate gate drivers, power stages, current sensing, protection, and firmware tailored to the motor and system safety requirements.
What is the difference between R5F10PGJKNA#U5 and other RL78/F14 devices?
The R5F10PGJKNA#U5 is distinguished within the RL78/F14 family by its 48-HVQFN 7 x 7 mm package, 24 MHz 16-bit CPU, 256 KB flash, and automotive ordering code. Other RL78/F14 devices may use different package dimensions, pin counts, memory capacities, or temperature options. Compare the exact pin assignment and peripheral map before treating another family member as a replacement.
When should I choose the R5F10PGJKNA#U5 over another 48-pin automotive MCU?
Choose the R5F10PGJKNA#U5 when the design specifically benefits from the RL78 architecture, low-consumption operation, 256 KB flash, and integrated CAN and LIN interfaces in a 48-HVQFN package. It is a strong fit for compact automotive body, motor, gateway, and sensor-controller designs. Choose another MCU only when its CPU, memory, safety mechanisms, qualification, and exact peripheral mapping better match the application.
What can replace the R5F10PGJKNA#U5?
A true drop-in replacement must use the same 48-HVQFN land pattern and provide pin-to-pin-compatible power, ground, reset, clock, and peripheral assignments. It should also satisfy the application's 24 MHz performance, 256 KB flash, CAN, LIN, memory, timing, safety, and automotive qualification requirements. No directly validated drop-in replacement is listed here, so verify the manufacturer pin table before committing to a substitute.
Is the R5F10PGJKNA#U5 the same as AT90CAN64-16MUR?
No, the R5F10PGJKNA#U5 is not a package-level equivalent of AT90CAN64-16MUR. The R5F10PGJKNA#U5 uses a 48-HVQFN 7 x 7 mm package and belongs to Renesas' RL78/F14 family, while AT90CAN64-16MUR is an AT90CAN64 device listed with a distinct package. Their CAN capabilities do not make their pinouts, memories, CPU architectures, or software environments interchangeable.
Where can I buy the R5F10PGJKNA#U5 online?
Use the Request a Quote form on this page to request the R5F10PGJKNA#U5, current availability, and order details. The form is the appropriate channel for quote-first procurement and can help confirm the exact 48-HVQFN ordering code and delivery requirements. Request the manufacturer datasheet and lot traceability information with the quotation.
What is the price of the R5F10PGJKNA#U5?
The current commercial quotation for the R5F10PGJKNA#U5 is obtained through the Request a Quote form on this page. The quoted amount can depend on order quantity, package, manufacturing schedule, traceability requirements, and delivery destination. Submit the required quantity and target date to receive a current response rather than relying on a potentially stale catalog amount.
What is the lead time for the R5F10PGJKNA#U5?
The current lead time for the R5F10PGJKNA#U5 should be requested through the Request a Quote form on this page. Include your required quantity, target delivery date, approved-part or traceability requirements, and shipment destination. The quote response provides the current manufacturing and supply position for the exact automotive MCU ordering code.
Is the R5F10PGJKNA#U5 in stock?
Current stock for the R5F10PGJKNA#U5 should be confirmed through the Request a Quote form on this page. Because the device is automotive-qualified, supply status can depend on lot availability, quality requirements, and the requested delivery schedule. Submit the exact MPN and quantity so the order can be matched to the appropriate package and qualification status.
How should a PCB for the R5F10PGJKNA#U5 be laid out?
Use the Renesas 48-HVQFN land pattern, exposed-pad connection, solder-mask, paste, and reflow recommendations for the R5F10PGJKNA#U5. Place decoupling capacitors close to the corresponding supply pins, keep sensitive clock and communications routes short, and provide a low-impedance ground plane. Do not infer exposed-pad dimensions from a generic 48-pin footprint because package-specific manufacturing allowances matter.

Dados de referência de engenharia para R5F10PGJKNA#U5 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the R5F10PGJKNA#U5 when a compact automotive controller needs a 16-bit RL78/F14 CPU at 24 MHz, 256 KB flash, and both CAN and LIN in a 48-HVQFN package. It is particularly attractive for body controllers, LIN sensor nodes, CAN gateways, and BLDC motor-control subsystems where low consumption and automotive qualification are priorities. AT90CAN64-16MUR may suit designs already committed to the AT90CAN64 software and CAN-centered architecture, but it is not a direct footprint replacement. MSP430F5519IPN may be preferable for very low-power embedded nodes where the complete CAN/LIN feature combination is unnecessary. ATMEGA808-AU may fit automotive programs with established AVR toolchains. In every comparison, verify pin compatibility, memory, peripheral availability, temperature grade, qualification, and software support rather than relying on broad device-category similarity.

Comparação com alternativas

Parâmetro Este produto
Brand Renesas Electronics
Package 48-HVQFN (7 x 7 mm)
Product Series RL78/F14
CPU Word Length 16 bit
Maximum CPU Frequency 24 MHz
Flash Memory 256 KB (256K x 8)
CAN Interface Built-in CAN module
LIN Interface Built-in LIN module
Automotive Qualification AEC-Q100 automotive device
BLDC Motor Control Supported through timer RD, comparator, and functional-safety features

Principais diferenciais

  • Integration of CAN and LIN in one automotive MCU (vs AT90CAN64-16MUR)
  • Compact 48-pin automotive package (vs MSP430F5519IPN)
  • Dedicated BLDC control support (vs ATMEGA808-AU)

Notas de projeto

Construct the board from the Renesas 48-HVQFN land pattern and exposed-pad drawing for R5F10PGJKNA#U5. Place input and bypass capacitors close to their associated supply pins, use a continuous ground reference where practical, and avoid routing fast communication signals directly beneath the exposed pad. Confirm solder-mask and paste geometry against the current package drawing before releasing production artwork.

Route CAN and LIN interfaces away from switching power stages and high-current motor edges. Keep clock and reset paths short, avoid stubs on communication nets, and provide clean return paths beneath signals. CAN interface layout should follow the transceiver manufacturer's recommendations, including bus routing, protection placement, and grounding appropriate to the vehicle or industrial environment.

The 48-HVQFN exposed pad is the primary path for heat transfer into the PCB. Implement a thermal-via and copper-pour strategy approved for the land pattern, and derive junction temperature from actual operating loss, ambient conditions, board construction, and the manufacturer thermal model. A compact enclosure may reduce heat dissipation even when the package itself is small, so thermal validation belongs in the assembled-unit test plan.

Do not substitute the MCU solely because another device also offers CAN or LIN. Verify every pin, supply voltage, peripheral instance, interrupt vector, clock requirement, and exposed-pad connection in the manufacturer datasheet. Also check development-tool support, programming method, startup behavior, watchdog configuration, and automotive qualification before migrating an existing design.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The R5F10PGJKNA#U5 is identified as an AEC-Q100 automotive MCU. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current manufacturer product documentation.

Buscas relacionadas

R5F10PGJKNA#U5 datasheet R5F10PGJKNA#U5 pinout R5F10PGJKNA#U5 specifications R5F10PGJKNA#U5 48-HVQFN R5F10PGJKNA#U5 equivalent R5F10PGJKNA#U5 replacement R5F10PGJKNA#U5 price R5F10PGJKNA#U5 stock Renesas R5F10PGJKNA#U5 R5F10PGJKNA#U5 automotive MCU R5F10PGJKNA#U5 CAN LIN controller R5F10PGJKNA#U5 BLDC motor control R5F10PGJKNA#U5 vs AT90CAN64-16MUR

Componentes & termos relacionados

Renesas Electronics R5F10PGJKNA#U5 RL78/F14 RL78 16-bit microcontroller embedded processor 24 MHz 256 KB flash memory 256K x 8 CAN module LIN module BLDC motor control timer RD comparator functional safety 48-HVQFN HVQFN package family QFN package family surface-mount package automotive electronics vehicle network AEC-Q100 low-consumption current Renesas cross-reference tool R5F10PGJKNA#U5 pinout
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ