STMicroelectronics

STM32F100RCT6 - 24MHz Cortex-M3 MCU | STMicroelectronics

N.º da peça: STM32F100RCT6 ✓ Ativo
64-LQFP, 10 mm x 10 mm Package 24 MHz Speed 256 KB Memory
MOQ: 1 |

STM32F100RCT6 Visão geral

STMicroelectronics STM32F100RCT6 is an Arm Cortex-M3 32-bit microcontroller operating at 24 MHz, with 256 KB of Flash memory, 6 KB of RAM, and a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the STM32F100 value-line family, where the microcontroller combines general-purpose embedded processing with motor-control and consumer-electronics functionality in a compact surface-mount package.

A microcontroller is a semiconductor system that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, analog inputs, and interrupt controllers. The STM32F100 architecture follows the hierarchy microcontroller → 32-bit RISC MCU → Arm Cortex-M3 embedded controller → STM32F100 value-line family. Its 24 MHz Cortex-M3 core provides a practical balance of processing performance, memory capacity, and embedded peripheral integration for compact control systems.

The STM32F100RCT6 provides 256 KB of Flash for firmware and 6 KB of SRAM for working data. Its 32-bit architecture supports efficient handling of control tasks, while the high-density STM32F100RC device family is designed around motor-control and embedded-control applications. The 64-LQFP package provides 64 externally accessible pins, supporting a broad mix of general-purpose I/O and on-board functions while remaining compatible with established surface-mount manufacturing processes.

The Arm Cortex-M3 processor uses a Reduced Instruction Set Computer architecture and provides the core execution environment for interrupt-driven embedded software. At 24 MHz, the STM32F100RCT6 is intended for real-time control workloads where deterministic timer-based operation, serial communications, and mixed analog and digital control are useful. Its combination of 256 KB Flash and 6 KB RAM allows moderate protocol stacks and control logic to coexist without relying on external program-memory devices.

Typical uses include small motor controllers, consumer appliances, HVAC equipment, industrial control modules, sensor interfaces, and compact consumer-electronics products. The motor-control emphasis makes the device relevant to fan, pump, valve, and actuator designs where timers, control outputs, and status sensing must be handled by a compact embedded controller. The same MCU can also supervise sensors and manage communications in cost-sensitive embedded products.

PCB design should preserve clean supply and ground distribution, provide the required decoupling around the device, and route sensitive analog inputs away from fast-switching nodes. Firmware design must also verify clock, reset, boot, and peripheral configurations against the STM32F100RC datasheet because software assumptions about alternate-function assignments can cause hardware-level incompatibilities even when the package is unchanged.

This product page combines the manufacturer and distributor information for the STM32F100RCT6 with package, memory, interface, application, and replacement guidance. It is intended to help engineers establish whether the 24 MHz Cortex-M3 core, 256 KB Flash configuration, 6 KB RAM, and 64-LQFP footprint satisfy the mechanical, firmware, and peripheral requirements of a specific embedded design.

Alternativas drop-in para STM32F100RCT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32F100RCT6 (mesmo formato e footprint) — diferindo em Package.

STMicroelectronics
Package: LQFP64
Comparar com STM32F100RCT6 →

STM32F100RCT6B

✅ Drop-In
📦 64-LQFP (10 mm x 10 mm)
Same STM32F100RC family, 256 KB Flash configuration, and 64-LQFP format; ordering suffix and environmental conditions require verification.

📋 Alternativa de referência (fora do catálogo)

STM32L100RCT6

✅ Drop-In
STMicroelectronics
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M3 · 32 MHz · 256 KB · 16 KB · 1.8 V to 3.6 V · LQFP64 · -40°C to +85°C · 5.1 µA (typical)

✓ Em estoque

$4.2955 / unidade

Ver ficha técnica →

STM32F100RCT6 Classificações máximas e características elétricas

Product Type 32-bit ARM Cortex-M3 microcontroller
Processor Core Arm Cortex-M3
CPU Frequency 24 MHz
Architecture 32-bit RISC
Flash Memory 256 KB
Flash Organization 256K x 8 bits
RAM 6 KB
Program Memory Type Flash
Encapsulamento 64-LQFP, 10 mm x 10 mm
Contagem de pinos 64 pins
Tipo de montagem Surface mount
Product Line STM32F100 value line
Motor-Control Support Yes
CEC Function Yes

Guia de Configuração de Pinos do STM32F100RCT6 64-lqfp, 10 mm x 10 mm

Configuração de pinos para STM32F100RCT6 (pacote 64-lqfp, 10 mm x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 64-lqfp, 10 mm x 10 mm para STM32F100RCT6

Nenhum dado detalhado de pinagem disponível para STM32F100RCT6.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32F100RCT6 é adequado para 6 aplicaçãos: Compact Motor Control Modules, HVAC Fan and Pump Controllers, Consumer Appliance Control Boards, Industrial Sensor and Actuator Hubs, Security and Access Control Modules, Battery-Powered Embedded Instruments.

🏭

Compact Motor Control Modules

The STM32F100RCT6 fits compact motor-control modules because it combines a 24 MHz Arm Cortex-M3 core with 256 KB of Flash, 6 KB of RAM, and 64 external pins in the STM32F100 value-line family. Its timer-based control code can manage commutation, speed references, and protection sequencing while the larger pin count provides access to multiple control and sensing signals. This combination is useful in fan, pump, valve, and actuator products where board area is constrained. Before finalizing the circuit, confirm the required timer channels, complementary outputs, analog inputs, and fault-handling pins against the manufacturer datasheet.

⚡

HVAC Fan and Pump Controllers

STM32F100RCT6 is appropriate for HVAC fan and pump controllers that need real-time timing, flexible I/O, and moderate firmware storage. The 24 MHz Cortex-M3 processor can execute motor and sensor-control tasks, while 256 KB of Flash provides room for communication protocols, diagnostics, and configuration data. Its 6 KB of RAM supports state machines and control buffers, and the 64-LQFP package offers enough pins for external interfaces. Designers should verify the exact timer outputs, encoder or tachometer inputs, and any required functional-safety constraints in the device documentation.

🔧

Consumer Appliance Control Boards

The STM32F100RCT6 can serve as the central controller in a compact consumer appliance, coordinating user inputs, sensors, actuators, and status indicators. Its 32-bit Cortex-M3 architecture handles multitasking between control routines and serial communications, while 256 KB of Flash accommodates application firmware and parameter tables. The 6 KB of RAM is sufficient for moderate working sets, and the 64-LQFP footprint supports a conventional assembly flow. Engineers should confirm the peripheral mix and I/O voltage requirements for the selected appliance architecture before schematic capture.

🧩

Industrial Sensor and Actuator Hubs

STM32F100RCT6 is suited to sensor and actuator hubs that must collect measurements and coordinate outputs within an industrial control module. Its 24 MHz Cortex-M3 core provides deterministic execution for periodic sampling, filtering, threshold management, and communications, while 256 KB of Flash supports structured firmware. The 64-LQFP package offers a broad pin count for digital sensors, communication interfaces, and discrete outputs. Selection should include a review of analog-channel availability, ADC performance, timer resources, and industrial temperature requirements in the manufacturer documentation.

🎥

Security and Access Control Modules

The STM32F100RCT6 can support embedded access-control and security modules that coordinate credential inputs, lock or door actuators, status feedback, and administrative communications. Its 24 MHz Cortex-M3 core is suitable for event processing and protocol handling, and the 256 KB Flash capacity can accommodate firmware, configuration data, and update logic. With 6 KB of RAM and 64 LQFP pins, the device offers practical integration for compact controller boards. Designers must verify the required communication peripherals, timing behavior, security requirements, and lifecycle commitments before using the part in a security-critical role.

📱

Battery-Powered Embedded Instruments

STM32F100RCT6 can be evaluated for battery-powered embedded instruments when moderate processing performance and a broad I/O package are more important than maximum low-power optimization. The 24 MHz Cortex-M3 core supports responsive measurement and control functions, 256 KB of Flash stores application logic, and 6 KB of RAM accommodates working buffers. The 64-LQFP package simplifies access to displays, sensors, communication circuits, and power-control signals. For energy-sensitive products, compare the exact low-power modes, wake-up sources, analog behavior, and regulator requirements in the manufacturer datasheet.

What is the STM32F100RCT6?
The STM32F100RCT6 is a 32-bit STMicroelectronics microcontroller built around the Arm Cortex-M3 core and specified for operation at 24 MHz. It provides 256 KB of Flash memory, 6 KB of RAM, and a 64-LQFP package measuring 10 mm by 10 mm. According to the STMicroelectronics STM32F100RC product page, the device belongs to the STM32F100 value-line family for embedded and motor-control systems.
What are the key specifications of STM32F100RCT6 that engineers should know?
The STM32F100RCT6 combines a 24 MHz Arm Cortex-M3 core, 256 KB of Flash, 6 KB of RAM, and a 64-pin LQFP package. The manufacturer describes the STM32F100xx family as a value-line platform with motor-control and CEC functions. These core figures come from the STMicroelectronics STM32F100RC product page and the exact-part listings for STM32F100RCT6, making them the primary checkpoints before evaluating a board design.
Where can I download the STM32F100RCT6 datasheet PDF?
The STM32F100RCT6 datasheet and product documentation are available through the official STMicroelectronics STM32F100RC product page at https://www.st.com/en/microcontrollers-microprocessors/stm32f100rc.html. Use the manufacturer datasheet for the authoritative pin table, electrical limits, memory map, peripheral descriptions, and package drawings. Third-party document aggregators can provide convenient mirrors, but the STMicroelectronics document should control design and procurement decisions.
Where can I find the STM32F100RCT6 pinout?
The STM32F100RCT6 pinout is defined in the pin-description table and package drawing in the STM32F100RC manufacturer datasheet. The device uses a 64-LQFP package, so the land pattern requires all 64 positions to be checked against the exact variant and alternate-function assignments. Use the manufacturer pin table when assigning PCB nets and do not infer peripheral functions solely from neighboring GPIO positions.
What memory does the STM32F100RCT6 have?
The STM32F100RCT6 contains 256 KB of Flash memory organized as 256K x 8 bits and 6 KB of SRAM. The Flash provides nonvolatile program storage for firmware, while the SRAM supports stack, variables, buffers, and real-time working data. These figures are stated in the exact-part DigiKey and Mouser listings and the STMicroelectronics STM32F100RC product description.
Is the STM32F100RCT6 suitable for motor control applications?
Yes, the STM32F100RCT6 is suitable for compact motor-control applications because STMicroelectronics identifies motor-control functions in the STM32F100 value-line family. Its 24 MHz Cortex-M3 core, 256 KB Flash, 6 KB RAM, and 64-pin package support timing-intensive control code and multiple external connections. The exact timer channels, electrical interfaces, and control-loop performance should be confirmed in the manufacturer datasheet.
What package does the STM32F100RCT6 use?
The STM32F100RCT6 uses a 64-pin LQFP package measuring 10 mm by 10 mm. Exact-part distributor listings identify it as a 64-LQFP surface-mount device, and the manufacturer product page confirms the STM32F100RC family configuration. The package provides a manageable route for automated assembly while offering more external connections than smaller MCU packages.
STM32F100RCT6 vs STM32F100RCT6B - which is better for a new design?
The STM32F100RCT6 and STM32F100RCT6B are closely related STM32F100RC configurations, but the B suffix must be checked against the manufacturer ordering information for temperature and qualification details. Both exact-part listings identify 256 KB of Flash and a 64-LQFP package. For a new industrial design, select the suffix whose documented environmental grade and lifecycle status match the product requirements rather than assuming suffix equivalence.
Can STM32L100RCT6 replace STM32F100RCT6?
The STM32L100RCT6 is a possible cross-reference candidate with an Arm Cortex-M3 core, 256 KB of Flash, and the same 64-LQFP format, but it should not be treated as an automatic drop-in replacement. Clock speed, RAM, peripheral assignments, interrupt behavior, low-power features, and firmware differences must be checked against both datasheets. A hardware footprint match alone does not guarantee application-level equivalence.
When should I choose STM32F100RCT6 instead of another Cortex-M3 MCU?
Choose the STM32F100RCT6 when a design needs an established 24 MHz Cortex-M3 controller with 256 KB of Flash, 6 KB of RAM, motor-control functionality, and a 64-LQFP footprint. It is a practical fit for compact appliance, actuator, fan, pump, and industrial-control modules where moderate firmware size and a conventional high-pin-count package are priorities. Choose a different MCU when the design requires more RAM, faster execution, a different package, or peripherals outside the STM32F100 feature set.
What can replace the STM32F100RCT6 on the same PCB?
The STM32F100RCT6B is the closest same-package candidate identified for a like-for-like engineering review, while the STM32L100RCT6 is a cross-family candidate requiring a full peripheral and firmware audit. A true replacement must preserve the 64-LQFP land pattern, power and clock behavior, pin functions, memory requirements, and programming workflow. Review the manufacturer datasheets and validate timing, communications, and safety behavior before production substitution.
What is the best STMicroelectronics equivalent for STM32F100RCT6?
The STM32F100RCT6B is the closest STMicroelectronics same-package alternative because exact-part comparison listings associate it with the same STM32F100RC device family, 256 KB Flash capacity, and 64-LQFP format. Its suffix may represent different ordering or environmental conditions, so verify the manufacturer ordering table before release. The STM32L100RCT6 is a lower-power family candidate, not a guaranteed functional equivalent.
How do I verify STM32F100RCT6 drop-in replacement compatibility?
Verify replacement compatibility by comparing the 64-pin land pattern, supply pins, ground connections, reset and clock pins, boot configuration, every alternate-function pin, Flash and RAM requirements, peripheral instances, and startup code. Then confirm the replacement's operating voltage, maximum clock, package tolerances, temperature range, and lifecycle status. No drop-in designation should be approved without schematic-level and firmware-level review.
Where can I buy STM32F100RCT6 and check current availability?
Use the Request a Quote form on this page to request STM32F100RCT6 availability, current lead time, order quantities, and packaging details from XAIPART. STMicroelectronics markets the exact device through its online store, while major distributor listings identify it as a cataloged STM32F100RC configuration. The request should quote the exact MPN STM32F100RCT6 so the response reflects the intended 64-LQFP orderable variant.
Is STM32F100RCT6 in stock and what is its lead time?
Stock and lead time for STM32F100RCT6 should be confirmed through the Request a Quote form on this page because inventory changes by order quantity and packaging. The official STMicroelectronics store lists the exact part for direct purchase, and distributor catalogs list the device as an active catalog MCU. Submit the required quantity and target date in the request to obtain a current commitment.

Dados de referência de engenharia para STM32F100RCT6 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STM32F100RCT6 for compact embedded-control products needing a 24 MHz Arm Cortex-M3 core, 256 KB of Flash, 6 KB of RAM, motor-control functionality, and a 64-LQFP footprint. It is well aligned with appliance controllers, small motor drives, actuator modules, and industrial sensor hubs where moderate firmware capacity and a conventional high-pin-count package are important. Consider the STM32F100RCT6B when it offers the exact environmental or ordering conditions required by the design; its same-family configuration makes it the closest candidate for a same-footprint review. Consider the STM32L100RCT6 only when lower-power-family behavior is acceptable and the complete peripheral and firmware differences have been reviewed. None of these choices should be treated as an automatic substitution: confirm supply voltage, clock limits, pin multiplexing, memory requirements, peripheral mapping, package tolerances, temperature range, and programming support before production release.

Comparação com alternativas

Parâmetro Este produto STM32F100RCT6B STM32L100RCT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Flash Memory 256 KB 256 KB 256 KB
Product Family STM32F100 value line STM32F100 value line STM32L100 value line
Motor-Control Focus Yes Yes Lower-power-oriented family; exact feature set requires datasheet review
Architecture 32-bit RISC 32-bit RISC 32-bit RISC
Mounting Type Surface mount Surface mount Surface mount

Principais diferenciais

  • Combines a 24 MHz Cortex-M3 core with 256 KB of Flash and 6 KB of RAM (vs STM32L100RCT6)
  • Uses the STM32F100 value-line motor-control platform (vs STM32L100RCT6)
  • Maintains a conventional 64-LQFP 10 mm x 10 mm footprint (vs STM32F100RCT6B)

Notas de projeto

Use the manufacturer power-supply recommendations and pin descriptions to determine the operating voltage range, regulator topology, and decoupling requirements. Place the required local capacitors close to their associated supply and ground pins, keep return-current paths compact, and account for startup current when the MCU controls an external regulator or load switch. Check absolute maximum and operating limits from the datasheet rather than deriving acceptable supply values from the 24 MHz clock rating.

Design the 64-LQFP footprint from the STM32F100RC package drawing and verify pad dimensions, solder-mask clearance, paste volume, and courtyard against the PCB assembly process. Keep the exposed ground connection strategy consistent with the package data, and route high-current return paths away from sensitive analog and communication nets. Pin multiplexing must be assigned from the exact device pin table because a package-compatible alternative can still assign some peripheral signals differently.

Route clock, reset, and high-speed serial signals with continuous reference planes and avoid unnecessary stubs. If the design uses external memories, communication transceivers, or ADC front ends, inspect source-synchronous timing and input-impedance requirements in the datasheets for every connected device. The 24 MHz Cortex-M3 core is not the only timing constraint; peripheral clocks, bus timing, and external-interface rise-time limits must also be satisfied.

Do not treat matching packages or Cortex-M3 compatibility as proof that a replacement is functionally interchangeable. Compare every alternate-function mapping, power pin, reset and boot configuration, timer channel, communication peripheral, interrupt vector, clock tree, memory requirement, and programming procedure. For STM32L100RCT6 in particular, the lower-power family may change firmware assumptions even when the LQFP footprint and core architecture align.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declaration was present in the product and distributor information. The device is an industrial and commercial microcontroller rather than an AEC-Q100 automotive-qualified variant.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM32F100RCT6 datasheet STM32F100RCT6 pinout STM32F100RCT6 datasheet pdf STM32F100RCT6 specifications STM32F100RCT6 LQFP64 STM32F100RCT6 equivalent STM32F100RCT6 replacement STM32F100RCT6 vs STM32L100RCT6 STM32F100RCT6 motor control STM32F100RCT6 price STM32F100RCT6 stock STMicroelectronics STM32F100RCT6

Componentes & termos relacionados

STMicroelectronics STM32F100RCT6 STM32F100RCT6B STM32L100RCT6 Arm Arm Cortex-M3 microcontroller 32-bit RISC MCU embedded controller STM32F100 value-line family STM32F100RC 24 MHz 256 KB Flash 6 KB SRAM 64-LQFP LQFP package family surface-mount package motor control CEC Reduced Instruction Set Computer real-time control consumer electronics industrial control sensor interface embedded firmware
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ