STMicroelectronics

STM32L451CCU6 - 80MHz Cortex-M4 MCU | STMicroelectronics

N.º da peça: STM32L451CCU6 ✓ Ativo
48-UFQFPN, 7 x 7 mm Package 80 MHz Speed 256 KB Memory
MOQ: 1 |

STM32L451CCU6 Visão geral

STMicroelectronics STM32L451CCU6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with floating-point unit, operating up to 80 MHz, and integrating 256 KB of Flash memory in a 48-pin UFQFPN package measuring 7 x 7 mm. The STM32L4 family combines low-power operation with analog, digital, connectivity, security, and timing resources for compact embedded systems.

An ultra-low-power microcontroller is designed to maintain useful processing performance while minimizing energy consumption during active, sleep, and low-power operating states. In the system hierarchy, the STM32L451CCU6 is a microcontroller MCU based on a 32-bit RISC processor, combining embedded processing, memory, peripherals, and power-management functions on one integrated circuit.

Key features include an Arm Cortex-M4 core operating up to 80 MHz, an integrated FPU, 256 KB of Flash memory, and a 48-UFQFPN package. According to the STM32L451xx manufacturer datasheet, the broader STM32L451xx family is positioned for ultra-low-power applications and can deliver performance up to 100 DMIPS. These characteristics support responsive control loops and efficient firmware execution without requiring a separate processor and supporting ICs.

The device belongs to the STM32L4 product family, where low-power design is combined with a high-performance Cortex-M4 core and extensive mixed-signal peripherals. Its 256 KB Flash capacity provides on-chip program storage for control firmware, configuration data, and application logic. The compact 7 x 7 mm package also reduces board footprint, although designers must plan adequate copper area for thermal dissipation and careful layout around exposed-pad and high-speed signals.

Typical applications include industrial sensor nodes, low-power wireless equipment, building controls, battery-powered instruments, motor-control subsystems, compact data loggers, and consumer accessories. The MCU is especially suitable where low-power behavior, compact size, and real-time 32-bit processing are required in the same device. Analog and timing capabilities can reduce the component count in measurement and control designs.

For implementation, review the complete UFQFPN pin definition, exposed-pad connection, decoupling requirements, clock configuration, and low-power mode constraints in the manufacturer datasheet. Firmware should enable peripheral clocks individually, retain the correct reset and boot configuration, and use the documented low-power transitions to obtain the intended energy savings.

This product page combines the manufacturer specifications, package and memory details, practical application guidance, same-package replacement analysis, and design considerations to support faster component selection and PCB planning. It emphasizes engineering trade-offs that matter when embedding the STM32L451CCU6 in a compact, low-power system.

Alternativas drop-in para STM32L451CCU6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32L451CCU6 (mesmo formato e footprint) — diferindo em Package, Processor Core.

STMicroelectronics
Package: 48-pin UFQFPN, 7 x 7 mm
Processor Core: Arm Cortex-M4 with floating-point unit
Comparar com STM32L451CCU6 →

STM32L452CCU6

✅ Drop-In
STMicroelectronics
📦 48-UFQFPN (7 x 7 mm)
Ultra-low-power 32-bit microcontroller · Arm Cortex-M4 with floating-point unit · 80 MHz · 100 DMIPS · 256 KB · 1.71 V to 3.6 V · 256K x 8 bits

Consulte o preço

Ver ficha técnica →

STM32L431CCU6

✅ Drop-In
📦 48-UFQFPN (7 x 7 mm)
Provides a reduced STM32L4 feature set versus STM32L451CCU6 while retaining the Cortex-M4 architecture, 256 KB Flash class, 80 MHz operation, and 48-pin package

📋 Alternativa de referência (fora do catálogo)

STM32L471CCU6

✅ Drop-In
📦 48-UFQFPN (7 x 7 mm)
Provides enhanced peripherals versus STM32L451CCU6 while retaining the Cortex-M4 architecture, 256 KB Flash class, 80 MHz operation, and 48-pin package

📋 Alternativa de referência (fora do catálogo)

STM32L432CCU6

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-UFQFPN (7 x 7 mm)
Uses a related ultra-low-power STM32L4 configuration with the same Cortex-M4 and 256 KB Flash class but a different peripheral mix

📋 Alternativa de referência (fora do catálogo)

STM32L441CCU6

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-UFQFPN (7 x 7 mm)
Uses a related STM32L4 feature configuration with the same Cortex-M4, 256 KB Flash class, 80 MHz class, and 48-pin package

📋 Alternativa de referência (fora do catálogo)

STM32L451CCU6 Classificações máximas e características elétricas

Product Type Ultra-low-power 32-bit microcontroller
Manufacturer STMicroelectronics
Processor Core Arm Cortex-M4
Architecture 32-bit RISC
Maximum Core Frequency 80 MHz
Floating-Point Unit Integrated FPU
Family Performance Rating Up to 100 DMIPS
Flash Memory 256 KB
Flash Organization 256K x 8 bits
Encapsulamento 48-UFQFPN, 7 x 7 mm
Contagem de pinos 48 pins
Tipo de montagem Surface mount

Guia de Configuração de Pinos do STM32L451CCU6 48-ufqfpn, 7 x 7 mm

Configuração de pinos para STM32L451CCU6 (pacote 48-ufqfpn, 7 x 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 48-ufqfpn, 7 x 7 mm para STM32L451CCU6

Nenhum dado detalhado de pinagem disponível para STM32L451CCU6.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32L451CCU6 é adequado para 6 aplicaçãos: Industrial Sensor Nodes, Battery-Powered Instruments, Building Automation, Motor Control Subsystems, Compact Data Loggers, Low-Power Connectivity Equipment.

🏭

Industrial Sensor Nodes

STM32L451CCU6 fits industrial sensor nodes that need local signal conditioning, configuration, and control while maintaining a compact board footprint. Its 80 MHz Arm Cortex-M4 core and integrated FPU can execute filtering and control algorithms, while 256 KB of Flash stores firmware, calibration tables, and configuration data. The 48-pin UFQFPN package supports integration beside sensors and interface ICs without expanding the design beyond a 7 x 7 mm device footprint. Low-power operation is particularly valuable when measurements occur at intervals and the main MCU spends substantial time between active processing cycles. Validate the selected sleep mode, wake sources, analog performance, and peripheral availability against the application workload.

⚡

Battery-Powered Instruments

STM32L451CCU6 is suitable for battery-powered measurement instruments that must balance responsive processing with energy efficiency. The 80 MHz Cortex-M4 core provides enough performance for local calculations, menu logic, and sensor fusion, while 256 KB of Flash provides dedicated program storage for a compact embedded design. Low-power STM32L4 operation can help reduce energy use during idle intervals, provided the designer configures clocks, peripherals, debug behavior, and wake conditions correctly. The 48-pin UFQFPN package also leaves board space for power conversion and storage. For a final battery-life assessment, measure the complete system rather than the MCU alone, including regulator efficiency, pull-up networks, indicator currents, and sensor standby consumption.

🏭

Building Automation

STM32L451CCU6 can serve as the control MCU in building automation equipment such as room controllers, environmental monitors, and distributed actuator nodes. Its Cortex-M4 processing capability supports event handling, scheduled control, and communication-stack tasks, while 256 KB of Flash is sufficient for a focused control application. The ultra-low-power family positioning supports designs that spend much of their operating cycle waiting for timers, sensor updates, or network events. Its 48-pin UFQFPN package permits compact placement behind controls and in distributed wall or ceiling modules. Before deployment, verify the exact UART, I2C, SPI, timer, and low-power resources required by the building system, along with environmental limits and bus isolation requirements.

🔧

Motor Control Subsystems

STM32L451CCU6 is suitable for small motor-control and actuator subsystems where local real-time processing, compactness, and low-power behavior are important. The 80 MHz Arm Cortex-M4 core can execute control tasks, while the integrated FPU supports common signal calculations used in motion or current-control loops. Its 256 KB Flash capacity allows firmware, configuration, and lookup data to remain on-chip, and the 48-pin UFQFPN package simplifies compact controller layouts. The MCU does not remove the need for external power-stage components, gate drivers, current sensing, and protection. Validate timer channels, encoder interfaces, ADC characteristics, control-loop latency, and shutdown paths against the STM32L451xx documentation before assigning the device to a safety-relevant motor function.

🖥️

Compact Data Loggers

STM32L451CCU6 works well in compact data loggers that combine periodic sensor acquisition with local processing and nonvolatile data transfer. Its 256 KB Flash can hold operating firmware and a bounded local data buffer, while the 80 MHz Cortex-M4 core can compress, filter, or timestamp collected measurements. The 48-pin UFQFPN package minimizes the controller footprint, leaving room for external storage, interface protection, and power management. Low-power characteristics can benefit designs that record only at scheduled intervals by reducing active time between acquisitions. The engineering trade-off is that external memory, file-system complexity, and continuous communication can dominate total power consumption. Select external interfaces and storage methods based on logging interval, data volume, retention requirements, and the system's maximum idle duration.

🧩

Low-Power Connectivity Equipment

STM32L451CCU6 can act as the low-power host controller in compact wireless equipment, provided the selected radio interface and protocol stack operate within its available resources. The Cortex-M4 core executes up to 80 MHz, the FPU accelerates common DSP routines, and 256 KB of Flash stores application and protocol firmware. The 48-pin UFQFPN package is useful in wearables, IoT endpoints, and portable accessories where board area is constrained. Low-power execution supports duty-cycled communication designs, but radio current and sleep-mode transitions usually dominate overall energy use. Confirm the MCU's exact communication peripherals, RAM requirement, DMA channels, and package assignments against the manufacturer documentation, and validate the complete firmware stack with the selected wireless module.

What are the key specifications of STM32L451CCU6 that engineers should know?
The STM32L451CCU6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an integrated FPU, a maximum operating frequency of 80 MHz, and 256 KB of Flash memory. It is packaged in a 48-pin UFQFPN measuring 7 x 7 mm. According to the STM32L451xx manufacturer datasheet, the STM32L451xx family supports performance up to 100 DMIPS and is intended for compact, energy-conscious embedded systems.
Where can I download the STM32L451CCU6 datasheet PDF?
The official STM32L451CCU6 datasheet PDF is available from the STMicroelectronics product resource at https://www.st.com/resource/en/datasheet/stm32l451cc.pdf. It covers the STM32L451xx family, including the 48-pin UFQFPN configuration used by STM32L451CCU6. Use the pin-description and electrical-characteristic sections to confirm board connections, operating limits, clocking, decoupling, and exposed-pad requirements before releasing a PCB layout.
What is the operating voltage of STM32L451CCU6?
The STM32L451CCU6 supply-voltage limits must be confirmed in the STM32L451xx manufacturer datasheet. The device supports multiple internal voltage domains for its Cortex-M4 core, I/O, analog, and low-power circuitry, so the external supply range and each rail's limits should not be treated as interchangeable. Consult the electrical-characteristics tables for the exact operating and absolute-maximum values.
How much Flash and SRAM does STM32L451CCU6 have?
The STM32L451CCU6 provides 256 KB of Flash memory organized as 256K x 8 bits. According to the STM32L451xx manufacturer datasheet and distributor specifications, this memory supports an Arm Cortex-M4 core operating up to 80 MHz. The SRAM capacity for this exact orderable device must be checked in the datasheet memory-map and device-description tables before sizing firmware buffers or DMA transfers.
Is STM32L451CCU6 suitable for low-power sensor nodes?
Yes, the STM32L451CCU6 is suitable for low-power sensor-node designs because it is an ultra-low-power STM32L4 microcontroller with a Cortex-M4 core, integrated FPU, and 256 KB of Flash. Its processing capability supports local filtering, configuration, and control without a separate host processor. Actual battery life depends on the selected operating mode, peripheral activity, sampling interval, and board leakage, which should be evaluated against the manufacturer low-power tables.
What is the STM32L451CCU6 pinout and package footprint?
The STM32L451CCU6 uses a 48-pin UFQFPN package measuring 7 x 7 mm. The complete numbered pin functions, exposed-pad requirements, and recommended land pattern must be taken from the STM32L451xx manufacturer datasheet and package drawing. The suffix and family marketing information alone are not sufficient to assign every ball or verify clearance around the exposed pad, so do not substitute a generic 48-pin QFN footprint without checking mechanical dimensions.
What tools and firmware support STM32L451CCU6?
STM32L451CCU6 firmware is supported by the STM32 ecosystem associated with the STM32L4 family. The manufacturer device documentation identifies the Cortex-M4 architecture and ultra-low-power positioning, while the STM32Cube and ST-LINK tooling are the normal development path for programming and debugging. Use the device description and reference manual to confirm bootloader, debug, clock, and peripheral details before selecting a tool configuration or programming sequence.
STM32L451CCU6 vs STM32L452CCU6: which is better for secure connected devices?
STM32L452CCU6 is the better choice when the design requires the additional security-oriented capabilities associated with that family member, while STM32L451CCU6 remains appropriate for designs that do not need those features. Both are listed as pin-compatible STM32L4 options in the 48-UFQFPN package, and both provide 256 KB Flash with an 80 MHz Cortex-M4 core. Review the exact peripheral and security tables before transferring firmware.
When should I choose STM32L451CCU6 over STM32L471CCU6?
Choose STM32L451CCU6 when an ultra-low-power Cortex-M4 design requires 256 KB Flash, an 80 MHz core, and the 48-pin UFQFPN footprint without the additional feature set associated with STM32L471CCU6. Choose the L471 variant when its application needs the expanded peripherals or connectivity that distinguish that member. Firmware and peripheral requirements should be compared before making a drop-in substitution.
What is the best drop-in replacement for STM32L451CCU6?
The closest same-package choices identified for STM32L451CCU6 are STM32L452CCU6, STM32L431CCU6, and STM32L471CCU6, all associated with the STM32L4 family and 48-UFQFPN configuration. These alternatives provide different feature sets rather than identical performance, so a replacement must be validated for memory mapping, peripherals, clock configuration, security functions, and firmware support. Review the manufacturer compatibility and migration documentation before substitution.
Can STM32L431CCU6 replace STM32L451CCU6 on the same PCB?
STM32L431CCU6 is a candidate for a same-package STM32L451CCU6 replacement because it is listed as an equivalent STM32L4 option with reduced feature capability. The shared 48-UFQFPN footprint simplifies mechanical replacement, but a successful substitution also requires checking enabled peripherals, interrupt assignments, memory characteristics, timing, and low-power behavior. Update and validate firmware for the selected device before production use.
What is the best STMicroelectronics equivalent for STM32L451CCU6?
STM32L452CCU6 is the most direct feature-oriented alternative identified for STM32L451CCU6, retaining the STM32L4 family, 256 KB Flash class, 80 MHz Cortex-M4 core, and 48-UFQFPN package while adding cryptographic capabilities. STM32L431CCU6 and STM32L471CCU6 are other same-package choices with different peripheral trade-offs. Select the alternative according to required security, connectivity, analog, and timing functions.
Where can I buy STM32L451CCU6 online?
Use the Request a Quote form on this page to request STM32L451CCU6 pricing, current availability, and lead time for the exact 48-UFQFPN orderable device. The quoted configuration should include the complete STM32L451CCU6 MPN, because related STM32L451 variants may use different package, memory, or temperature options. A formal quote also avoids ambiguity caused by generic STM32L4 family listings.
What is the price of STM32L451CCU6?
Current commercial pricing for STM32L451CCU6 is obtained through the Request a Quote form on this page. The request should specify the exact MPN, required quantity, package configuration, and delivery destination so that supply status and order handling can be confirmed. Use the form for price and lead-time confirmation because commercial terms and component availability can change.
Is STM32L451CCU6 in stock and what is its lead time?
Current stock status and lead time for STM32L451CCU6 should be requested through the Request a Quote form on this page. Include the required production quantity and target delivery date so the supply response reflects the actual order rather than a generic quantity break. Confirm the full suffix and package configuration when requesting the quote to maintain orderable-device accuracy.

Dados de referência de engenharia para STM32L451CCU6 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose STM32L451CCU6 for a compact ultra-low-power design that needs an 80 MHz Arm Cortex-M4 core, an FPU, 256 KB of Flash, and a 48-pin UFQFPN footprint without specialized hardware security or expanded peripherals. Choose STM32L452CCU6 when cryptographic capabilities are required because it retains the same broad platform and memory class while adding security features. Choose STM32L431CCU6 when a reduced STM32L4 feature set is sufficient, but verify that every required peripheral and communication interface remains available. Choose STM32L471CCU6 when enhanced peripherals justify the broader feature set. STM32L432CCU6 and STM32L441CCU6 are related-family candidates, but their exact resources and firmware implications require manufacturer-level confirmation before substitution. In every case, validate package mechanics, timing, memory use, low-power behavior, and peripheral compatibility rather than relying only on the shared footprint.

Comparação com alternativas

Parâmetro Este produto STM32L452CCU6 STM32L431CCU6 STM32L471CCU6 STM32L432CCU6 STM32L441CCU6
Package 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm) 48-UFQFPN (7 x 7 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics

Principais diferenciais

  • Balances an 80 MHz Cortex-M4 core with 256 KB of Flash in a compact package (vs STM32L431CCU6)
  • Supports designs that later need upgraded security capabilities (vs STM32L452CCU6)
  • Provides expanded peripherals for feature-rich connected designs (vs STM32L471CCU6)

Notas de projeto

Use the STMicroelectronics UFQFPN48 land pattern and exposed-pad recommendation for the STM32L451CCU6 rather than a generic 48-pin QFN footprint. Confirm pin-one orientation, pad dimensions, solder-mask clearance, and paste stencil geometry against the package drawing. Provide the required local decoupling directly beside the associated supply pins and keep sensitive analog returns away from switching-node and high-current paths.

Plan the power tree around the MCU's internal voltage domains and the STM32L451xx electrical-characteristics tables. Decouple each required rail independently, maintain the documented sequencing relationships, and avoid routing return currents beneath noisy analog or switching areas. If low-power operation is central to the design, include the leakage of pull-ups, level shifters, sensors, and regulators in the system current budget because their consumption can dominate MCU standby current.

Do not assume that every STM32L4 device with a similar package is software-compatible. Before substituting STM32L452CCU6, STM32L431CCU6, STM32L471CCU6, STM32L432CCU6, or STM32L441CCU6, compare the peripheral mix, interrupt assignments, boot behavior, memory map, clock tree, security features, and low-power modes. Rebuild and validate the firmware with the selected device rather than assuming that identical pin placement guarantees identical behavior.

Keep oscillator and decoupling paths compact, preserve continuous ground beneath the MCU where recommended, and route high-current outputs away from analog inputs. The 7 x 7 mm UFQFPN package allows dense placement, but small geometry can increase thermal gradients and coupling between adjacent nets. Review the exposed-pad copper plan with the assembly house and use thermal-via patterns only where compatible with the recommended footprint.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page and STM32L451xx datasheet were used for product identity, family, processor, frequency, memory class, and package information. Specific compliance declarations were not stated in the cited material, so each status remains unknown.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM32L451CCU6 datasheet STM32L451CCU6 pinout STM32L451CCU6 datasheet pdf STM32L451CCU6 48 UFQFPN STM32L451CCU6 80MHz Cortex-M4 STM32L451CCU6 256KB flash STM32L451CCU6 price STM32L451CCU6 stock STM32L451CCU6 replacement STM32L451CCU6 vs STM32L452CCU6 STM32L451CCU6 application circuit STMicroelectronics STM32L451CCU6

Componentes & termos relacionados

STMicroelectronics STM32L451CCU6 STM32L451xx STM32L4 STM32L452CCU6 STM32L431CCU6 STM32L471CCU6 STM32L432CCU6 STM32L441CCU6 Arm Cortex-M4 ARM Cortex-M4 32-bit RISC core microcontroller MCU embedded microcontroller ultra-low-power microcontroller semiconductor floating-point unit FPU 256 KB Flash memory 80 MHz 100 DMIPS UFQFPN-48 QFN family surface mount SMD low-power mode industrial sensor node building automation motor control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ