STM32L071RBT7 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
MPN: STM32L071RBT7 ✓ פעילSTM32L071RBT7 סקירה
An ultra-low-power microcontroller is an embedded processing platform optimized to operate efficiently across active, sleep, low-power-run, and stop operating modes. Within the product hierarchy, the STM32L071RBT7 is an MCU, a semiconductor containing a CPU, memory, peripherals, and communication interfaces. It is intended for compact systems that require deterministic real-time control without the memory and processing demand of a higher-performance microcontroller.
Key features include a 32-bit Arm Cortex-M0+ processor, a maximum stated CPU frequency of 32 MHz, 128 KB of Flash organized as 128K x 8, and a 64-LQFP package measuring 10 x 10 mm. These characteristics make the device suitable for industrial sensing, connected equipment, portable instruments, and compact control modules. The external footprint also supports board designs that require more I/O than smaller 32-pin and 48-pin MCU packages can provide.
The STM32L071RBT7 uses the Arm Cortex-M0+ RISC architecture, which provides a compact software ecosystem through Arm-compatible instruction sets, development tools, and peripheral patterns. Its 128 KB of on-chip Flash removes the need for an external program-memory device in moderate firmware applications, while the 64-LQFP package exposes a comparatively generous pin count for sensors, communications, control outputs, and debug access.
Typical applications include low-power sensor nodes, industrial monitoring equipment, compact motor and actuator controllers, battery-operated measuring instruments, connected accessories, and embedded control subsystems. The device can also serve as the central controller in communications equipment where 128 KB of Flash and a 32 MHz clock provide a practical balance of capability, footprint, and low-power operation.
PCB design should preserve clean decoupling around each supply pin, route high-current and sensitive signals away from switching nodes, and follow the manufacturer's pin and layout guidance. Firmware should use the appropriate STM32CubeMX device configuration, the correct clock tree, and validated low-power modes. Brownout, reset, and watchdog behavior should also be reviewed before deployment in unattended systems.
This product record combines the manufacturer device identification, package and memory details, replacement considerations, and implementation guidance in a format that helps engineers evaluate the STM32L071RBT7 before schematic capture, PCB layout, firmware planning, and sourcing.
חלופות תחליף ישיר עבור STM32L071RBT7 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32L071RBT7 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type, RoHS Status.
STM32L071RBT6
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32L081RBT6
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32L081RBT7
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32L061RBT6
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32L051RBT6
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32L031RBT6
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32L071RBT7 דירוגים מרביים ומאפיינים חשמליים
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 |
| Program Memory Type | Flash |
| מארז | 64-LQFP |
| Package Dimensions | 10 x 10 mm |
| מספר פינים | 64 pins |
| סוג הרכבה | Surface mount |
| סטטוס RoHS | RoHS3 compliant |
| סטטוס מחזור חיים | Active |
| Manufacturer | STMicroelectronics |
מדריך תצורת פינים של STM32L071RBT7 10 x 10 mm
תצורת פינים עבור STM32L071RBT7 (מארזת 10 x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32L071RBT7.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32L071RBT7 מתאים עבור 6 יישוםs: Industrial Sensor and Monitoring Nodes, Battery-Operated Portable Instruments, Connected Sensor and IoT Equipment, Compact Motor and Actuator Control, Communications and Protocol Bridges, Low-Power Data Acquisition Equipment.
Industrial Sensor and Monitoring Nodes
The STM32L071RBT7 fits industrial monitoring nodes because its 32 MHz Arm Cortex-M0+ core can process sensor readings, apply local filtering, and manage alarms while the STM32L0 family emphasizes low-power operation. Its 128 KB of Flash accommodates firmware, calibration tables, and communication routines without requiring external program memory. The 64-LQFP package provides more I/O than smaller MCU packages, while the T7 temperature class supports operation up to 105°C. Confirm the exact supply limits and peripheral assignments against the manufacturer datasheet before releasing the board.
מומלץ
Battery-Operated Portable Instruments
The STM32L071RBT7 is suitable for battery-operated instruments because the ultra-low-power STM32L0 platform can reduce energy use between user interactions or measurement events. Its 32 MHz Cortex-M0+ core has ample performance for display control, data logging, and sensor conditioning, while 128 KB of Flash supports compact application firmware. The LQFP package is easy to inspect and rework for prototypes. Power-budget the MCU, external sensors, regulator, and indicator separately; actual run time depends on which low-power mode and wake-up sources the finished instrument uses.
מומלץ
Connected Sensor and IoT Equipment
The STM32L071RBT7 can serve as the local controller in connected sensor equipment, combining a 32 MHz Cortex-M0+ core with 128 KB of Flash for protocol handling and device logic. A moderate pin count allows the design to connect sensors, status indicators, communications, and local actuators without moving to a larger package. The MCU's low-power orientation also suits intermittently connected devices. Select communication components based on voltage, current, and timing requirements, and confirm that the chosen radio or transceiver does not dominate the system's energy budget.
מומלץ
Compact Motor and Actuator Control
The STM32L071RBT7 is well suited to compact actuator-control boards because its 32-bit Cortex-M0+ processor can execute deterministic control and supervisory logic, and its 64-LQFP package offers a broad pin complement for encoders, sensors, and control outputs. The 128 KB Flash capacity supports state-machine and position-control firmware. Use timer outputs and external drivers for power switching rather than driving loads directly through MCU pins. Current limits, isolation, flyback protection, and thermal margins must be designed around the motor and driver, not inferred from the MCU rating.
מומלץ
Communications and Protocol Bridges
The STM32L071RBT7 can be used in protocol-conversion and communications-support equipment where a small microcontroller must supervise a data path and manage configuration. Its 32 MHz Cortex-M0+ core is suitable for event handling and byte- or frame-level protocol logic, while 128 KB of Flash provides room for stacks and state tables. The LQFP package simplifies access to UART, SPI, and other communication signals. Validate protocol timing, buffer depth, clock tolerance, and peripheral availability in the selected STM32L071RB device configuration before relying on it for high-throughput traffic.
מומלץ
Low-Power Data Acquisition Equipment
The STM32L071RBT7 fits compact data-acquisition equipment that needs local control, storage, and sensor aggregation under constrained energy budgets. The 128 KB Flash can hold acquisition firmware and parameter sets, and the 32 MHz Cortex-M0+ core can service data-transfer routines while keeping the surrounding circuit simple. Use the 64-LQFP footprint for a direct, inspectable implementation and route analog inputs according to the selected converter's grounding guidance. Validate input bandwidth, acquisition latency, clock stability, and buffer handling in the finished firmware configuration.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32L071RBT7 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32L071RBT6 | STM32L081RBT6 | STM32L081RBT7 | STM32L061RBT6 | STM32L051RBT6 | STM32L031RBT6 |
|---|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB | 64 KB | 32 KB |
| Temperature Suffix | T7 | T6 | T6 | T7 | T6 | T6 | T6 |
| Nominal Temperature Range | -40°C to +105°C | -40°C to +85°C | -40°C to +85°C | -40°C to +105°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Program Memory | Flash | Flash | Flash | Flash | Flash | Flash | Flash |
| Device Family | STM32L071RB | STM32L071RB | STM32L081RB | STM32L081RB | STM32L061RB | STM32L051RB | STM32L031RB |
| Special Features | Ultra-low-power STM32L0 access-line MCU | Ultra-low-power STM32L0 access-line MCU | STM32L0 family with additional device features | STM32L0 family with additional device features | STM32L0 family with reduced memory configuration | STM32L0 family with reduced memory configuration | STM32L0 family with reduced memory configuration |
מבדילים עיקריים
- Closest same-footprint alternative retains the principal memory and processor configuration (לעומתSTM32L071RBT6)
- Same-package STM32L081 options preserve the 128 KB Flash class (לעומתSTM32L081RBT6)
- Broader memory headroom than lower-density STM32L0 alternatives (לעומתSTM32L031RBT6)
הערות תכנון
Design the supply network around the manufacturer's electrical-characteristics table rather than the nominal 3.3 V convention alone. Place the required bypass capacitors adjacent to the appropriate VDD and VSS pins, keep the high-current return path compact, and verify startup and brownout behavior at the regulator's minimum output. If the board sleeps for long intervals, account for wake-up current, leakage, and the current required by external sensors and communications hardware.
Use the manufacturer 64-LQFP land pattern and pin numbering directly when defining the footprint. Preserve access to all programming and debug signals during layout, especially boot and reset functions. Separate clocks, communications, and sensor inputs from high-current switching loops, and use a continuous ground reference under the device where the recommended layout permits it. A courtyard and solder-mask definition should also be checked against the assembler's 10 x 10 mm LQFP rules.
Do not substitute a family member solely because its suffix ends in RB and its package is LQFP-64. STM32L031RB, STM32L051RB, STM32L061RB, STM32L071RB, and STM32L081RB differ in memory and peripheral resources. After any substitution, reload the correct device definition, regenerate clock and peripheral initialization, and repeat boot, interrupt, communication, and low-power tests.
Use the manufacturer's package thermal data and the board's actual copper and airflow conditions when estimating junction temperature. The LQFP package can dissipate heat through its leads and exposed board area, but thermal performance depends strongly on PCB construction. Evaluate the worst-case processor activity, ambient temperature, and supply voltage, and keep test points accessible so thermal behavior can be measured during validation rather than inferred only from the nominal package rating.
מידע על תאימות
The catalog listing identifies STM32L071RBT7 as RoHS3 compliant and active. Other compliance attributes are not stated in the available product information.