Skyworks Solutions

SI2404-C-FTR 2.4 kbps ISOModem | Skyworks | 24-TSSOP (Tape & Reel)

N.º da peça: SI2404-C-FTR ✗ Fim de vida
3 V to 3.6 V Vdss 24-pin TSSOP Package
MOQ: 1 |

SI2404-C-FTR Visão geral

Skyworks Solutions, Inc. SI2404-C-FTR is a system-side ISOmodem codec integrated circuit for legacy telephone-line data communication, with support for 2.4 kbps operation and Bell 103, Bell 212A, V.21, V.22, V.23, and V.29 signaling in a 24-pin TSSOP package. The device operates from a 3 V to 3.6 V supply and is presented commercially as part of a 56 kbps modem chipset.

An ISOmodem is a modem codec that combines line-interface signal processing with digital data functions while separating the system-side digital interface from the analog telephone-network side. In the broader semiconductor hierarchy, SI2404-C-FTR belongs to the modem IC, interface IC, data-communication IC, and signal-processing semiconductor categories. It is intended for embedded equipment that requires reliable modem connectivity over a two-wire telephone pair rather than a modern packet-based network.

The principal functional characteristics include a maximum listed data rate of 2.4 kbps, support for five named modulation or signaling protocols, a single 3 V to 3.6 V supply range, and a 24-TSSOP surface-mount package. Its gull-wing lead geometry and rectangular body support conventional PCB assembly. These characteristics make the part suitable for legacy access equipment, embedded data terminals, industrial communication controllers, and retrofitted telecommunications systems.

The SI2404-C-FTR is identified as an ISOModem system-side DAA rather than a complete voice-grade modem. This distinction matters because the companion line-side interface, isolation requirements, transformers, connectors, and external interface circuitry remain part of the complete telephone-line design. The chip concentrates modulation, demodulation, and data-conversion functions into one mixed-signal IC while leaving board-level network coupling and protection to the designer.

Typical deployments include data-only terminal equipment, remote monitoring systems, access concentrators, and legacy industrial controllers that communicate over switched or dedicated telephone lines. Designers should treat the 2.4 kbps operating rate as the principal bandwidth constraint: it favors reliable low-volume character or control traffic rather than bulk file transfer, audio streaming, or high-speed internet access. Bell protocol compatibility also affects interoperability with the intended remote modem and central-office equipment.

Layout is critical because the modem codec bridges digital logic and analog telephone-line signaling. Place decoupling and analog interface components according to the manufacturer's reference layout, keep sensitive analog traces away from fast digital return currents, and use controlled ground connections to minimize conversion noise. Because lifecycle information and a complete pin description are not stated on the product listings, verify availability, pin functions, and electrical limits with the manufacturer before beginning a new production design.

This page consolidates the known device identity, package information, protocol support, sourcing links, replacement candidates, comparison parameters, and practical design guidance into one engineering-focused reference. It is intended to support initial component selection while keeping unresolved electrical, lifecycle, and pin-level details visible for manufacturer confirmation.

Alternativas drop-in para SI2404-C-FTR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com SI2404-C-FTR (mesmo formato e footprint) — diferindo em Product Type, Package, RoHS Status, Device Type, Package Type.

Skyworks Solutions
Product Type: ISOmodem system-side modem IC
RoHS Status: RoHS compliant
Package Type: 16-pin SOIC
Comparar com SI2404-C-FTR →
Skyworks Solutions
Product Type: System-side ISOmodem data communications IC
Package: 16-pin SOIC
Comparar com SI2404-C-FTR →
Skyworks Solutions
Product Type: Integrated modem and global DAA IC
RoHS Status: Compliant
Package Type: 24-pin TSSOP
Comparar com SI2404-C-FTR →
Skyworks Solutions
RoHS Status: Compliant
Device Type: Modem IC
Comparar com SI2404-C-FTR →

SI2404-D-GT

✅ Drop-In
Skyworks Solutions
📦 24-TSSOP
Integrated modem and global DAA IC · 2.4 kbit/s · Supported · Supported · Supported · Supported · Supported · Supported

Consulte o preço

SI2404-D-FS

✅ Drop-In
Skyworks Solutions
📦 24-TSSOP
System-side ISOmodem data communications IC · Skyworks Solutions · 2,400 bps · 56,000 bps with the appropriate line-side companion device · V.21, V.22, V.23, V.29, Bell 103, Bell 212A · ITU-T and Bell formats, V.44, V.42, V.42bis, MNP2-5 · Automatic rate negotiation · Supported by the SI2404/34/15/04 family documentation

Consulte o preço

Ver ficha técnica →

SI2404-C-FSR

✅ Drop-In
Skyworks Solutions
📦 24-TSSOP
ISOmodem system-side modem IC · 2.4 kbps · 4.92 MHz · V.21, V.22, V.23, V.29, Bell 103, Bell 212A · SPI and UART · 3.3 V · 16-pin SOIC · 3.90 mm

Consulte o preço

Ver ficha técnica →

SI2457-C-FT

✅ Drop-In
Skyworks Solutions
📦 24-TSSOP
Modem IC · 56 kbps · 3 V to 3.6 V · 3.3 V · 26 mA · 0 °C to 70 °C · 24-pin TSSOP · 24

Consulte o preço

Ver ficha técnica →

SI2457-C-FTR

✅ Drop-In
📦 24-TSSOP
Retains the 24-pin TSSOP system-side ISOmodem format and 56 kbps chipset description; ordering code differs by 0 pins, with assessed 80% parameter proximity.

📋 Alternativa de referência (fora do catálogo)

SI2404-C-FTR Especificações

Device Type ISOmodem codec IC
Modem Role System-side DAA
Maximum Listed Data Rate 2.4 kbps
Chipset Data Rate 56 kbps
Supported Protocols Bell 103, Bell 212A, V.21, V.22, V.23, V.29
Supply Voltage Range 3 V to 3.6 V
Encapsulamento 24-pin TSSOP
Package Code TSSOP
Package Width 4.40 mm (0.173 in)
Package Shape Rectangular
Terminal Form Gull wing
Number of Terminals 24
Tipo de montagem Surface mount
Temperature Grade Commercial

Guia de Configuração de Pinos do SI2404-C-FTR rectangular

Configuração de pinos para SI2404-C-FTR (pacote rectangular). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote rectangular para SI2404-C-FTR

Nenhum dado detalhado de pinagem disponível para SI2404-C-FTR.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SI2404-C-FTR é adequado para 6 aplicaçãos: Legacy Telephone-Line Data Terminal, Industrial Remote Monitoring, Access Concentrator, Embedded Telemetry Controller, Legacy Communication Equipment Maintenance, Point-of-Sale and Authentication Terminal.

🌐

Legacy Telephone-Line Data Terminal

SI2404-C-FTR fits a data-only terminal that must communicate through a two-wire telephone line using Bell or V-series modem signaling. Its listed 2.4 kbps rate is sufficient for command messages, short telemetry blocks, and remote-control traffic, while support for Bell 103, Bell 212A, V.21, V.22, V.23, and V.29 provides interoperability with established modem equipment. The 3 V to 3.6 V supply suits compact embedded systems, and the 24-pin TSSOP package permits conventional surface-mount assembly. Designers must still add the required line coupling, isolation, protection, and interface circuitry.

🏭

Industrial Remote Monitoring

SI2404-C-FTR can support a remote industrial monitor that transfers periodic readings over a dedicated telephone circuit. The 2.4 kbps line rate favors compact status, alarm, and configuration packets rather than continuous high-volume telemetry. Its commercial-grade 24-pin TSSOP package is practical for embedded control boards, while the listed Bell and V-series protocols allow the equipment to connect with widely deployed remote modem infrastructure. Practical deployment requires line conditioning, surge protection, call-control logic, and an architecture that tolerates variable telephone-network latency and disconnections.

🖥️

Access Concentrator

A legacy access concentrator can use the SI2404-C-FTR when each channel requires interoperable low-speed modem signaling over copper pairs. The device's system-side DAA role and listed 2.4 kbps operation help partition modem functions between the digital controller and the analog network interface. The 24-TSSOP package supports compact multi-channel equipment, but each line still needs its own compliant network-coupling and protection path. Confirm channel timing, multiplexing requirements, and thermal conditions in the manufacturer documentation before scaling the design across several subscriber ports.

🔧

Embedded Telemetry Controller

SI2404-C-FTR is appropriate for an embedded controller that periodically exchanges data with a central host over a telephone line. Its 2.4 kbps operation is adequate for telemetry frames, diagnostic logs, configuration commands, and acknowledgment traffic, while the selection of established Bell and V-series modes improves compatibility with existing host equipment. The 3 V to 3.6 V operating range integrates cleanly into embedded systems, and the TSSOP package avoids through-hole assembly. Firmware should include timeout, retry, line-quality, and call-establishment logic because modem links can experience variable delay and impairment.

⚡

Legacy Communication Equipment Maintenance

SI2404-C-FTR is useful when repairing or extending installed communication equipment that uses the listed Bell and V-series modem modes. Preserving the 24-pin TSSOP architecture can reduce the scope of a board redesign, provided the exact pinout, clocking, protocol configuration, and analog interface match the original equipment. The commercial temperature grade is suitable for controlled indoor or industrial enclosures, but field conditions must be reviewed against the complete electrical ratings. During maintenance, verify component traceability and compare each external network component before substituting a newer ISOmodem family.

📱

Point-of-Sale and Authentication Terminal

SI2404-C-FTR can serve as the communications element of a point-of-sale terminal or authentication device that depends on a legacy modem connection. Transaction authorization and short coded messages fit within the listed 2.4 kbps modem mode, while supported Bell and V-series protocols offer deployment options across established telephone infrastructure. The surface-mount 24-TSSOP package supports compact board construction, and the 3 V to 3.6 V supply fits many embedded controllers. Security, session timeout, and channel-selection functions remain firmware responsibilities, and the analog telephone interface still requires compliant protection and isolation.

What is the SI2404-C-FTR used for?
The SI2404-C-FTR is a system-side ISOmodem codec IC for telephone-line data communication. According to the DigiKey product listing, it supports 2.4 kbps operation with Bell 103, Bell 212A, V.21, V.22, V.23, and V.29 signaling. It is a 24-pin TSSOP device intended for legacy two-wire telephone-line interfaces rather than modern Ethernet, broadband, or packet-based data links.
What are the key specifications of SI2404-C-FTR that engineers should know?
The SI2404-C-FTR combines a 2.4 kbps modem function, 56 kbps chipset capability, a 3 V to 3.6 V supply, and a 24-pin TSSOP package. According to DigiKey and Ansinor product records, it is a system-side DAA supporting Bell 103, Bell 212A, V.21, V.22, V.23, and V.29. Its commercial temperature grade and surface-mount construction fit compact embedded communications equipment.
Where can I download the SI2404-C-FTR datasheet PDF?
A datasheet record for SI2404-C-FTR is listed by FindIC, while the Octopart result provides the central technical record for the exact part. Open the SI2404-C-FTR product links on this page and select the manufacturer-document reference to locate the PDF. Before layout or schematic approval, obtain the document revision containing the complete pinout, timing limits, analog characteristics, and recommended external network components.
Where can I find the SI2404-C-FTR pinout?
The exact 24-pin TSSOP pinout is not stated in the available product listings, so the pinout cannot be reproduced safely on this page. Use the pin-description table in the manufacturer datasheet and cross-check it against the 24-pin TSSOP footprint before assigning PCB tracks. Do not infer analog, clock, supply, or data pins from the SI2457 family because similar package dimensions do not guarantee identical signal functions.
Where can I buy SI2404-C-FTR online?
Use the Request a Quote form on this page to request SI2404-C-FTR sourcing, current availability, minimum order quantity, and production lead time. The exact part is also indexed by Octopart, DigiKey, Mouser, and several component aggregators. Because this legacy modem codec may have constrained channel availability, provide the required quantity, target date, and approved manufacturer condition when submitting the request.
What is the price of SI2404-C-FTR?
The current price is obtained through the Request a Quote form on this page. No qualifying quantity-break price table for the exact SI2404-C-FTR suffix was available, so no static price is stated. For an auditable quotation, include the required order quantity, shipment destination, date code requirements, and whether the design needs full traceable original components rather than recovered or remarked units.
What is the lead time for SI2404-C-FTR?
Request the current lead time through the Request a Quote form on this page and state the required quantity and production schedule. The verified product pages identify the exact 24-TSSOP part and its historical commercial classification, but they do not state a manufacturer lead-time commitment. Treat any available channel inventory as short-term supply rather than a guarantee for a multiyear production program.
Is SI2404-C-FTR in stock?
Stock status should be confirmed through the Request a Quote form on this page for the exact SI2404-C-FTR suffix. The verified listings identify the part but do not provide a dependable, timestamped stock quantity for it. Because SI2404-C-FTR is a mature legacy interface device, engineers should validate supply continuity, traceability, and alternative-source qualification before approving a new production release.
What is the best drop-in replacement for SI2404-C-FTR?
SI2404-D-GT is the closest listed same-manufacturer replacement candidate because it uses the same 24-pin TSSOP format and belongs to the SI2404 ISOmodem family. SI2404-D-FS, SI2457-C-FT, and SI2457-C-FTR are additional 24-TSSOP candidates listed in comparison results. Confirm pin-by-pin compatibility, protocol support, clock requirements, and supply sequencing with the manufacturer before treating any candidate as a production drop-in replacement.
Can SI2404-D-GT replace SI2404-C-FTR?
SI2404-D-GT is a same-family, 24-pin TSSOP replacement candidate for SI2404-C-FTR and is the strongest direct match in the available comparison data. The SI2404-D-GT comparison identifies the same TSSOP-24 package and RoHS-oriented description. Before substitution, verify that the required Bell and V-series protocol set, data rate, clock configuration, and mixed-signal external-network interface match the original design.
SI2404-C-FTR vs SI2457-C-FT - which is better for a telephone-line modem?
SI2457-C-FT is preferable when a newer 56 kbps system-side ISOmodem architecture satisfies the required protocols and interface timing. SI2404-C-FTR is preferable when an existing design specifically requires its 2.4 kbps mode, Bell 103, Bell 212A, V.21, V.22, V.23, or V.29 behavior. Both are listed as 24-pin TSSOP modem ICs, but package equality alone does not prove that the pins, firmware, or external network interface are interchangeable.
When should I choose SI2404-C-FTR over a newer ISOmodem?
Choose SI2404-C-FTR when maintaining a proven legacy telephone-line design whose interface, protocol behavior, clocking, and component selections are already validated. It is particularly relevant when the installed remote equipment uses 2.4 kbps operation or one of the listed Bell and V-series modes. For new designs, compare newer same-package candidates for broader protocol support, supply continuity, and reduced redesign risk.
Is SI2404-C-FTR suitable for industrial data acquisition?
SI2404-C-FTR can be suitable for an industrial system that communicates over a dedicated or switched telephone line and can tolerate 2.4 kbps throughput. Its 3 V to 3.6 V supply and 24-pin TSSOP package simplify embedded implementation, while the listed Bell and V-series modes provide legacy modem interoperability. Remote monitoring must be designed around latency, line impairment, isolation, surge exposure, and reconnection behavior.
What is the best Skyworks equivalent for SI2404-C-FTR?
SI2404-D-GT is the leading same-manufacturer equivalent candidate because it remains in the SI2404 family and uses a 24-pin TSSOP package. SI2457-C-FT is another 24-pin system-side ISOmodem candidate with a 56 kbps chipset description. Selection should follow a complete review of pin assignment, signaling protocols, data rate, clocking, power supply, external DAA components, and lifecycle rather than package matching alone.
How should I design the SI2404-C-FTR power and layout?
Use a stable 3 V to 3.6 V supply and place the required bypass capacitors close to the device's supply and ground pins. Separate sensitive analog return paths from switching and digital return currents, follow the manufacturer's reference layout, and reserve controlled copper for the analog interface. Because the complete electrical and pin tables are not reproduced in the product listings, obtain the manufacturer datasheet before fixing impedance, grounding, or decoupling values.

Dados de referência de engenharia para SI2404-C-FTR — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose SI2404-C-FTR when maintaining a legacy telephone-line modem whose interface is explicitly designed around 2.4 kbps operation and the listed Bell 103, Bell 212A, V.21, V.22, V.23, or V.29 modes. Its 24-pin TSSOP format and system-side DAA role make it relevant for preserving established PCB and firmware architectures. Consider SI2404-D-GT first when seeking a same-family 24-TSSOP replacement, but verify every electrical and protocol requirement. Use SI2457-C-FT or SI2457-C-FTR when their 56 kbps system-side modem architecture meets the design and can be qualified without retaining the original pinout. No cross-brand drop-in equivalent was established from the available data. For any candidate, compare pin assignments, protocol support, clocking, supply levels, external DAA components, and lifecycle availability before approving a drop-in claim.

Comparação com alternativas

Parâmetro Este produto SI2404-D-GT SI2404-D-FS SI2404-C-FSR SI2457-C-FT SI2457-C-FTR
Package 24-TSSOP 24-TSSOP 24-TSSOP 24-TSSOP 24-TSSOP 24-TSSOP
Brand Skyworks Solutions, Inc. Skyworks Solutions, Inc. Skyworks Solutions, Inc. Skyworks Solutions, Inc. Skyworks Solutions, Inc. Skyworks Solutions, Inc.

Principais diferenciais

  • Directly identified legacy protocol support (vs SI2404-D-GT)
  • Lower-rate operation aligned with control traffic (vs SI2457-C-FT)
  • Complete listing of system-side protocol names (vs SI2404-C-FSR)

Notas de projeto

Treat the SI2404-C-FTR as a mixed-signal device and follow the manufacturer's reference layout exactly. Place input and output bypass capacitors at the associated pins rather than at convenient board locations, provide a continuous ground reference beneath the device, and isolate sensitive analog traces from digital clocks and switching return currents. Keep telephone-network coupling components away from digital signal paths to reduce differential noise and false-start sensitivity.

Design the 3 V to 3.6 V supply rail with low noise and adequate transient margin. Check the complete manufacturer electrical table before fixing capacitor values, clock levels, or digital input thresholds. Use the same general sequence shown in the recommended application circuit: establish the supply before enabling modem signaling, and avoid allowing ringing or line-interface transients to propagate onto the low-voltage codec supply.

Do not assume that two 24-pin TSSOP modem ICs are interchangeable solely because their packages match. Before replacing SI2404-C-FTR with SI2404-D-GT, SI2404-D-FS, or an SI2457 device, compare every pin name, supply threshold, protocol mode, clock connection, timing requirement, and external DAA component. A new PCB should also include a documented fallback for legacy telephone-line systems where supply continuity and long-term product maintenance are important.

Use a controlled analog and digital ground strategy that follows the manufacturer's guidance. The system-side modem codec interfaces with a sensitive telephone-network front end, so indiscriminate splitting of the ground plane can create return-current discontinuities and increase noise. Confirm the exposed requirements, test points, and analog isolation structure in the manufacturer reference design before freezing the PCB stack-up and component placement.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The exact SI2404-C-FTR product listings do not explicitly state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. RoHS wording appearing in comparison records for other variants was not transferred to this exact MPN.

Buscas relacionadas

SI2404-C-FTR datasheet SI2404-C-FTR datasheet pdf SI2404-C-FTR pinout SI2404-C-FTR specifications Skyworks SI2404-C-FTR SI2404-C-FTR 24-TSSOP SI2404-C-FTR equivalent SI2404-C-FTR replacement SI2404-C-FTR vs SI2457-C-FT SI2404-C-FTR price SI2404-C-FTR stock SI2404-C-FTR 2.4 kbps modem SI2404-C-FTR telephone line interface SI2404-C-FTR schematic

Componentes & termos relacionados

Skyworks Solutions, Inc. Silicon Labs SI2404-C-FTR SI2404-D-GT SI2404-D-FS SI2404-C-FSR SI2457-C-FT SI2457-C-FTR ISOmodem modem codec IC system-side DAA interface IC mixed-signal semiconductor Bell 103 Bell 212A V.21 V.22 V.23 V.29 2.4 kbps 56 kbps 24-TSSOP TSSOP package family surface mount RoHS telephone-line data communication industrial telemetry remote monitoring power supply rejection ratio
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ