Skyworks Solutions

SI3068-B-FT - Integrated V.92 DAA Interface IC | Skyworks

N.º da peça: SI3068-B-FT ✗ Fim de vida
9 mA Vdss Integrated Id 10-MSOP, 0.118 inch width, 3.00 mm width Package
MOQ: 1 |

SI3068-B-FT Visão geral

Skyworks Solutions SI3068-B-FT is an integrated direct access arrangement (DAA) for a system-side module, combining a V.92-quality codec, DC termination, AC termination, and an integrated hybrid in a 10-MSOP package. The device operates from a 9 mA supply and is packaged as a surface-mount component in a tube containing 50 units.

A direct access arrangement is the line-side interface between a telephone network and a data-processing system. In this product category, the DAA integrates functions that might otherwise require a discrete analog front end, isolation transformer, relays, optoisolator, and a two-wire-to-four-wire hybrid. The SI3068-B-FT is therefore positioned as a compact interface IC for modem and system-side communication equipment rather than as a general-purpose signal-processing device.

The principal feature is integration of the V.92-quality codec with DC termination, AC termination, and the hybrid circuitry. This integration reduces the number of external line-interface components required by a system-side DAA implementation. The 10-pin MSOP format supports compact surface-mount layouts, while the 9 mA supply current provides a defined operating point for power-budget analysis in line-powered and powered communication equipment.

The SI3068-B-FT belongs to a specialized telecom-interface family whose architecture targets compact system-side modules. Its design consolidates the codec and hybrid-related functions into one IC, supporting manufacturers that want to reduce board area and component count. Because the integration changes the external design requirements, layouts should be based on the pin-description table, recommended application circuit, and decoupling guidance in the manufacturer datasheet rather than on generic analog-layout assumptions.

Typical uses include V.92 modem hardware, system-side DAA modules, telephone-line data equipment, central-office line-card interfaces, and compact embedded communications platforms. In these systems, the IC can serve as the central line-side interface when the host processor or modem subsystem requires a compact integrated DAA rather than discrete termination and hybrid components.

Designers should verify the exact pin assignments, external component requirements, operating voltage, clocking method, line-side impedance settings, and temperature limits in the manufacturer datasheet before layout release. The 10-MSOP package has a narrow pin pitch, so land-pattern accuracy, solder-paste control, and careful routing around high-impedance line-interface nodes are important. Tube packaging should also be handled according to the manufacturer’s moisture-sensitivity and reflow requirements.

This product record combines the SI3068-B-FT ordering information, manufacturer datasheet, package data, lifecycle indication, replacement analysis, and application guidance into an engineering-focused resource. It helps designers distinguish the tube-packaged FT ordering code from related FS and FTR variants while focusing attention on the verified V.92 DAA function, 9 mA supply current, and 10-MSOP implementation.

Alternativas drop-in para SI3068-B-FT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

SI3068-B-FTR

✅ Drop-In
📦 10-MSOP
Same SI3068-B-FT device and 10-MSOP electrical package; ordering format changes from a 50-unit tube to tape and reel, with no verified electrical difference.

📋 Alternativa de referência (fora do catálogo)

SI3068-B-FS

✅ Drop-In
📦 10-MSOP
Related SI3068 DAA ordering code with the same 10-MSOP family package; exact suffix-specific electrical and temperature differences are not stated.

📋 Alternativa de referência (fora do catálogo)

SI3068-B-FT Especificações

Product Type Integrated direct access arrangement (DAA) interface IC
Codec Standard V.92 quality
DC Termination Integrated
AC Termination Integrated
Hybrid Circuitry Integrated
Corrente de alimentação 9 mA
Number of Circuits 1 circuit
Encapsulamento 10-MSOP, 0.118 inch width, 3.00 mm width
Alternate Package Designation 10-TFSOP
Tipo de montagem Surface Mount (SMT)
Packaging Type Tube
Standard Package Quantity 50 units
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Guia de Configuração de Pinos do SI3068-B-FT 50 units

Configuração de pinos para SI3068-B-FT (pacote 50 units). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 50 units para SI3068-B-FT

Nenhum dado detalhado de pinagem disponível para SI3068-B-FT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SI3068-B-FT é adequado para 6 aplicaçãos: V.92 System-Side Modem, Central-Office Line Card, Telephone-Line Data Terminal, Embedded Communications Platform, Industrial Telemetry Gateway, Network Voice Adapter.

🌐

V.92 System-Side Modem

The SI3068-B-FT fits a V.92 system-side modem because the manufacturer identifies a V.92-quality codec, DC termination, AC termination, and integrated hybrid in one 10-MSOP device. This consolidates the principal line-interface functions into one IC and can reduce the board area occupied by discrete termination, transformer-interface, and analog-front-end circuitry. The defined 9 mA supply current also provides a concrete starting point for the modem’s power budget. Implementers should reproduce the manufacturer application circuit, external line-network values, and decoupling arrangement to preserve signal and ringing behavior.

🏭

Central-Office Line Card

A central-office line card can use the SI3068-B-FT where each channel requires an integrated voice-band line interface rather than a collection of discrete termination and hybrid components. The single-circuit 10-MSOP implementation supports compact channel layouts, while the V.92-quality codec provides a defined modulation path. Its 9 mA operating supply current is useful when estimating thermal load across many channels. Before production, verify the card’s line impedance, protection network, isolation boundary, clocking, and exact pin assignments against the manufacturer datasheet.

📞

Telephone-Line Data Terminal

The SI3068-B-FT is suitable for a telephone-line data terminal that needs a compact V.92-quality line-side DAA. Integrating the codec, DC termination, AC termination, and hybrid reduces the number of separate line-interface blocks and can shorten the path between the analog line and the modem logic. The 10-MSOP package allows the interface to be placed close to the line-network components, which is valuable in compact terminal designs. Use the specified 9 mA supply condition as the electrical baseline and follow the manufacturer layout for all sensitive nodes.

🧩

Embedded Communications Platform

An embedded communications platform can place the SI3068-B-FT beside a host processor or modem controller when a standardized V.92 line interface is required. The 10-MSOP package provides a manageable surface-mount footprint, and the integrated hybrid and termination functions allow the design to avoid a larger discrete analog front end. Because the device is listed as obsolete, engineers should first confirm lifecycle availability and the suitability of the exact ordering code. The 9 mA supply current and 10-pin layout should be included in the platform’s thermal and PCB planning.

🏭

Industrial Telemetry Gateway

A legacy industrial telemetry gateway can use the SI3068-B-FT when its modem still relies on a V.92-quality telephone-line interface. The integration of the codec and termination circuitry reduces maintenance complexity compared with a board containing many discrete line-interface components. The 10-MSOP format also allows replacement within an existing compact design if the land pattern and pinout match. Because lifecycle status is obsolete, validate the operating temperature, supply voltage, and external component values before approving the part for sustained industrial use.

🔧

Network Voice Adapter

The SI3068-B-FT can support a dedicated network voice adapter that bridges a telephone line and digital processing circuitry. Its V.92-quality codec provides the voice-band conversion function, while integrated DC termination, AC termination, and hybrid circuitry simplify the line-side front end. The 9 mA operating supply current allows engineers to estimate the adapter’s contribution to the overall power envelope. Reproduce the manufacturer’s recommended network and component values, and treat the obsolete designation as a production-risk item requiring explicit lifecycle approval.

Resumo dos produtos recomendados

SI3019-F-FSR Related Silicon Labs system-side modem interface family member Usado em: V.92 System-Side Modem, Central-Office Line Card, Telephone-Line Data Terminal, Embedded Communications Platform, Industrial Telemetry Gateway, Network Voice Adapter
What is the SI3068-B-FT?
The SI3068-B-FT is an integrated direct access arrangement for a system-side communications module. According to the manufacturer datasheet, it combines a V.92-quality codec, DC termination, AC termination, and an integrated hybrid in a 10-MSOP package. This integration replaces a discrete combination of analog front end, isolation transformer, relays, optoisolator, and a two-wire-to-four-wire hybrid.
What functions are integrated into the SI3068-B-FT?
The SI3068-B-FT integrates a V.92-quality codec, DC termination, AC termination, and the hybrid circuitry into one interface IC. The manufacturer datasheet identifies a 9 mA supply current, one circuit, and a 10-MSOP surface-mount package. This integration is intended to reduce the external component count in compact system-side DAA equipment.
Where can I download the SI3068-B-FT datasheet PDF?
The SI3068-B-FT datasheet PDF is available through the manufacturer-hosted document linked on this page. It describes the integrated DAA architecture, codec, termination functions, supply characteristics, package, and application guidance. Use the manufacturer datasheet as the authoritative source for pin assignments and recommended external circuitry when laying out a replacement design.
Where can I find the SI3068-B-FT pinout?
The SI3068-B-FT pin assignments are defined in the pin-description table of the manufacturer datasheet. The device uses a 10-MSOP package, so the diagram contains ten numbered positions corresponding to the physical footprint. Confirm every signal, supply, ground, and no-connect designation against the datasheet before assigning PCB tracks or reproducing an existing board.
What package does the SI3068-B-FT use?
The SI3068-B-FT uses a 10-MSOP surface-mount package, also identified in the product listing as a 10-TFSOP package with a 0.118-inch, or 3.00 mm, body width. The ordering code is supplied in a tube with a standard quantity of 50 units. The related FTR ordering code represents a tape-and-reel packaging option rather than a different functional device.
Can SI3068-B-FTR replace SI3068-B-FT?
The SI3068-B-FTR is the tape-and-reel ordering variant associated with the same SI3068-B-FT device, so it can be used as a functional replacement when its package details and electrical specifications match the assembled board. The FT ordering code is supplied in a tube, whereas the FTR code is supplied on tape and reel. Confirm reel orientation, moisture handling, and exact MPN requirements before substitution.
Can SI3068-B-FS replace SI3068-B-FT?
The SI3068-B-FS can be considered only after its exact package, temperature grade, supply range, and pin mapping are checked against the SI3068-B-FT design. Both codes belong to the SI3068 family, but the visible ordering information does not establish every electrical difference. Use the manufacturer datasheet and approved cross-reference record before treating the FS part as a drop-in replacement.
What is the best drop-in replacement for SI3068-B-FT?
The closest confirmed ordering alternative is the SI3068-B-FTR, which changes the delivery format from a tube to tape and reel while retaining the SI3068-B-FT device identity. The SI3068-B-FS is a related family member, but it should not be treated as an unconditional drop-in until package and electrical compatibility are confirmed. Request a replacement review using the Request a Quote form on this page.
What is the difference between SI3068-B-FT and SI3068-B-FTR?
The principal visible difference between SI3068-B-FT and SI3068-B-FTR is the shipping format: the FT ordering code is supplied in a tube of 50 units, while the FTR code is the tape-and-reel option. Both identify the same SI3068-B-FT product family and 10-MSOP device. For automated pick-and-place production, the FTR format can simplify reel handling, subject to orientation verification.
Is the SI3068-B-FT suitable for a V.92 system-side modem?
The SI3068-B-FT is suitable for a V.92 system-side modem because the manufacturer describes it as an integrated DAA with a V.92-quality codec, integrated termination, and integrated hybrid circuitry. The 9 mA supply-current specification supports compact line-interface designs. Final suitability depends on the host interface, line impedance, external network, and timing requirements defined in the application circuit.
When should I choose SI3068-B-FT instead of a discrete DAA implementation?
Choose the SI3068-B-FT when board area and external component count are more important than building termination and hybrid circuitry from discrete components. The integrated V.92-quality codec, DC termination, AC termination, and hybrid can simplify a system-side modem design. Retain a discrete approach when unique line-network requirements, isolation strategy, or production economics outweigh the benefits of a standardized integrated DAA.
Is SI3068-B-FT the same as SI3068-B-FS?
The SI3068-B-FT and SI3068-B-FS are related SI3068 ordering codes, but they should not be assumed electrically and mechanically identical without reviewing the exact suffix definitions. The FT listing identifies a 10-MSOP tube package, while separate FS documentation exists for another ordering configuration. Compare pinout, package, temperature grade, supply limits, and lifecycle requirements before substitution.
Where can I buy SI3068-B-FT with current availability?
Use the Request a Quote form on this page to request current SI3068-B-FT availability, condition, and lead time. The part is marked obsolete in the listed product documentation, so an existing assembly may require a lifecycle review rather than a routine new-design procurement. Provide the required quantity, tube packaging preference, and any inspection requirements with the request.
What is the price and lead time for SI3068-B-FT?
Current price and lead time for SI3068-B-FT should be obtained through the Request a Quote form on this page. The component is identified as obsolete, so availability may depend on remaining factory or inventory stock rather than normal production scheduling. Include your annual usage, forecast horizon, acceptable date code, and tube-packaging requirement when requesting a quotation.
What are the key specifications of SI3068-B-FT that engineers should know?
The key SI3068-B-FT specifications are its integrated V.92-quality DAA function, 9 mA supply current, 10-MSOP surface-mount package, one internal circuit, and tube packaging with 50 units. The device also integrates DC termination, AC termination, and the hybrid, reducing the need for a discrete analog front end and isolation components. The manufacturer datasheet defines the remaining electrical and pin-level requirements.
What is the lifecycle status of SI3068-B-FT?
SI3068-B-FT is listed as obsolete in the product documentation. Existing equipment may still contain the device, but new designs should confirm availability, traceability, and long-term support before committing to it. Use the Request a Quote form on this page for current inventory and condition information, and include the original equipment requirements in the request.
How should the SI3068-B-FT be laid out for signal integrity?
Place the SI3068-B-FT and its required external components according to the manufacturer application circuit, with particular care around the line-side and hybrid-related nodes. The 10-MSOP footprint has a narrow pitch and limited pin spacing, so use the recommended land pattern and solder-paste volume. Preserve the specified grounding and decoupling topology, and avoid adding long copper stubs to sensitive interface nodes.

Dados de referência de engenharia para SI3068-B-FT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the SI3068-B-FT for a legacy or service design that specifically requires the FT ordering code, a 10-MSOP footprint, and an integrated V.92-quality system-side DAA. Select SI3068-B-FTR when the electrical device is suitable but the production line requires tape-and-reel presentation; it changes the shipping format rather than the core function. Consider SI3068-B-FS only after its suffix-specific pinout, package, supply limits, temperature grade, and component requirements have been checked against the original SI3068-B-FT design. No verified cross-brand drop-in equivalent was identified, so changing manufacturers is not a straightforward PCB-level decision. Because SI3068-B-FT is listed as obsolete, new designs should first obtain lifecycle approval, current availability, and a condition report through the Request a Quote form on this page.

Comparação com alternativas

Parâmetro Este produto SI3068-B-FTR SI3068-B-FS
Package 10-MSOP 10-MSOP 10-MSOP
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions
Device Function Integrated V.92-quality DAA Integrated V.92-quality DAA FCC+ embedded DAA
DC Termination Integrated Integrated Integrated
AC Termination Integrated Integrated Integrated
Hybrid Circuitry Integrated Integrated Integrated

Principais diferenciais

  • Integration reduces the required discrete line-interface blocks (vs SI3068-B-FS)
  • Direct tube-packaged ordering configuration (vs SI3068-B-FTR)
  • Defined low operating supply current (vs SI3068-B-FS)

Notas de projeto

Use the manufacturer’s 10-MSOP land pattern and place the required external network components close to their associated pins. Keep sensitive line-side and hybrid nodes short, avoid unnecessary copper extensions, and route return-current paths continuously to the device ground reference. Confirm the pin-description table before assigning tracks because the public listing confirms the package but does not provide a complete numbered pin map.

Do not substitute only on the basis of the SI3068 family name. Confirm the suffix-specific package, operating voltage, temperature grade, pin mapping, and external component values before using SI3068-B-FS as a replacement. The FT and FTR codes identify different shipping formats, with FT supplied in a tube and FTR supplied on tape and reel, so production automation and moisture-handling requirements can differ.

Budget the SI3068-B-FT from its stated 9 mA operating supply current and apply the actual system supply voltage to calculate device power. Estimated: P = 9 mA × VIN; for example, a 3.3 V rail produces 29.7 mW if the device operates at that voltage. Confirm the permitted supply range and operating mode in the manufacturer datasheet before using this estimate as a design limit.

Treat the codec, termination, and hybrid sections as one coordinated line-interface subsystem. Preserve the recommended component values and placement because changing termination balance can alter line impedance, return loss, or codec performance. If the PCB differs from the reference design, validate the interface with line-network measurements and compare voice-band operation across worst-case line conditions.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device is a telecom interface IC rather than an automotive component. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SI3068-B-FT datasheet SI3068-B-FT pinout SI3068-B-FT datasheet pdf SI3068-B-FT equivalent SI3068-B-FT replacement SI3068-B-FT cross reference SI3068-B-FT schematic SI3068-B-FT application circuit SI3068-B-FT 10-MSOP SI3068-B-FT V.92 DAA SI3068-B-FT price SI3068-B-FT stock Skyworks SI3068-B-FT SI3068-B-FT vs SI3068-B-FTR SI3068-B-FT obsolete replacement

Componentes & termos relacionados

Skyworks Solutions Silicon Labs SI3068-B-FT SI3068-B-FTR SI3068-B-FS Direct access arrangement DAA Telecom interface IC V.92 codec DC termination AC termination Integrated hybrid Analog front end Isolation transformer Optoisolator Two-wire-to-four-wire hybrid 10-MSOP Surface mount SMT Tube packaging Tape and reel System-side module Telephone-line data equipment Silicon Labs Si3068 Obsolete component lifecycle
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ