STM32L486VGT6 - ARM Cortex-M4F MCU 1MB Flash | STMicroelectronics
N.º da peça: STM32L486VGT6 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.67 | $12,67 |
| 10 | $11.4 | $114,00 |
| 100 | $10.13 | $1.013,00 |
| 500 | $9.12 | $4.560,00 |
| 1.000 | $8.11 | $8.110,00 |
STM32L486VGT6 Visão geral
What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems that require a balance of performance, energy efficiency, and advanced digital signal processing. The Cortex-M4F includes a single-precision FPU and DSP instructions, making it suitable for applications involving real-time control, sensor fusion, and audio processing. In the system hierarchy, it sits above simple 8-bit MCUs but below application processors, offering deterministic real-time behavior with low power consumption.
Key features of the STM32L486VGT6 include an ultra-low-power mode with 100 nA shutdown current, a 12-bit ADC with 5 MSPS, two 12-bit DACs, multiple communication interfaces (USART, SPI, I2C, USB OTG FS, CAN, SAI), and a true random number generator (TRNG). It also integrates a cryptographic acceleration unit (AES, DES, and hash) for secure applications. The device supports a wide supply voltage range of 1.71V to 3.6V, making it ideal for battery-powered devices.
The STM32L486VGT6 is built on ST's ultra-low-power technology, featuring multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop 2, Standby, Shutdown) that allow designers to optimize energy consumption. The FlexPowerControl feature enables independent power domains for the core, I/Os, and backup domain, providing flexibility in power management. The device also includes a 32-bit low-power timer, a real-time clock (RTC) with calendar, and a touch sensing controller.
Typical applications include industrial sensors, smart meters, medical devices, wearable electronics, and IoT nodes. Its combination of low power, high performance, and rich peripherals makes it suitable for applications requiring long battery life without compromising on processing capability. For example, in a smart meter, the STM32L486VGT6 can handle metrology calculations, communication protocols, and display control while maintaining low average power consumption.
When designing with this device, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor at the main supply. For low-power operation, configure unused GPIOs as analog inputs to avoid leakage currents. The device supports in-application programming (IAP) and in-circuit programming (ICP) via SWD or JTAG, facilitating firmware updates in the field.
Alternativas drop-in para STM32L486VGT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32L486VGT6 (mesmo formato e footprint) — diferindo em Core, Flash Memory, SRAM, ADC, Communication Interfaces.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32L486VGT6TR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32L486VGT7
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32L476VGT6
✅ Drop-In✓ Em estoque
$4.09 / unidade
Ver ficha técnica →STM32L496VGT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$9.5455 / unidade
Ver ficha técnica →GD32F450VGT6
⚡ Mesmo encapsulamento ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L486VGT6 Classificações máximas e características elétricas
| Core | ARM Cortex-M4F |
| Maximum Frequency | 80 MHz |
| Flash Memory | 1 MB |
| SRAM | 128 KB |
| Encapsulamento | 100-LQFP (14x14 mm) |
| Supply Voltage Range | 1.71 V to 3.6 V |
| DMIPS | 100 |
| ADC | 12-bit, 5 MSPS |
| DAC | 2x 12-bit |
| Communication Interfaces | USART, SPI, I2C, USB OTG FS, CAN, SAI |
| Cryptographic Acceleration | AES, DES, Hash |
| True Random Number Generator | Yes |
| Low-Power Modes | Sleep, Low-power Run, Low-power Sleep, Stop 2, Standby, Shutdown |
| Corrente de desligamento | 100 nA |
| Temperatura de operação | -40C to +85C |
| Status RoHS | Compliant |
Configuração de pinos do STM32L486VGT6
| Pino 1 | PE2 — GPIO / TRACECLK |
| Pino 2 | PE3 — GPIO / TRACED0 |
| Pino 3 | PE4 — GPIO / TRACED1 |
| Pino 4 | PE5 — GPIO / TRACED2 |
| Pino 5 | PE6 — GPIO / TRACED3 |
| Pino 6 | VBAT — Battery backup supply |
| Pino 7 | PC13 — GPIO / RTC_TAMP1 |
| Pino 8 | PC14 — GPIO / OSC32_IN |
| Pino 9 | PC15 — GPIO / OSC32_OUT |
| Pino 10 | PF0 — GPIO / OSC_IN |
| Pino 11 | PF1 — GPIO / OSC_OUT |
| Pino 12 | NRST — Reset |
| Pino 13 | PC0 — GPIO / ADC_IN10 |
| Pino 14 | PC1 — GPIO / ADC_IN11 |
| Pino 15 | PC2 — GPIO / ADC_IN12 |
| Pino 16 | PC3 — GPIO / ADC_IN13 |
| Pino 17 | VDD — Digital power supply |
| Pino 18 | VSS — Ground |
| Pino 19 | PC4 — GPIO / ADC_IN14 |
| Pino 20 | PC5 — GPIO / ADC_IN15 |
| Pino 21 | PB0 — GPIO / ADC_IN8 |
| Pino 22 | PB1 — GPIO / ADC_IN9 |
| Pino 23 | PB2 — GPIO / BOOT1 |
| Pino 24 | PB10 — GPIO / I2C2_SCL |
| Pino 25 | PB11 — GPIO / I2C2_SDA |
| Pino 26 | VDD — Digital power supply |
| Pino 27 | VSS — Ground |
| Pino 28 | PB12 — GPIO / SPI2_NSS |
| Pino 29 | PB13 — GPIO / SPI2_SCK |
| Pino 30 | PB14 — GPIO / SPI2_MISO |
| Pino 31 | PB15 — GPIO / SPI2_MOSI |
| Pino 32 | PC6 — GPIO / I2S2_MCK |
| Pino 33 | PC7 — GPIO / I2S2_SCK |
| Pino 34 | PC8 — GPIO / I2S2_SD |
| Pino 35 | PC9 — GPIO / I2S2_WS |
| Pino 36 | PA0 — GPIO / ADC_IN0 / WKUP1 |
| Pino 37 | PA1 — GPIO / ADC_IN1 |
| Pino 38 | PA2 — GPIO / ADC_IN2 / USART2_TX |
| Pino 39 | PA3 — GPIO / ADC_IN3 / USART2_RX |
| Pino 40 | VDD — Digital power supply |
| Pino 41 | VSS — Ground |
| Pino 42 | PA4 — GPIO / ADC_IN4 / DAC_OUT1 |
| Pino 43 | PA5 — GPIO / ADC_IN5 / DAC_OUT2 |
| Pino 44 | PA6 — GPIO / ADC_IN6 |
| Pino 45 | PA7 — GPIO / ADC_IN7 |
| Pino 46 | PC10 — GPIO / USART3_TX |
| Pino 47 | PC11 — GPIO / USART3_RX |
| Pino 48 | PC12 — GPIO / USART3_CK |
| Pino 49 | PD0 — GPIO / FSMC_D2 |
| Pino 50 | PD1 — GPIO / FSMC_D3 |
| Pino 51 | PD2 — GPIO / FSMC_D4 |
| Pino 52 | PD3 — GPIO / FSMC_D5 |
| Pino 53 | PD4 — GPIO / FSMC_D6 |
| Pino 54 | PD5 — GPIO / FSMC_D7 |
| Pino 55 | PD6 — GPIO / FSMC_D8 |
| Pino 56 | PD7 — GPIO / FSMC_D9 |
| Pino 57 | VDD — Digital power supply |
| Pino 58 | VSS — Ground |
| Pino 59 | PD8 — GPIO / FSMC_D10 |
| Pino 60 | PD9 — GPIO / FSMC_D11 |
| Pino 61 | PD10 — GPIO / FSMC_D12 |
| Pino 62 | PD11 — GPIO / FSMC_D13 |
| Pino 63 | PD12 — GPIO / FSMC_D14 |
| Pino 64 | PD13 — GPIO / FSMC_D15 |
| Pino 65 | PD14 — GPIO / FSMC_D0 |
| Pino 66 | PD15 — GPIO / FSMC_D1 |
| Pino 67 | PE0 — GPIO / FSMC_NBL0 |
| Pino 68 | PE1 — GPIO / FSMC_NBL1 |
| Pino 69 | PE7 — GPIO / FSMC_D4 |
| Pino 70 | PE8 — GPIO / FSMC_D5 |
| Pino 71 | PE9 — GPIO / FSMC_D6 |
| Pino 72 | PE10 — GPIO / FSMC_D7 |
| Pino 73 | PE11 — GPIO / FSMC_D8 |
| Pino 74 | PE12 — GPIO / FSMC_D9 |
| Pino 75 | PE13 — GPIO / FSMC_D10 |
| Pino 76 | PE14 — GPIO / FSMC_D11 |
| Pino 77 | PE15 — GPIO / FSMC_D12 |
| Pino 78 | VDD — Digital power supply |
| Pino 79 | VSS — Ground |
| Pino 80 | PB3 — GPIO / SPI1_SCK |
| Pino 81 | PB4 — GPIO / SPI1_MISO |
| Pino 82 | PB5 — GPIO / SPI1_MOSI |
| Pino 83 | PB6 — GPIO / I2C1_SCL |
| Pino 84 | PB7 — GPIO / I2C1_SDA |
| Pino 85 | BOOT0 — Boot mode selection |
| Pino 86 | PB8 — GPIO / I2C1_SCL |
| Pino 87 | PB9 — GPIO / I2C1_SDA |
| Pino 88 | PA8 — GPIO / USB_OTG_FS_SOF |
| Pino 89 | PA9 — GPIO / USB_OTG_FS_VBUS |
| Pino 90 | PA10 — GPIO / USB_OTG_FS_ID |
| Pino 91 | PA11 — GPIO / USB_OTG_FS_DM |
| Pino 92 | PA12 — GPIO / USB_OTG_FS_DP |
| Pino 93 | PA13 — GPIO / SWDIO |
| Pino 94 | PA14 — GPIO / SWCLK |
| Pino 95 | PA15 — GPIO / JTDI |
| Pino 96 | PC0 — GPIO / ADC_IN10 |
| Pino 97 | PC1 — GPIO / ADC_IN11 |
| Pino 98 | PC2 — GPIO / ADC_IN12 |
| Pino 99 | PC3 — GPIO / ADC_IN13 |
| Pino 100 | VDD — Digital power supply |
Aplicações típicas
STM32L486VGT6 é adequado para 6 aplicaçãos: Industrial Sensors, Smart Meters, Medical Devices, Wearable Electronics, IoT Nodes, Audio Processing.
Industrial Sensors
The STM32L486VGT6 is ideal for industrial sensors due to its ultra-low-power modes (100 nA shutdown) and high-performance Cortex-M4F core. It can process sensor data with DSP instructions and communicate via CAN or SAI interfaces. The 12-bit ADC at 5 MSPS enables high-speed data acquisition, while the cryptographic acceleration ensures secure data transmission. In a typical industrial sensor node, the MCU reads analog sensor values, processes them with the FPU, and transmits results over CAN bus, maintaining low average power consumption for battery-powered operation.
Recomendado
Smart Meters
The STM32L486VGT6 excels in smart meter applications by combining metrology calculations with communication protocols and display control. Its 80 MHz Cortex-M4F core with FPU handles complex energy calculation algorithms, while the LCD driver and touch sensing controller manage the user interface. The ultra-low-power modes enable long battery life, and the cryptographic acceleration secures data for remote reading. In a smart electricity meter, the MCU samples voltage and current via the ADC, computes energy consumption, and communicates via PLC or RF modules, all while maintaining low power consumption.
Recomendado
Medical Devices
The STM32L486VGT6 is well-suited for portable medical devices like glucose monitors and pulse oximeters. Its ultra-low-power operation (100 nA shutdown) extends battery life, while the FPU and DSP instructions handle signal processing for biosignal analysis. The cryptographic acceleration ensures patient data security. In a wearable health monitor, the MCU reads sensor data, processes ECG or SpO2 signals, and communicates via BLE, all while maintaining a compact form factor and long battery life.
Recomendado
Wearable Electronics
The STM32L486VGT6 is perfect for wearable devices due to its small 100-LQFP package and ultra-low-power modes. The Cortex-M4F core with FPU enables efficient sensor fusion algorithms for motion tracking, while the touch sensing controller handles user input. The device's 1 MB Flash provides ample storage for firmware and data logging. In a smartwatch, the MCU manages the display, sensors, and wireless communication, achieving weeks of battery life through aggressive power management.
Recomendado
IoT Nodes
The STM32L486VGT6 is an excellent choice for IoT nodes, offering a balance of performance and power efficiency. Its multiple communication interfaces (USB OTG FS, CAN, SAI) support various connectivity options, while the cryptographic acceleration ensures secure data transmission. The ultra-low-power modes enable battery-powered operation for years. In a typical IoT sensor node, the MCU collects data from sensors, processes it locally, and transmits it via LoRa or NB-IoT, all while maintaining minimal power consumption.
Recomendado
Audio Processing
The STM32L486VGT6's Cortex-M4F core with FPU and DSP instructions makes it suitable for audio processing applications. The SAI interface supports I2S audio data, and the 12-bit DAC can output analog audio. The device's low power consumption is ideal for portable audio devices. In a voice-controlled device, the MCU captures audio via the ADC, performs noise reduction and keyword detection using the FPU, and communicates results via USB or wireless interfaces.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32L486VGT6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32L486VGT6TR | STM32L486VGT7 | STM32L476VGT6 | STM32L496VGT6 | GD32F450VGT6 |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 320 KB | 256 KB |
| Cryptographic Acceleration | Yes (AES, DES, Hash) | Yes (AES, DES, Hash) | Yes (AES, DES, Hash) | No | Yes (AES, DES, Hash) | No |
| Supply Voltage Range | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 1.71V to 3.6V | 2.6V to 3.6V |
Principais diferenciais
- Integrated cryptographic acceleration (vs STM32L476VGT6)
- True random number generator (TRNG) (vs STM32L476VGT6)
- Ultra-low-power shutdown mode (vs GD32F450VGT6)
Notas de projeto
For ultra-low-power operation, configure unused GPIOs as analog inputs to avoid leakage currents. Use the low-power modes (Stop 2, Standby, Shutdown) to minimize power consumption. The shutdown mode consumes only 100 nA, making it ideal for battery-powered devices. Ensure the power supply is stable and decoupled with 100 nF capacitors close to each VDD pin and a 4.7 uF capacitor at the main supply.
Place decoupling capacitors (100 nF) as close as possible to each VDD pin, and a 4.7 uF bulk capacitor at the main supply. For the crystal oscillator, place the crystal and load capacitors close to the OSC_IN/OSC_OUT pins to minimize parasitic capacitance. Use a ground plane to reduce noise and improve EMC performance.
Ensure the BOOT0 pin is properly configured to select the correct boot mode. For SWD programming, connect PA13 (SWDIO) and PA14 (SWCLK) with pull-up/pull-down resistors as recommended in the datasheet. Avoid driving the VBAT pin with more than 3.6V to prevent damage to the backup domain.
Informações de conformidade
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified - this is a general-purpose MCU.
