STM32L071VBT6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
MPN: STM32L071VBT6 ✓ פעילSTM32L071VBT6 סקירה
An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption during active processing, standby, and low-power states. The STM32L0 access-line family combines general-purpose embedded control with small memory requirements and a broad pin count. Within the device hierarchy, STM32L071VBT6 belongs to STM32L0 series MCUs, Arm Cortex-M0+ processors, 32-bit embedded controllers, and the broader semiconductor category.
The headline configuration includes a 32 MHz Arm Cortex-M0+ processor, 128 KB of program flash, 20 KB of SRAM, and 84 I/O lines in an LQFP-100 package. The 128 KB flash capacity provides room for application code, configuration data, and boot routines, while the 20 KB SRAM supports stack space, working variables, buffers, and peripheral data handling. The 84 available I/O positions also allow a board to expose sensors, communication interfaces, control signals, indicators, and external memory connections.
STMicroelectronics describes the STM32L071xx devices as access-line ultra-low-power MCUs built around the Arm Cortex-M0+ 32-bit RISC core. The STM32L071VBT6 operates up to 32 MHz and operates from a 1.65 V to 3.6 V supply. Its large LQFP-100 footprint supports broad external connectivity, although the higher pin count makes the package physically larger than compact 32-pin or 48-pin microcontroller options.
Typical application areas include battery-operated sensors, industrial monitoring equipment, compact control modules, connected measurement devices, low-power data loggers, and embedded products that require substantial I/O capacity. In these systems, the 128 KB flash supports a complete embedded application without an external program-memory device, while the 20 KB RAM can accommodate protocol buffers and application state.
Design around the 1.65 V minimum operating voltage and confirm the supply tolerance of every attached peripheral. Decoupling, grounding, and signal routing should follow the guidance in the manufacturer datasheet and reference hardware. Because the package has 100 leads, pin assignment and escape routing require careful review before committing the PCB layout.
This product overview consolidates the verified device identity, memory configuration, package information, operating limits, sourcing route, and engineering selection considerations. It also distinguishes the confirmed STM32L071VBT6 configuration from unverified substitute devices, helping designers avoid assuming that a similar MCU is pin-to-pin compatible.
חלופות תחליף ישיר עבור STM32L071VBT6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32L071VBT6 (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Package, Product Type.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותSTM32L071VBT6 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| SRAM | 20 KB |
| מתח אספקה פעיל | 1.65 V to 3.6 V |
| I/O Count | 84 I/O |
| מארז | 100-lead LQFP |
| Package Dimensions | 14 mm x 14 mm |
| סוג הרכבה | Surface mount |
| Product Series | STM32L0 access line |
| סטטוס RoHS | Compliant |
מדריך תצורת פינים של STM32L071VBT6 14 mm x 14 mm
תצורת פינים עבור STM32L071VBT6 (מארזת 14 mm x 14 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32L071VBT6.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32L071VBT6 מתאים עבור 6 יישוםs: Battery-Powered Sensor Nodes, Industrial Monitoring and Control, Compact Data Loggers, Low-Voltage Embedded Control, Connected Measurement Equipment, Medical and Diagnostic Accessories.
Battery-Powered Sensor Nodes
The STM32L071VBT6 fits battery-powered sensor nodes that need more general-purpose I/O than a compact 32-pin MCU can provide. Its 1.65 V to 3.6 V operating range supports low-voltage supply designs, while 128 KB of flash can hold the acquisition logic, calibration routines, and communication firmware. The 20 KB SRAM provides useful working space for samples and protocol buffers. Designers should select low-leakage peripherals, control the MCU duty cycle, and measure the complete board current because the final battery life depends on sensor and radio activity as well as the MCU.
Industrial Monitoring and Control
The STM32L071VBT6 is appropriate for industrial monitoring modules that combine several digital inputs, status outputs, communications, and local data handling on one controller. The 84 available I/O lines in the 100-lead LQFP package reduce the need for an I/O expander, and the 128 KB flash can store firmware for acquisition, filtering, diagnostics, and configuration. The 1.65 V to 3.6 V operating range requires a regulated low-voltage rail, and the production design should include industrial EMC testing, surge protection, and appropriate isolation where the connected field wiring exceeds board-level voltage limits.
Compact Data Loggers
The STM32L071VBT6 can serve as the control and buffering element in a compact data logger that periodically samples sensors and records information in nonvolatile memory. Its 20 KB SRAM can hold sample batches and working state, while the 128 KB flash stores the logging firmware, configuration, and diagnostic information. The 84 I/O positions allow multiple sensors, status indicators, and storage-control signals to share one controller. For reliable logging, include write-endurance management, brownout detection, data-integrity checks, and a clear mechanism for preventing log data from being overwritten during power loss.
Low-Voltage Embedded Control
The STM32L071VBT6 supports embedded control platforms built around a 1.65 V to 3.6 V power rail. This voltage range is useful when the design uses a low-energy regulator or derives its operating rail from a compact energy source. Its 32 MHz Arm Cortex-M0+ core provides a responsive platform for control logic, while 128 KB of flash and 20 KB of SRAM leave room for application code and working memory. The supply design must maintain 1.65 V at the MCU during startup and peak processing, and peripheral current limits must be checked against the selected regulator.
Connected Measurement Equipment
The STM32L071VBT6 is suitable for connected measurement equipment where a device must gather several sensor inputs, maintain protocol state, and present local control or status signals. Its 84 I/O lines offer substantial board-level connectivity, and the 128 KB flash is sufficient for a substantial embedded application without external program storage. The 20 KB SRAM allows acquisition buffers and communication stacks to operate more independently. Board layout should separate sensitive measurement circuitry from fast digital return paths, provide local decoupling at the MCU pins, and verify the complete interface configuration against the manufacturer pin-description table.
Medical and Diagnostic Accessories
The STM32L071VBT6 can be used in compact medical-adjacent monitoring and diagnostic accessories that require a low-power controller, local data handling, and numerous external connections. The 32 MHz Cortex-M0+ processor, 128 KB flash, and 20 KB SRAM are suitable for control firmware, signal conditioning support, logging, and user-interface coordination. Because this classification does not itself establish medical-device certification, the finished product must complete its intended-use risk analysis, electrical-safety assessment, software validation, and applicable regulatory testing. The manufacturer datasheet should govern decoupling, clock, reset, and unused-pin decisions.
נתוני עזר הנדסיים עבור STM32L071VBT6 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
מבדילים עיקריים
- High I/O capacity for embedded control (לעומתSTM32G071C8T6TR)
- Substantial integrated memory for a compact MCU (לעומתSTM32G071C8T6TR)
- Low-voltage operating range (לעומתSTM32G071C8T6TR)
הערות תכנון
Design the supply for the full 1.65 V to 3.6 V operating range and ensure the 1.65 V minimum is maintained during startup, reset, and peak processing. Place the local input-decoupling network at the power pins and follow the capacitor values and layout in the manufacturer documentation. Check peripheral load current and transient demand against the selected regulator so MCU brownout behavior is not caused by an inadequately sized rail.
The 100-lead LQFP footprint requires careful escape routing between the 0.5 mm pitch leads. Use the manufacturer land pattern and pin table, preserve a consistent assembly orientation, and route sensitive inputs away from noisy switching nodes. Because the package exposes 84 I/O lines, create a pin-assignment matrix before schematic capture and identify programming, boot, reset, clock, and debug functions explicitly to avoid later footprint changes.
Do not treat another STM32L0 or Arm Cortex-M0+ MCU as a drop-in replacement merely because it has a similar instruction set. Confirm the exact 100-lead package, pin functions, power pins, ground pins, debug interface, boot behavior, peripheral assignments, and memory organization against the manufacturer datasheet. Also verify whether a proposed substitute requires different firmware initialization, even when its electrical specifications appear comparable.
The LQFP-100 package provides a larger exposed copper area than a small QFN package, but thermal performance still depends on the PCB copper and assembly construction. Follow the recommended land pattern, preserve solder-paste coverage on the thermal pad if applicable, and avoid cutting away copper beneath the device. Final thermal qualification should be performed with the actual board, enclosure, programmed workload, and ambient conditions because application behavior affects junction temperature.
מידע על תאימות
The exact-device distributor listing identifies the STM32L071VBT6 as RoHS compliant. Other compliance and qualification declarations were not established by the available manufacturer and distributor information.