STM32F100RCT6 - 24MHz Cortex-M3 MCU | STMicroelectronics
MPN: STM32F100RCT6 ✓ 啟用中STM32F100RCT6 概覽
A microcontroller is a semiconductor system that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, analog inputs, and interrupt controllers. The STM32F100 architecture follows the hierarchy microcontroller → 32-bit RISC MCU → Arm Cortex-M3 embedded controller → STM32F100 value-line family. Its 24 MHz Cortex-M3 core provides a practical balance of processing performance, memory capacity, and embedded peripheral integration for compact control systems.
The STM32F100RCT6 provides 256 KB of Flash for firmware and 6 KB of SRAM for working data. Its 32-bit architecture supports efficient handling of control tasks, while the high-density STM32F100RC device family is designed around motor-control and embedded-control applications. The 64-LQFP package provides 64 externally accessible pins, supporting a broad mix of general-purpose I/O and on-board functions while remaining compatible with established surface-mount manufacturing processes.
The Arm Cortex-M3 processor uses a Reduced Instruction Set Computer architecture and provides the core execution environment for interrupt-driven embedded software. At 24 MHz, the STM32F100RCT6 is intended for real-time control workloads where deterministic timer-based operation, serial communications, and mixed analog and digital control are useful. Its combination of 256 KB Flash and 6 KB RAM allows moderate protocol stacks and control logic to coexist without relying on external program-memory devices.
Typical uses include small motor controllers, consumer appliances, HVAC equipment, industrial control modules, sensor interfaces, and compact consumer-electronics products. The motor-control emphasis makes the device relevant to fan, pump, valve, and actuator designs where timers, control outputs, and status sensing must be handled by a compact embedded controller. The same MCU can also supervise sensors and manage communications in cost-sensitive embedded products.
PCB design should preserve clean supply and ground distribution, provide the required decoupling around the device, and route sensitive analog inputs away from fast-switching nodes. Firmware design must also verify clock, reset, boot, and peripheral configurations against the STM32F100RC datasheet because software assumptions about alternate-function assignments can cause hardware-level incompatibilities even when the package is unchanged.
This product page combines the manufacturer and distributor information for the STM32F100RCT6 with package, memory, interface, application, and replacement guidance. It is intended to help engineers establish whether the 24 MHz Cortex-M3 core, 256 KB Flash configuration, 6 KB RAM, and 64-LQFP footprint satisfy the mechanical, firmware, and peripheral requirements of a specific embedded design.
直接替換替代品,適用於 STM32F100RCT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32F100RCT6 (相同外形與佔位) — 差異在於 Package.
STM32F100RCT6B
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L100RCT6
✅ 直接替換✓ 有庫存
$4.2955 / 單位
查看資料表 →STM32F100RCT6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | Arm Cortex-M3 |
| CPU Frequency | 24 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| RAM | 6 KB |
| Program Memory Type | Flash |
| 封裝 | 64-LQFP, 10 mm x 10 mm |
| 腳位數 | 64 pins |
| 安裝類型 | Surface mount |
| Product Line | STM32F100 value line |
| Motor-Control Support | Yes |
| CEC Function | Yes |
STM32F100RCT6 64-lqfp, 10 mm x 10 mm 腳位配置指南
STM32F100RCT6(64-lqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F100RCT6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F100RCT6 適用於 6 應用s: Compact Motor Control Modules, HVAC Fan and Pump Controllers, Consumer Appliance Control Boards, Industrial Sensor and Actuator Hubs, Security and Access Control Modules, Battery-Powered Embedded Instruments.
Compact Motor Control Modules
The STM32F100RCT6 fits compact motor-control modules because it combines a 24 MHz Arm Cortex-M3 core with 256 KB of Flash, 6 KB of RAM, and 64 external pins in the STM32F100 value-line family. Its timer-based control code can manage commutation, speed references, and protection sequencing while the larger pin count provides access to multiple control and sensing signals. This combination is useful in fan, pump, valve, and actuator products where board area is constrained. Before finalizing the circuit, confirm the required timer channels, complementary outputs, analog inputs, and fault-handling pins against the manufacturer datasheet.
推薦
HVAC Fan and Pump Controllers
STM32F100RCT6 is appropriate for HVAC fan and pump controllers that need real-time timing, flexible I/O, and moderate firmware storage. The 24 MHz Cortex-M3 processor can execute motor and sensor-control tasks, while 256 KB of Flash provides room for communication protocols, diagnostics, and configuration data. Its 6 KB of RAM supports state machines and control buffers, and the 64-LQFP package offers enough pins for external interfaces. Designers should verify the exact timer outputs, encoder or tachometer inputs, and any required functional-safety constraints in the device documentation.
推薦
Consumer Appliance Control Boards
The STM32F100RCT6 can serve as the central controller in a compact consumer appliance, coordinating user inputs, sensors, actuators, and status indicators. Its 32-bit Cortex-M3 architecture handles multitasking between control routines and serial communications, while 256 KB of Flash accommodates application firmware and parameter tables. The 6 KB of RAM is sufficient for moderate working sets, and the 64-LQFP footprint supports a conventional assembly flow. Engineers should confirm the peripheral mix and I/O voltage requirements for the selected appliance architecture before schematic capture.
推薦
Industrial Sensor and Actuator Hubs
STM32F100RCT6 is suited to sensor and actuator hubs that must collect measurements and coordinate outputs within an industrial control module. Its 24 MHz Cortex-M3 core provides deterministic execution for periodic sampling, filtering, threshold management, and communications, while 256 KB of Flash supports structured firmware. The 64-LQFP package offers a broad pin count for digital sensors, communication interfaces, and discrete outputs. Selection should include a review of analog-channel availability, ADC performance, timer resources, and industrial temperature requirements in the manufacturer documentation.
推薦
Security and Access Control Modules
The STM32F100RCT6 can support embedded access-control and security modules that coordinate credential inputs, lock or door actuators, status feedback, and administrative communications. Its 24 MHz Cortex-M3 core is suitable for event processing and protocol handling, and the 256 KB Flash capacity can accommodate firmware, configuration data, and update logic. With 6 KB of RAM and 64 LQFP pins, the device offers practical integration for compact controller boards. Designers must verify the required communication peripherals, timing behavior, security requirements, and lifecycle commitments before using the part in a security-critical role.
推薦
Battery-Powered Embedded Instruments
STM32F100RCT6 can be evaluated for battery-powered embedded instruments when moderate processing performance and a broad I/O package are more important than maximum low-power optimization. The 24 MHz Cortex-M3 core supports responsive measurement and control functions, 256 KB of Flash stores application logic, and 6 KB of RAM accommodates working buffers. The 64-LQFP package simplifies access to displays, sensors, communication circuits, and power-control signals. For energy-sensitive products, compare the exact low-power modes, wake-up sources, analog behavior, and regulator requirements in the manufacturer datasheet.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F100RCT6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F100RCT6B | STM32L100RCT6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP |
| Processor Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Flash Memory | 256 KB | 256 KB | 256 KB |
| Product Family | STM32F100 value line | STM32F100 value line | STM32L100 value line |
| Motor-Control Focus | Yes | Yes | Lower-power-oriented family; exact feature set requires datasheet review |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Mounting Type | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Combines a 24 MHz Cortex-M3 core with 256 KB of Flash and 6 KB of RAM (對比STM32L100RCT6)
- Uses the STM32F100 value-line motor-control platform (對比STM32L100RCT6)
- Maintains a conventional 64-LQFP 10 mm x 10 mm footprint (對比STM32F100RCT6B)
設計說明
Use the manufacturer power-supply recommendations and pin descriptions to determine the operating voltage range, regulator topology, and decoupling requirements. Place the required local capacitors close to their associated supply and ground pins, keep return-current paths compact, and account for startup current when the MCU controls an external regulator or load switch. Check absolute maximum and operating limits from the datasheet rather than deriving acceptable supply values from the 24 MHz clock rating.
Design the 64-LQFP footprint from the STM32F100RC package drawing and verify pad dimensions, solder-mask clearance, paste volume, and courtyard against the PCB assembly process. Keep the exposed ground connection strategy consistent with the package data, and route high-current return paths away from sensitive analog and communication nets. Pin multiplexing must be assigned from the exact device pin table because a package-compatible alternative can still assign some peripheral signals differently.
Route clock, reset, and high-speed serial signals with continuous reference planes and avoid unnecessary stubs. If the design uses external memories, communication transceivers, or ADC front ends, inspect source-synchronous timing and input-impedance requirements in the datasheets for every connected device. The 24 MHz Cortex-M3 core is not the only timing constraint; peripheral clocks, bus timing, and external-interface rise-time limits must also be satisfied.
Do not treat matching packages or Cortex-M3 compatibility as proof that a replacement is functionally interchangeable. Compare every alternate-function mapping, power pin, reset and boot configuration, timer channel, communication peripheral, interrupt vector, clock tree, memory requirement, and programming procedure. For STM32L100RCT6 in particular, the lower-power family may change firmware assumptions even when the LQFP footprint and core architecture align.
合規資訊
No explicit compliance declaration was present in the product and distributor information. The device is an industrial and commercial microcontroller rather than an AEC-Q100 automotive-qualified variant.