STMicroelectronics

STM32L071RBT7 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics

N.º da peça: STM32L071RBT7 ✓ Ativo
64-LQFP Package 32 MHz Speed 128 KB Memory
MOQ: 1 |

STM32L071RBT7 Visão geral

The STMicroelectronics STM32L071RBT7 is an ultra-low-power 32-bit microcontroller with a 32 MHz Arm Cortex-M0+ core, 128 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It belongs to STMicroelectronics' STM32L0 access-line family, combining low-power embedded control with 128 KB of programmable Flash and an Arm Cortex-M0+ instruction set architecture.

An ultra-low-power microcontroller is an embedded processing platform optimized to operate efficiently across active, sleep, low-power-run, and stop operating modes. Within the product hierarchy, the STM32L071RBT7 is an MCU, a semiconductor containing a CPU, memory, peripherals, and communication interfaces. It is intended for compact systems that require deterministic real-time control without the memory and processing demand of a higher-performance microcontroller.

Key features include a 32-bit Arm Cortex-M0+ processor, a maximum stated CPU frequency of 32 MHz, 128 KB of Flash organized as 128K x 8, and a 64-LQFP package measuring 10 x 10 mm. These characteristics make the device suitable for industrial sensing, connected equipment, portable instruments, and compact control modules. The external footprint also supports board designs that require more I/O than smaller 32-pin and 48-pin MCU packages can provide.

The STM32L071RBT7 uses the Arm Cortex-M0+ RISC architecture, which provides a compact software ecosystem through Arm-compatible instruction sets, development tools, and peripheral patterns. Its 128 KB of on-chip Flash removes the need for an external program-memory device in moderate firmware applications, while the 64-LQFP package exposes a comparatively generous pin count for sensors, communications, control outputs, and debug access.

Typical applications include low-power sensor nodes, industrial monitoring equipment, compact motor and actuator controllers, battery-operated measuring instruments, connected accessories, and embedded control subsystems. The device can also serve as the central controller in communications equipment where 128 KB of Flash and a 32 MHz clock provide a practical balance of capability, footprint, and low-power operation.

PCB design should preserve clean decoupling around each supply pin, route high-current and sensitive signals away from switching nodes, and follow the manufacturer's pin and layout guidance. Firmware should use the appropriate STM32CubeMX device configuration, the correct clock tree, and validated low-power modes. Brownout, reset, and watchdog behavior should also be reviewed before deployment in unattended systems.

This product record combines the manufacturer device identification, package and memory details, replacement considerations, and implementation guidance in a format that helps engineers evaluate the STM32L071RBT7 before schematic capture, PCB layout, firmware planning, and sourcing.

Alternativas drop-in para STM32L071RBT7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32L071RBT7 (mesmo formato e footprint) — diferindo em Package, Product Type, RoHS Status.

STMicroelectronics
Package: 64-LQFP (10 x 10 mm)
Product Type: 32-bit ultra-low-power microcontroller
RoHS Status: Compliant
Comparar com STM32L071RBT7 →

STM32L071RBT6

✅ Drop-In ⚠️ Especificações não verificadas
STMicroelectronics
📦 64-LQFP
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32-bit Arm RISC · 32 MHz · 128 KB (128K x 8 bits) · 20 KB · STM32L0 access line · 64-LQFP (10 x 10 mm)

Consulte o preço

Ver ficha técnica →

STM32L081RBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 64-LQFP
Same 64-LQFP footprint and 128 KB Flash class; temperature rating is 20°C lower at 85°C and the STM32L081 family adds device features.

📋 Alternativa de referência (fora do catálogo)

STM32L081RBT7

✅ Drop-In ⚠️ Especificações não verificadas
📦 64-LQFP
Matches the 64-LQFP package, 32 MHz operating class, 128 KB Flash size, and 105°C temperature suffix; STM32L081 adds family-specific features.

📋 Alternativa de referência (fora do catálogo)

STM32L061RBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 64-LQFP
Same 64-LQFP footprint and 32 MHz Cortex-M0+ class; Flash memory decreases from 128 KB to 64 KB, a 50% reduction.

📋 Alternativa de referência (fora do catálogo)

STM32L051RBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 64-LQFP
Same 64-LQFP footprint and 32 MHz Cortex-M0+ class; Flash memory decreases from 128 KB to 64 KB, a 50% reduction.

📋 Alternativa de referência (fora do catálogo)

STM32L031RBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 64-LQFP
Same 64-LQFP footprint and 32 MHz Cortex-M0+ class; Flash memory decreases from 128 KB to 32 KB, a 75% reduction.

📋 Alternativa de referência (fora do catálogo)

STM32L071RBT7 Classificações máximas e características elétricas

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 128 KB
Flash Organization 128K x 8
Program Memory Type Flash
Encapsulamento 64-LQFP
Package Dimensions 10 x 10 mm
Contagem de pinos 64 pins
Tipo de montagem Surface mount
Status RoHS RoHS3 compliant
Status do ciclo de vida Active
Manufacturer STMicroelectronics

Guia de Configuração de Pinos do STM32L071RBT7 10 x 10 mm

Configuração de pinos para STM32L071RBT7 (pacote 10 x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 10 x 10 mm para STM32L071RBT7

Nenhum dado detalhado de pinagem disponível para STM32L071RBT7.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32L071RBT7 é adequado para 6 aplicaçãos: Industrial Sensor and Monitoring Nodes, Battery-Operated Portable Instruments, Connected Sensor and IoT Equipment, Compact Motor and Actuator Control, Communications and Protocol Bridges, Low-Power Data Acquisition Equipment.

🏭

Industrial Sensor and Monitoring Nodes

The STM32L071RBT7 fits industrial monitoring nodes because its 32 MHz Arm Cortex-M0+ core can process sensor readings, apply local filtering, and manage alarms while the STM32L0 family emphasizes low-power operation. Its 128 KB of Flash accommodates firmware, calibration tables, and communication routines without requiring external program memory. The 64-LQFP package provides more I/O than smaller MCU packages, while the T7 temperature class supports operation up to 105°C. Confirm the exact supply limits and peripheral assignments against the manufacturer datasheet before releasing the board.

📱

Battery-Operated Portable Instruments

The STM32L071RBT7 is suitable for battery-operated instruments because the ultra-low-power STM32L0 platform can reduce energy use between user interactions or measurement events. Its 32 MHz Cortex-M0+ core has ample performance for display control, data logging, and sensor conditioning, while 128 KB of Flash supports compact application firmware. The LQFP package is easy to inspect and rework for prototypes. Power-budget the MCU, external sensors, regulator, and indicator separately; actual run time depends on which low-power mode and wake-up sources the finished instrument uses.

🧩

Connected Sensor and IoT Equipment

The STM32L071RBT7 can serve as the local controller in connected sensor equipment, combining a 32 MHz Cortex-M0+ core with 128 KB of Flash for protocol handling and device logic. A moderate pin count allows the design to connect sensors, status indicators, communications, and local actuators without moving to a larger package. The MCU's low-power orientation also suits intermittently connected devices. Select communication components based on voltage, current, and timing requirements, and confirm that the chosen radio or transceiver does not dominate the system's energy budget.

🔧

Compact Motor and Actuator Control

The STM32L071RBT7 is well suited to compact actuator-control boards because its 32-bit Cortex-M0+ processor can execute deterministic control and supervisory logic, and its 64-LQFP package offers a broad pin complement for encoders, sensors, and control outputs. The 128 KB Flash capacity supports state-machine and position-control firmware. Use timer outputs and external drivers for power switching rather than driving loads directly through MCU pins. Current limits, isolation, flyback protection, and thermal margins must be designed around the motor and driver, not inferred from the MCU rating.

🌐

Communications and Protocol Bridges

The STM32L071RBT7 can be used in protocol-conversion and communications-support equipment where a small microcontroller must supervise a data path and manage configuration. Its 32 MHz Cortex-M0+ core is suitable for event handling and byte- or frame-level protocol logic, while 128 KB of Flash provides room for stacks and state tables. The LQFP package simplifies access to UART, SPI, and other communication signals. Validate protocol timing, buffer depth, clock tolerance, and peripheral availability in the selected STM32L071RB device configuration before relying on it for high-throughput traffic.

📺

Low-Power Data Acquisition Equipment

The STM32L071RBT7 fits compact data-acquisition equipment that needs local control, storage, and sensor aggregation under constrained energy budgets. The 128 KB Flash can hold acquisition firmware and parameter sets, and the 32 MHz Cortex-M0+ core can service data-transfer routines while keeping the surrounding circuit simple. Use the 64-LQFP footprint for a direct, inspectable implementation and route analog inputs according to the selected converter's grounding guidance. Validate input bandwidth, acquisition latency, clock stability, and buffer handling in the finished firmware configuration.

What are the key specifications of STM32L071RBT7 that engineers should know?
The STM32L071RBT7 is an ultra-low-power microcontroller built around a 32-bit Arm Cortex-M0+ core operating at 32 MHz. According to the STMicroelectronics STM32L071RB product page and device listing, it provides 128 KB of Flash, a 64-LQFP package, and a 10 x 10 mm body size. Its access-line positioning makes it appropriate for embedded products that require low-power operation, a compact industrial footprint, and a moderate amount of on-chip program memory.
What is the operating voltage of STM32L071RBT7?
The STM32L071RBT7 requires a supply range that must be confirmed against the manufacturer datasheet before design release. The manufacturer identifies the device as an STM32L071RB ultra-low-power Cortex-M0+ microcontroller, but the listing excerpt does not state its minimum and maximum operating voltages. Use the device electrical-characteristics table to select the regulator, decoupling network, and input-voltage limits for the exact board configuration.
Where can I download the STM32L071RBT7 datasheet and pinout?
The official STM32L071RB device page is the appropriate starting point for the STM32L071RBT7 datasheet, pin descriptions, package drawings, and electrical characteristics. The device page identifies the STM32L071RB family and its 32 MHz Arm Cortex-M0+ architecture. For implementation, use the pin-definition table and the 64-LQFP footprint drawing from the manufacturer documentation rather than relying on a generic package diagram.
Is STM32L071RBT7 suitable for low-power sensor applications?
The STM32L071RBT7 is suitable for low-power sensor applications because STMicroelectronics positions the STM32L071xx series as an ultra-low-power access-line MCU family. Its 32 MHz Cortex-M0+ core and 128 KB of Flash allow local filtering, control, and protocol handling without an external program-memory device. Actual battery life depends on the selected sleep or stop mode, wake-up peripherals, sensor duty cycle, and regulator efficiency.
What is the difference between STM32L071RBT7 and STM32L071RBT6?
The STM32L071RBT7 and STM32L071RBT6 belong to the same STM32L071RB family and use the same 64-LQFP, 10 x 10 mm package format. The principal ordering distinction is the temperature-range suffix, with T7 representing the -40°C to +105°C class and T6 representing the -40°C to +85°C class. Both retain a 32 MHz Cortex-M0+ core and 128 KB of Flash, so the temperature rating should drive the final choice.
STM32L071RBT7 vs STM32F071RBT6 - which MCU is better for a new design?
The STM32L071RBT7 is generally the better choice when low-power operation is the primary design goal. The STM32F071RBT6 belongs to the STM32F0 family and is positioned around general-purpose performance rather than the ultra-low-power STM32L0 access line. Both provide a 32-bit Arm core and 64-LQFP packaging in the cited comparison, but their peripheral sets, power-management details, and firmware configuration must be checked against the required application.
When should I choose STM32L071RBT7 over STM32L081RBT6?
Choose STM32L071RBT7 when the design requires the STM32L071RB access-line configuration and extended -40°C to +105°C temperature capability. Choose STM32L081RBT6 only after confirming that its additional device features are required and that its pin-level operation is acceptable in the finished design. The two parts share the 64-LQFP footprint and 128 KB Flash configuration, making firmware and hardware transitions comparatively straightforward.
Is STM32L071RBT7 suitable for industrial equipment?
The STM32L071RBT7 is suitable for many industrial applications because its T7 ordering code supports the -40°C to +105°C temperature class and its 64-LQFP package provides a broad pin count. Its 32 MHz Cortex-M0+ core and 128 KB of Flash are sufficient for sensing, supervisory control, communications, and local automation functions. Confirm electromagnetic compatibility, isolation, and industrial qualification requirements separately for the complete product.
What is the best drop-in replacement for STM32L071RBT7?
The closest same-footprint replacement is STM32L071RBT6, which retains the 32 MHz Cortex-M0+ core, 128 KB of Flash, and 64-LQFP format while reducing the temperature rating from 105°C to 85°C. STM32L081RBT6 and STM32L081RBT7 can also share the package footprint, but their added device features should be reviewed before substitution. No verified cross-manufacturer drop-in replacement was identified.
Can STM32L081RBT6 replace STM32L071RBT7?
STM32L081RBT6 can serve as a footprint-compatible migration option, but it should not be treated as an unconditional substitute. It belongs to the STM32L081RB family with the same 64-LQFP format and 128 KB Flash class, while adding device features that distinguish it from STM32L071RB. Review peripheral availability, startup behavior, firmware support, and the lower 85°C temperature limit before approving the change.
What can replace STM32L071RBT7?
STM32L071RBT6, STM32L081RBT6, and STM32L081RBT7 are the principal same-package options for replacing STM32L071RBT7. Each uses a 64-LQFP footprint, but the temperature range, memory configuration, peripherals, and device-specific behavior can differ. STM32L071RBT6 is the most direct option when only the extended temperature rating is unnecessary; migration still requires firmware and board-level verification.
Is STM32L071RBT7 the same as STM32L081RBT7?
No. The STM32L071RBT7 and STM32L081RBT7 share a 64-LQFP footprint and the same broad STM32L0 architecture class, but they belong to different device families. STM32L081RB adds features not present in STM32L071RB, so the devices are not functionally identical even though their footprints support a controlled migration. Review the manufacturer feature comparison and regenerate project configuration for the selected device.
What is the best STMicroelectronics equivalent for STM32L071RBT7?
STMicroelectronics STM32L071RBT6 is the closest equivalent when an exact drop-in footprint and the same 128 KB Flash class are required and the application remains within -40°C to +85°C. STM32L081RBT6 and STM32L081RBT7 provide the same broad package format with additional family features. No equivalent from another manufacturer was established with enough pin-level and parametric evidence to recommend it as a drop-in replacement.
Where to buy STM32L071RBT7 online?
Use the Request a Quote form on this page to request current STM32L071RBT7 availability, order quantity, and delivery information for the exact 64-LQFP ordering code. The manufacturer, authorized distribution, and catalog listings identify STM32L071RBT7 as an active 128 KB Flash microcontroller. XAIPART can confirm the quotation details associated with your requested quantity rather than publishing a static price that may become stale.
What is the price and lead time for STM32L071RBT7?
Request the current STM32L071RBT7 price, lead time, and minimum order quantity through the Request a Quote form on this page. The component is listed as active and is offered in a 64-LQFP package, but current commercial terms can change with inventory, order volume, and packaging requirements. State the required quantity, tray or reel preference, and target delivery location when submitting the request.

Dados de referência de engenharia para STM32L071RBT7 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose STM32L071RBT7 when the product needs an ultra-low-power 32 MHz Cortex-M0+ MCU, 128 KB of Flash, a 64-LQFP footprint, and operation across the T7 temperature class. STM32L071RBT6 is the closest migration option when the application stays below 85°C and the additional extended-temperature capability is unnecessary. STM32L081RBT7 retains the same broad footprint, memory class, clock rate, and temperature suffix while adding STM32L081-specific features, so use it when those features provide value. STM32L081RBT6 is appropriate when the 85°C limit is acceptable. STM32L061RBT6 and STM32L051RBT6 reduce Flash from 128 KB to 64 KB, while STM32L031RBT6 reduces it to 32 KB; choose those only after confirming firmware size and peripheral requirements. No cross-manufacturer drop-in candidate was established, so validate any second source at the register, peripheral, clock, and application levels.

Comparação com alternativas

Parâmetro Este produto STM32L071RBT6 STM32L081RBT6 STM32L081RBT7 STM32L061RBT6 STM32L051RBT6 STM32L031RBT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 128 KB 128 KB 128 KB 128 KB 64 KB 64 KB 32 KB
Temperature Suffix T7 T6 T6 T7 T6 T6 T6
Nominal Temperature Range -40°C to +105°C -40°C to +85°C -40°C to +85°C -40°C to +105°C -40°C to +85°C -40°C to +85°C -40°C to +85°C
Program Memory Flash Flash Flash Flash Flash Flash Flash
Device Family STM32L071RB STM32L071RB STM32L081RB STM32L081RB STM32L061RB STM32L051RB STM32L031RB
Special Features Ultra-low-power STM32L0 access-line MCU Ultra-low-power STM32L0 access-line MCU STM32L0 family with additional device features STM32L0 family with additional device features STM32L0 family with reduced memory configuration STM32L0 family with reduced memory configuration STM32L0 family with reduced memory configuration

Principais diferenciais

  • Closest same-footprint alternative retains the principal memory and processor configuration (vs STM32L071RBT6)
  • Same-package STM32L081 options preserve the 128 KB Flash class (vs STM32L081RBT6)
  • Broader memory headroom than lower-density STM32L0 alternatives (vs STM32L031RBT6)

Notas de projeto

Design the supply network around the manufacturer's electrical-characteristics table rather than the nominal 3.3 V convention alone. Place the required bypass capacitors adjacent to the appropriate VDD and VSS pins, keep the high-current return path compact, and verify startup and brownout behavior at the regulator's minimum output. If the board sleeps for long intervals, account for wake-up current, leakage, and the current required by external sensors and communications hardware.

Use the manufacturer 64-LQFP land pattern and pin numbering directly when defining the footprint. Preserve access to all programming and debug signals during layout, especially boot and reset functions. Separate clocks, communications, and sensor inputs from high-current switching loops, and use a continuous ground reference under the device where the recommended layout permits it. A courtyard and solder-mask definition should also be checked against the assembler's 10 x 10 mm LQFP rules.

Do not substitute a family member solely because its suffix ends in RB and its package is LQFP-64. STM32L031RB, STM32L051RB, STM32L061RB, STM32L071RB, and STM32L081RB differ in memory and peripheral resources. After any substitution, reload the correct device definition, regenerate clock and peripheral initialization, and repeat boot, interrupt, communication, and low-power tests.

Use the manufacturer's package thermal data and the board's actual copper and airflow conditions when estimating junction temperature. The LQFP package can dissipate heat through its leads and exposed board area, but thermal performance depends strongly on PCB construction. Evaluate the worst-case processor activity, ambient temperature, and supply voltage, and keep test points accessible so thermal behavior can be measured during validation rather than inferred only from the nominal package rating.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The catalog listing identifies STM32L071RBT7 as RoHS3 compliant and active. Other compliance attributes are not stated in the available product information.

Buscas relacionadas

STM32L071RBT7 datasheet STM32L071RBT7 datasheet pdf STM32L071RBT7 pinout STM32L071RBT7 price STM32L071RBT7 stock STM32L071RBT7 equivalent STM32L071RBT7 replacement STM32L071RBT7 cross reference STM32L071RBT7 vs STM32L071RBT6 STM32L071RBT7 footprint STM32L071RBT7 schematic STM32L071RB application circuit

Componentes & termos relacionados

STMicroelectronics STM32L071RBT7 STM32L071RB STM32L071RBT6 STM32L081RBT6 STM32L081RBT7 STM32L061RBT6 STM32L051RBT6 STM32L031RBT6 Arm Cortex-M0+ 32-bit RISC core microcontroller MCU embedded system ultra-low-power microcontroller Flash memory 128 KB Flash 64-LQFP LQFP package surface-mount package industrial sensor monitoring data acquisition connected sensor equipment RoHS3 active lifecycle status
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ