STM32F413RHT6 - 1.5MB Flash ARM Cortex-M4F MCU | STMicroelectronics
N.º da peça: STM32F413RHT6 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.4101 | $8,41 |
STM32F413RHT6 Visão geral
What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems, combining the efficient ARM Cortex-M4 core with a hardware floating-point unit (FPU) that accelerates single-precision floating-point arithmetic. This makes it ideal for digital signal processing (DSP) and control applications. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, serving as the 'brain' of embedded systems. The STM32F413 series sits in the mid-to-high performance range of ST's STM32 portfolio, offering a balance of performance, memory, and peripheral integration.
Key features include a rich set of communication interfaces: 6x SPI, 3x I2C, 4x USART, 2x UART, 2x CAN, 1x SDMMC, 1x USB OTG FS, and 1x SAI. It also integrates a 12-bit ADC with up to 16 channels, a 12-bit DAC with 2 channels, advanced timers, and a true random number generator (TRNG). The device supports a wide range of power-saving modes, including Sleep, Stop, and Standby, with typical power consumption as low as 1.8 uA in Standby mode. The operating temperature range is -40C to +85C, making it suitable for industrial environments.
Technically, the STM32F413RHT6 is built on a 90nm process technology, offering a good balance of performance and power efficiency. The Cortex-M4F core with FPU and DSP instructions enables efficient execution of complex algorithms, such as FFTs and control loops. The memory architecture includes a 1.5MB Flash with read-while-write support and 320KB SRAM, allowing for large data buffers and multitasking. The device also features a memory protection unit (MPU) for enhanced security and reliability.
Typical applications include industrial control systems, motor control, medical devices, consumer electronics, and IoT gateways. The rich peripheral set and high memory capacity make it suitable for applications requiring connectivity, such as smart home hubs and industrial automation. The USB OTG FS interface enables direct connection to PCs or mobile devices for data transfer and firmware updates.
When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1uF capacitor. For reliable operation, the NRST pin should have a 100nF capacitor to ground. The device supports SWD and JTAG debugging, with SWD recommended for production to save pins.
Alternativas drop-in para STM32F413RHT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32F413RHT6 (mesmo formato e footprint) — diferindo em Flash Memory, SRAM, Timers, Package, ADC Resolution.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32F413RGT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.47 / unidade
Ver ficha técnica →STM32F423RHT6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32F413RHT6TR
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32F411RET6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.02 / unidade
Ver ficha técnica →STM32F446RET6
⚡ Mesmo encapsulamento ⚠️ Especificações não verificadas✓ Em estoque
$8.94 / unidade
Ver ficha técnica →LPC4327FBD208
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
R5F565NEDFP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32F413RHT6 Classificações máximas e características elétricas
| Core | ARM Cortex-M4F with FPU |
| Frequência máxima de clock | 100 MHz |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB |
| Supply Voltage Range | 1.7 V to 3.6 V |
| Encapsulamento | LQFP-64 (10x10 mm) |
| Faixa de temperatura de operação | -40C to +85C |
| Number of I/O Pins | 50 |
| ADC Resolution | 12-bit |
| Number of ADC Channels | 16 |
| DAC Resolution | 12-bit |
| Number of DAC Channels | 2 |
| Communication Interfaces | 6x SPI, 3x I2C, 4x USART, 2x UART, 2x CAN, 1x SDMMC, 1x USB OTG FS, 1x SAI |
| Timers | Advanced-control, general-purpose, basic, and low-power timers |
| DMA Channels | 16 |
| Standby Current | 1.8 uA |
| Status RoHS | Compliant |
Configuração de pinos do STM32F413RHT6
| Pino 1 | VBAT — Backup battery supply |
| Pino 2 | PC13 — GPIO or RTC tamper |
| Pino 3 | PC14 — GPIO or OSC32_IN |
| Pino 4 | PC15 — GPIO or OSC32_OUT |
| Pino 5 | PF0 — GPIO |
| Pino 6 | PF1 — GPIO |
| Pino 7 | NRST — Reset (active low) |
| Pino 8 | VSSA — Analog ground |
| Pino 9 | VDDA — Analog power supply |
| Pino 10 | PA0 — GPIO/ADC |
| Pino 11 | PA1 — GPIO/ADC |
| Pino 12 | PA2 — GPIO/USART2_TX |
| Pino 13 | PA3 — GPIO/USART2_RX |
| Pino 14 | PA4 — GPIO/SPI1_NSS |
| Pino 15 | PA5 — GPIO/SPI1_SCK |
| Pino 16 | PA6 — GPIO/SPI1_MISO |
| Pino 17 | PA7 — GPIO/SPI1_MOSI |
| Pino 18 | PC4 — GPIO/ADC |
| Pino 19 | PC5 — GPIO/ADC |
| Pino 20 | PB0 — GPIO/ADC |
| Pino 21 | PB1 — GPIO/ADC |
| Pino 22 | PB2 — GPIO |
| Pino 23 | PF7 — GPIO |
| Pino 24 | PF8 — GPIO |
| Pino 25 | PF9 — GPIO |
| Pino 26 | PF10 — GPIO |
| Pino 27 | VSS — Ground |
| Pino 28 | VDD — Power supply |
| Pino 29 | PB10 — GPIO/I2C2_SCL |
| Pino 30 | PB11 — GPIO/I2C2_SDA |
| Pino 31 | PB12 — GPIO/SPI2_NSS |
| Pino 32 | PB13 — GPIO/SPI2_SCK |
| Pino 33 | PB14 — GPIO/SPI2_MISO |
| Pino 34 | PB15 — GPIO/SPI2_MOSI |
| Pino 35 | PC6 — GPIO/TIM3_CH1 |
| Pino 36 | PC7 — GPIO/TIM3_CH2 |
| Pino 37 | PC8 — GPIO/TIM3_CH3 |
| Pino 38 | PC9 — GPIO/TIM3_CH4 |
| Pino 39 | PA8 — GPIO/USB_OTG_FS_SOF |
| Pino 40 | PA9 — GPIO/USB_OTG_FS_VBUS |
| Pino 41 | PA10 — GPIO/USB_OTG_FS_ID |
| Pino 42 | PA11 — GPIO/USB_OTG_FS_DM |
| Pino 43 | PA12 — GPIO/USB_OTG_FS_DP |
| Pino 44 | PA13 — SWDIO |
| Pino 45 | PA14 — SWCLK |
| Pino 46 | PA15 — GPIO/JTDI |
| Pino 47 | PC10 — GPIO |
| Pino 48 | PC11 — GPIO |
| Pino 49 | PC12 — GPIO |
| Pino 50 | PD2 — GPIO |
| Pino 51 | PB3 — GPIO/JTDO |
| Pino 52 | PB4 — GPIO/NJTRST |
| Pino 53 | PB5 — GPIO |
| Pino 54 | PB6 — GPIO/I2C1_SCL |
| Pino 55 | PB7 — GPIO/I2C1_SDA |
| Pino 56 | BOOT0 — Boot mode selection |
| Pino 57 | PB8 — GPIO/CAN1_RX |
| Pino 58 | PB9 — GPIO/CAN1_TX |
| Pino 59 | VSS — Ground |
| Pino 60 | VDD — Power supply |
| Pino 61 | PC0 — GPIO/ADC |
| Pino 62 | PC1 — GPIO/ADC |
| Pino 63 | PC2 — GPIO/ADC |
| Pino 64 | PC3 — GPIO/ADC |
Aplicações típicas
STM32F413RHT6 é adequado para 6 aplicaçãos: Industrial Control Systems, Motor Control, Medical Devices, Consumer Electronics, IoT Gateways, Audio Processing.
Industrial Control Systems
The STM32F413RHT6 is ideal for industrial control systems due to its 100 MHz Cortex-M4F core, advanced timers, and multiple communication interfaces. It can handle real-time control loops, PLCs, and motor control with high precision. The device's 12-bit ADC with 16 channels enables accurate sensor reading, while the CAN interface supports robust industrial networking. Its wide operating temperature range (-40C to +85C) ensures reliability in harsh factory environments. The large Flash and SRAM allow for complex control algorithms and data logging. In a typical PLC, the MCU reads inputs, executes logic, and drives outputs with minimal latency. The FPU accelerates floating-point calculations for PID controllers, improving response time. The low-power modes help reduce energy consumption in always-on systems. Overall, the STM32F413RHT6 provides the performance and connectivity needed for modern industrial automation.
Recomendado
Motor Control
The STM32F413RHT6 excels in motor control applications, such as brushless DC (BLDC) and permanent magnet synchronous motors (PMSM). Its advanced timers generate high-resolution PWM signals, while the 12-bit ADC samples phase currents and rotor position with high accuracy. The Cortex-M4F FPU accelerates field-oriented control (FOC) algorithms, enabling smooth and efficient motor operation. The device supports sensorless control using back-EMF detection, reducing system cost. With multiple communication interfaces, it can interface with encoders, drivers, and host controllers. The large SRAM allows for complex control loops and data buffering. In a typical motor drive, the MCU reads current sensors, computes the FOC algorithm, and updates PWM duty cycles in real-time. The low-latency interrupt handling ensures precise timing. The STM32F413RHT6's robust design and industrial temperature range make it suitable for pumps, fans, and robotics.
Recomendado
Medical Devices
The STM32F413RHT6 is well-suited for medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high processing power enables real-time signal processing for ECG, EEG, and blood pressure monitoring. The 12-bit ADC with 16 channels can acquire multiple physiological signals simultaneously. The device's low-power modes extend battery life in portable devices. The USB OTG FS interface allows data transfer to PCs for analysis and firmware updates. The large Flash memory stores patient data and firmware. The FPU accelerates digital filtering and feature extraction algorithms. In a patient monitor, the MCU samples ECG signals, filters noise, and displays waveforms on an LCD. The CAN interface can connect to hospital networks for centralized monitoring. The STM32F413RHT6's reliability and long-term availability make it a trusted choice for medical applications.
Recomendado
Consumer Electronics
The STM32F413RHT6 is used in consumer electronics like smart home hubs, wearable devices, and audio equipment. Its rich peripheral set includes USB OTG FS for connectivity, SAI for audio interfaces, and multiple I2C/SPI for sensors and displays. The 100 MHz core handles user interfaces and communication protocols efficiently. The low-power modes are crucial for battery-powered wearables. The large Flash memory supports complex applications and over-the-air updates. In a smart home hub, the MCU manages Zigbee, Wi-Fi, and Bluetooth modules via UART/SPI, processes sensor data, and controls actuators. The FPU accelerates audio processing for voice commands. The STM32F413RHT6's small LQFP-64 package fits compact designs. Its wide operating temperature range ensures reliable operation in various environments.
Recomendado
IoT Gateways
The STM32F413RHT6 is an excellent choice for IoT gateways that aggregate data from multiple sensors and devices. Its multiple communication interfaces (UART, SPI, I2C, CAN, USB) allow connection to various wireless modules (Wi-Fi, Zigbee, LoRa) and wired sensors. The 1.5 MB Flash and 320 KB SRAM provide ample space for protocol stacks and data buffering. The Cortex-M4F core with FPU handles encryption and data processing efficiently. The device supports secure boot and firmware updates via USB or UART. In a typical IoT gateway, the MCU collects data from sensors, processes it, and forwards it to the cloud via Ethernet or Wi-Fi. The low-power modes enable battery-powered gateways. The STM32F413RHT6's robust design and long-term availability make it suitable for industrial IoT deployments.
Recomendado
Audio Processing
The STM32F413RHT6 is used in audio processing applications such as audio interfaces, voice recognition, and sound synthesis. Its SAI (Serial Audio Interface) supports I2S and TDM formats, enabling connection to audio codecs and DACs. The Cortex-M4F FPU accelerates audio DSP algorithms like filtering, equalization, and FFT. The large SRAM allows for audio buffering and effects processing. The USB OTG FS can stream audio to and from a host. In a typical audio interface, the MCU receives digital audio via SAI, processes it (e.g., noise reduction), and outputs via USB or SAI. The 12-bit ADC can sample analog audio for voice recognition. The STM32F413RHT6's high performance and low latency make it suitable for real-time audio applications. Its low-power modes are beneficial for portable audio devices.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32F413RHT6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32F413RGT6 | STM32F423RHT6 | STM32F411RET6 | LPC4327FBD208 |
|---|---|---|---|---|---|
| Package | LQFP-64 | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same | LQFP-64 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors |
| Core | ARM Cortex-M4F @ 100 MHz | ARM Cortex-M4F @ 100 MHz | ARM Cortex-M4F @ 100 MHz | ARM Cortex-M4F @ 100 MHz | ARM Cortex-M4F @ 204 MHz |
| Flash Memory | 1.5 MB | 1 MB | 1.5 MB | 512 KB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 128 KB | 136 KB |
| Communication Interfaces | 6x SPI, 3x I2C, 4x USART, 2x UART, 2x CAN, 1x SDMMC, 1x USB OTG FS, 1x SAI | Same as this product | Same as this product | 5x SPI, 3x I2C, 3x USART, 1x SDMMC, 1x USB OTG FS | 4x SPI, 3x I2C, 4x UART, 2x CAN, 1x USB OTG HS |
| ADC Channels | 16 | 16 | 16 | 16 | 8 |
| DAC Channels | 2 | 2 | 2 | 0 | 1 |
| Operating Temperature Range | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principais diferenciais
- Largest Flash memory in the STM32F4 LQFP-64 family (vs STM32F411RET6)
- Includes SAI and CAN interfaces (vs STM32F411RET6)
- Higher SRAM capacity (vs LPC4327FBD208)
Notas de projeto
Decouple each VDD pin with a 100nF ceramic capacitor placed as close as possible to the pin. Additionally, use a 4.7uF capacitor on the main power rail. The VDDA pin should be connected to a clean analog supply, and VREF+ should be decoupled with a 1uF capacitor. For battery-powered designs, the VBAT pin can be connected to a backup battery to maintain RTC and backup registers when main power is off.
For the LQFP-64 package, ensure proper solder paste stencil design to avoid bridging. Use a 0.5mm pitch land pattern. Place the crystal oscillator (if used) close to the OSC_IN/OSC_OUT pins with proper grounding. For USB OTG, route the DM/DP lines as a differential pair with 90-ohm impedance. Keep the SWD interface pins accessible for programming and debugging.
Do not leave the BOOT0 pin floating; connect it to ground through a 10k resistor for normal boot from Flash. Ensure the NRST pin has a 100nF capacitor to ground to prevent noise-induced resets. When using the ADC, avoid digital switching noise on the VDDA supply; use an LC filter if necessary. Also, verify that the maximum junction temperature is not exceeded; for high clock speeds and heavy loads, consider thermal relief.
Informações de conformidade
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32F413RHT6Q or similar.
