STM32L152VET6 - 32MHz Cortex-M3 512KB MCU | STMicroelectronics
N.º da peça: STM32L152VET6 ✓ AtivoSTM32L152VET6 Visão geral
An ultra-low-power microcontroller is an embedded controller designed to maintain accurate operation while minimizing energy consumption during active processing, standby, and low-power modes. Within the product hierarchy, the STM32L152VET6 is a 32-bit microcontroller, a microcontroller IC, a semiconductor, and a member of the Arm Cortex-M and STM32L1 ecosystems. This positioning makes it suitable for portable, industrial, medical, and connected products where energy efficiency and integrated peripherals matter.
The 512 KB flash capacity supports substantially larger firmware than smaller STM32L1 variants, while the 32 MHz Cortex-M3 core handles real-time control, communications, and supervisory tasks. Integrated USB, two operational amplifiers, and a 100-pin package reduce the number of discrete components required on the PCB. The broad pin count also exposes more general-purpose I/O than packages with fewer leads, supporting parallel interfaces, analog signals, and multiple peripheral connections.
STMicroelectronics positions the STM32L152VE family as an active ultra-low-power Arm Cortex-M3 MCU with 512 KB flash. Its combination of 32-bit processing, integrated analog features, USB connectivity, and a large LQFP footprint supports designs that need both control capability and flexible external interfacing. The STM32L152VET6 suffix identifies the specific ordering configuration, while the functional family designation is STM32L152VE.
Typical uses include industrial sensor controllers, USB-connected data loggers, medical monitoring equipment, portable instruments, and low-power embedded systems. The integrated USB is particularly useful for configuration, firmware update, and data transfer, while the operational amplifiers can support analog front ends without adding separate amplifier packages.
PCB design should preserve the manufacturer-recommended decoupling and signal-routing layout. USB differential routing requires controlled impedance and minimized branch length, while analog inputs connected to the operational amplifiers should use short traces and a quiet ground reference. Confirm the exact pin assignments, voltage limits, and peripheral multiplexing in the manufacturer datasheet before final routing.
This product page consolidates the core MCU specifications, package information, sourcing path, practical application guidance, and verified drop-in alternatives. It also highlights the meaningful distinctions between same-footprint STM32L1 options so engineers can select the correct device without assuming that every 100-LQFP member provides identical USB, analog, or peripheral features.
Alternativas drop-in para STM32L152VET6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32L152VET6 (mesmo formato e footprint) — diferindo em Package, Supply Voltage.
STM32L151VET6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32L162VET6
✅ Drop-InConsulte o preço
Ver ficha técnica →STM32L152VET6 Classificações máximas e características elétricas
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Architecture | 32-bit RISC |
| Encapsulamento | 100-LQFP, 14 x 14 mm |
| Número de pinos | 100 pins |
| USB Interface | 1 integrated USB interface |
| Operational Amplifiers | 2 integrated operational amplifiers |
| ADC Resolution | 12 bits |
| Tensão de alimentação | 2.5 V or 3.3 V |
| Tipo de montagem | Surface-mount LQFP |
| Frequência máxima de clock | 32 MHz |
Guia de Configuração de Pinos do STM32L152VET6 100-lqfp, 14 x 14 mm
Configuração de pinos para STM32L152VET6 (pacote 100-lqfp, 14 x 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32L152VET6.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32L152VET6 é adequado para 6 aplicaçãos: USB Data Logger, Industrial Sensor Controller, Medical Monitoring Instrument, Portable Environmental Monitor, USB-C Configuration Tool, Low-Power Embedded Control.
USB Data Logger
The STM32L152VET6 fits a USB-connected data logger because it combines a 32 MHz Arm Cortex-M3 core with 512 KB of flash and an integrated USB interface. Firmware can maintain acquisition timing, store event information, and expose recorded data through USB without requiring a separate USB controller. The two integrated operational amplifiers can also condition low-level analog inputs before conversion. A practical design should reserve the exact USB pins defined by the manufacturer datasheet, provide compliant bus termination, and apply controlled-impedance routing to the USB D+ and D- pair.
Recomendado
Industrial Sensor Controller
The STM32L152VET6 is appropriate for industrial sensor aggregation because its 100-LQFP package exposes a large pin count while the Cortex-M3 core handles real-time sampling and control. The 512 KB flash capacity can accommodate sensor drivers, filtering routines, communication stacks, and configuration storage. Two integrated operational amplifiers reduce the component count in low-level measurement paths. Designers should separate analog and digital return currents, follow the recommended decoupling arrangement, and confirm operating-temperature limits against the enclosure's worst-case ambient and internal temperature conditions.
Recomendado
Medical Monitoring Instrument
The STM32L152VET6 can serve as the control processor in a medical monitoring instrument where a 32-bit Cortex-M3 core, 512 KB flash, and integrated operational amplifiers are valuable. The amplifiers can support front-end conditioning around sensors, while the MCU performs acquisition, filtering, status control, and interface management. Low-power operation helps manage energy in portable instruments. For medical applications, engineers should verify the device qualification status, electrical limits, noise performance, isolation strategy, and applicable product standards independently before production release.
Recomendado
Portable Environmental Monitor
The STM32L152VET6 suits a portable environmental monitor because the STM32L1 family is designed around low-power operation and the MCU provides 512 KB of flash for local control code. It can coordinate periodic sensor readings, display updates, data buffering, and low-rate communication without keeping every peripheral active continuously. The integrated operational amplifiers may condition sensor outputs and the 12-bit ADC supports digitizing suitable analog inputs. Battery-life optimization should be based on measured duty-cycle behavior, including sensor warm-up time, regulator quiescent current, and time spent in the selected low-power mode.
Recomendado
USB-C Configuration Tool
The STM32L152VET6 can implement a compact USB configuration tool for calibrating, programming, or retrieving diagnostic data from external equipment. Its integrated USB interface simplifies host connectivity, while 512 KB of flash supports command handlers, device descriptors, firmware update logic, and field diagnostics. The 100-LQFP package also leaves access to numerous I/O for status LEDs, buttons, and local displays. Firmware should implement USB enumeration and suspend handling carefully, while the PCB must preserve the manufacturer's USB routing and component-placement recommendations.
Recomendado
Low-Power Embedded Control
The STM32L152VET6 is well suited to low-power embedded control because it combines a responsive 32 MHz Cortex-M3 core with an STM32L1 ultra-low-power positioning and a generous 100-pin interface count. It can coordinate motors, relays, sensors, communication links, and local status functions while retaining ample flash for application code. The two operational amplifiers may assist with signal conditioning, reducing board area in measurement and control subsystems. The final power budget should include the MCU, sensors, interface circuits, regulators, and load-switch leakage, because system standby performance depends on the complete design rather than one component.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32L152VET6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32L151VET6 | STM32L162VET6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB |
| Number of Pins | 100 pins | 100 pins | 100 pins |
Principais diferenciais
- Integrated USB in the STM32L152 family (vs STM32L151VET6)
- Large flash and pin count in one low-power MCU (vs STM32L162VET6)
- Integrated analog resources reduce discrete component count (vs STM32L151VET6)
Notas de projeto
Follow the manufacturer reference layout for the 100-LQFP device, including power-pin connections, decoupling capacitors, analog grounds, and exposed pad requirements where applicable. Place bulk and local decoupling close to their associated supply pins, with short and direct return paths. The 14 x 14 mm footprint has 0.5 mm pitch, so assembly capability, solder-mask definitions, and land-pattern clearance should be checked before releasing the board.
Route the USB D+ and D- pair as a controlled-impedance differential pair with continuous reference-plane support, matched-length geometry where required, and no unnecessary stubs. Keep switching nodes and high-current paths away from the operational-amplifier inputs and ADC sources. If the integrated amplifiers drive sensitive sensors, use a quiet ground reference and isolate high-current return paths from the analog return network.
Estimate the complete power budget in every operating mode, including active processing, peripheral activity, analog biasing, and the selected standby state. The 32 MHz Cortex-M3 core and integrated analog functions determine part of the load, while regulators, sensors, interface transceivers, and pull networks can dominate the rest. Validate current and thermal behavior at the highest expected bus voltage and operating temperature rather than relying only on a typical operating point.
Do not treat a shared LQFP package as proof that every peripheral is interchangeable. Before using the STM32L151VET6 or STM32L162VET6, compare the exact pin table, USB implementation, operational-amplifier resources, clock tree, memory organization, startup sequence, and interrupt vector assignments. Firmware portability should be checked with the corresponding device header files and reference manual rather than assuming that a Cortex-M3 binary will run unchanged.
Confirm whether a design requires the non-reel STM32L152VET6 configuration or the STM32L152VET6TR shipping format. The TR suffix represents a different order or shipping code and must not be substituted without confirming reel orientation, tape dimensions, moisture requirements, and production-line handling. Use the manufacturer ordering information and the approved BOM structure to prevent an assembly mismatch.
Informações de conformidade
No definitive compliance declarations were included in the manufacturer product-page summary or distributor snippets. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the current STMicroelectronics product documentation before procurement.