SY87724LHI - 2.7GHz AnyRate MUX/DEMUX | Microchip Technology
料号: SY87724LHI ✓ 量产中SY87724LHI 概述
An AnyRate MUX/DEMUX is a signal-routing interface that can place multiple communication channels onto a shared physical interface. The MUX function combines parallel or serial data sources, while the DEMUX function separates a shared input into individual outputs. A protocol-transparent device does not interpret or modify the transported payload, allowing existing framing, encoding, and signaling systems to operate without changing their data format.
The SY87724LHI supports protocol-transparent MUX/DEMUX operation up to 2.7 GHz and includes programmable or 10-bit parallel interfaces. Differential clock and serial input/output capabilities support high-speed point-to-point links, while control by framer logic permits the device to follow the timing boundaries established by surrounding network equipment. Synchronous frame-boundary indication helps downstream circuitry determine valid data intervals.
The device uses differential signaling for clock and data paths, which supports the controlled impedance and noise-management practices commonly required in high-speed PCB layouts. Its AnyRate architecture is particularly useful where several physical lanes must be consolidated before transmission or distributed after reception. The 3.3 V supply operation also allows integration with communication ICs operating in conventional 3.3 V signal environments.
Typical applications include network interface equipment, telecommunications line cards, framer and backplane systems, serial links, clock-distribution networks, and data-routing assemblies. The SY87724LHI can also support test equipment when several high-speed signals must be selected without changing the underlying protocol. The exposed thermal pad assists heat transfer from the device to the PCB during operation.
PCB implementation requires careful treatment of the 80-TQFP footprint, including thermal-via placement beneath the exposed pad and controlled-impedance routing for differential clock and serial signals. The input, output, power, and ground connections should be assigned directly from the manufacturer pin-description table and pinout diagram. Because this device operates above 2 GHz, component placement, return paths, connector transitions, and via stubs can materially affect signal integrity.
This product page organizes the SY87724LHI specifications, interface roles, package information, sourcing workflow, and design considerations into one engineering reference. It also distinguishes verified device characteristics from specifications that require confirmation, helping designers evaluate the IC before assigning its 80-pin footprint and high-speed differential interfaces to a communication board.
直接替换替代料: SY87724LHI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: SY87724LHI (相同外形与封装尺寸) ——差异在于 Control Interface, Package, Product Type.
SY87724LHY
✅ 直接替换联系询价
查看数据手册 →SY87724LHI 规格参数
| Product Type | AnyRate MUX/DEMUX interface IC |
| 电源电压 | 3.3 V |
| Maximum Operating Frequency | 2.7 GHz |
| Channel Count | 2 channels |
| MUX/DEMUX Configuration | 3 x 1 |
| 接口类型 | Protocol-transparent MUX/DEMUX |
| Control Interface | Programmable or 10-bit parallel interface |
| Clock Interface | Differential clock input/output |
| Data Interface | Differential serial input/output |
| Frame Synchronization | Synchronous frame-boundary indication |
| High-Speed Processing | HSPC |
| 封装 | 80-lead TQFP with exposed pad, 14 mm x 14 mm |
| 安装类型 | Surface mount |
| 工作温度 | -40 °C to 85 °C |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
SY87724LHI 80-lead tqfp with exposed pad, 14 mm x 14 mm 引脚配置指南
SY87724LHI(80-lead tqfp with exposed pad, 14 mm x 14 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY87724LHI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY87724LHI 适用于 6 应用s: Network Interface Equipment, Telecommunications Line Cards, Framer and Backplane Routing, High-Speed Serial Link Aggregation, Clock Distribution Networks, Communication Test Equipment.
Network Interface Equipment
The SY87724LHI fits network-interface equipment that must route high-speed differential paths while preserving the underlying transport protocol. Its 3.3 V operation, two-channel configuration, and support for operation up to 2.7 GHz make it suitable for consolidating or separating signals within a communication module. The programmable or 10-bit parallel control allows the routing function to be coordinated with framer logic, while synchronous frame-boundary indication helps receivers identify valid data intervals. A board designer should preserve the differential clock and serial topology and use controlled-impedance routing to realize the device's frequency capability.
推荐
Telecommunications Line Cards
The SY87724LHI is appropriate for telecommunications line-card signal routing where multiple high-speed channels must be multiplexed onto or demultiplexed from a shared interface. Protocol-transparent operation up to 2.7 GHz lets the device work alongside existing framing and transport logic without changing the payload format. Differential clock and serial inputs and outputs support controlled-impedance PCB environments, while framer-logic control supports coordinated switching at frame boundaries. The 80-lead TQFP exposed pad also provides a defined thermal path for sustained operation in compact communication equipment.
推荐
Framer and Backplane Routing
The SY87724LHI can support framer and backplane assemblies that require deterministic selection of high-speed serial paths. Its 2.7 GHz maximum operating frequency provides headroom for communication links operating below that limit, while differential clock and data interfaces align with current serial-routing practices. Synchronous frame-boundary indication gives downstream logic a timing reference, and programmable or 10-bit parallel control permits integration with line-card management logic. Placement and return-path planning remain critical because the 80-lead TQFP exposes many routing and power connections in a compact 14 mm by 14 mm footprint.
推荐
High-Speed Serial Link Aggregation
The SY87724LHI is suitable for serial-link aggregation tasks where data paths must be selected, combined, or separated without decoding the transported protocol. Two channels and operation up to 2.7 GHz support high-speed communication assemblies, while differential clock and serial signaling improve signal-integrity control on properly designed boards. The device can be directed by surrounding framer logic and can report synchronous frame boundaries. For production designs, validate insertion loss, return loss, skew, and impedance across the complete path because the IC specification alone cannot compensate for an unsuitable PCB or connector transition.
推荐
Clock Distribution Networks
The SY87724LHI's differential clock paths make it applicable to clock-distribution and routing assemblies in communication systems. Rather than acting as a general-purpose clock buffer, the IC provides the broader AnyRate MUX/DEMUX function, allowing clock and associated serial paths to be routed according to system control signals. Differential signaling helps maintain signal integrity when the device is operated up to 2.7 GHz, and synchronous frame-boundary indication can support coherent system timing. PCB implementation should use short symmetric routes, solid ground references, and the manufacturer's recommended power and exposed-pad connection arrangement.
推荐
Communication Test Equipment
The SY87724LHI can support communication test equipment that switches or combines differential high-speed signals while preserving the tested protocol. Operation up to 2.7 GHz supports test paths for high-speed serial links, and the two-channel MUX/DEMUX architecture allows signal paths to be selected under programmable control. The protocol-transparent behavior avoids modifying the payload being measured, while frame-boundary indication supports timing-aware test sequences. Engineers should characterize insertion loss and channel-to-channel skew in the assembled fixture, particularly when long cables or adapters add reflections beyond the controlled PCB environment.
推荐
推荐产品汇总
工程参考数据: SY87724LHI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY87724LHY |
|---|---|---|
| Package | 80-lead TQFP with exposed pad, 14 mm x 14 mm | 80-lead TQFP with exposed pad, 14 mm x 14 mm |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | AnyRate MUX/DEMUX interface IC | AnyRate MUX/DEMUX interface IC |
| Supply Voltage | 3.3 V | 3.3 V |
| Maximum Operating Frequency | 2.7 GHz | 2.7 GHz |
| Channel Count | 2 channels | 2 channels |
| MUX/DEMUX Configuration | 3 x 1 | 3 x 1 |
| Interface Configuration | Programmable or 10-bit parallel interface | Programmable or 10-bit parallel interface |
| Signal Type | Differential clock and serial input/output | Differential clock and serial input/output |
关键差异点
- High-speed protocol-transparent multiplexing (对比 SY87724LHY)
- Two-channel differential routing (对比 SY87724LHY)
- Integrated framing coordination (对比 SY87724LHY)
设计说明
Use the manufacturer exposed-pad drawing as the authority for the 80-lead TQFP footprint. Place thermal vias beneath the exposed pad, preserve the specified via diameter and antipad clearance, and connect the pad to the recommended supply or ground net. Confirm the land pattern against the final PCB fabrication rules because package drawings can use dimensions that differ between CAD libraries.
Route the differential clock and serial signals as short, symmetric pairs with continuous reference planes and no unnecessary stubs. Apply the impedance target established by the complete board stack-up, and keep the IC, drivers, receivers, and decoupling close to their respective pins. At operation near 2.7 GHz, connector launches, layer transitions, and return-path discontinuities can degrade performance even when the IC itself is operated within its rated limits.
Assign the power and ground pins directly from the manufacturer pin-description table and use the recommended local bypass network with short ground returns. Place high-frequency decoupling immediately adjacent to the relevant supply pins rather than at a distant regulator output. Validate the rail for voltage tolerance, ripple, and simultaneous switching activity using the operating load condition rather than a no-load bench supply.
合规信息
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact SY87724LHI ordering code.