STMicroelectronics

STM32L071VBT6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics

N.º da peça: STM32L071VBT6 ✓ Ativo
1.65 V to 3.6 V Vdss 100-lead LQFP Package 32 MHz Speed 128 KB Memory
MOQ: 1 |

STM32L071VBT6 Visão geral

The STMicroelectronics STM32L071VBT6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core, 32 MHz maximum operating frequency, 128 KB of flash memory, and 20 KB of SRAM in a 100-lead LQFP package measuring 14 mm by 14 mm. Its operating supply range is 1.65 V to 3.6 V, making it suitable for compact embedded systems operating from low-voltage rails.

An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption during active processing, standby, and low-power states. The STM32L0 access-line family combines general-purpose embedded control with small memory requirements and a broad pin count. Within the device hierarchy, STM32L071VBT6 belongs to STM32L0 series MCUs, Arm Cortex-M0+ processors, 32-bit embedded controllers, and the broader semiconductor category.

The headline configuration includes a 32 MHz Arm Cortex-M0+ processor, 128 KB of program flash, 20 KB of SRAM, and 84 I/O lines in an LQFP-100 package. The 128 KB flash capacity provides room for application code, configuration data, and boot routines, while the 20 KB SRAM supports stack space, working variables, buffers, and peripheral data handling. The 84 available I/O positions also allow a board to expose sensors, communication interfaces, control signals, indicators, and external memory connections.

STMicroelectronics describes the STM32L071xx devices as access-line ultra-low-power MCUs built around the Arm Cortex-M0+ 32-bit RISC core. The STM32L071VBT6 operates up to 32 MHz and operates from a 1.65 V to 3.6 V supply. Its large LQFP-100 footprint supports broad external connectivity, although the higher pin count makes the package physically larger than compact 32-pin or 48-pin microcontroller options.

Typical application areas include battery-operated sensors, industrial monitoring equipment, compact control modules, connected measurement devices, low-power data loggers, and embedded products that require substantial I/O capacity. In these systems, the 128 KB flash supports a complete embedded application without an external program-memory device, while the 20 KB RAM can accommodate protocol buffers and application state.

Design around the 1.65 V minimum operating voltage and confirm the supply tolerance of every attached peripheral. Decoupling, grounding, and signal routing should follow the guidance in the manufacturer datasheet and reference hardware. Because the package has 100 leads, pin assignment and escape routing require careful review before committing the PCB layout.

This product overview consolidates the verified device identity, memory configuration, package information, operating limits, sourcing route, and engineering selection considerations. It also distinguishes the confirmed STM32L071VBT6 configuration from unverified substitute devices, helping designers avoid assuming that a similar MCU is pin-to-pin compatible.

Alternativas drop-in para STM32L071VBT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32L071VBT6 (mesmo formato e footprint) — diferindo em Architecture, Package, Product Type.

STMicroelectronics
Architecture: 32-bit ARM
Package: 100-pin LQFP (14 x 14 mm)
Product Type: Ultra-low-power 32-bit microcontroller
Comparar com STM32L071VBT6 →

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

STM32L071VBT6 Classificações máximas e características elétricas

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 128 KB
Flash Organization 128K x 8 bits
SRAM 20 KB
Tensão de alimentação de operação 1.65 V to 3.6 V
I/O Count 84 I/O
Encapsulamento 100-lead LQFP
Package Dimensions 14 mm x 14 mm
Tipo de montagem Surface mount
Product Series STM32L0 access line
Status RoHS Compliant

Guia de Configuração de Pinos do STM32L071VBT6 14 mm x 14 mm

Configuração de pinos para STM32L071VBT6 (pacote 14 mm x 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 14 mm x 14 mm para STM32L071VBT6

Nenhum dado detalhado de pinagem disponível para STM32L071VBT6.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32L071VBT6 é adequado para 6 aplicaçãos: Battery-Powered Sensor Nodes, Industrial Monitoring and Control, Compact Data Loggers, Low-Voltage Embedded Control, Connected Measurement Equipment, Medical and Diagnostic Accessories.

🧩

Battery-Powered Sensor Nodes

The STM32L071VBT6 fits battery-powered sensor nodes that need more general-purpose I/O than a compact 32-pin MCU can provide. Its 1.65 V to 3.6 V operating range supports low-voltage supply designs, while 128 KB of flash can hold the acquisition logic, calibration routines, and communication firmware. The 20 KB SRAM provides useful working space for samples and protocol buffers. Designers should select low-leakage peripherals, control the MCU duty cycle, and measure the complete board current because the final battery life depends on sensor and radio activity as well as the MCU.

🏭

Industrial Monitoring and Control

The STM32L071VBT6 is appropriate for industrial monitoring modules that combine several digital inputs, status outputs, communications, and local data handling on one controller. The 84 available I/O lines in the 100-lead LQFP package reduce the need for an I/O expander, and the 128 KB flash can store firmware for acquisition, filtering, diagnostics, and configuration. The 1.65 V to 3.6 V operating range requires a regulated low-voltage rail, and the production design should include industrial EMC testing, surge protection, and appropriate isolation where the connected field wiring exceeds board-level voltage limits.

🖥️

Compact Data Loggers

The STM32L071VBT6 can serve as the control and buffering element in a compact data logger that periodically samples sensors and records information in nonvolatile memory. Its 20 KB SRAM can hold sample batches and working state, while the 128 KB flash stores the logging firmware, configuration, and diagnostic information. The 84 I/O positions allow multiple sensors, status indicators, and storage-control signals to share one controller. For reliable logging, include write-endurance management, brownout detection, data-integrity checks, and a clear mechanism for preventing log data from being overwritten during power loss.

⚡

Low-Voltage Embedded Control

The STM32L071VBT6 supports embedded control platforms built around a 1.65 V to 3.6 V power rail. This voltage range is useful when the design uses a low-energy regulator or derives its operating rail from a compact energy source. Its 32 MHz Arm Cortex-M0+ core provides a responsive platform for control logic, while 128 KB of flash and 20 KB of SRAM leave room for application code and working memory. The supply design must maintain 1.65 V at the MCU during startup and peak processing, and peripheral current limits must be checked against the selected regulator.

📡

Connected Measurement Equipment

The STM32L071VBT6 is suitable for connected measurement equipment where a device must gather several sensor inputs, maintain protocol state, and present local control or status signals. Its 84 I/O lines offer substantial board-level connectivity, and the 128 KB flash is sufficient for a substantial embedded application without external program storage. The 20 KB SRAM allows acquisition buffers and communication stacks to operate more independently. Board layout should separate sensitive measurement circuitry from fast digital return paths, provide local decoupling at the MCU pins, and verify the complete interface configuration against the manufacturer pin-description table.

💊

Medical and Diagnostic Accessories

The STM32L071VBT6 can be used in compact medical-adjacent monitoring and diagnostic accessories that require a low-power controller, local data handling, and numerous external connections. The 32 MHz Cortex-M0+ processor, 128 KB flash, and 20 KB SRAM are suitable for control firmware, signal conditioning support, logging, and user-interface coordination. Because this classification does not itself establish medical-device certification, the finished product must complete its intended-use risk analysis, electrical-safety assessment, software validation, and applicable regulatory testing. The manufacturer datasheet should govern decoupling, clock, reset, and unused-pin decisions.

What are the key specifications of STM32L071VBT6 that engineers should know?
The STM32L071VBT6 combines a 32 MHz Arm Cortex-M0+ core, 128 KB of flash memory, 20 KB of SRAM, and 84 I/O lines in a 100-lead LQFP package. According to the STMicroelectronics product page, the device is an access-line ultra-low-power MCU operating from 1.65 V to 3.6 V. Its 14 mm by 14 mm LQFP footprint provides extensive external connectivity, making the MCU suitable for embedded monitoring, control, and data-acquisition equipment.
What is the operating voltage of STM32L071VBT6?
The STM32L071VBT6 operates from 1.65 V to 3.6 V. The listed voltage range appears in the verified distributor specification for the exact 100-lead LQFP device, while the STMicroelectronics product page identifies the part as part of the STM32L071xx ultra-low-power family. Design the supply, reset circuitry, and peripheral connections so every attached device remains within the MCU's operating limits.
How much flash and RAM does STM32L071VBT6 have?
The STM32L071VBT6 provides 128 KB of flash memory and 20 KB of SRAM. DigiKey describes the flash as 128K x 8 bits, and LCSC identifies 128 KB of flash together with 20 KB of RAM. These resources allow firmware, configuration tables, boot code, working variables, and communication buffers to be placed in the same microcontroller rather than requiring external memory for moderate embedded workloads.
Where can I download the STM32L071VBT6 datasheet PDF?
The official STM32L071VB product page is the primary location for the STM32L071VBT6 technical documentation and linked manufacturer resources. A separately indexed PDF mirror is also listed in the search results, but engineers should prefer STMicroelectronics for the authoritative document. Use the pin-description table, electrical characteristics, memory map, and package drawings from the manufacturer documentation when designing the PCB.
Where can I find the STM32L071VBT6 pinout?
The STM32L071VBT6 pinout is defined in the pin-description table and package drawing linked from the STMicroelectronics STM32L071VB product page. The device uses a 100-lead LQFP package, so all 100 positions must be assigned during schematic capture and PCB layout, including supply, ground, reset, boot, programming, and GPIO functions. Use the manufacturer pin table rather than inferring functions from another STM32L0 package.
What can replace STM32L071VBT6?
No cross-brand drop-in replacement is confirmed for the STM32L071VBT6. Although the STM32L071VBT6 uses the 100-lead LQFP package, true replacement requires matching the 100-pin footprint, 1.65 V to 3.6 V operating range, memory organization, peripheral functions, startup behavior, and firmware support. A similarly rated MCU should be treated as a functional alternative unless its exact pin compatibility and device characteristics have been independently verified.
Is STM32L071VBT6 pin-compatible with STM32G071 devices?
The STM32L071VBT6 should not be assumed to be pin-compatible with STM32G071 devices solely because both use Arm Cortex-M0+ processors. The target requires the 100-lead LQFP footprint and has 128 KB of flash, 20 KB of SRAM, and 84 I/O lines. STM32G071 ordering variants differ in package and pin count, so a board-level replacement requires an exact package and pin-by-pin comparison rather than a family-level assumption.
Where can I buy STM32L071VBT6 online?
Use the Request a Quote form on this page to request STM32L071VBT6 pricing, stock confirmation, and lead time. The part is an STMicroelectronics 100-lead LQFP microcontroller with 128 KB of flash and a 32 MHz Arm Cortex-M0+ core. When requesting a quotation, include the required quantity, date code preference, target packaging, and delivery location so the sourcing response can reflect the complete production requirement.
What is the price of STM32L071VBT6?
Submit a request through the Request a Quote form on this page for a current STM32L071VBT6 quotation. The structured offer shown on the product page is intended to reflect the selected quantity and current sourcing conditions rather than a static price. The verified device specification confirms 128 KB of flash, 20 KB of RAM, 84 I/O lines, and a 100-lead LQFP package for the exact ordered MPN.
What is the lead time for STM32L071VBT6?
Current lead time for STM32L071VBT6 should be confirmed through the Request a Quote form on this page. Lead time can depend on quantity, stock position, packaging configuration, and date-code requirements. The exact device is identified as an active STMicroelectronics STM32L071VBT6 in a 100-lead LQFP package, so including your production forecast helps the supplier determine the appropriate sourcing schedule.
Is STM32L071VBT6 in stock?
Request a stock confirmation for STM32L071VBT6 through the Request a Quote form on this page. The product is the exact 100-lead LQFP ordering code with 128 KB of flash and a 32 MHz Arm Cortex-M0+ core. Supply status should be checked for the quantity and packaging required by the build, particularly when planning prototype, qualification, and production-material orders.
When should I choose STM32L071VBT6 over a smaller-footprint MCU?
Choose the STM32L071VBT6 when a design needs 84 I/O lines, 128 KB of flash, and 20 KB of SRAM in a single microcontroller. Its 100-lead LQFP package occupies more PCB area than 32-pin or 48-pin devices, but it reduces the need for external I/O expanders or multiplexers. Select it when that pin capacity and integrated memory justify the larger package and routing effort.
Is STM32L071VBT6 suitable for battery-powered equipment?
The STM32L071VBT6 is suitable for battery-powered applications that benefit from an ultra-low-power MCU architecture and a 1.65 V minimum operating voltage. STMicroelectronics identifies the STM32L071xx series as an access-line ultra-low-power family. Actual battery life still depends on the selected operating mode, external sensor load, regulator efficiency, wake-up frequency, and board leakage, so complete the system power budget before fixing the design.
STM32L071VBT6 vs STM32G071C8T6TR - which is better for a new design?
The STM32L071VBT6 is preferable when the design requires the 100-lead LQFP package, 84 I/O lines, 128 KB of flash, and 20 KB of SRAM. The STM32G071C8T6TR is a different package and memory configuration, so it is not a drop-in substitute for a populated STM32L071VBT6 board. Select between them by comparing the required pin count, memory, peripherals, voltage range, firmware ecosystem, and availability rather than by core name alone.
Does the STM32L071VBT6 support RoHS-compliant manufacturing?
The verified STM32L071VBT6 distributor listing identifies the exact device as RoHS compliant. This supports use in RoHS-controlled manufacturing processes, subject to the normal handling, traceability, and material-declaration requirements of the finished product. Other environmental declarations such as REACH, halogen-free status, conflict-minerals compliance, and automotive qualification should be confirmed separately because they are not established by the RoHS listing alone.

Dados de referência de engenharia para STM32L071VBT6 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STM32L071VBT6 when the design needs a large number of I/O lines, 128 KB of flash, and 20 KB of SRAM without adding external memory or a separate I/O expander. Its 100-lead LQFP package is the primary trade-off because it requires more PCB area and careful 0.5 mm pitch routing than a 48-pin MCU. Choose a smaller STM32G071 variant when the application needs only a modest pin count and board space is more important than RAM, flash, and external connectivity. Do not select either device as a board-level drop-in replacement without an exact package and pin comparison. A functional alternative may require changes to firmware, peripheral assignments, startup behavior, or the PCB, so validate the complete electrical, mechanical, and software requirements before production release.

Principais diferenciais

  • High I/O capacity for embedded control (vs STM32G071C8T6TR)
  • Substantial integrated memory for a compact MCU (vs STM32G071C8T6TR)
  • Low-voltage operating range (vs STM32G071C8T6TR)

Notas de projeto

Design the supply for the full 1.65 V to 3.6 V operating range and ensure the 1.65 V minimum is maintained during startup, reset, and peak processing. Place the local input-decoupling network at the power pins and follow the capacitor values and layout in the manufacturer documentation. Check peripheral load current and transient demand against the selected regulator so MCU brownout behavior is not caused by an inadequately sized rail.

The 100-lead LQFP footprint requires careful escape routing between the 0.5 mm pitch leads. Use the manufacturer land pattern and pin table, preserve a consistent assembly orientation, and route sensitive inputs away from noisy switching nodes. Because the package exposes 84 I/O lines, create a pin-assignment matrix before schematic capture and identify programming, boot, reset, clock, and debug functions explicitly to avoid later footprint changes.

Do not treat another STM32L0 or Arm Cortex-M0+ MCU as a drop-in replacement merely because it has a similar instruction set. Confirm the exact 100-lead package, pin functions, power pins, ground pins, debug interface, boot behavior, peripheral assignments, and memory organization against the manufacturer datasheet. Also verify whether a proposed substitute requires different firmware initialization, even when its electrical specifications appear comparable.

The LQFP-100 package provides a larger exposed copper area than a small QFN package, but thermal performance still depends on the PCB copper and assembly construction. Follow the recommended land pattern, preserve solder-paste coverage on the thermal pad if applicable, and avoid cutting away copper beneath the device. Final thermal qualification should be performed with the actual board, enclosure, programmed workload, and ambient conditions because application behavior affects junction temperature.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The exact-device distributor listing identifies the STM32L071VBT6 as RoHS compliant. Other compliance and qualification declarations were not established by the available manufacturer and distributor information.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM32L071VBT6 datasheet STM32L071VBT6 pinout STM32L071VBT6 datasheet pdf STM32L071VBT6 equivalent STM32L071VBT6 replacement STM32L071VBT6 cross reference STM32L071VBT6 price STM32L071VBT6 stock STM32L071VBT6 128KB 32MHz STM32L071VBT6 LQFP-100 footprint STMicroelectronics STM32L071VBT6 STM32L071VBT6 vs STM32G071C8T6TR STM32L071VBT6 low voltage MCU STM32L071VBT6 battery powered sensor

Componentes & termos relacionados

STMicroelectronics STM32L071VBT6 STM32L071xx STM32L0 series Arm Cortex-M0+ 32-bit RISC core ultra-low-power microcontroller embedded microcontroller microcontroller unit semiconductor 128 KB flash memory 20 KB SRAM 84 I/O lines 1.65 V minimum operating voltage 3.6 V maximum operating voltage 32 MHz CPU LQFP-100 100-lead LQFP 14 mm x 14 mm package surface-mount package QFN family industrial monitoring battery-powered sensor nodes connected measurement equipment RoHS
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ