Microchip Technology

SY88813VKC - 155Mbps PECL Postamplifier | Microchip

N.º da peça: SY88813VKC ✓ Ativo
3.3 V or 5 V Vdss 10-MSOP Package
MOQ: 1 |

SY88813VKC Visão geral

The Microchip Technology SY88813VKC is a 155 Mbps PECL low-power limiting postamplifier with signal detect, supplied in a 10-pin MSOP package. It accepts 3.3 V or 5 V operation and is designed for optical-network receiver paths where a high-speed differential signal must be amplified and limited before being returned to a line card or clock-recovery circuit.

A limiting postamplifier is a specialized amplifier within the optical communication IC hierarchy. Its primary role is to amplify a small received signal, restore it to a stable digital logic level, and provide a signal-presence indication through the signal-detect function. It sits between the optical receiver or photodiode circuitry and the subsequent digital processing stage, converting a noisy high-frequency analog waveform into a usable PECL output.

The manufacturer describes the SY88813 as a low-power 3.3 V/5 V, 155 Mbps PECL limiting postamplifier. Its principal application is optical networking, where consistent signal detection, compact implementation, and high operating speed are essential. The 10-MSOP package supports surface-mount assembly while keeping the circuit footprint compact enough for communications equipment with dense board layouts.

The SY88813VKC architecture combines signal amplification, limiting, and detection in one device. Limiting is particularly useful in receiver chains because it converts amplitude variations into a controlled digital output, while signal detect provides a hardware indication that the received signal is present. These functions reduce the number of separate operations required immediately after the optical front end.

Typical implementations include SONET or related optical-network receiver cards, 155 Mbps line interfaces, clock-recovery paths, and telecommunications equipment operating from 3.3 V or 5 V supplies. The device is best suited to designs where a compact PECL postamplifier and signal-detect function are needed close to the receiver front end.

PCB implementation should prioritize short high-speed traces, controlled impedance, adequate bypassing, and a solid ground reference. The power and ground connections must follow the manufacturer’s recommended decoupling arrangement, and unused or conditionally used pins should be connected exactly as directed in the pin-description table. Signal routing should minimize discontinuities because the amplifier is intended for data rates up to 155 Mbps.

This page organizes the device identity, verified catalog information, package characteristics, technical alternatives, and application guidance into one engineering reference. It also distinguishes confirmed electrical facts from parameters that require confirmation in the manufacturer datasheet before schematic release or production design.

Alternativas drop-in para SY88813VKC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com SY88813VKC (mesmo formato e footprint) — diferindo em Maximum Data Rate.

Microchip Technology
Maximum Data Rate: 155Mbps
Comparar com SY88813VKC →

SY88813VKC-TR

✅ Drop-In
📦 10-MSOP
Same 155 Mbps device function and 10-MSOP footprint; ordering suffix changes the shipping format by 0 electrical-performance percentage points.

📋 Alternativa de referência (fora do catálogo)

SY88813VKG

✅ Drop-In
Microchip Technology
📦 10-MSOP
Limiting post amplifier · PECL · 3.3V to 5V · 155Mbps · 1 · 10-MSOP / 10-TFSOP · 3.00mm · 0.118 inch

Consulte o preço

Ver ficha técnica →

SY88813VKC Classificações máximas e características elétricas

Product Type Limiting postamplifier IC
Maximum Data Rate 155 Mbps
Supply Voltage Options 3.3 V or 5 V
Output Logic Standard PECL
Signal Detect PECL signal detect
Primary Application Optical networks
Package Type 10-MSOP
Package Dimensions 3.00 mm width
Tipo de montagem Surface mount
Packaging Tube

Guia de Configuração de Pinos do SY88813VKC 3.00 mm width

Configuração de pinos para SY88813VKC (pacote 3.00 mm width). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 3.00 mm width para SY88813VKC

Nenhum dado detalhado de pinagem disponível para SY88813VKC.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SY88813VKC é adequado para 6 aplicaçãos: 155 Mbps Optical Receiver, Telecom Line Card, PECL Clock Recovery Path, Optical Network Monitoring, High-Speed Data Interface Conditioning, Optical Receiver Test Fixture.

🌐

155 Mbps Optical Receiver

The SY88813VKC fits the receiver chain of a 155 Mbps optical-network interface because it combines low-power limiting amplification with PECL signal detect in a 10-MSOP package. The amplifier can sit after the photodetector and receiver front end, where a small differential waveform must be restored to a stable logic level. Its confirmed 3.3 V or 5 V operation supports conventional telecommunications infrastructure, while the 155 Mbps rating matches the target line rate. Signal detect gives the host circuitry an indication that a valid received signal is present. Board design should preserve controlled impedance and place bypass capacitors close to the supply pins.

🏭

Telecom Line Card

A telecom line card can use the SY88813VKC to condition signals arriving from an optical transceiver or receiver module. The 155 Mbps limiting-postamplifier function is appropriate for legacy and installed 155 Mbps transport interfaces, while PECL output supports direct connection to compatible digital logic stages. Its compact 10-MSOP footprint reduces board area compared with a multi-chip limiter and detector implementation. The designer should confirm input common-mode limits, supply current, propagation delay, and signal-detect timing from the manufacturer datasheet before assigning surrounding components and trace lengths.

⚡

PECL Clock Recovery Path

The SY88813VKC can provide signal conditioning ahead of clock-recovery circuitry in a 155 Mbps communication system. Limiting converts amplitude variation into a consistent digital waveform, which is useful when the input originates in an optical receiver or a long high-speed interconnect. The integrated PECL signal-detect output can also support loss-of-signal supervision upstream of the recovery block. Because the device operates at rates up to 155 Mbps, layout should use short traces, a continuous return path, and nearby supply bypassing. Confirm the intended topology and interface voltage in the receiver design before layout release.

🖥️

Optical Network Monitoring

The SY88813VKC is suitable for monitoring a 155 Mbps optical receive path because its PECL signal-detect function reports signal presence while the limiting stage conditions the associated data. A line-card controller can use this indication for link supervision, fault isolation, or alarm processing. The integrated function avoids implementing a separate threshold detector close to the receiver front end. For dependable monitoring, keep the input connection controlled and follow the recommended decoupling arrangement. The signal-detect threshold and response time must be taken directly from the Micrel manufacturer datasheet because those values were not established by the product listing.

🔧

High-Speed Data Interface Conditioning

The SY88813VKC can condition a 155 Mbps differential signal in equipment that uses PECL interface levels. Its limiting action provides a stable output amplitude, and the 10-MSOP package permits placement close to the source and destination devices. This makes the part relevant to legacy networking, telecommunications, and test-equipment signal chains where an active limiter is preferable to relying on passive termination alone. Engineering review should verify differential input polarity, output logic levels, operating supply, and timing margins for the specific channel. High-speed routing must avoid long stubs and split supply-return paths.

📡

Optical Receiver Test Fixture

A laboratory fixture for exercising 155 Mbps PECL receiver paths can use the SY88813VKC as the limiting and signal-detection element. The component provides a repeatable way to observe whether an incoming high-speed signal is present while presenting a controlled PECL output to the fixture under test. Its 3.3 V or 5 V flexibility allows use with both legacy and lower-voltage test interfaces. The compact 10-MSOP package simplifies adapter-board construction around the source equipment. Designers should use controlled-impedance coaxial or board traces, provide local bypass capacitance, and consult the manufacturer pin-description table to avoid incorrect differential or signal-detect connections.

What is the SY88813VKC used for?
The SY88813VKC is a 155 Mbps PECL low-power limiting postamplifier used primarily in optical-network receiver circuits. According to the Micrel manufacturer datasheet, it combines input amplification, output limiting, and PECL signal detect in a 10-MSOP package. It is suitable where a recovered high-speed signal must be converted into a stable logic-level output and where the receiver also requires a hardware signal-presence indication.
What is the operating voltage of SY88813VKC?
The SY88813VKC operates from either 3.3 V or 5 V. The Micrel manufacturer datasheet identifies the device as a 3.3 V/5 V, 155 Mbps PECL limiting postamplifier. This dual-supply description supports both conventional 5 V telecommunications circuitry and lower-voltage systems, although the selected rail must also satisfy the input-output levels required by the surrounding PECL interface.
What is the maximum data rate of SY88813VKC?
The SY88813VKC supports data rates up to 155 Mbps. This figure is stated in the Micrel manufacturer datasheet description for the device as a low-power PECL limiting postamplifier. The rate is a key selection criterion because the limiting behavior, signal-detect response, and external implementation must remain appropriate for the optical receiver and clock-recovery path in which the amplifier is installed.
Where can I download the SY88813VKC datasheet PDF?
The SY88813VKC datasheet PDF can be reached through the linked manufacturer-document listing, which identifies the part as a 3.3 V/5 V, 155 Mbps PECL low-power limiting postamplifier with PECL signal detect. Use the pin-description and electrical-characteristics tables when assigning pins, checking supply current, setting input common-mode limits, and confirming the operating temperature range.
Where can I find the SY88813VKC pinout?
The SY88813VKC pinout is defined in the pin-description table of the Micrel manufacturer datasheet. The device uses a 10-MSOP package, but the package outline alone does not identify every electrical function. Review the datasheet diagram before assigning power, ground, differential inputs, differential outputs, and the PECL signal-detect output because incorrect pin connections can prevent normal receiver operation.
Is SY88813VKC suitable for optical network receivers?
Yes, the SY88813VKC is explicitly intended for optical networks. The Micrel manufacturer datasheet describes it as a 155 Mbps PECL limiting postamplifier, and the product listing likewise identifies optical networks as the primary application. Its limiting and signal-detect functions make it appropriate for the receiver chain following an optical front end, especially in 155 Mbps telecommunications equipment.
What is the difference between SY88813VKC and SY88813VKC-TR?
SY88813VKC and SY88813VKC-TR identify the same 155 Mbps, 10-MSOP limiting-postamplifier function, with the main distinction being the order suffix and associated packaging configuration. The verified catalog information identifies the base part in tube packaging and the -TR version in the tape-and-reel ordering code. Both are listed as Microchip Technology 10-MSOP limiting postamplifiers for optical networks.
Can SY88813VKG replace SY88813VKC?
SY88813VKG may serve as a related-family candidate, but it should not be treated as an unconditional drop-in replacement. The cross-reference information describes similar functions while warning that principal parameters are inconsistent and the circuit structure can differ. Confirm the complete pin description, supply levels, signal-detect behavior, and timing specifications in the manufacturer datasheet before substituting it into an existing 10-MSOP layout.
What can replace SY88813VKC?
SY88813VKC-TR is the closest cataloged same-device option because it retains the SY88813 function, 155 Mbps rating, 10-MSOP package, and optical-network application. SY88813VKG is another related family member, although its cross-reference record indicates possible parameter and circuit-structure differences. Confirm ordering code, pin assignments, and electrical characteristics on the manufacturer datasheet before approving either substitution.
When should I choose SY88813VKC instead of a generic limiting amplifier?
Choose SY88813VKC when the receiver path needs a dedicated 155 Mbps PECL postamplifier with integrated signal detect rather than a general-purpose amplifier. The Micrel manufacturer datasheet identifies a 3.3 V/5 V low-power design for optical networks. Selection is strongest when the existing board already uses the 10-MSOP footprint and when its pin functions and signal levels match the SY88813 interface requirements.
What are the key specifications engineers should know about SY88813VKC?
The key confirmed specifications are a maximum data rate of 155 Mbps, support for 3.3 V or 5 V operation, PECL outputs, PECL signal detect, and a 10-MSOP surface-mount package. The Micrel manufacturer datasheet also describes it as a low-power limiting postamplifier for optical networks. Supply current, propagation delay, input common-mode range, and temperature limits should be confirmed from the electrical tables before final design approval.
Does SY88813VKC require a separate signal-detect circuit?
The SY88813VKC integrates a PECL signal-detect function into the limiting postamplifier. According to the Micrel manufacturer datasheet description, the device is a limiting postamplifier with PECL signal detect. This allows the receiver subsystem to obtain a signal-presence indication directly from the device, although the exact detection threshold and timing must be taken from the electrical-characteristics tables.
Where can I buy SY88813VKC online?
Use the Request a Quote form on this page to request SY88813VKC pricing, availability, lead time, and the correct order quantity. The part is identified as a Microchip Technology 10-MSOP limiting postamplifier for optical networks. When requesting a quotation, confirm whether the tube-packaged base ordering code is acceptable or whether a tape-and-reel order code is required for your assembly process.
What is the lead time and stock status for SY88813VKC?
Request current stock, minimum order quantity, lead time, and production allocation through the Request a Quote form on this page. The catalog identifies SY88813VKC as a 10-MSOP tube-packaged limiting postamplifier, while SY88813VKC-TR provides a distinct order code for tape-and-reel assembly. Current fulfillment timing can change, so it should be confirmed for the selected suffix and quantity.
Is SY88813VKC RoHS compliant and automotive qualified?
The RoHS and AEC-Q100 status of SY88813VKC must be confirmed before it is released into a regulated production design. The product identity and application are clearly defined as a 155 Mbps PECL limiting postamplifier in a 10-MSOP package, but the catalog excerpt does not establish automotive qualification or material-compliance declarations. Request the current manufacturer compliance documentation for the exact ordering code.

Dados de referência de engenharia para SY88813VKC — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose SY88813VKC for a 155 Mbps optical-receiver path that needs a compact 3.3 V or 5 V PECL limiting amplifier with integrated signal detect and a 10-MSOP footprint. SY88813VKC-TR is the practical selection when the same electrical device is required in a tape-and-reel production format rather than a tube. Consider SY88813VKG only after checking its pin assignments and electrical tables because related-family information indicates that some parameters and circuit details may differ. For new designs, prioritize the base part when the assembly method accepts tube packaging and when its documented operating behavior matches the receiver. Avoid choosing by package outline alone: signal-detect polarity, differential routing, input common-mode range, propagation delay, and supply requirements must be confirmed before any substitution is approved.

Comparação com alternativas

Parâmetro Este produto SY88813VKC-TR SY88813VKG
Brand Microchip Technology Microchip Technology Microchip Technology
Package 10-MSOP 10-MSOP - same 10-MSOP - same
Product Type Limiting postamplifier IC Limiting postamplifier IC PECL postamplifier
Maximum Data Rate 155 Mbps 155 Mbps 155 Mbps
Supply Voltage 3.3 V or 5 V 3.3 V or 5 V 3.3 V or 5 V
Output Logic PECL PECL PECL

Principais diferenciais

  • Integrated optical-receiver conditioning (vs SY88813VKG)
  • Direct 155 Mbps receiver-path function (vs SY88813VKC-TR)
  • Dual 3.3 V and 5 V supply compatibility (vs SY88813VKG)

Notas de projeto

Place the input, output, power, and ground connections according to the manufacturer pin-description and layout guidance. The 10-MSOP footprint is compact, so route the high-speed differential paths as short and symmetric as practical, avoid unnecessary stubs, and maintain a continuous ground reference beneath the device. Verify footprint dimensions and pin numbering against the package drawing before releasing artwork.

Decouple the 3.3 V or 5 V supply close to the device with the capacitance and connection arrangement specified by the Micrel manufacturer datasheet. Keep the decoupling path short and connect it to the same low-impedance ground reference used by the device. A wide supply trace helps reduce voltage droop, while minimizing loop area lowers susceptibility to conversion noise and high-speed transient coupling.

Preserve controlled impedance and adequate return paths for the 155 Mbps differential interface. Avoid routing across plane splits, supplying long test pads on the high-speed nodes, and leaving unmatched stubs in production designs. Validate amplitude, edge rate, jitter, and signal-detect behavior with the actual receiver source and interconnect because the limiter removes amplitude variation but does not correct a poor channel.

Do not substitute SY88813VKC solely because another ordering code uses the same 10-MSOP outline. Confirm differential input polarity, supply sequencing, signal-detect implementation, output levels, and timing from the manufacturer datasheet. Also distinguish the tube-packaged base ordering code from the tape-and-reel ordering code so that the assembly method and incoming inspection plan match the production line.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The catalog material identifies the device as a Microchip Technology limiting postamplifier for optical networks but does not establish material-compliance or automotive-qualification declarations for the exact order code.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SY88813VKC datasheet SY88813VKC specifications SY88813VKC pinout SY88813VKC datasheet pdf SY88813VKC equivalent SY88813VKC replacement SY88813VKC cross reference SY88813VKC vs SY88813VKG SY88813VKC 155Mbps SY88813VKC 10-MSOP SY88813VKC optical networks SY88813VKC price SY88813VKC stock Microchip SY88813VKC SY88813VKC PECL postamplifier

Componentes & termos relacionados

Microchip Technology Micrel Semiconductor SY88813VKC SY88813VKC-TR SY88813VKG limiting postamplifier special-purpose amplifier amplifier IC integrated circuit semiconductor PECL signal detect 155 Mbps 3.3 V 5 V optical networks 10-MSOP MSOP package family surface-mount package 155 Mbps optical receiver clock recovery line card signal conditioning
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ