SY89871UMI - 2.5 GHz 1:3 Clock Fanout Buffer | Microchip
부품 번호: SY89871UMI ✓ 활성SY89871UMI 개요
A clock fanout buffer is a clock-and-timing integrated circuit that receives one differential reference signal and produces multiple synchronized copies. Within the broader semiconductor hierarchy, the SY89871UMI is a clock buffer, then a clock distribution device, then a clock-and-timing IC, and finally a power-management-adjacent signal-integrity component. Its differential signaling helps preserve signal integrity when routing high-speed clocks through printed-circuit boards.
The SY89871UMI supports CML, HSTL, LVDS, and LVPECL input formats while driving LVPECL outputs. Its 1:3 fanout configuration allows a single differential clock source to feed three output branches. A maximum operating frequency of 2.5 GHz makes the device suitable for demanding communications, networking, and processor-clock systems where deterministic timing and consistent edge rates are important.
The architecture combines clock distribution with programmable divider functionality, allowing one input reference to support multiple related clock outputs. Differential clock operation reduces susceptibility to common-mode noise, while LVPECL output levels suit high-speed backplanes and clock trees operating with suitable termination and biasing. Differential input and output implementation also enables flexible use in multipoint clock-distribution networks.
Typical applications include networking equipment, telecommunications infrastructure, data-converter clocking, high-speed serial-interface reference distribution, and FPGA or ASIC clock trees. In these systems, the buffer can distribute a low-jitter reference to multiple functional blocks while providing gain and isolation from source loading. The 16-VFQFN exposed-pad package supports compact surface-mount layouts, although thermal and return-path design remain important.
For implementation, follow the pin-description table and recommended termination network in the manufacturer datasheet. Preserve the differential trace geometry on the input and output pairs, provide a continuous ground reference, and place bypass and termination components close to the device. Confirm output enable, reference configuration, and divider settings before committing the PCB layout.
This page consolidates the verified device specifications, a confirmed same-footprint replacement, application guidance, and engineering-oriented comparisons. It is designed to help engineers identify suitability, plan replacement decisions, and implement the SY89871UMI correctly without relying only on a basic distributor catalog entry.
드롭인 대체품: SY89871UMI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
SY89871UMG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SY89871UMI 사양
| Device Type | Clock Fanout Buffer (Distribution), Divider IC |
| Maximum Frequency | 2.5 GHz |
| Fanout Ratio | 1:3 |
| Input Logic Levels | CML, HSTL, LVDS, LVPECL |
| Output Logic Level | LVPECL |
| Input Configuration | Differential |
| Programmability | Programmable clock divider function |
| 패키지 | 16-VFQFN exposed pad, 16-MLF |
| 실장 유형 | Surface mount |
| Lead-Free Status | Yes |
| RoHS Compliance | Compliant |
SY89871UMI 16-vfqfn exposed pad, 16-mlf 핀 구성 가이드
SY89871UMI(16-vfqfn exposed pad, 16-mlf 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: SY89871UMI.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
SY89871UMI 적합 용도: 6 애플리케이션s: Networking Equipment Clock Distribution, FPGA Clock Tree, Telecommunications Backplane Clocking, Data Converter Reference Clock, ASIC Reference Clock Fanout, High-Speed Test and Measurement.
Networking Equipment Clock Distribution
The SY89871UMI fits networking equipment that must distribute one stable differential reference to multiple timing domains. Its 1:3 fanout ratio can feed three destination circuits from one source, while the 2.5 GHz maximum frequency supports high-speed communication architectures. Differential CML, HSTL, LVDS, or LVPECL input selection gives the design source flexibility, and the LVPECL output provides a consistent interface for compatible downstream circuits. Use controlled impedance and the documented termination network so the three branches preserve edge quality. This arrangement is especially useful where a processor, transceiver, and converter must receive related clock signals without loading the reference oscillator directly.
추천
FPGA Clock Tree
The SY89871UMI can serve as a fanout stage in an FPGA clock tree when one differential reference must reach several programmable-logic regions. The 1:3 distribution ratio provides three clock branches, and the 2.5 GHz maximum frequency accommodates demanding fabric and high-speed interface clocks. Differential input and LVPECL output behavior make the device suitable for a designed high-speed clock network, provided the source amplitude, output termination, and target clock requirements are compatible. Keep each differential pair length-matched within the implementation’s timing budget, preserve a continuous ground reference, and place termination close to the receiving device to avoid reflections.
추천
Telecommunications Backplane Clocking
The SY89871UMI is appropriate for telecommunications systems requiring a low-frequency, high-speed differential reference distributed across multiple backplane sections. Its LVPECL outputs are suited to properly terminated high-speed clock networks, while the selectable input standards allow interface with multiple differential clock sources. The 1:3 fanout is useful for line cards, optical modules, or switching elements that need synchronized references. The 2.5 GHz maximum operating frequency provides margin for demanding timing architectures, but the design must still account for trace loss, skew between branches, termination topology, and any divider delay needed by the target system.
추천
Data Converter Reference Clock
The SY89871UMI can distribute a reference clock among multiple data-converter or signal-processing channels. Its differential input helps maintain clock integrity over a routed reference path, and its 1:3 fanout supports one-to-many timing distribution without directly loading the clock generator. The LVPECL output interface can drive suitable converter clock inputs when the required amplitude and termination are met. For multi-channel synchronization, evaluate channel-to-channel skew, converter input jitter tolerance, and the divider configuration together. The SY89871UMI is most useful when the design already uses differential clocking and needs to preserve a consistent source across several conversion paths.
추천
ASIC Reference Clock Fanout
The SY89871UMI suits ASIC reference-clock trees where a central timing source must reach multiple cores, serializers, or interface blocks. The 2.5 GHz maximum frequency covers high-speed internal clock distribution, while the 1:3 ratio provides three branches from one differential input. LVPECL outputs offer a defined transition format for compatible logic, and the fanout function can reduce the loading burden on the primary oscillator. Engineers should validate input swing, enable sequencing, divider settings, output loading, and package thermal performance against the ASIC requirements. Maintain symmetric routing and use the manufacturer’s recommended termination arrangement to minimize edge degradation.
추천
High-Speed Test and Measurement
The SY89871UMI can be used in high-speed test equipment to distribute a common differential reference across measurement or processing channels. Its 1:3 fanout supports a modular architecture in which one clock source feeds three functional paths, while the 2.5 GHz maximum frequency enables use with demanding test-clock rates. Differential input and LVPECL output provide a controlled interface for compatible instrumentation blocks. The primary engineering considerations are reference jitter, deterministic branch skew, return loss, and loading. Keep clock routes short where possible, use matched differential geometry, provide clean power and ground planes, and validate the complete divider and enable sequence before using the device for synchronization-sensitive measurements.
추천
추천 제품 요약
엔지니어링 참조 데이터: SY89871UMI — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SY89871UMG |
|---|---|---|
| Device Type | Clock Fanout Buffer, Divider IC | Clock Fanout Buffer, Divider IC |
| Maximum Frequency | 2.5 GHz | 2.5 GHz |
| Fanout Ratio | 1:3 | 1:3 |
| Input Logic Levels | CML, HSTL, LVDS, LVPECL | CML, HSTL, LVDS, LVPECL |
| Output Logic Level | LVPECL | LVPECL |
| Programmable Divider | Yes | Yes |
| Package | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF |
| Brand | Microchip Technology | Microchip Technology |
| Product Status | Active | Active |
| RoHS Status | Compliant | Compliant |
주요 차별점
- Confirmed same-footprint replacement path (vs SY89871UMG)
- Broad differential input-format support (vs SY89871UMG)
- Integrated distribution and divider functionality (vs SY89871UMG)
설계 노트
Route the differential clock input and all LVPECL output pairs as coupled traces with matched geometry and a continuous reference plane. Avoid stubs, abrupt width changes, and splits across plane boundaries. Keep the clock source and receiving circuits on the same ground system, and place any termination network close to the relevant device pin. Differential routing preserves common-mode-noise rejection, but it cannot compensate for uncontrolled impedance discontinuities or excessive trace loss.
Use the manufacturer datasheet as the authority for exposed-pad connection, bypass placement, input amplitude, and termination values. Place bypass capacitors and termination components directly beside their associated pins rather than extending them through shared traces. Confirm whether the exposed pad connects to ground, a supply rail, or another specified network before layout release. The compact 16-VFQFN arrangement reduces footprint area but leaves little tolerance for long return paths and poorly controlled thermal connections.
Do not assume that any 1:3 clock buffer is automatically interchangeable. The SY89871UMI must also satisfy the required differential input standard, LVPECL output interface, maximum 2.5 GHz frequency, divider configuration, and exact 16-pin footprint. Validate output-enable polarity, reference requirements, supported divider settings, and power sequencing from the manufacturer configuration tables. This prevents a PCB-compatible part from becoming electrically incompatible after substitution.
Although the SY89871UMI is a clock-and-timing IC rather than a power semiconductor, the 16-VFQFN exposed pad requires deliberate thermal and electrical layout. Follow the datasheet’s exposed-pad connection and copper guidance, maintain uninterrupted ground-plane continuity, and avoid placing thermally isolated copper fragments beneath the device. Check the supply voltage, output loading, and ambient temperature against the device’s documented operating limits before treating the compact package as electrically and thermally interchangeable with a larger clock-buffer package.
규정 준수 정보
RoHS compliance and lead-free construction are reported for the SY89871 series. No explicit REACH, AEC-Q100, halogen-free, or conflict-minerals statement is identified for this ordering code.