Microchip Technology

SY89871UMI - 2.5 GHz 1:3 Clock Fanout Buffer | Microchip

N.º da peça: SY89871UMI ✓ Ativo
16-VFQFN exposed pad, 16-MLF Package 2.5 GHz Speed
MOQ: 1 |

SY89871UMI Visão geral

Microchip Technology SY89871UMI is a 2.5 GHz maximum-frequency clock fanout buffer and divider IC with a 1:3 distribution ratio, differential input support, and LVPECL outputs. The device is housed in a 16-VFQFN exposed-pad, 16-MLF surface-mount package and is intended for high-speed clock distribution, programmable clock generation, and timing-system fanout.

A clock fanout buffer is a clock-and-timing integrated circuit that receives one differential reference signal and produces multiple synchronized copies. Within the broader semiconductor hierarchy, the SY89871UMI is a clock buffer, then a clock distribution device, then a clock-and-timing IC, and finally a power-management-adjacent signal-integrity component. Its differential signaling helps preserve signal integrity when routing high-speed clocks through printed-circuit boards.

The SY89871UMI supports CML, HSTL, LVDS, and LVPECL input formats while driving LVPECL outputs. Its 1:3 fanout configuration allows a single differential clock source to feed three output branches. A maximum operating frequency of 2.5 GHz makes the device suitable for demanding communications, networking, and processor-clock systems where deterministic timing and consistent edge rates are important.

The architecture combines clock distribution with programmable divider functionality, allowing one input reference to support multiple related clock outputs. Differential clock operation reduces susceptibility to common-mode noise, while LVPECL output levels suit high-speed backplanes and clock trees operating with suitable termination and biasing. Differential input and output implementation also enables flexible use in multipoint clock-distribution networks.

Typical applications include networking equipment, telecommunications infrastructure, data-converter clocking, high-speed serial-interface reference distribution, and FPGA or ASIC clock trees. In these systems, the buffer can distribute a low-jitter reference to multiple functional blocks while providing gain and isolation from source loading. The 16-VFQFN exposed-pad package supports compact surface-mount layouts, although thermal and return-path design remain important.

For implementation, follow the pin-description table and recommended termination network in the manufacturer datasheet. Preserve the differential trace geometry on the input and output pairs, provide a continuous ground reference, and place bypass and termination components close to the device. Confirm output enable, reference configuration, and divider settings before committing the PCB layout.

This page consolidates the verified device specifications, a confirmed same-footprint replacement, application guidance, and engineering-oriented comparisons. It is designed to help engineers identify suitability, plan replacement decisions, and implement the SY89871UMI correctly without relying only on a basic distributor catalog entry.

Alternativas drop-in para SY89871UMI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

SY89871UMG

✅ Drop-In
📦 16-VFQFN Exposed Pad, 16-MLF
Maximum frequency and fanout match at 2.5 GHz and 1:3 respectively, producing a 0% difference on those compared ratings; terminals and package arrangement are consistent.

📋 Alternativa de referência (fora do catálogo)

SY89871UMI Especificações

Device Type Clock Fanout Buffer (Distribution), Divider IC
Maximum Frequency 2.5 GHz
Fanout Ratio 1:3
Input Logic Levels CML, HSTL, LVDS, LVPECL
Output Logic Level LVPECL
Input Configuration Differential
Programmability Programmable clock divider function
Encapsulamento 16-VFQFN exposed pad, 16-MLF
Tipo de montagem Surface mount
Lead-Free Status Yes
RoHS Compliance Compliant

Guia de Configuração de Pinos do SY89871UMI 16-vfqfn exposed pad, 16-mlf

Configuração de pinos para SY89871UMI (pacote 16-vfqfn exposed pad, 16-mlf). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-vfqfn exposed pad, 16-mlf para SY89871UMI

Nenhum dado detalhado de pinagem disponível para SY89871UMI.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SY89871UMI é adequado para 6 aplicaçãos: Networking Equipment Clock Distribution, FPGA Clock Tree, Telecommunications Backplane Clocking, Data Converter Reference Clock, ASIC Reference Clock Fanout, High-Speed Test and Measurement.

🌐

Networking Equipment Clock Distribution

The SY89871UMI fits networking equipment that must distribute one stable differential reference to multiple timing domains. Its 1:3 fanout ratio can feed three destination circuits from one source, while the 2.5 GHz maximum frequency supports high-speed communication architectures. Differential CML, HSTL, LVDS, or LVPECL input selection gives the design source flexibility, and the LVPECL output provides a consistent interface for compatible downstream circuits. Use controlled impedance and the documented termination network so the three branches preserve edge quality. This arrangement is especially useful where a processor, transceiver, and converter must receive related clock signals without loading the reference oscillator directly.

🖥️

FPGA Clock Tree

The SY89871UMI can serve as a fanout stage in an FPGA clock tree when one differential reference must reach several programmable-logic regions. The 1:3 distribution ratio provides three clock branches, and the 2.5 GHz maximum frequency accommodates demanding fabric and high-speed interface clocks. Differential input and LVPECL output behavior make the device suitable for a designed high-speed clock network, provided the source amplitude, output termination, and target clock requirements are compatible. Keep each differential pair length-matched within the implementation’s timing budget, preserve a continuous ground reference, and place termination close to the receiving device to avoid reflections.

📡

Telecommunications Backplane Clocking

The SY89871UMI is appropriate for telecommunications systems requiring a low-frequency, high-speed differential reference distributed across multiple backplane sections. Its LVPECL outputs are suited to properly terminated high-speed clock networks, while the selectable input standards allow interface with multiple differential clock sources. The 1:3 fanout is useful for line cards, optical modules, or switching elements that need synchronized references. The 2.5 GHz maximum operating frequency provides margin for demanding timing architectures, but the design must still account for trace loss, skew between branches, termination topology, and any divider delay needed by the target system.

🔧

Data Converter Reference Clock

The SY89871UMI can distribute a reference clock among multiple data-converter or signal-processing channels. Its differential input helps maintain clock integrity over a routed reference path, and its 1:3 fanout supports one-to-many timing distribution without directly loading the clock generator. The LVPECL output interface can drive suitable converter clock inputs when the required amplitude and termination are met. For multi-channel synchronization, evaluate channel-to-channel skew, converter input jitter tolerance, and the divider configuration together. The SY89871UMI is most useful when the design already uses differential clocking and needs to preserve a consistent source across several conversion paths.

⚡

ASIC Reference Clock Fanout

The SY89871UMI suits ASIC reference-clock trees where a central timing source must reach multiple cores, serializers, or interface blocks. The 2.5 GHz maximum frequency covers high-speed internal clock distribution, while the 1:3 ratio provides three branches from one differential input. LVPECL outputs offer a defined transition format for compatible logic, and the fanout function can reduce the loading burden on the primary oscillator. Engineers should validate input swing, enable sequencing, divider settings, output loading, and package thermal performance against the ASIC requirements. Maintain symmetric routing and use the manufacturer’s recommended termination arrangement to minimize edge degradation.

🖥️

High-Speed Test and Measurement

The SY89871UMI can be used in high-speed test equipment to distribute a common differential reference across measurement or processing channels. Its 1:3 fanout supports a modular architecture in which one clock source feeds three functional paths, while the 2.5 GHz maximum frequency enables use with demanding test-clock rates. Differential input and LVPECL output provide a controlled interface for compatible instrumentation blocks. The primary engineering considerations are reference jitter, deterministic branch skew, return loss, and loading. Keep clock routes short where possible, use matched differential geometry, provide clean power and ground planes, and validate the complete divider and enable sequence before using the device for synchronization-sensitive measurements.

What is the SY89871UMI clock fanout buffer used for?
The SY89871UMI is a 2.5 GHz maximum-frequency clock fanout buffer with a 1:3 distribution ratio. According to the manufacturer datasheet, it accepts differential CML, HSTL, LVDS, or LVPECL inputs and produces LVPECL outputs. It is used to distribute one clock reference across three branches while adding drive strength and limiting source loading in high-speed clock trees.
What is the maximum frequency of the SY89871UMI?
The SY89871UMI operates to a maximum frequency of 2.5 GHz. The manufacturer datasheet identifies the device as a differential-input, LVPECL-output clock fanout and divider. This frequency capability suits high-speed networking, telecommunications, data-converter, FPGA, and ASIC reference-clock systems, subject to the documented input-output and termination requirements.
What input and output formats does the SY89871UMI support?
The SY89871UMI accepts CML, HSTL, LVDS, and LVPECL inputs and provides LVPECL outputs. According to the manufacturer datasheet, the input is differential, which supports common-mode-noise rejection in high-speed systems. The exact input amplitude, voltage, termination, and output timing limits should be taken from the pin and electrical-characteristics tables before design release.
Where can I download the SY89871UMI datasheet PDF?
The manufacturer datasheet is the authoritative source for the SY89871UMI pinout, electrical characteristics, recommended application circuit, and layout guidance. Use the Microchip Technology product page and datasheet navigation for SY89871UMI, or select the manufacturer datasheet link on this page. Confirm that the document applies specifically to the SY89871UMI ordering code.
Where can I find the SY89871UMI pinout and package drawing?
The SY89871UMI pin assignment and package drawing are located in the pin-description and mechanical-drawing sections of the manufacturer datasheet. The device uses a 16-VFQFN exposed-pad, 16-MLF package. Assign PCB pads from that document rather than inferring connections from the clock-buffer function, because control, reference, power, and ground pins must follow the exact ordering variant.
Can the SY89871UMI be used as a programmable clock divider?
Yes, the SY89871UMI includes programmable clock-divider functionality in addition to its fanout-buffer role. The manufacturer describes it as a fanout buffer and divider IC with a 1:3 distribution ratio. For implementation, verify the supported divide ratios, configuration pins, reference requirements, and valid operating combinations in the device's configuration and timing tables.
What is the difference between the SY89871UMI and SY89871UMG?
The SY89871UMI and SY89871UMG use the same 16-VFQFN exposed-pad, 16-MLF arrangement and are reported as pin and package consistent. Their fanout-buffer and divider functions are therefore closely aligned, while the ordering suffixes identify distinct device variants. Review the manufacturer ordering table for temperature-grade, lead-free, or qualification differences before selecting either variant.
What is the best drop-in replacement for the SY89871UMI?
The SY89871UMG is the confirmed same-package replacement identified for the SY89871UMI. Cross-reference information reports consistent terminals and package, permitting replacement without PCB changes, and both belong to the SY89871 series. Confirm the operating grade and configuration requirements against the manufacturer ordering information before production substitution.
When should I choose the SY89871UMI instead of a standalone clock oscillator?
Choose the SY89871UMI when an existing low-jitter reference must drive multiple high-speed loads. Its 1:3 fanout, differential input support, and 2.5 GHz maximum frequency make it appropriate for clock distribution and programmable divider functions. A standalone oscillator is preferable when the system needs an independent frequency source rather than distribution of an externally supplied reference.
Is the SY89871UMI suitable for FPGA and ASIC clock trees?
The SY89871UMI is suitable for FPGA and ASIC clock trees that require differential reference distribution. Its 1:3 fanout allows one source to feed three destinations, while LVPECL outputs provide a defined high-speed interface. The complete clock topology, target load, jitter budget, fanout arrangement, and device enable requirements must be confirmed before implementation.
How should differential clock traces be routed for the SY89871UMI?
Route each differential input and LVPECL output pair with continuous impedance control, matched trace geometry, and minimal stubs. According to the manufacturer datasheet guidance, maintain the specified reference-plane transition and termination arrangement. Keep bypass and termination components close to their associated pins, and avoid introducing discontinuities that would degrade the 2.5 GHz clock signal.
Is there a Microchip equivalent for the SY89871UMI?
The SY89871UMG is the Microchip equivalent identified for the SY89871UMI because its terminal arrangement and package are consistent with the original device. It is a same-manufacturer option that supports direct replacement without changing the PCB footprint. Confirm device-specific configuration, temperature grade, and lifecycle requirements in the manufacturer ordering documentation.
What is the best cross-brand equivalent for the SY89871UMI?
No cross-brand drop-in equivalent is established for the SY89871UMI. Cross-reference results identify the same-manufacturer SY89871UMG, but they do not establish a competitor part with the same 16-pin footprint, differential input formats, 1:3 fanout, divider function, and LVPECL output configuration. Use the Microchip option or complete a manufacturer-level qualification before considering another supplier.
Can I replace the SY89871UMI without changing the PCB?
Yes, the SY89871UMG can replace the SY89871UMI without changing the PCB because cross-reference information reports consistent terminals and packages. Both devices use the 16-VFQFN exposed-pad, 16-MLF package. Review the ordering suffixes and verify configuration, temperature-grade, and qualification requirements before approving the substitution.
What key specifications of the SY89871UMI should engineers know?
The key SY89871UMI specifications are a 2.5 GHz maximum operating frequency, 1:3 fanout ratio, differential input, programmable divider function, and LVPECL output. The manufacturer datasheet also identifies CML, HSTL, LVDS, and LVPECL input support. These features place the device in high-speed differential clock distribution rather than general-purpose low-frequency clock buffering.
How do I request a quote and current lead time for the SY89871UMI?
Use the Request a Quote form on this page to ask about the SY89871UMI, current lead time, stock status, and order quantity. The device is listed as active by the manufacturer, but current commercial availability can change. The 16-VFQFN exposed-pad, 16-MLF package and exact SY89871UMI ordering suffix should be stated on the request.

Dados de referência de engenharia para SY89871UMI — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the SY89871UMI when the design needs a 2.5 GHz-class differential clock to be distributed in a 1:3 ratio with LVPECL outputs and programmable divider functionality. Select the SY89871UMG when it is preferable to standardize on the other ordering code from the same Microchip series; it provides a confirmed 16-VFQFN exposed-pad, 16-MLF drop-in path with matching frequency and fanout ratings. No cross-brand part is established as a drop-in alternative because frequency, input standards, divider behavior, output type, and exact terminal arrangement must all remain compatible. If the clock source is single-ended, output voltage differs, or the required divide function is unavailable, do not substitute this device without a complete interface redesign. For new layouts, confirm the manufacturer’s pin description, termination, exposed-pad connection, and power requirements before artwork release.

Comparação com alternativas

Parâmetro Este produto SY89871UMG
Device Type Clock Fanout Buffer, Divider IC Clock Fanout Buffer, Divider IC
Maximum Frequency 2.5 GHz 2.5 GHz
Fanout Ratio 1:3 1:3
Input Logic Levels CML, HSTL, LVDS, LVPECL CML, HSTL, LVDS, LVPECL
Output Logic Level LVPECL LVPECL
Programmable Divider Yes Yes
Package 16-VFQFN Exposed Pad, 16-MLF 16-VFQFN Exposed Pad, 16-MLF
Brand Microchip Technology Microchip Technology
Product Status Active Active
RoHS Status Compliant Compliant

Principais diferenciais

  • Confirmed same-footprint replacement path (vs SY89871UMG)
  • Broad differential input-format support (vs SY89871UMG)
  • Integrated distribution and divider functionality (vs SY89871UMG)

Notas de projeto

Route the differential clock input and all LVPECL output pairs as coupled traces with matched geometry and a continuous reference plane. Avoid stubs, abrupt width changes, and splits across plane boundaries. Keep the clock source and receiving circuits on the same ground system, and place any termination network close to the relevant device pin. Differential routing preserves common-mode-noise rejection, but it cannot compensate for uncontrolled impedance discontinuities or excessive trace loss.

Use the manufacturer datasheet as the authority for exposed-pad connection, bypass placement, input amplitude, and termination values. Place bypass capacitors and termination components directly beside their associated pins rather than extending them through shared traces. Confirm whether the exposed pad connects to ground, a supply rail, or another specified network before layout release. The compact 16-VFQFN arrangement reduces footprint area but leaves little tolerance for long return paths and poorly controlled thermal connections.

Do not assume that any 1:3 clock buffer is automatically interchangeable. The SY89871UMI must also satisfy the required differential input standard, LVPECL output interface, maximum 2.5 GHz frequency, divider configuration, and exact 16-pin footprint. Validate output-enable polarity, reference requirements, supported divider settings, and power sequencing from the manufacturer configuration tables. This prevents a PCB-compatible part from becoming electrically incompatible after substitution.

Although the SY89871UMI is a clock-and-timing IC rather than a power semiconductor, the 16-VFQFN exposed pad requires deliberate thermal and electrical layout. Follow the datasheet’s exposed-pad connection and copper guidance, maintain uninterrupted ground-plane continuity, and avoid placing thermally isolated copper fragments beneath the device. Check the supply voltage, output loading, and ambient temperature against the device’s documented operating limits before treating the compact package as electrically and thermally interchangeable with a larger clock-buffer package.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Yes
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance and lead-free construction are reported for the SY89871 series. No explicit REACH, AEC-Q100, halogen-free, or conflict-minerals statement is identified for this ordering code.

Buscas relacionadas

SY89871UMI datasheet SY89871UMI specifications SY89871UMI pinout SY89871UMI datasheet pdf SY89871UMI equivalent SY89871UMI replacement SY89871UMI cross reference SY89871UMI vs SY89871UMG SY89871UMI 2.5 GHz SY89871UMI 16-VFQFN Microchip SY89871UMI SY89871UMI application circuit SY89871UMI price SY89871UMI stock where to buy SY89871UMI

Componentes & termos relacionados

Microchip Technology SY89871UMI SY89871UMG SY89871 series clock fanout buffer clock distribution device clock divider clock-and-timing IC semiconductor 1:3 fanout 2.5 GHz clock differential clock CML HSTL LVDS LVPECL 16-VFQFN exposed pad 16-MLF surface-mount package RoHS lead-free FPGA clock tree ASIC reference clock telecommunications backplane networking equipment
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ