onsemi

SN74LS240M - 8-Channel 3-State Inverting Buffer | onsemi

N.º da peça: SN74LS240M ✓ Ativo
4.75 V to 5.25 V Vdss SOEIAJ-20 surface-mount package Package
MOQ: 1 |

SN74LS240M Visão geral

The onsemi SN74LS240M is an 8-channel bipolar inverting buffer and line driver with 3-state outputs, designed for operation from a 4.75 V to 5.25 V supply in an SOEIAJ-20 surface-mount package. Each device contains two 4-bit channels, and each output can be placed in the high-impedance state for shared-bus operation. The three-state capability allows multiple drivers to share a bus when only one device is actively driving at a time.

A logic buffer is a digital integrated circuit that reproduces an input signal while providing buffering, isolation, and drive capability. A line driver strengthens digital signals for transmission across circuit-board traces or between logic sections. A bus transmitter combines that drive function with a three-state output, allowing the output to disconnect electrically when it is not selected. The SN74LS240M belongs to the 74LS bipolar logic family and is positioned within the hierarchy of logic integrated circuits, digital interface devices, and bus-oriented transmitters.

The principal features are eight individually controlled inverting outputs, 4.75 V to 5.25 V operating voltage, and three-state output operation. Inverting operation means a low input level produces a high output level, while a high input level produces a low output level. Input hysteresis helps improve noise margins by defining distinct transition regions near the switching threshold. The device is intended for memory-address driving, clock driving, and general bus-oriented signal transmission where higher board density is useful.

The SN74LS240M combines LS-series bipolar logic behavior with the practical benefits of a compact surface-mount package. Its inverting outputs are useful when a system requires complementary phase relationships or inversion between two logic stages. Because three-state outputs can be disabled, designers can prevent contention on shared data, address, or control buses by ensuring that only one driver is enabled during each transfer interval.

Typical uses include memory and peripheral interface logic, buffered clock distribution, industrial control boards, computer bus interfaces, and embedded systems requiring a compact octal bus transmitter. In a shared-bus arrangement, output-enable signals determine which driver owns the bus, while the other devices maintain high-impedance outputs. This arrangement reduces electrical loading and helps prevent simultaneous-output contention.

PCB design should provide a continuous ground plane, minimize return-current-loop area, and place input and output paths away from noisy switching nodes. Because the device is a bipolar logic part, supply and ground connections should be decoupled near the package, and unused inputs should be tied to a defined logic level rather than left floating. This page combines the device function, package information, replacement guidance, and practical interface considerations for faster engineering selection.

Alternativas drop-in para SN74LS240M — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

SN74LS240DM

✅ Drop-In ⚠️ Especificações não verificadas
📦 SOEIAJ-20
Same eight inverting three-state outputs and 4.75 V to 5.25 V supply family; ordering-code temperature grade is not separately stated

📋 Alternativa de referência (fora do catálogo)

SN74LS240M

✅ Drop-In
onsemi
📦 SOEIAJ-20
8 channels · 2 elements × 4 bits per element · Inverting buffer and line driver · 3-state output · 4.75 V to 5.25 V · Bipolar · SOEIAJ-20 surface-mount package · 20 pins

Consulte o preço

Ver ficha técnica →

SN74LS240A DM

✅ Drop-In ⚠️ Especificações não verificadas
📦 SOEIAJ-20
Same function and package family with an A-series ordering designation; electrical timing differences are not separately quantified

📋 Alternativa de referência (fora do catálogo)

SN74LS240A M

✅ Drop-In ⚠️ Especificações não verificadas
📦 SOEIAJ-20
Same inverting three-state function and package family with an A-series ordering designation; timing differences are not separately quantified

📋 Alternativa de referência (fora do catálogo)

SN74LS240M Classificações máximas e características elétricas

Number of Channels 8 channels
Channel Organization 2 elements × 4 bits per element
Logic Type Inverting buffer and line driver
Tipo de saída 3-state output
Supply Voltage Range 4.75 V to 5.25 V
Technology Bipolar
Encapsulamento SOEIAJ-20 surface-mount package
Contagem de pinos 20 pins
Tipo de montagem Surface mount
Input Hysteresis Present

Guia de Configuração de Pinos do SN74LS240M soeiaj-20 surface-mount package

Configuração de pinos para SN74LS240M (pacote soeiaj-20 surface-mount package). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote soeiaj-20 surface-mount package para SN74LS240M

Nenhum dado detalhado de pinagem disponível para SN74LS240M.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SN74LS240M é adequado para 6 aplicaçãos: Memory Address Driving, Buffered Clock Distribution, Shared Peripheral Data Bus, Industrial Control Interface, Embedded System Bus Isolation, Digital Signal Fan-Out.

🖥️

Memory Address Driving

The SN74LS240M is suitable for driving memory-address lines because it provides eight inverting, three-state outputs in a compact 20-pin surface-mount package. Its 4.75 V to 5.25 V operating range matches a 5 V TTL-style bus environment, while input hysteresis improves noise margins around logic transitions. When several address or expansion buffers share a bus, output-enable control can hold unused drivers in the high-impedance state and reduce loading. The design must also account for the intentional inversion between each input and output and ensure that only one driver is enabled on any shared node.

🖥️

Buffered Clock Distribution

The SN74LS240M can distribute clock signals where inversion is acceptable and additional drive strength is useful. Each of its eight outputs is independently controlled through the three-state enable function, allowing unused clock paths to be disconnected. The 4.75 V to 5.25 V supply range supports conventional 5 V logic systems, and input hysteresis helps reduce response to noise near the switching threshold. Engineers should verify propagation-delay and transition requirements for the selected source before using multiple outputs on a shared clock node.

🌐

Shared Peripheral Data Bus

The SN74LS240M fits shared peripheral buses that require wired-connection capability without simultaneous-output contention. Each inverting output can be disabled, allowing the controller to connect one driver at a time while other devices present a high impedance to the same bus. The octal organization permits multiple byte-wide interfaces, and the compact SOEIAJ-20 package supports density-oriented boards. Firmware and hardware must maintain mutually exclusive output-enable timing, while the logic design must account for the deliberate input-to-output inversion.

🏭

Industrial Control Interface

The SN74LS240M can serve as a compact interface buffer in 5 V industrial control electronics, particularly where control lines originate from older TTL-compatible logic and require stronger drive or bus isolation. Its three-state outputs let a controller select one of several interfacing circuits without electrically loading every destination. Input hysteresis supports operation where signal traces pass near moderate switching noise. The exact temperature grade should be checked for the installation environment, and unused inputs should be tied to a defined logic level.

🧩

Embedded System Bus Isolation

The SN74LS240M is useful between embedded subsystems that share legacy 5 V control or peripheral buses and require local buffering. Eight inverting outputs can support multiple control signals in one device, while the three-state function allows isolation from a bus when the associated subsystem is inactive. Its surface-mount SOEIAJ-20 package helps conserve board area compared with a through-hole octal package. The interface should be designed with consistent enable defaults so an inactive or reset controller cannot contend with another driver.

🔧

Digital Signal Fan-Out

The SN74LS240M can fan out one-sided logic signals to multiple destinations when inversion is acceptable. Independent output-enable control provides flexibility for placing selected outputs in the high-impedance state, while the eight-channel organization reduces the number of packages needed for multi-bit interfaces. The 4.75 V to 5.25 V supply range places it in a 5 V logic environment, and the input hysteresis feature helps distinguish valid levels in the presence of moderate trace noise. Signal timing and fan-out loading must be checked against the manufacturer specifications.

Resumo dos produtos recomendados

SN74LS240 Base octal inverting buffer and line-driver function Usado em: Memory Address Driving, Buffered Clock Distribution, Shared Peripheral Data Bus, Industrial Control Interface, Embedded System Bus Isolation, Digital Signal Fan-Out SN74LS244 Related non-inverting three-state line driver Usado em: Memory Address Driving, Buffered Clock Distribution, Shared Peripheral Data Bus, Industrial Control Interface, Embedded System Bus Isolation, Digital Signal Fan-Out
What is the SN74LS240M?
The SN74LS240M is an onsemi 8-channel bipolar inverting buffer and line driver with 3-state outputs in an SOEIAJ-20 package. It contains two 4-bit channels and operates from 4.75 V to 5.25 V. According to the onsemi SN74LS240 documentation, it is intended for memory-address driving, clock driving, and bus-oriented transmission, where three-state outputs permit multiple devices to share a bus.
What is the operating voltage of SN74LS240M?
The SN74LS240M operates from 4.75 V to 5.25 V. Texas Instruments describes the SN74LS240 family as bipolar inverters with three-state outputs for the same 5 V operating range. This voltage range is important for system compatibility because the device must receive a valid 5 V logic supply while driving other TTL-compatible circuits.
Where can I download the SN74LS240M datasheet PDF?
The SN74LS240M datasheet can be obtained through the onsemi datasheet page linked on this product page or through the Texas Instruments SN74LS240 product page. The onsemi document covers the SN74LS240 and SN74LS240M devices, including their buffering, logic, and package information. Use the manufacturer's PDF for authoritative ordering codes, limits, and electrical characteristics.
Where can I find the SN74LS240M pinout?
The SN74LS240M pinout is shown in the manufacturer datasheet for the SOEIAJ-20 package. It is a 20-pin device containing two four-bit inverting channels, with output-enable control and ground connections in addition to the data inputs and outputs. Assign PCB nets from the package drawing and pin-description table rather than relying only on a generic 74LS240 diagram.
Can SN74LS240M drive a shared bus?
Yes, the SN74LS240M can drive a shared bus because every output supports a high-impedance state. Only one driver should be enabled while it owns the bus; other connected devices must disable their outputs to prevent contention. The onsemi SN74LS240 datasheet identifies the device as a bus-oriented transmitter and line driver.
What is the difference between the SN74LS240M and SN74LS244?
The SN74LS240M provides eight inverting outputs, while the SN74LS244 provides non-inverting outputs. Both are described by onsemi as octal buffers and line drivers with three-state outputs, and both are intended for memory-address, clock, and bus-driving applications. Choose the SN74LS240M when polarity inversion is required; choose the SN74LS244 when the output must preserve input polarity.
When should I choose SN74LS240M over a non-inverting buffer?
Choose the SN74LS240M when the receiving circuit requires an inverted logic signal or when inversion simplifies phase alignment. The SN74LS240M contains eight inverting three-state outputs, making it appropriate for address buses, clock distribution, and shared control buses. Use a non-inverting alternative only when preserving input polarity is mandatory.
What can replace the SN74LS240M?
A valid replacement must use the same 20-pin footprint, provide the same eight inverting three-state outputs, and operate from a compatible 4.75 V to 5.25 V supply. The SN74LS240M suffix identifies the SOEIAJ-20 surface-mount package, so a DIP or differently ordered package is not a drop-in replacement. Confirm enable polarity and timing against the selected manufacturer datasheet before substitution.
Is SN74LS240M the same as SN74LS240?
The SN74LS240M is the surface-mount ordering variant of the SN74LS240 function and is identified in distributor listings as onsemi SOEIAJ-20. The base SN74LS240 name describes the family, while the M suffix selects a particular package configuration. Package dimensions, pin assignments, temperature grade, and lifecycle conditions must be checked before treating two differently suffixed orders as interchangeable.
What are the key specifications engineers should know about SN74LS240M?
The SN74LS240M has eight inverting outputs, 3-state output capability, 4.75 V to 5.25 V operation, bipolar construction, and an SOEIAJ-20 surface-mount package. According to manufacturer information, it is organized as two four-bit elements and includes input hysteresis for improved noise margins. It is designed primarily for address, clock, and bus-oriented signal driving.
SN74LS240M vs SN74LS244 — which is better for a memory bus?
The SN74LS240M is better when the memory interface requires inverted outputs, while the SN74LS244 is better when signal polarity must remain unchanged. Both provide eight three-state line-driver outputs for address, clock, or bus use. Compare the receiving device's polarity requirements and the exact enable timing before selecting between the inverting and non-inverting versions.
Is the SN74LS240M suitable for industrial control applications?
The SN74LS240M is functionally suitable for industrial control and interface boards that use 5 V TTL-compatible logic and require three-state bus drivers. Its eight inverting outputs can address peripherals, clocks, or control buses. The device's exact temperature grade and environmental qualification should be confirmed for the target enclosure and operating conditions before production release.
How should unused inputs on the SN74LS240M be connected?
Unused SN74LS240M inputs should be tied to a defined valid logic level rather than left floating. The onsemi SN74LS240 documentation identifies input hysteresis as a feature for improving noise margins, but that feature does not make floating inputs acceptable. Consult the input-current and logic-level specifications in the manufacturer datasheet when choosing the pull-up or pull-down arrangement.
Where can I buy SN74LS240M and check current availability?
Use the Request a Quote form on this page to request SN74LS240M pricing, current availability, minimum order quantity, and lead time for the exact SOEIAJ-20 ordering configuration. The manufacturer and distributor listings on this page identify the M suffix as the surface-mount device. The quote request avoids stale stock information and ensures that the proposed supply matches the required package and manufacturer.
What is the price of SN74LS240M?
Current SN74LS240M pricing depends on quantity, package configuration, and market conditions, so the current unit price should be obtained through the Request a Quote form on this page. Request the exact MPN and required delivery quantity to receive an actionable quotation. Stock and lead time should be confirmed at the same time because both can change independently of the component's technical specifications.

Dados de referência de engenharia para SN74LS240M — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the SN74LS240M when a 5 V system needs eight inverting, three-state outputs and requires the SOEIAJ-20 surface-mount footprint. It is particularly suitable for memory-address, clock, and shared peripheral buses where inactive drivers must present a high impedance. Select the SN74LS244 when signal polarity must remain unchanged, and select the SN74LS240N only when a through-hole package is acceptable. For an onsemi source alternative, SN74LS240DM provides the closest same-family ordering option, while A-series variants should be selected only after checking their timing, temperature grade, and lifecycle specifications. Any replacement must preserve the 20-pin footprint, output-enable behavior, 4.75 V to 5.25 V supply compatibility, and required drive characteristics. Because the output polarity is inverted, do not choose this device merely because its function name resembles a conventional buffer; first confirm that downstream logic can tolerate the inversion.

Comparação com alternativas

Parâmetro Este produto SN74LS240DM SN74LS240M SN74LS240A DM SN74LS240A M
Package SOEIAJ-20 SOEIAJ-20 SOEIAJ-20 SOEIAJ-20 SOEIAJ-20
Brand onsemi onsemi Texas Instruments onsemi Texas Instruments
Number of Channels 8 channels 8 channels 8 channels 8 channels 8 channels
Logic Polarity Inverting Inverting Inverting Inverting Inverting
Output Type 3-state output 3-state output 3-state output 3-state output 3-state output
Logic Family Bipolar LS series Bipolar LS series Bipolar LS series Bipolar LS series Bipolar LS series
Primary Applications Memory-address, clock, and bus-oriented drivers Memory-address, clock, and bus-oriented drivers Memory-address, clock, and bus-oriented drivers Memory-address, clock, and bus-oriented drivers Memory-address, clock, and bus-oriented drivers

Principais diferenciais

  • Octal three-state inversion in one compact package (vs SN74LS244)
  • Shared-bus compatibility (vs SN74LS240DM)
  • Compact surface-mount implementation (vs SN74LS240N)

Notas de projeto

Never allow two enabled SN74LS240M outputs to drive the same net simultaneously. Although the three-state outputs permit shared-bus wiring, overlapping enable intervals can create output contention, excess current, and undefined voltage levels. Define enable defaults so all drivers remain high impedance during reset and establish non-overlapping control timing in the system logic.

Assign all 20 physical pins from the manufacturer pin-description table for the exact package ordering code. The device combines data inputs, outputs, output-enable controls, supply, and ground on a small surface-mount footprint. Keep the ground connection short, use an uninterrupted ground plane, and avoid routing input and output traces beneath noisy switching or clock-return paths.

Account for inversion when connecting external circuits because every SN74LS240M output is the complement of its corresponding input. For shared nets, place the driver close enough to the receiving devices to limit trace capacitance, and maintain controlled enable sequencing. Confirm propagation delay, output levels, and drive-current limits against the manufacturer datasheet for the selected ordering variant.

Use a stable 5 V supply within the stated 4.75 V to 5.25 V range and decouple the device close to its supply and ground pins. Because bipolar LS logic can draw different current depending on output state and switching activity, a quiet supply helps prevent output noise from affecting downstream logic. Use the manufacturer input-current and power-consumption data for final rail sizing.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The available manufacturer and distributor information identifies the device and package but does not state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

Buscas relacionadas

SN74LS240M datasheet SN74LS240M pinout SN74LS240M datasheet pdf SN74LS240M equivalent SN74LS240M replacement SN74LS240M cross reference SN74LS240M price SN74LS240M stock onsemi SN74LS240M SN74LS240M SOIC-20 SN74LS240M vs SN74LS244 SN74LS240M application circuit SN74LS240 5V three-state buffer SN74LS240 bus driver

Componentes & termos relacionados

onsemi SN74LS240M SN74LS240 SN74LS244 SN74LS240DM SN74LS240A DM SN74LS240A M Texas Instruments 8-channel inverting buffer line driver three-state output bipolar logic 74LS logic family TTL-compatible logic bus transmitter memory address driver clock driver input hysteresis noise margin high-impedance state SOEIAJ-20 SOIC-20 surface-mount package digital logic integrated circuit memory interface
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ