SI2404-C-FTR 2.4 kbps ISOModem | Skyworks | 24-TSSOP (Tape & Reel)
MPN: SI2404-C-FTR ✗ پایان تولیدSI2404-C-FTR نمای کلی
An ISOmodem is a modem codec that combines line-interface signal processing with digital data functions while separating the system-side digital interface from the analog telephone-network side. In the broader semiconductor hierarchy, SI2404-C-FTR belongs to the modem IC, interface IC, data-communication IC, and signal-processing semiconductor categories. It is intended for embedded equipment that requires reliable modem connectivity over a two-wire telephone pair rather than a modern packet-based network.
The principal functional characteristics include a maximum listed data rate of 2.4 kbps, support for five named modulation or signaling protocols, a single 3 V to 3.6 V supply range, and a 24-TSSOP surface-mount package. Its gull-wing lead geometry and rectangular body support conventional PCB assembly. These characteristics make the part suitable for legacy access equipment, embedded data terminals, industrial communication controllers, and retrofitted telecommunications systems.
The SI2404-C-FTR is identified as an ISOModem system-side DAA rather than a complete voice-grade modem. This distinction matters because the companion line-side interface, isolation requirements, transformers, connectors, and external interface circuitry remain part of the complete telephone-line design. The chip concentrates modulation, demodulation, and data-conversion functions into one mixed-signal IC while leaving board-level network coupling and protection to the designer.
Typical deployments include data-only terminal equipment, remote monitoring systems, access concentrators, and legacy industrial controllers that communicate over switched or dedicated telephone lines. Designers should treat the 2.4 kbps operating rate as the principal bandwidth constraint: it favors reliable low-volume character or control traffic rather than bulk file transfer, audio streaming, or high-speed internet access. Bell protocol compatibility also affects interoperability with the intended remote modem and central-office equipment.
Layout is critical because the modem codec bridges digital logic and analog telephone-line signaling. Place decoupling and analog interface components according to the manufacturer's reference layout, keep sensitive analog traces away from fast digital return currents, and use controlled ground connections to minimize conversion noise. Because lifecycle information and a complete pin description are not stated on the product listings, verify availability, pin functions, and electrical limits with the manufacturer before beginning a new production design.
This page consolidates the known device identity, package information, protocol support, sourcing links, replacement candidates, comparison parameters, and practical design guidance into one engineering-focused reference. It is intended to support initial component selection while keeping unresolved electrical, lifecycle, and pin-level details visible for manufacturer confirmation.
جایگزینهای drop-in برای SI2404-C-FTR — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای SI2404-C-FTR (همان فرمفاکتور و فوتپرینت) — متفاوت در Product Type, Package, RoHS Status, Device Type, Package Type.
SI2404-D-GT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
SI2404-D-FS
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←SI2404-C-FSR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←SI2457-C-FT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←SI2457-C-FTR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SI2404-C-FTR مشخصات
| Device Type | ISOmodem codec IC |
| Modem Role | System-side DAA |
| Maximum Listed Data Rate | 2.4 kbps |
| Chipset Data Rate | 56 kbps |
| Supported Protocols | Bell 103, Bell 212A, V.21, V.22, V.23, V.29 |
| Supply Voltage Range | 3 V to 3.6 V |
| بستهبندی | 24-pin TSSOP |
| Package Code | TSSOP |
| Package Width | 4.40 mm (0.173 in) |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Number of Terminals | 24 |
| نوع نصب | Surface mount |
| Temperature Grade | Commercial |
راهنمای پیکربندی پین SI2404-C-FTR rectangular
پیکربندی پین برای SI2404-C-FTR (پکیج rectangular). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای SI2404-C-FTR.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
SI2404-C-FTR مناسب است برای 6 کاربردs: Legacy Telephone-Line Data Terminal, Industrial Remote Monitoring, Access Concentrator, Embedded Telemetry Controller, Legacy Communication Equipment Maintenance, Point-of-Sale and Authentication Terminal.
Legacy Telephone-Line Data Terminal
SI2404-C-FTR fits a data-only terminal that must communicate through a two-wire telephone line using Bell or V-series modem signaling. Its listed 2.4 kbps rate is sufficient for command messages, short telemetry blocks, and remote-control traffic, while support for Bell 103, Bell 212A, V.21, V.22, V.23, and V.29 provides interoperability with established modem equipment. The 3 V to 3.6 V supply suits compact embedded systems, and the 24-pin TSSOP package permits conventional surface-mount assembly. Designers must still add the required line coupling, isolation, protection, and interface circuitry.
پیشنهادی
Industrial Remote Monitoring
SI2404-C-FTR can support a remote industrial monitor that transfers periodic readings over a dedicated telephone circuit. The 2.4 kbps line rate favors compact status, alarm, and configuration packets rather than continuous high-volume telemetry. Its commercial-grade 24-pin TSSOP package is practical for embedded control boards, while the listed Bell and V-series protocols allow the equipment to connect with widely deployed remote modem infrastructure. Practical deployment requires line conditioning, surge protection, call-control logic, and an architecture that tolerates variable telephone-network latency and disconnections.
پیشنهادی
Access Concentrator
A legacy access concentrator can use the SI2404-C-FTR when each channel requires interoperable low-speed modem signaling over copper pairs. The device's system-side DAA role and listed 2.4 kbps operation help partition modem functions between the digital controller and the analog network interface. The 24-TSSOP package supports compact multi-channel equipment, but each line still needs its own compliant network-coupling and protection path. Confirm channel timing, multiplexing requirements, and thermal conditions in the manufacturer documentation before scaling the design across several subscriber ports.
پیشنهادی
Embedded Telemetry Controller
SI2404-C-FTR is appropriate for an embedded controller that periodically exchanges data with a central host over a telephone line. Its 2.4 kbps operation is adequate for telemetry frames, diagnostic logs, configuration commands, and acknowledgment traffic, while the selection of established Bell and V-series modes improves compatibility with existing host equipment. The 3 V to 3.6 V operating range integrates cleanly into embedded systems, and the TSSOP package avoids through-hole assembly. Firmware should include timeout, retry, line-quality, and call-establishment logic because modem links can experience variable delay and impairment.
پیشنهادی
Legacy Communication Equipment Maintenance
SI2404-C-FTR is useful when repairing or extending installed communication equipment that uses the listed Bell and V-series modem modes. Preserving the 24-pin TSSOP architecture can reduce the scope of a board redesign, provided the exact pinout, clocking, protocol configuration, and analog interface match the original equipment. The commercial temperature grade is suitable for controlled indoor or industrial enclosures, but field conditions must be reviewed against the complete electrical ratings. During maintenance, verify component traceability and compare each external network component before substituting a newer ISOmodem family.
پیشنهادی
Point-of-Sale and Authentication Terminal
SI2404-C-FTR can serve as the communications element of a point-of-sale terminal or authentication device that depends on a legacy modem connection. Transaction authorization and short coded messages fit within the listed 2.4 kbps modem mode, while supported Bell and V-series protocols offer deployment options across established telephone infrastructure. The surface-mount 24-TSSOP package supports compact board construction, and the 3 V to 3.6 V supply fits many embedded controllers. Security, session timeout, and channel-selection functions remain firmware responsibilities, and the analog telephone interface still requires compliant protection and isolation.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای SI2404-C-FTR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | SI2404-D-GT | SI2404-D-FS | SI2404-C-FSR | SI2457-C-FT | SI2457-C-FTR |
|---|---|---|---|---|---|---|
| Package | 24-TSSOP | 24-TSSOP | 24-TSSOP | 24-TSSOP | 24-TSSOP | 24-TSSOP |
| Brand | Skyworks Solutions, Inc. | Skyworks Solutions, Inc. | Skyworks Solutions, Inc. | Skyworks Solutions, Inc. | Skyworks Solutions, Inc. | Skyworks Solutions, Inc. |
تفاوتهای کلیدی
- Directly identified legacy protocol support (در مقابلSI2404-D-GT)
- Lower-rate operation aligned with control traffic (در مقابلSI2457-C-FT)
- Complete listing of system-side protocol names (در مقابلSI2404-C-FSR)
یادداشتهای طراحی
Treat the SI2404-C-FTR as a mixed-signal device and follow the manufacturer's reference layout exactly. Place input and output bypass capacitors at the associated pins rather than at convenient board locations, provide a continuous ground reference beneath the device, and isolate sensitive analog traces from digital clocks and switching return currents. Keep telephone-network coupling components away from digital signal paths to reduce differential noise and false-start sensitivity.
Design the 3 V to 3.6 V supply rail with low noise and adequate transient margin. Check the complete manufacturer electrical table before fixing capacitor values, clock levels, or digital input thresholds. Use the same general sequence shown in the recommended application circuit: establish the supply before enabling modem signaling, and avoid allowing ringing or line-interface transients to propagate onto the low-voltage codec supply.
Do not assume that two 24-pin TSSOP modem ICs are interchangeable solely because their packages match. Before replacing SI2404-C-FTR with SI2404-D-GT, SI2404-D-FS, or an SI2457 device, compare every pin name, supply threshold, protocol mode, clock connection, timing requirement, and external DAA component. A new PCB should also include a documented fallback for legacy telephone-line systems where supply continuity and long-term product maintenance are important.
Use a controlled analog and digital ground strategy that follows the manufacturer's guidance. The system-side modem codec interfaces with a sensitive telephone-network front end, so indiscriminate splitting of the ground plane can create return-current discontinuities and increase noise. Confirm the exposed requirements, test points, and analog isolation structure in the manufacturer reference design before freezing the PCB stack-up and component placement.
اطلاعات انطباق
The exact SI2404-C-FTR product listings do not explicitly state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. RoHS wording appearing in comparison records for other variants was not transferred to this exact MPN.