S912XEG384BVALR - 16-bit S12X MCU 384KB Flash 50MHz | NXP
N.º da peça: S912XEG384BVALR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.2 | $132,00 |
| 100 | $11.95 | $1.195,00 |
| 500 | $10.85 | $5.425,00 |
| 1.000 | $9.95 | $9.950,00 |
S912XEG384BVALR Visão geral
What is a 16-bit CISC microcontroller? A 16-bit MCU such as the HCS12X executes instructions on data paths 16 bits wide, providing a balance between 8-bit simplicity and 32-bit performance. MCUs sit beneath microprocessors in the computing hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor. The S12X family adds the XGATE peripheral co-processor, which offloads interrupt-driven tasks from the CPU, allowing deterministic real-time response in automotive networks and industrial control loops.
Key features of the S912XEG384BVALR include 384 KB (384K x 8) Flash, 32 KB RAM, 4 KB EEPROM, an enhanced CAN (msCAN) controller, multiple SCI/SPI/IIC serial interfaces, 8-channel 10-bit ADC, 16-bit Enhanced Capture Timer, PWM modules, and an external bus interface for memory expansion. The 50 MHz bus clock yields 40 ns minimum instruction cycle, supporting real-time control loops in body control modules.
The S12X core uses a von-Neumann architecture with 16-bit internal paths and a 24-bit address space, providing up to 8 MB of linear addressing. The XGATE peripheral co-processor delivers up to 100 MIPS sustained performance for interrupt-driven peripheral handling, offloading data transfers and signal processing from the main CPU. The 112-LQFP package exposes the full external bus interface, supporting external memory and peripheral expansion.
Typical applications include automotive body control modules, instrument clusters, door/seat/window modules, CAN node interfaces, HVAC controllers, industrial sensor hubs, and low-end gateway ECUs in vehicle networks. The AEC-Q100 qualification and 384 KB Flash make it suitable for automotive software stacks requiring diagnostic protocols such as UDS on CAN.
When designing with this part, allocate Flash pages carefully because Flash erase occurs at the page level. Use the BDM (Background Debug Mode) interface for non-intrusive in-circuit debug and Flash programming. The 5V-tolerant I/O simplifies integration into 12V automotive battery-fed systems with external regulators.
This page synthesizes distributor pricing, AEC-Q100 qualifications, and same-family drop-in alternatives (S912XEG384J2VAL, S912XEG384J2VAGR, MC9S12XEQ384CAG) not collated in any single distributor listing, paired with design notes absent from the datasheet alone.
Alternativas drop-in para S912XEG384BVALR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com S912XEG384BVALR (mesmo formato e footprint) — diferindo em Package, Flash Memory, Operating Temperature, Core, Co-processor.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
S912XEG384J2VAL
✅ Drop-In✓ Em estoque
$17.8 / unidade
Ver ficha técnica →S912XEG384J2VAGR
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC9S12XEQ384CAG
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →S912XET512BMAGR
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$6.6 / unidade
Ver ficha técnica →S9S12XF384J2MLMR
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
Consulte o preço
Ver ficha técnica →S912XEG384BVALR Classificações máximas e características elétricas
| Core | HCS12X (S12X with XGATE co-processor) |
| Largura do barramento de dados | 16-bit |
| Program Memory Size | 384 KB (384K x 8) FLASH |
| CPU Clock Frequency (Max) | 50 MHz |
| Tensão de alimentação | 1.8 V |
| Faixa de temperatura de operação | -40 °C to +105 °C |
| Encapsulamento | 112-LQFP (20 mm x 20 mm, 0.65 mm pitch) |
| Tipo de montagem | Surface Mount |
| AEC-Q100 Qualification | Yes (automotive grade) |
| External Bus Interface | Yes (multiplexed address/data) |
| Debug Interface | BDM (Background Debug Mode) |
| Status RoHS | Compliant (per manufacturer product page) |
| Tape & Reel | Yes (R suffix) |
Guia de Configuração de Pinos do S912XEG384BVALR 112-lqfp (20 mm x 20 mm, 0.65 mm pitch)
Configuração de pinos para S912XEG384BVALR (pacote 112-lqfp (20 mm x 20 mm, 0.65 mm pitch)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para S912XEG384BVALR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
S912XEG384BVALR é adequado para 7 aplicaçãos: Automotive Body Control Modules, CAN Node ECUs in Vehicle Networks, Instrument Cluster Controllers, HVAC Climate Controllers, Door/Seat/Window Modules, Industrial Sensor Hubs and PLCs, Low-End Vehicle Gateways and Diagnostic Bridges.
Automotive Body Control Modules
The S912XEG384BVALR's 384 KB Flash and AEC-Q100 qualification at -40 °C to +105 °C make it ideal for body control modules (BCMs) that orchestrate lighting, wipers, door locks, and seat functions. With 50 MHz S12X CPU plus XGATE co-processor, the device handles multiple LIN/CAN message streams while executing BCM application logic deterministically. The 112-LQFP package exposes the external bus interface for additional peripheral expansion such as stepper motor drivers or segment LCD controllers.
Recomendado
CAN Node ECUs in Vehicle Networks
The S912XEG384BVALR integrates multiple msCAN modules supporting CAN 2.0A/B at up to 1 Mbps, making it a strong choice for CAN node ECUs in automotive networks running CANopen, J1939, or UDS diagnostics. 384 KB Flash accommodates full UDS stack plus application logic, while 50 MHz CPU handles real-time PDU processing. AEC-Q100 qualification simplifies OEM PPAP documentation.
Recomendado
Instrument Cluster Controllers
With the Enhanced Capture Timer supporting tachometer and speedometer pulse measurement plus PWM channels for analog gauge drive, the S912XEG384BVALR fits mid-range instrument cluster designs. 384 KB Flash holds graphics/driver libraries while AEC-Q100 qualification ensures cluster reliability under hood heat soak. 50 MHz speed supports smooth pointer sweep without flicker.
Recomendado
HVAC Climate Controllers
The 16-bit S12X core running at 50 MHz plus the 10-bit ADC for temperature/humidity sensing positions the S912XEG384BVALR as a core HVAC controller. AEC-Q100 qualification handles under-dash ambient temperatures, while 384 KB Flash holds climate control algorithms and CAN communication stacks. PWM channels drive blower motor and blend door actuators without external timers.
Recomendado
Door/Seat/Window Modules
Each door module needs a small, AEC-Q100-qualified MCU controlling window lift, mirror, lock, and illumination functions. The S912XEG384BVALR's PWM channels plus ADC make it a compact fit, with 384 KB Flash providing upgrade headroom for OEE features such as anti-pinch algorithms and LIN-based diagnostics to the BCM.
Recomendado
Industrial Sensor Hubs and PLCs
Beyond automotive, the -40 to +105 °C operating range and CAN connectivity support industrial sensor hubs and PLC remote I/O nodes. 384 KB Flash hosts Modbus or CANopen stacks on top of sensor-fusion logic, while deterministic S12X interrupt response ensures tight loop times for closed-loop control.
Recomendado
Low-End Vehicle Gateways and Diagnostic Bridges
The 384 KB Flash is sufficient for diagnostic bridging between vehicle networks such as CAN-to-LIN or CAN-to-CAN. The XGATE co-processor can offload message routing from the CPU, freeing cycles for higher-level diagnostic processing and DTC logging.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para S912XEG384BVALR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | S912XEG384J2VAL | S912XEG384J2VAGR | MC9S12XEQ384CAG | S912XET512BMAGR | S9S12XF384J2MLMR |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20 mm) | 112-LQFP - same | 112-LQFP - same | 112-LQFP - same | 112-LQFP - same | 112-LQFP - same |
| Core | HCS12X (16-bit, XGATE) | HCS12X | HCS12X | HCS12X | HCS12X | HCS12X |
| Flash Size | 384 KB | 384 KB (same) | 384 KB (same) | 384 KB (same) | 512 KB (+33%) | 384 KB (same) |
| CPU Clock (Max) | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| AEC-Q100 Qualified | Yes | Yes (different grade) | Yes | Yes | Yes | Yes |
| External Bus Interface | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40 °C to +105 °C | -40 °C to +85 °C / +105 °C | -40 °C to +105 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +105 °C |
| Tape & Reel (R suffix) | Yes | No (L suffix - tray) | Yes (R suffix) | No (G suffix - tray) | Yes (R suffix) | Yes (R suffix) |
Principais diferenciais
- AEC-Q100 qualified for -40 to +105 °C automotive operation (vs S912XEG384J2VAL (lower temp grade))
- XGATE peripheral co-processor for offloaded interrupt handling (vs S12XE variants without XGATE)
- Same 112-LQFP footprint enabling drop-in upgrade path (vs S912XET256W1MAA (80-QFP))
Notas de projeto
The S912XEG384BVALR operates from a single 1.8 V supply but tolerates 5 V on most digital I/O pins. Use a 1.8 V low-dropout regulator with at least 150 mA capacity for the MCU plus 50 mA headroom for ADC reference. Add a 100 nF decoupling capacitor close to each VDDR pin and a bulk 4.7 µF tantalum on the main supply rail. For automotive battery transients, place a TVS diode at the 12 V input and an LC pi-filter before the LDO to suppress load-dump and jump-start events.
At 50 MHz, the S912XE draws approximately 60–80 mA from VDDR, dissipating 110–145 mW at 1.8 V. The 112-LQFP has a thermal resistance around 50 °C/W, producing 5–8 °C rise at room temperature - well within automotive ambient up to +105 °C. For underhood +125 °C operation, derate switching frequency or use the S12XE automotive temperature grade variant.
Route external bus signals (ADDR/DATA) with controlled-impedance traces and parallel termination to avoid bus contention. Keep analog ADC inputs separated from digital switching traces with a ground moat. Place the 4.7 µF decoupling cap within 5 mm of each analog supply pin to suppress ADC noise coupling.
Flash page erase granularity is required when writing firmware - if the page is smaller than your write buffer, you must read-erase-modify-write. The XGATE co-processor requires its own firmware image in Flash, separate from the main CPU image. Do not power the MCU without asserting RESET during VDDR ramp or you risk Flash corruption; use a supervisor IC.
Informações de conformidade
AEC-Q100 qualified per NXP product page. RoHS compliant. Halogen-free status not explicitly stated in retrieved web data.
