Microchip Technology

SY87724LHI - 2.7GHz AnyRate MUX/DEMUX | Microchip Technology

N.º da peça: SY87724LHI ✓ Ativo
3.3 V Vdss 80-lead TQFP with exposed pad, 14 mm x 14 mm Package 2.7 GHz Speed
MOQ: 1 |

SY87724LHI Visão geral

The Microchip Technology SY87724LHI is a 3.3 V AnyRate multiplexed and demultiplexed interface IC that supports operation up to 2.7 GHz. The device provides two channels in an 80-lead TQFP package with an exposed thermal pad, measuring 14 mm by 14 mm. Its surface-mount construction is intended for modern high-speed communication and networking equipment in which protocol-transparent signal routing is required.

An AnyRate MUX/DEMUX is a signal-routing interface that can place multiple communication channels onto a shared physical interface. The MUX function combines parallel or serial data sources, while the DEMUX function separates a shared input into individual outputs. A protocol-transparent device does not interpret or modify the transported payload, allowing existing framing, encoding, and signaling systems to operate without changing their data format.

The SY87724LHI supports protocol-transparent MUX/DEMUX operation up to 2.7 GHz and includes programmable or 10-bit parallel interfaces. Differential clock and serial input/output capabilities support high-speed point-to-point links, while control by framer logic permits the device to follow the timing boundaries established by surrounding network equipment. Synchronous frame-boundary indication helps downstream circuitry determine valid data intervals.

The device uses differential signaling for clock and data paths, which supports the controlled impedance and noise-management practices commonly required in high-speed PCB layouts. Its AnyRate architecture is particularly useful where several physical lanes must be consolidated before transmission or distributed after reception. The 3.3 V supply operation also allows integration with communication ICs operating in conventional 3.3 V signal environments.

Typical applications include network interface equipment, telecommunications line cards, framer and backplane systems, serial links, clock-distribution networks, and data-routing assemblies. The SY87724LHI can also support test equipment when several high-speed signals must be selected without changing the underlying protocol. The exposed thermal pad assists heat transfer from the device to the PCB during operation.

PCB implementation requires careful treatment of the 80-TQFP footprint, including thermal-via placement beneath the exposed pad and controlled-impedance routing for differential clock and serial signals. The input, output, power, and ground connections should be assigned directly from the manufacturer pin-description table and pinout diagram. Because this device operates above 2 GHz, component placement, return paths, connector transitions, and via stubs can materially affect signal integrity.

This product page organizes the SY87724LHI specifications, interface roles, package information, sourcing workflow, and design considerations into one engineering reference. It also distinguishes verified device characteristics from specifications that require confirmation, helping designers evaluate the IC before assigning its 80-pin footprint and high-speed differential interfaces to a communication board.

Alternativas drop-in para SY87724LHI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com SY87724LHI (mesmo formato e footprint) — diferindo em Control Interface, Package, Product Type.

Microchip Technology
Control Interface: Programmable or 10-bit parallel
Package: TQFP-80
Product Type: 3.3 V AnyRate serial-data multiplexer/demultiplexer
Comparar com SY87724LHI →

SY87724LHY

✅ Drop-In
Microchip Technology
📦 80-lead TQFP with exposed pad, 14 mm x 14 mm
3.3 V AnyRate serial-data multiplexer/demultiplexer · 3.3 V · 2.7 GHz · 4-bit, 5-bit, 8-bit, and 10-bit · Protocol-transparent · Programmable or 10-bit parallel · Differential · Differential

Consulte o preço

Ver ficha técnica →

SY87724LHI Especificações

Product Type AnyRate MUX/DEMUX interface IC
Tensão de alimentação 3.3 V
Maximum Operating Frequency 2.7 GHz
Channel Count 2 channels
MUX/DEMUX Configuration 3 x 1
Tipo de interface Protocol-transparent MUX/DEMUX
Control Interface Programmable or 10-bit parallel interface
Clock Interface Differential clock input/output
Data Interface Differential serial input/output
Frame Synchronization Synchronous frame-boundary indication
High-Speed Processing HSPC
Encapsulamento 80-lead TQFP with exposed pad, 14 mm x 14 mm
Tipo de montagem Surface mount
Temperatura de operação -40 °C to 85 °C
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Guia de Configuração de Pinos do SY87724LHI 80-lead tqfp with exposed pad, 14 mm x 14 mm

Configuração de pinos para SY87724LHI (pacote 80-lead tqfp with exposed pad, 14 mm x 14 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 80-lead tqfp with exposed pad, 14 mm x 14 mm para SY87724LHI

Nenhum dado detalhado de pinagem disponível para SY87724LHI.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SY87724LHI é adequado para 6 aplicaçãos: Network Interface Equipment, Telecommunications Line Cards, Framer and Backplane Routing, High-Speed Serial Link Aggregation, Clock Distribution Networks, Communication Test Equipment.

🌐

Network Interface Equipment

The SY87724LHI fits network-interface equipment that must route high-speed differential paths while preserving the underlying transport protocol. Its 3.3 V operation, two-channel configuration, and support for operation up to 2.7 GHz make it suitable for consolidating or separating signals within a communication module. The programmable or 10-bit parallel control allows the routing function to be coordinated with framer logic, while synchronous frame-boundary indication helps receivers identify valid data intervals. A board designer should preserve the differential clock and serial topology and use controlled-impedance routing to realize the device's frequency capability.

📡

Telecommunications Line Cards

The SY87724LHI is appropriate for telecommunications line-card signal routing where multiple high-speed channels must be multiplexed onto or demultiplexed from a shared interface. Protocol-transparent operation up to 2.7 GHz lets the device work alongside existing framing and transport logic without changing the payload format. Differential clock and serial inputs and outputs support controlled-impedance PCB environments, while framer-logic control supports coordinated switching at frame boundaries. The 80-lead TQFP exposed pad also provides a defined thermal path for sustained operation in compact communication equipment.

🔧

Framer and Backplane Routing

The SY87724LHI can support framer and backplane assemblies that require deterministic selection of high-speed serial paths. Its 2.7 GHz maximum operating frequency provides headroom for communication links operating below that limit, while differential clock and data interfaces align with current serial-routing practices. Synchronous frame-boundary indication gives downstream logic a timing reference, and programmable or 10-bit parallel control permits integration with line-card management logic. Placement and return-path planning remain critical because the 80-lead TQFP exposes many routing and power connections in a compact 14 mm by 14 mm footprint.

🔀

High-Speed Serial Link Aggregation

The SY87724LHI is suitable for serial-link aggregation tasks where data paths must be selected, combined, or separated without decoding the transported protocol. Two channels and operation up to 2.7 GHz support high-speed communication assemblies, while differential clock and serial signaling improve signal-integrity control on properly designed boards. The device can be directed by surrounding framer logic and can report synchronous frame boundaries. For production designs, validate insertion loss, return loss, skew, and impedance across the complete path because the IC specification alone cannot compensate for an unsuitable PCB or connector transition.

⏱️

Clock Distribution Networks

The SY87724LHI's differential clock paths make it applicable to clock-distribution and routing assemblies in communication systems. Rather than acting as a general-purpose clock buffer, the IC provides the broader AnyRate MUX/DEMUX function, allowing clock and associated serial paths to be routed according to system control signals. Differential signaling helps maintain signal integrity when the device is operated up to 2.7 GHz, and synchronous frame-boundary indication can support coherent system timing. PCB implementation should use short symmetric routes, solid ground references, and the manufacturer's recommended power and exposed-pad connection arrangement.

🖥️

Communication Test Equipment

The SY87724LHI can support communication test equipment that switches or combines differential high-speed signals while preserving the tested protocol. Operation up to 2.7 GHz supports test paths for high-speed serial links, and the two-channel MUX/DEMUX architecture allows signal paths to be selected under programmable control. The protocol-transparent behavior avoids modifying the payload being measured, while frame-boundary indication supports timing-aware test sequences. Engineers should characterize insertion loss and channel-to-channel skew in the assembled fixture, particularly when long cables or adapters add reflections beyond the controlled PCB environment.

What is the SY87724LHI?
The SY87724LHI is a 3.3 V AnyRate MUX/DEMUX interface IC designed for protocol-transparent multiplexing and demultiplexing up to 2.7 GHz. According to the Micrel Semiconductor datasheet, it supports two channels, differential clock and serial input/output paths, programmable or 10-bit parallel control, and synchronous frame-boundary indication. The device is packaged in an 80-lead TQFP with an exposed pad for PCB heat dissipation.
What is the operating frequency of SY87724LHI?
The SY87724LHI supports operation up to 2.7 GHz. The Micrel Semiconductor datasheet identifies the device as a 3.3 V AnyRate MUX/DEMUX and specifies protocol-transparent multiplexing and demultiplexing at that frequency. This makes it applicable to high-speed communication routing rather than conventional low-frequency logic multiplexing, so PCB signal-integrity and controlled-impedance design remain important.
What package does SY87724LHI use?
The SY87724LHI uses an 80-lead TQFP package with an exposed pad and a 14 mm by 14 mm body. The DigiKey product listing describes the package as 80-EPAD-TQFP (14x14), while the manufacturer datasheet documents the exposed-pad land pattern and thermal requirements. The exposed pad should be connected according to the datasheet and supplied with thermal vias for effective heat transfer.
Where can I download the SY87724LHI datasheet PDF?
The SY87724LHI datasheet PDF can be downloaded from the Microchip-hosted copy at https://www.lcsc.com/datasheet/C19478078.pdf. The document is the 14-page Micrel Semiconductor datasheet for the 3.3 V AnyRate MUX/DEMUX up to 2.7 GHz. Use its pin-description table, electrical characteristics, application circuit, and exposed-pad layout information when assigning the 80-pin footprint.
Where can I find the SY87724LHI pinout?
The SY87724LHI pinout is shown in the manufacturer datasheet at https://www.lcsc.com/datasheet/C19478078.pdf. The pin-description table and package drawing should be used to map supply, ground, differential clock, serial data, control, and frame-boundary functions. Do not infer an exposed-pad connection solely from generic TQFP conventions; use the device-specific drawing when making the PCB land pattern.
Is the SY87724LHI protocol transparent?
Yes, the SY87724LHI supports protocol-transparent MUX/DEMUX operation. According to the Micrel Semiconductor datasheet, the device routes high-speed signals without requiring the payload to be interpreted or reformatted, and it can be controlled by framer logic. This allows it to operate with established transport protocols while providing programmable or 10-bit parallel configuration.
What interfaces does the SY87724LHI provide?
The SY87724LHI provides differential clock and differential serial input/output interfaces together with programmable or 10-bit parallel control. The Micrel Semiconductor datasheet also identifies framer-logic control and synchronous frame-boundary indication. These features allow the multiplexing and demultiplexing functions to be coordinated with the timing and framing behavior of surrounding communication equipment.
What can replace the SY87724LHI?
The closest identified same-family replacement is the Microchip Technology SY87724LHY, which appears in a direct comparison with the SY87724LHI. A drop-in decision should still confirm that the replacement uses the same 80-lead TQFP exposed-pad land pattern, preserves the differential clock and serial pin assignments, and meets the required frequency and temperature limits. Use the manufacturer pin and electrical tables before approving a substitution.
Is SY87724LHI the same as SY87724LHY?
The SY87724LHI and SY87724LHY are closely related members of the SY87724 device family, but they should not be treated as automatically identical without checking their ordering suffixes. The documented target provides a 3.3 V, 2.7 GHz, 2-channel AnyRate MUX/DEMUX in an 80-lead TQFP exposed-pad package. Verify the suffix-specific temperature, qualification, lifecycle, and marking requirements before substitution.
When should I choose the SY87724LHI over another interface multiplexer?
Choose the SY87724LHI when a board requires a 3.3 V, protocol-transparent multiplexer or demultiplexer with operation up to 2.7 GHz, two channels, differential clock and data paths, and an 80-lead TQFP exposed-pad footprint. It is a specialized high-speed routing device rather than a general-purpose logic mux. Select another device only when its electrical limits, pin assignment, control protocol, package, and thermal requirements are demonstrably equivalent.
SY87724LHI vs SY87724LHY — which is better for a high-speed network board?
The SY87724LHI is the documented choice when its 3.3 V supply, 2.7 GHz maximum operating frequency, two-channel configuration, differential interfaces, and 80-lead TQFP exposed-pad package match the design. The SY87724LHY is a close family candidate, but suffix-specific temperature and qualification requirements determine the better choice. Confirm those requirements against the manufacturer datasheet before PCB release.
Is the SY87724LHI suitable for a 2.7 GHz communication link?
The SY87724LHI is rated for AnyRate MUX/DEMUX operation up to 2.7 GHz, making it suitable in principle for a link operating at or below that limit. Suitability also depends on preserving the differential clock and serial lane topology, meeting the device's power and ground requirements, and controlling PCB impedance and loss. Operating exactly at 2.7 GHz requires careful validation of the complete interconnect rather than reliance on the IC rating alone.
Does SY87724LHI need a heatsink?
The SY87724LHI exposes its thermal pad through the 80-lead TQFP package, and the manufacturer documentation provides the required exposed-pad land pattern and thermal information. Use that pad as the primary heat-transfer path and add thermal vias as directed by the layout guidance. A separate heatsink is generally not the first design choice, but final thermal requirements must be calculated from actual dissipation, ambient temperature, copper area, and the package thermal data.
Where can I buy SY87724LHI and check current availability?
Use the Request a Quote form on this page to request current SY87724LHI availability, minimum order quantity, lead time, and project pricing for the exact 80-lead TQFP exposed-pad ordering code. The current commercial status and quantity breaks should be confirmed for the requested volume and delivery schedule before placing a production order, especially for a legacy AnyRate interface IC.
What is the price of SY87724LHI?
Current pricing for the SY87724LHI depends on order quantity, packaging condition, and delivery schedule. Submit the exact MPN and required quantity through the Request a Quote form on this page so the quote can reflect current sourcing terms. Before requesting a quote, verify that the quoted line references SY87724LHI in the 80-lead TQFP exposed-pad package rather than a different package or suffix.
What is the lead time for SY87724LHI?
The current lead time for SY87724LHI should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, and acceptable manufacturing or inspection condition. Because the exact suffix includes the 80-lead TQFP exposed-pad configuration, the sourcing response should be tied to the complete SY87724LHI ordering code to avoid confusion with related SY87724 variants.

Dados de referência de engenharia para SY87724LHI — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the SY87724LHI when the design requires a 3.3 V, protocol-transparent AnyRate MUX/DEMUX operating up to 2.7 GHz in an 80-lead TQFP exposed-pad package. Its two-channel architecture, differential clock and serial interfaces, programmable or 10-bit parallel control, and frame-boundary indication suit communication modules, line cards, framer assemblies, and test equipment. The SY87724LHY is the closest identified family alternative and may be preferable when its suffix-specific temperature or qualification requirements better match the application. Neither part should be treated as a generic logic-mux substitute because its differential high-speed routing and exposed-pad thermal requirements define the PCB implementation. Before replacement, compare the complete pin-description tables, electrical characteristics, operating-temperature limits, lifecycle status, and exposed-pad land pattern.

Comparação com alternativas

Parâmetro Este produto SY87724LHY
Package 80-lead TQFP with exposed pad, 14 mm x 14 mm 80-lead TQFP with exposed pad, 14 mm x 14 mm
Brand Microchip Technology Microchip Technology
Product Type AnyRate MUX/DEMUX interface IC AnyRate MUX/DEMUX interface IC
Supply Voltage 3.3 V 3.3 V
Maximum Operating Frequency 2.7 GHz 2.7 GHz
Channel Count 2 channels 2 channels
MUX/DEMUX Configuration 3 x 1 3 x 1
Interface Configuration Programmable or 10-bit parallel interface Programmable or 10-bit parallel interface
Signal Type Differential clock and serial input/output Differential clock and serial input/output

Principais diferenciais

  • High-speed protocol-transparent multiplexing (vs SY87724LHY)
  • Two-channel differential routing (vs SY87724LHY)
  • Integrated framing coordination (vs SY87724LHY)

Notas de projeto

Use the manufacturer exposed-pad drawing as the authority for the 80-lead TQFP footprint. Place thermal vias beneath the exposed pad, preserve the specified via diameter and antipad clearance, and connect the pad to the recommended supply or ground net. Confirm the land pattern against the final PCB fabrication rules because package drawings can use dimensions that differ between CAD libraries.

Route the differential clock and serial signals as short, symmetric pairs with continuous reference planes and no unnecessary stubs. Apply the impedance target established by the complete board stack-up, and keep the IC, drivers, receivers, and decoupling close to their respective pins. At operation near 2.7 GHz, connector launches, layer transitions, and return-path discontinuities can degrade performance even when the IC itself is operated within its rated limits.

Assign the power and ground pins directly from the manufacturer pin-description table and use the recommended local bypass network with short ground returns. Place high-frequency decoupling immediately adjacent to the relevant supply pins rather than at a distant regulator output. Validate the rail for voltage tolerance, ripple, and simultaneous switching activity using the operating load condition rather than a no-load bench supply.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact SY87724LHI ordering code.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SY87724LHI datasheet SY87724LHI datasheet pdf SY87724LHI pinout SY87724LHI specifications SY87724LHI 80 TQFP pinout SY87724LHI 2.7GHz mux demux SY87724LHI equivalent SY87724LHI replacement SY87724LHI vs SY87724LHY SY87724LHI price SY87724LHI stock Microchip SY87724LHI SY87724LHI network interface SY87724LHI exposed pad footprint What is the SY87724LHI?

Componentes & termos relacionados

Microchip Technology Micrel Semiconductor SY87724LHI SY87724LHY AnyRate MUX/DEMUX multiplexer demultiplexer interface IC semiconductor 3.3 V 2.7 GHz 2 channels 3 x 1 configuration protocol-transparent operation 10-bit parallel interface differential clock differential serial I/O synchronous frame-boundary indication HSPC 80-lead TQFP TQFP family exposed thermal pad surface mount framer logic controlled impedance networking switch IC
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ