S9S08DV128F2CLFR - 8-Bit 40MHz 128KB MCU | NXP
N.º da peça: S9S08DV128F2CLFR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.279 | $6,28 |
| 10 | $6.279 | $62,79 |
| 100 | $6.279 | $627,90 |
| 500 | $6.279 | $3.139,50 |
| 1.000 | $6.279 | $6.279,00 |
S9S08DV128F2CLFR Visão geral
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals into one embedded-control component. The S08 family belongs to the broader 8-bit MCU hierarchy and is commonly used when deterministic control, modest processing demand, and a compact embedded platform are more important than high-end computation. The S9S08DV128F2CLFR is therefore suited to motor, body, sensor, and industrial-control subsystems.
The verified product information identifies an S08 core, 8-bit architecture, 128 KB Flash organized as 128K x 8, and a maximum frequency of 40 MHz. Its automotive qualification is useful for applications requiring a documented automotive-grade temperature range, while the 48-LQFP package provides a leaded surface-mount form factor for PCB assembly. The R suffix and package suffix identify ordering and package-related ordering details; exact suffix interpretation should be confirmed against the NXP ordering information.
Typical implementation roles include automotive body-control modules, actuator controllers, sensor-hub controllers, and small motor-control platforms. The 40 MHz clock provides processing headroom for interrupt-driven control, while 128 KB Flash provides room for application firmware, configuration tables, and diagnostic routines. Exact RAM size, peripheral configuration, electrical limits, pin names, and package dimensions beyond the verified package size are not supplied in the retrieved data.
PCB design should preserve the LQFP land pattern, route power and ground carefully, and validate signal integrity for any externally connected interface. Because the verified excerpts do not provide a complete manufacturer pinout, a complete pin map should be downloaded from the official NXP datasheet before layout or firmware bring-up. Automotive production designs should additionally follow the manufacturer’s qualification, traceability, and validation requirements.
This page combines the verified distributor specifications, package identity, sourcing links, and application guidance for S9S08DV128F2CLFR. It emphasizes the information needed for initial component selection while clearly separating confirmed facts from parameters that still require datasheet confirmation.
Alternativas drop-in para S9S08DV128F2CLFR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com S9S08DV128F2CLFR (mesmo formato e footprint) — diferindo em Package, Flash Memory, ADC, Connectivity, Program Memory Size.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
S9S08DN32F2CLF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
S9S08AW16AE0CLC
✅ Drop-In✓ Em estoque
$1.9 / unidade
Ver ficha técnica →S9S08AW60E5MFGE
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$6.05 / unidade
Ver ficha técnica →S9S08AW32E5MPUE
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.95 / unidade
Ver ficha técnica →S9S08AW32VFGE
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC9S08QE8CTG
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$6.3214 / unidade
Ver ficha técnica →S9S08DV128F2CLFR Classificações máximas e características elétricas
| Architecture | 8-bit |
| Processor Core | S08 |
| Frequência máxima de clock | 40 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 |
| Encapsulamento | 48-LQFP (7x7) |
| Package Code | LFQFP |
| Terminal Count | 48 |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Faixa de temperatura de operação | -40 °C to +85 °C |
| Automotive Qualification | Automotive Qualified |
| Tipo de montagem | Surface Mount |
| Peak Reflow Temperature | 260 °C |
| Core | S08 |
| Tipo de memória | Embedded Flash |
Guia de Configuração de Pinos do S9S08DV128F2CLFR square
Configuração de pinos para S9S08DV128F2CLFR (pacote square). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para S9S08DV128F2CLFR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
S9S08DV128F2CLFR é adequado para 6 aplicaçãos: Automotive Body Control, Sensor Hub Controller, Small Motor Control, Industrial Control Module, Automotive Lighting Controller, Instrument Panel Peripheral.
Automotive Body Control
The S9S08DV128F2CLFR fits an automotive body-control module that coordinates door, lighting, locking, or climate-related functions. Its verified 40 MHz maximum clock and 128 KB Flash provide room for event handling, diagnostic routines, and peripheral coordination, while the -40 °C to +85 °C range supports automotive environmental conditions. In a body ECU, the MCU would read switch and sensor inputs, drive outputs through suitable interface circuits, and manage debouncing, fault flags, and timing. The 48-LQFP footprint offers many external connections compared with a small leadless package, but the exact GPIO and peripheral mapping must be confirmed from the official NXP pinout before layout.
Recomendado
Sensor Hub Controller
Use the S9S08DV128F2CLFR as a local controller for a small automotive or industrial sensor hub. Its 128 KB Flash can hold device drivers, calibration tables, filtering logic, and diagnostic code, while the 40 MHz maximum clock supports time-based acquisition and communication servicing. The controller can aggregate inputs from temperature, pressure, position, or switch sensors and forward processed data to another system. Exact ADC, timer, and serial-interface parameters are not present in the verified excerpts, so the design should select pins only after checking the NXP datasheet. The 48-LQFP package also leaves more routing flexibility than a compact low-pin-count MCU.
Recomendado
Small Motor Control
The S9S08DV128F2CLFR is suitable for compact actuator and motor-control subsystems where firmware and control-loop headroom matter. The 40 MHz maximum clock can support interrupt-driven state machines, timing tasks, and protection logic, while the 128 KB Flash leaves space for startup, calibration, and fault-recovery routines. External MOSFETs, gate drivers, current sensing, and protection components would normally handle power conversion and motor current; those functions are not specified in the verified data and must be designed separately. Validate pin muxing, timer availability, electrical limits, and thermal requirements against the manufacturer documentation before using this MCU directly in a motor-drive stage.
Recomendado
Industrial Control Module
For an industrial controller, the S9S08DV128F2CLFR provides a compact 8-bit control platform with 128 KB Flash and a 40 MHz maximum clock. It can implement a state machine, monitor discrete inputs, sequence outputs, and retain diagnostic information without a separate external program-memory device. The LQFP package provides a practical leaded surface-mount assembly format and a larger pin count for external interfaces. Because the verified data does not specify supply voltage, RAM, GPIO count, ADC performance, or communication peripherals, engineers should not assume a specific industrial interface is present. Those features must be confirmed from the current NXP datasheet and errata.
Recomendado
Automotive Lighting Controller
The S9S08DV128F2CLFR can serve as the logic controller for an automotive lighting module, provided the required communication, timing, and output interfaces are confirmed in the datasheet. The 128 KB Flash supports lighting sequences, debounce logic, diagnostic tables, and configuration constants, while the 40 MHz maximum clock provides control-processing margin. External driver transistors or LED drivers should handle the actual load because the MCU is not verified here as a power driver. The -40 °C to +85 °C operating range is relevant to automotive environments, but production qualification also requires the manufacturer’s reliability and compliance documentation.
Recomendado
Instrument Panel Peripheral
The S9S08DV128F2CLFR is suitable for a peripheral controller adjacent to a display, keypad, or status-indicator assembly. Its 128 KB Flash can hold UI mapping, button logic, indicator sequencing, and diagnostic data, while the 40 MHz maximum clock helps service multiple interrupt-driven tasks. The controller would communicate with the display or vehicle network through peripherals that are not fully specified in the verified excerpts; therefore, interface selection must wait until the NXP datasheet is checked. The 48-LQFP package offers more external signal options than a minimal package, but routing and grounding should be planned around the actual power and signal-pin assignment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para S9S08DV128F2CLFR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | S9S08DN32F2CLF | S9S08AW16AE0CLC | S9S08AW60E5MFGE | S9S08AW32E5MPUE | S9S08AW32VFGE |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7), candidate | 48-LQFP (7x7), candidate | 48-LQFP (7x7), candidate | 48-LQFP (7x7), candidate | 48-LQFP (7x7), candidate |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
Principais diferenciais
- Larger verified Flash capacity (vs S9S08DN32F2CLF)
- Higher verified Flash capacity than smaller S08 candidates (vs S9S08AW16AE0CLC)
- Automotive-oriented operating specification (vs MC9S08QE8CTG)
Notas de projeto
Start the layout from the official NXP 48-LQFP land pattern rather than inferring dimensions from the distributor description. Confirm pin 1 orientation, pad numbering, thermal-via requirements, and solder-mask clearance against the current package drawing. Keep the MCU footprint compatible with the intended assembly process and provide adequate clearance to adjacent tall or heat-sensitive components.
The retrieved data confirms a -40 °C to +85 °C temperature range but does not provide the supply-voltage limits or absolute maximum ratings. Before routing power, verify VDD, VSS, I/O limits, internal regulator details, and decoupling requirements in the NXP datasheet. Place bulk and local bypass capacitors according to the manufacturer’s recommended circuit, keeping the return path short and quiet.
Treat every externally connected pin as an unknown function until the official pinout is checked. Route high-speed or externally exposed signals away from switching nodes and noisy power-regulator areas, and provide a defined return path for each interface. The 40 MHz maximum clock does not by itself specify peripheral performance, so timing constraints must be taken from the relevant datasheet section and application circuit.
Do not treat a same-package candidate as a drop-in replacement without checking pin names, alternate-function mappings, reset behavior, memory size, peripheral availability, and qualification grade. The 128 KB Flash in the target is materially different from the DN32, AW16, AW32, and AW60 candidates identified in comparison searches. Use the NXP cross-reference tool and manufacturer documentation before changing a released BOM.
Informações de conformidade
The verified listings identify automotive qualification and the operating temperature range, but the supplied data does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these claims using the current NXP product documentation and applicable supplier certificates.