Microchip Technology

SY88923VKG - 2.5Gbps Dual PECL Limiting Post Amp | Microchip

N.º da peça: SY88923VKG ✓ Ativo
3.3 V Vdss 10-MSOP Package
MOQ: 1 |

SY88923VKG Visão geral

The Microchip Technology SY88923VKG is a dual PECL limiting post amplifier designed for high-speed digital signal conditioning, with a listed operating supply range of 3.3V to 5V and a data rate of up to 2.5 Gbps. The device is supplied in a 10-lead MSOP package, identified in the product information as 10-MSOP or 10-TFSOP with a 0.118-inch, 3.00 mm body width. Its limiting-amplifier architecture supports digital communication links where a regenerated, logic-compatible output is useful after transmission through a lossy channel.

A limiting post amplifier is a specialized amplifier IC within the broader signal-conditioning hierarchy. It receives a high-speed digital waveform, amplifies the signal to a usable level, and limits the output into a defined logic state. The SY88923VKG is associated with positive emitter-coupled logic, commonly abbreviated PECL, and is listed as a limiting amplifier. Its combination of a 2.5 Gbps rated data rate and a dual-function configuration makes it relevant to parallel high-speed links, clock distribution, serializers, and communications equipment.

The principal listed specifications establish the part's operating envelope. The supported 3.3V-to-5V supply range allows the amplifier to operate from common low-voltage digital rails. The 2.5 Gbps rating identifies the maximum listed signal rate, while the dual description indicates two amplifier functions in one package. The MSOP-10 format provides a compact surface-mount solution for space-constrained designs. Additional operating details such as rise time, input sensitivity, output amplitude, jitter, current consumption, and temperature range must be confirmed from the manufacturer datasheet before production release.

The product belongs to the amplifier IC category and is specifically positioned as a limiting amplifier rather than a general-purpose analog amplifier. This distinction is important because the useful design criteria include digital threshold behavior, data-rate capability, logic compatibility, propagation delay, and deterministic output levels. Designers should also account for transmission-line impedance, input and output termination, supply decoupling, and the timing relationship between complementary data channels.

Typical uses include recovering and regenerating high-speed digital signals in telecommunications equipment, peripheral interfaces, clock or data distribution networks, and backplane links. The dual architecture may reduce component count when two independent channels require the same limiting function. The 10-MSOP package is also convenient for compact industrial or communications modules where a larger quad-device package would be unnecessary.

Circuit implementation requires care at the board level. PECL interfaces commonly use controlled-impedance traces and appropriate bias or termination networks, but the exact network must follow the device's application circuit and logic interface. Place bypass capacitors close to the supply pins, provide a continuous return path, avoid stubs on high-speed traces, and verify channel-to-channel skew against the receiving device's setup and hold requirements.

This product record combines the identified electrical envelope, package information, sourcing details, and practical implementation guidance. It also distinguishes verified drop-in alternatives from merely related devices, helping engineers assess replacement options without assuming that a shared package alone guarantees equivalent data rate, logic levels, timing, or pin behavior.

Alternativas drop-in para SY88923VKG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

SY88923VKG Classificações máximas e características elétricas

Device Type Dual limiting post amplifier
Logic Family PECL
Maximum Data Rate 2.5 Gbps
Minimum Supply Voltage 3.3 V
Maximum Supply Voltage 5 V
Number of Amplifier Functions 2 functions
Encapsulamento 10-MSOP
Package Type 10-TFSOP, 10-MSOP
Package Width 0.118 inch (3.00 mm)
Tipo de montagem Surface mount

Guia de Configuração de Pinos do SY88923VKG 0.118 inch (3.00 mm)

Configuração de pinos para SY88923VKG (pacote 0.118 inch (3.00 mm)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 0.118 inch (3.00 mm) para SY88923VKG

Nenhum dado detalhado de pinagem disponível para SY88923VKG.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SY88923VKG é adequado para 6 aplicaçãos: High-Speed PECL Data Regeneration, Telecommunications Backplane Links, Clock Distribution Buffering, Serial and Parallel Interface Conditioning, Industrial Control Data Links, Test and Measurement Signal Paths.

🌐

High-Speed PECL Data Regeneration

The SY88923VKG fits a regeneration stage where a degraded digital waveform must be restored before reaching another logic device. Its listed 2.5 Gbps capability and limiting-amplifier function target high-speed PECL links, while the 3.3V-to-5V supply range supports common digital rails. The circuit should use controlled-impedance routing and the termination arrangement specified by the manufacturer application diagram. Because the dual package contains two functions, two related channels can be conditioned when their timing and routing requirements permit. Verify input sensitivity, output amplitude, propagation delay, and channel skew against the receiver requirements before production release.

🌐

Telecommunications Backplane Links

The SY88923VKG is applicable to compact telecommunications equipment that distributes or regenerates PECL-based clock and data signals. Its 10-MSOP format supports board-space conservation, and its 2.5 Gbps listed rate fits high-speed backplane and communication-interface requirements. The design must maintain continuous reference planes, minimize trace stubs, and provide local supply bypassing. Signal amplitude and timing margins must be checked after accounting for connector and trace losses. The two internal amplifier functions can simplify dual-channel arrangements, but skew between channels and sensitivity to power-supply noise remain important system-level constraints.

🖥️

Clock Distribution Buffering

The SY88923VKG can be evaluated for clock regeneration where a PECL source needs a restored, logic-compatible output. The limiting function helps convert a marginal high-speed waveform into defined digital levels, and the 2.5 Gbps rating covers a substantial portion of legacy parallel-bus and serial-deserializer clocking systems. Use short, impedance-controlled traces and keep the output termination consistent with the receiver interface. Because clock quality is affected by jitter and duty-cycle distortion, review the manufacturer timing limits and measure the resulting eye margin under operating temperature and supply variation.

🔧

Serial and Parallel Interface Conditioning

The SY88923VKG can support signal conditioning within high-speed interface assemblies that use PECL-compatible links. Its 2.5 Gbps maximum listed data rate provides a useful design target for legacy serializer, deserializer, and parallel-interface clock paths. The amplifier is placed after the source or channel segment where waveform amplitude has degraded, and it regenerates the signal before the receiving circuit. Validate the complete path using the source output swing, receiver threshold, trace loss, connector effects, and timing budget. Proper reference-plane continuity and local decoupling are essential for repeatable behavior across production boards.

🏭

Industrial Control Data Links

The SY88923VKG can be considered for compact industrial control modules that exchange high-speed logic signals over short board or backplane routes. The 10-MSOP package offers a practical surface-mount footprint, and the 3.3V-to-5V supply range supports common embedded-system rails. Its dual limiting architecture may serve paired clock-and-data paths when skew is acceptable. Industrial equipment should account for temperature range, supply tolerance, grounding, and EMC behavior before release. Confirm the applicable environmental ratings and use the manufacturer reference circuit as the basis for input and output networks.

🖥️

Test and Measurement Signal Paths

The SY88923VKG is useful in test and measurement modules that need to restore high-speed digital states before instrumentation, trigger, or acquisition circuitry. Its dual PECL limiting function and 2.5 Gbps listed capability suit legacy high-speed test buses. The design should minimize insertion loss, maintain return-path continuity, and avoid placing test pads that create unwanted stubs unless they are characterized. Validate amplitude recovery, delay, and deterministic output behavior with the manufacturer's electrical characteristics. Any external attenuators, adapters, or cable assemblies must be included in the end-to-end channel review because they can determine whether the amplifier operates within its intended input range.

What is the SY88923VKG?
The SY88923VKG is a dual PECL limiting post amplifier operating from 3.3V to 5V with a listed maximum data rate of 2.5 Gbps. According to the Microchip Technology product information, it is packaged in 10-MSOP, a 10-lead surface-mount package with a 0.118-inch, 3.00 mm body width. It is intended for conditioning and regenerating high-speed digital signals.
What is the maximum data rate of the SY88923VKG?
The SY88923VKG supports data rates up to 2.5 Gbps. The Microchip Technology product listing identifies the device as a 3.3V-to-5V, 2.5 Gbps PECL post amplifier. For a new layout, use the manufacturer datasheet to confirm rise-time, jitter, and timing margins at the operating data rate before treating 2.5 Gbps as a guaranteed end-to-end channel result.
What supply voltage does the SY88923VKG require?
The SY88923VKG is specified for a 3.3V-to-5V supply range. This range allows use with common low-voltage digital rails, as identified in the Microchip Technology product listing. Check the manufacturer datasheet for the recommended bypass capacitance, supply sequencing limits, and operating current before finalizing the power subsystem.
Where can I download the SY88923VKG datasheet PDF?
The SY88923VKG datasheet can be accessed through the Microchip Technology document listing on Octopart at https://octopart.com/datasheet/microchip/SY88923VKG. The manufacturer datasheet is the controlling source for pin assignments, recommended application circuitry, electrical limits, timing characteristics, and package drawings. Use the SY88923VKG-specific document rather than a generic amplifier datasheet.
Where is the SY88923VKG pinout located?
The SY88923VKG pinout is located in the pin-description table and package drawing in the Microchip Technology manufacturer datasheet. The device has 10 leads in a 10-MSOP package, but the exact signal names, supply connections, reference pins, and input or output orientation must be taken from that table. Do not infer the pinout from another member of the SY88923 family.
Is the SY88923VKG suitable for 2.5Gbps communication links?
The SY88923VKG is specifically listed for operation up to 2.5 Gbps with a 3.3V-to-5V supply, making it suitable for consideration in high-speed PECL links. Suitability also depends on input amplitude, jitter, channel loss, source and load impedances, and receiver timing. Confirm those parameters in the manufacturer datasheet and validate the complete channel rather than relying only on the headline data rate.
Where can I buy SY88923VKG online?
Use the Request a Quote form on this page to request SY88923VKG availability, quantity pricing, and lead time for the exact 10-MSOP device. The product is listed with immediate-shipment inventory and an estimated delivery window on a distributor listing dated November 2026, but current stock can change quickly. Submit the required quantity, reel or cut-tape preference, and destination for a current quotation.
What is the price of SY88923VKG?
Current pricing for the SY88923VKG is obtained through the Request a Quote form on this page. The product record contains a unit-price reference and inventory information, but no qualifying multi-quantity price table for the exact MPN. A quotation can be matched to the requested quantity, package form, and delivery destination without presenting a potentially stale price as a firm offer.
What is the lead time for SY88923VKG?
The listed distributor inventory for SY88923VKG includes 66,960 pieces and states that shipments can begin immediately, with an estimated delivery window of December 13 to December 18. Use the Request a Quote form on this page to confirm current lead time, available pack option, and shipment schedule for the required quantity. These dates are product-listing references rather than a guaranteed customer delivery promise.
Is SY88923VKG in stock?
The SY88923VKG was listed with 66,960 pieces available for immediate shipment on the referenced distributor page. Inventory is time-sensitive and may change after the November 2026 listing, so use the Request a Quote form on this page to confirm the current quantity. Specify whether the order requires the manufacturer's tape-and-reel presentation or another approved packing format.
What is the best drop-in replacement for SY88923VKG?
No verified drop-in replacement can be named confidently from the available component and cross-reference information. A valid replacement must match the 10-MSOP footprint, pin functions, 3.3V-to-5V supply operation, PECL interface, and 2.5 Gbps performance without changing the PCB or external terminations. Treat the SY88923VKG-TR listing as a packing designation for the same device, not as a functionally distinct replacement.
Can SY88913VKG replace SY88923VKG?
The SY88913VKG should not be treated as a drop-in replacement for the SY88923VKG without a complete manufacturer pin and timing comparison. The available comparison page establishes that the two parts are related but does not provide a verified pin-compatible, 2.5 Gbps match. Review the Microchip Technology datasheets for pin assignments, supply voltage, data rate, propagation delay, and termination requirements before approving a substitution.
When should I choose SY88923VKG over another limiting amplifier?
Choose the SY88923VKG when the design requires two PECL limiting functions in a 10-MSOP package and operation up to 2.5 Gbps from a 3.3V-to-5V rail. A different amplifier is preferable if it offers a lower data rate, different logic levels, better timing performance, fewer channels, or a verified package and pinout match. The correct choice must be based on the complete interface requirements rather than package similarity alone.
Is SY88923VKG suitable for clock and data recovery?
The SY88923VKG can be considered for high-speed clock or data regeneration because it is a dual 2.5 Gbps PECL limiting post amplifier. Its usefulness depends on signal amplitude, input and output timing, deterministic logic levels, channel skew, and the receiver's setup and hold requirements. Use the manufacturer application circuit as the basis for terminations and then verify the design with appropriate high-speed signal-integrity analysis.
What are the key specifications of SY88923VKG that engineers should know?
The key identified specifications are a 3.3V-to-5V supply range, a maximum listed data rate of 2.5 Gbps, PECL logic compatibility, two amplifier functions, and a 10-MSOP package measuring 0.118 inches, or 3.00 mm, in body width. According to the Microchip Technology product information, these features position the device for high-speed limiting and signal-regeneration duties. Timing, current, noise, and temperature limits remain datasheet details.
What can replace SY88923VKG?
A replacement for the SY88923VKG must be a pin-compatible, 10-MSOP, 3.3V-to-5V PECL limiting amplifier rated for the required data rate, which is listed up to 2.5 Gbps. The available information does not establish five distinct, fully verified drop-in devices, so no replacement is asserted. Use the manufacturer cross-reference search or request engineering support with the target interface, timing, and termination requirements.

Dados de referência de engenharia para SY88923VKG — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the SY88923VKG for a compact high-speed PECL interface requiring two limiting functions, a 3.3V-to-5V supply, and operation up to 2.5 Gbps. Its 10-MSOP package is particularly useful when board space is constrained and two related channels need consistent treatment. Choose the SY88913VKG only after checking its pinout, data rate, timing, and termination requirements; the available information does not demonstrate drop-in equivalence. For a different device to serve as a replacement, it must match the 10-MSOP footprint, pin functions, supply range, logic levels, data rate, and external network while preserving the receiver's timing margin. Confirm the manufacturer's recommended application circuit before layout, and validate amplitude recovery, propagation delay, jitter, and inter-channel skew under real loading conditions.

Comparação com alternativas

Parâmetro Este produto
Brand Microchip Technology
Package 10-MSOP
Device Type Dual limiting post amplifier
Logic Family PECL
Maximum Data Rate 2.5 Gbps
Supply Voltage Range 3.3 V to 5 V
Number of Functions 2
Package Width 0.118 inch (3.00 mm)

Principais diferenciais

  • Dual limiting functions in a compact package (vs SY88913VKG)
  • 2.5Gbps listed operating rate (vs SY88913VKG)
  • 3.3V-to-5V operating range (vs SY88913VKG)

Notas de projeto

Treat the SY88923VKG as a digital regenerator rather than a general linear amplifier. Follow the Microchip Technology application circuit for PECL input and output termination, and maintain controlled-impedance traces with a continuous ground reference. Keep routing short, avoid unnecessary pads and stubs, and verify input amplitude, rise time, propagation delay, and jitter at the intended data rate before releasing the layout.

Place the required bypass capacitors close to the supply and ground pins and route them with short, low-inductance connections. The 3.3V-to-5V operating range does not eliminate the need for local decoupling, especially in systems containing switching converters or other high-current logic. Confirm capacitor type, voltage rating, and placement against the manufacturer datasheet, and keep the return current out of sensitive signal paths.

Do not assume that a related SY88923-family device is a drop-in replacement merely because it uses a related package. Pin functions, data rate, supply limits, timing, and external terminations must all match. The SY88923VKG-TR designation represents a tape-and-reel ordering form of the SY88923VKG and should not be counted as a separate engineering alternative. Verify the exact ordering code when creating a BOM or approving a substitute.

Use the two amplifier channels consistently so their propagation and routing behavior remain predictable. If both channels carry related clock or data signals, match trace geometry and layer transitions to minimize channel-to-channel skew. Maintain adequate spacing from clocks and other high-energy nets, and use a solid ground plane beneath the high-speed route to reduce radiated emissions and susceptibility to external interference.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes are not stated in the available product information and require confirmation from the Microchip Technology product page or manufacturer datasheet.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SY88923VKG datasheet SY88923VKG datasheet pdf SY88923VKG pinout SY88923VKG equivalent SY88923VKG replacement SY88923VKG cross reference SY88923VKG vs SY88913VKG SY88923VKG 2.5Gbps SY88923VKG 3.3V 5V SY88923VKG 10-MSOP Microchip SY88923VKG SY88923VKG PECL amplifier SY88923VKG price SY88923VKG stock

Componentes & termos relacionados

Microchip Technology SY88923VKG SY88923VKG-TR SY88913VKG PECL positive emitter-coupled logic limiting post amplifier limiting amplifier amplifier IC high-speed digital signal conditioning 2.5 Gbps 3.3 V 5 V 10-MSOP surface mount SMD data regeneration clock distribution telecommunications backplane controlled-impedance routing propagation delay jitter input termination output termination
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ