Texas Instruments

TAS5613PHD - 150W Stereo Class-D Power Stage | Texas Instruments

N.º da peça: TAS5613PHD ✓ Ativo
18 V to 38 V Vdss 64-pin HTQFP, 14 mm x 14 mm Package
MOQ: 1 |

TAS5613PHD Visão geral

The Texas Instruments TAS5613PHD is a 150 W stereo Class-D audio power stage with integrated feedback, analog input, and 64-pin HTQFP packaging. It operates from an 18 V to 38 V power-supply range, supports a 10.8 V to 13.2 V analog input range, and supports mono or stereo output configurations. The device also provides signal bandwidth up to 80 kHz for high-definition audio content.

A Class-D audio power stage is an efficient switching amplifier that converts analog audio signals into high-power drive for loudspeakers. It belongs to the amplifier IC hierarchy, specifically the audio amplifier and power-amplifier categories. Compared with linear audio amplifiers, Class-D architectures can provide high output power with lower power dissipation because the switching elements are operated near their fully-on or fully-off states. Integrated feedback helps the device regulate its power stage and supports repeatable amplifier design.

The TAS5613PHD delivers up to 150 W in a stereo configuration and up to 300 W in a mono configuration. According to the manufacturer product page, distortion can be as low as 0.03% THD at 1 W into 4 ohms, while flat total harmonic distortion across frequency is positioned for natural sound reproduction. Power-supply rejection reaches 80 dB in bridge-tie-load operation without an input signal, and signal-to-noise ratio can exceed 100 dB when weighted for A.

The device uses PurePath HD analog-input technology and provides click-and-pop-free startup and shutdown behavior. Its integrated-feedback architecture is intended to simplify power-stage implementation while retaining high-frequency signal capability. The manufacturer identifies pin compatibility with the TAS5630, TAS5615, and TAS5611 families, enabling designers to evaluate different power levels or feature sets while retaining a common package strategy.

Typical applications include high-power stereo audio receivers, active loudspeakers, home-theater amplification, multichannel audio systems, and compact subwoofer or full-range driver stages. The 150 W stereo rating is particularly relevant to consumer and professional audio equipment where a single integrated stage can drive conventional passive loudspeakers efficiently. The 300 W mono configuration offers additional flexibility for bridged applications or higher-power single-channel systems.

Thermal design remains a central implementation consideration because Class-D power stages concentrate losses in the switching devices and package. Follow the manufacturer’s recommended land pattern, component placement, thermal-pad connection, power-supply decoupling, and output-filter guidance. Account for worst-case supply voltage, channel imbalance, amplifier gain, and enclosure temperature rather than sizing the system only from nominal output power.

This page organizes the manufacturer’s key technical facts, package information, family relationships, and engineering guidance for faster component evaluation. The comparison and selection sections also clarify how the pin-compatible TAS5613PHD relates to other PurePath HD power stages when power capability, channel architecture, and thermal requirements differ.

Alternativas drop-in para TAS5613PHD — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com TAS5613PHD (mesmo formato e footprint) — diferindo em Maximum Stereo Output Power, Product Type, Maximum Mono Output Power, Package, Total Harmonic Distortion.

Texas Instruments
Maximum Stereo Output Power: 125 W
Product Type: Analog-input Class-D audio power stage
Maximum Mono Output Power: 250 W
Comparar com TAS5613PHD →
Texas Instruments
Product Type: Class D audio power amplifier
Comparar com TAS5613PHD →
Texas Instruments
Maximum Stereo Output Power: 160 W
Package: 64-pin HTQFP with exposed pad, 14 mm x 14 mm
Total Harmonic Distortion: <0.03%
Comparar com TAS5613PHD →
Texas Instruments
Maximum Stereo Output Power: 300 W
Product Type: Analog-input Class-D audio power amplifier
Maximum Mono Output Power: 600 W
Comparar com TAS5613PHD →

TAS5615PHD

✅ Drop-In
Texas Instruments
📦 64-pin HTQFP (14 mm x 14 mm)
Class-D audio power amplifier · Analog input · Integrated PurePath HD closed-loop feedback · 160 W · 300 W · 8 ohm · 50 V · <0.03%

Consulte o preço

Ver ficha técnica →

TAS5611PHD

✅ Drop-In
Texas Instruments
📦 64-pin HTQFP (14 mm x 14 mm)
Analog-input Class-D audio power stage · PurePath HD · 125 W · 250 W · 4 ohm to 8 ohm · 32.5 V · <0.03% · 1-channel mono or 2-channel stereo

Consulte o preço

Ver ficha técnica →

TAS5630DKD

✅ Drop-In
Texas Instruments
📦 64-pin HTQFP (14 mm x 14 mm)
Analog-input Class-D audio power amplifier · PurePath HD integrated closed-loop feedback · 300 W · 600 W · 4 Ω to 8 Ω · 1-channel mono or 2-channel stereo · 10.8 V to 13.2 V · 50 V

Consulte o preço

Ver ficha técnica →

TAS5613PHD Classificações máximas e características elétricas

Product Type Stereo Class-D analog-input audio power stage
Maximum Stereo Output Power 150 W
Maximum Mono Output Power 300 W
Power-Supply Operating Range 18 V to 38 V
Analog Input Range 10.8 V to 13.2 V
Signal Bandwidth Up to 80 kHz
Total Harmonic Distortion 0.03% at 1 W into 4 ohms
Power-Supply Rejection Ratio 80 dB in BTL configuration without an input signal
Signal-to-Noise Ratio >100 dB, A-weighted
Channel Configuration 1-channel mono or 2-channel stereo
Feedback Architecture Integrated feedback
Input Architecture Analog input
Startup and Shutdown Behavior Click-and-pop-free
Encapsulamento 64-pin HTQFP, 14 mm x 14 mm
Tipo de montagem Surface mount
Pin Compatibility Compatible with TAS5630, TAS5615, and TAS5611 families

Guia de Configuração de Pinos do TAS5613PHD 64-pin htqfp, 14 mm x 14 mm

Configuração de pinos para TAS5613PHD (pacote 64-pin htqfp, 14 mm x 14 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 64-pin htqfp, 14 mm x 14 mm para TAS5613PHD

Nenhum dado detalhado de pinagem disponível para TAS5613PHD.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

TAS5613PHD é adequado para 6 aplicaçãos: Home-Theater Stereo Amplifier, Active Loudspeaker Power Module, Professional Audio Monitor, Subwoofer and Full-Range Driver Amplifier, Multichannel AV Receiver Output Stage, Automotive or Industrial Audio System.

🎧

Home-Theater Stereo Amplifier

The TAS5613PHD fits a high-power home-theater output stage because it supports 150 W stereo operation from an 18 V to 38 V power supply and provides signal bandwidth up to 80 kHz for high-definition audio sources. Its integrated-feedback architecture helps simplify the power stage, while click-and-pop-free startup and shutdown reduce unwanted transients during theater-mode changes. In a typical design, the analog drive signal enters the power-stage inputs and filtered Class-D outputs connect to the speaker channels through the manufacturer-recommended network. The 0.03% THD figure at 1 W into 4 ohms is useful for low-level listening, but thermal design must cover sustained high-output conditions.

🔊

Active Loudspeaker Power Module

The TAS5613PHD is suitable for an active loudspeaker module requiring a high-efficiency, high-output analog-input power stage. Its 150 W stereo rating or 300 W bridged-mono capability can serve conventional passive-driver networks when the power supply and thermal system are designed for that load. Integrated feedback supports a compact implementation, while the 80 kHz bandwidth accommodates high-resolution program material. The output-filter and switching-node layout must follow the manufacturer’s reference design, and copper heat spreading is essential because package dissipation increases with output power and channel loading.

🎚️

Professional Audio Monitor

The TAS5613PHD can serve as the power stage in a professional monitor or near-field loudspeaker when both output capability and low-level signal fidelity are important. The manufacturer specifies THD as low as 0.03% at 1 W into 4 ohms and flat THD behavior across frequency for natural sound reproduction. Its analog input allows direct integration with a preamplifier or DAC output stage, while integrated feedback reduces the complexity of discrete power-amplifier loops. The amplifier must still be evaluated for thermal rise, output-filter component tolerance, EMI behavior, and protection requirements under sustained monitoring conditions.

🖥️

Subwoofer and Full-Range Driver Amplifier

The TAS5613PHD is appropriate for a bridged subwoofer stage because the manufacturer identifies up to 300 W mono operation and supports 1-channel or 2-channel configurations. Its 18 V to 38 V operating range permits use with a conventional high-current audio supply, while the integrated-feedback topology supports predictable power-stage behavior. In a subwoofer implementation, the device drives the speaker through the prescribed external output-filter and inductor network rather than connecting the raw switching output directly to the load. Component selection for the filter, power-supply wiring, and heat sink should reflect the selected load impedance and worst-case audio demand.

📺

Multichannel AV Receiver Output Stage

The TAS5613PHD can be used in each output channel of a multichannel AV receiver when a common high-power Class-D architecture is preferred. Its selectable mono and stereo operation lets designers establish channel configurations according to the amplifier-board topology, while 150 W per stereo channel supports typical cinema and music loudspeaker loads. The 80 kHz signal bandwidth is suitable for high-definition source material, and click-and-pop-free startup improves user experience during mute and power transitions. Multi-channel deployment multiplies heat dissipation, so designers should evaluate each channel’s loading, fault condition, shared supply impedance, and enclosure cooling rather than sizing the system from one channel alone.

🏭

Automotive or Industrial Audio System

The TAS5613PHD can support industrial or automotive audio systems when its 18 V to 38 V supply range, analog interface, and 150 W stereo capability align with the available power architecture. The integrated-feedback power stage is useful in space-constrained equipment where a high-output Class-D solution is preferable to a large linear amplifier. Designers must verify the exact temperature limits, vibration environment, EMI constraints, and protection requirements against the manufacturer datasheet because the device is not automatically qualified for every automotive program. The exposed thermal pad and high-current output connections also require a robust land pattern, copper plan, and chassis or heat-sink strategy.

What is the Texas Instruments TAS5613PHD?
The Texas Instruments TAS5613PHD is a 150 W stereo, 300 W mono PurePath HD analog-input Class-D audio power stage in a 64-pin HTQFP package. It uses integrated feedback and operates from an 18 V to 38 V power supply. According to the TI product page, the device is intended for high-power stereo and bridged mono audio systems with click-and-pop-free startup and shutdown.
What are the key specifications of TAS5613PHD that engineers should know?
The TAS5613PHD combines 150 W stereo output, 300 W mono capability, an 18 V to 38 V supply range, and a 10.8 V to 13.2 V analog-input range. According to the TI product page, signal bandwidth reaches 80 kHz, THD can be 0.03% at 1 W into 4 ohms, PSRR reaches 80 dB in BTL operation without an input signal, and A-weighted SNR can exceed 100 dB.
What is the operating voltage of TAS5613PHD?
The TAS5613PHD power-supply operating range is 18 V to 38 V. Its analog audio input operates over a separate 10.8 V to 13.2 V range. According to the manufacturer product page, these two ranges describe different circuit domains, so the power rails and signal interface must be designed independently. Confirm the absolute maximum ratings and recommended operating conditions in the manufacturer datasheet before finalizing the supply design.
Where can I download the TAS5613PHD datasheet PDF?
The official TAS5613 product page provides the manufacturer datasheet and supporting technical information for TAS5613PHD. Open the link to the TAS5613 product page on this page and select its datasheet link for the complete pin descriptions, absolute maximum ratings, recommended operating conditions, typical performance curves, application information, and package drawings. The 64-pin HTQFP symbol and land pattern should be taken from those documents.
Where can I find the TAS5613PHD pinout?
The TAS5613PHD pinout is published in the manufacturer datasheet under the pin-configuration and pin-functions sections. The device is packaged in a 64-pin HTQFP measuring 14 mm by 14 mm. Use the datasheet’s terminal-number table and package drawing when assigning power rails, analog inputs, feedback connections, ground pins, and switching-node-related nets. Do not infer high-voltage switching connections from a generic HTQFP drawing.
Where can I buy TAS5613PHD online?
TAS5613PHD can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, volume pricing, delivery schedules, and minimum-order requirements. Its 64-pin HTQFP package, power rating, and analog-input interface should be confirmed against the project requirements before placing an order.
What is the price of TAS5613PHD?
Current TAS5613PHD pricing depends on order quantity, contract terms, and supply status. Submit the manufacturer part number and required quantity through the Request a Quote form on this page to receive a current quotation. The form provides a consistent commercial channel for evaluating high-volume production needs without relying on a stale list price.
What is the lead time for TAS5613PHD?
The current lead time for TAS5613PHD should be confirmed through the Request a Quote form on this page because it depends on order quantity and factory availability. For production planning, include the required delivery date, approved sourcing quantity, and target manufacturing schedule in the request. The manufacturer identifies TAS5613 as active, but active lifecycle status does not by itself guarantee a particular lot-level delivery date.
Is TAS5613PHD in stock?
TAS5613PHD inventory changes by region, quantity, and order date, so current stock should be checked through the Request a Quote form on this page. Include the required part number, target quantity, and shipment location in the request. The manufacturer lists TAS5613 as active, which supports ongoing product planning but should not be interpreted as a guarantee of immediate stock for every order quantity.
What is the best drop-in replacement for TAS5613PHD?
The TAS5615PHD is a close same-package option because Texas Instruments identifies TAS5613 as pin-compatible with TAS5615 and both use the 64-pin HTQFP power-stage format. The practical replacement decision must also confirm output power, supply range, feedback topology, exposed-pad layout, and thermal requirements against the manufacturer datasheets. Use the Request a Quote form to identify the exact orderable suffix.
What can replace TAS5613PHD?
TAS5615PHD, TAS5611PHD, and TAS5630D are the closest documented family choices because the TI product page states that TAS5613 is pin compatible with the TAS5630, TAS5615, and TAS5611 families. They are not automatically equivalent in output power, distortion, protection features, or thermal limits. Verify each candidate’s recommended application circuit and worst-case power dissipation before treating it as a drop-in substitution.
Is TAS5613PHD the same as TAS5615PHD?
The TAS5613PHD and TAS5615PHD belong to the same pin-compatible PurePath HD power-stage family, but they are not identical devices. Texas Instruments specifically lists TAS5615 as pin compatible with TAS5613. Their output rating, frequency response, distortion limits, thermal performance, and application requirements must still be compared because package compatibility alone does not establish electrical equivalence.
TAS5613PHD vs TAS5630D — which is better for a high-power stereo amplifier?
Choose TAS5613PHD when a 150 W stereo stage with a 300 W mono option matches the amplifier architecture, while TAS5630D should be evaluated when its higher power class is required. The TI product page identifies TAS5630 as pin compatible with TAS5613, making it a useful family comparison, but power dissipation and heat-sink requirements can increase substantially with output power. Confirm exact ratings and thermal limits before selection.
When should I choose TAS5613PHD over TAS5611PHD?
Choose TAS5613PHD when the design benefits from its 150 W stereo rating, up to 80 kHz signal bandwidth, and documented 0.03% THD capability at 1 W into 4 ohms. Choose TAS5611PHD only after confirming that its electrical limits, protection features, and thermal performance are adequate for the intended power and distortion targets. Both remain relevant because Texas Instruments identifies them as pin-compatible.
Is TAS5613PHD suitable for home-theater and active-speaker systems?
The TAS5613PHD is suitable for high-power home-theater and active-speaker stages when its 18 V to 38 V supply requirement and 150 W stereo rating match the loudspeaker load. Its 80 kHz signal bandwidth supports high-definition audio content, while integrated feedback and click-and-pop-free startup simplify system integration. A production design must still include correct filtering, thermal management, protection, and verified PCB layout.
Is there an official Texas Instruments equivalent for TAS5613PHD?
Texas Instruments identifies TAS5630, TAS5615, and TAS5611 as pin-compatible with TAS5613, making them the closest official family alternatives. No independent cross-brand device is established here as a guaranteed drop-in replacement. For an approved alternate source, verify the package drawing, pin functions, supply limits, feedback network, switching-node layout, thermal pad, and acoustic performance rather than relying only on the stated wattage.

Dados de referência de engenharia para TAS5613PHD — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose TAS5613PHD for a 150 W stereo or 300 W bridged-mono Class-D stage that uses an 18 V to 38 V supply and requires high-resolution audio bandwidth. TAS5615PHD and TAS5611PHD are strong same-family alternatives when their individual electrical limits better fit a design, but they should not be treated as identical without checking supply, distortion, feedback, and thermal data. TAS5630D is the logical higher-power comparison: its up to 300 W stereo capability can reduce channel count, although the doubled power rating also raises heat-sink, supply, output-filter, and PCB requirements. For any substitution, verify the 64-pin HTQFP land pattern, exposed-pad connection, pin functions, startup behavior, and worst-case dissipation. This page favors TAS5613PHD when its 150 W stereo rating provides sufficient headroom without introducing the thermal and cost burden of a higher-power class.

Comparação com alternativas

Parâmetro Este produto TAS5615PHD TAS5611PHD TAS5630D
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 64-pin HTQFP (14 mm x 14 mm) 64-pin HTQFP (14 mm x 14 mm) 64-pin HTQFP (14 mm x 14 mm) 64-pin HTQFP (14 mm x 14 mm)
Product Type Stereo Class-D analog-input audio power stage Pin-compatible PurePath HD power stage Pin-compatible PurePath HD power stage Pin-compatible PurePath HD power stage
Maximum Stereo Output Power 150 W 150 W 150 W 300 W
Maximum Mono Output Power 300 W 300 W 300 W 600 W

Principais diferenciais

  • Documented compatibility across three related TI power-stage families (vs TAS5630D)
  • 150 W stereo and 300 W bridged-mono capability (vs TAS5615PHD)
  • High-frequency audio bandwidth with low-level distortion (vs TAS5611PHD)
  • Integrated feedback and clean startup behavior (vs TAS5630D)

Notas de projeto

Use the exposed thermal pad as the primary heat-transfer path and connect it to the thermal and ground structure specified by the manufacturer datasheet. Estimated: power dissipation equals output power divided by amplifier efficiency minus the DC input power; at 150 W output and 90% efficiency with a 24 V supply, approximately 6.9 W enters the amplifier as electrical loss and must be removed through the package. The actual operating temperature depends on copper area, airflow, ambient temperature, and the manufacturer’s thermal model, so verify the design against the maximum channel load.

Place the input, feedback, power-supply, and output-filter components exactly as shown in the manufacturer application circuit. Keep the high-current switching loops compact, use multiple PCB layers to distribute power and ground, and avoid routing sensitive feedback traces beside switching-node nets. The 80 kHz signal bandwidth makes physical layout and component tolerances relevant to channel matching. Confirm the exposed-pad connection, via pattern, output inductors, and input network against the manufacturer land pattern rather than adapting a generic 64-pin HTQFP layout.

Design the 18 V to 38 V supply path for the current required by the selected stereo, mono, or bridged configuration. Estimated: at 150 W output, 90% efficiency, and 24 V supply, the average supply current is about 6.9 A; at 300 W bridged output it is about 13.9 A. These estimates show why local high-current decoupling, low-impedance supply wiring, and transient-response margin are important. Confirm average and peak current with the manufacturer’s application circuit because music transients and channel imbalance can increase demand.

Do not treat pin compatibility as proof of drop-in electrical equivalence. Before replacing TAS5613PHD with TAS5615PHD, TAS5611PHD, or TAS5630D, compare the power rating, supply range, input voltage, feedback network, gain, output-filter values, protection behavior, and exposed-pad connection. A higher-power alternative can dissipate more heat even when its package dimensions match. Also avoid applying a supply outside the 18 V to 38 V operating range or exceeding the absolute maximum ratings listed in the manufacturer datasheet.

Use the recommended external output-filter components and maintain the specified switching-node copper geometry to limit differential-mode and common-mode emissions. Feedback components should be positioned away from inductors and high-current switching areas, and analog input traces should use a quiet reference path. Validate the assembled amplifier with a representative speaker cable and enclosure because radiated emissions and audible artifacts can depend on the output-filter response, grounding, cable length, and chassis geometry rather than only on IC selection.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The TI product page identifies TAS5613 as active but does not state the requested environmental or automotive compliance classifications.

Buscas relacionadas

TAS5613PHD datasheet TAS5613PHD datasheet pdf TAS5613PHD pinout TAS5613PHD specifications Texas Instruments TAS5613PHD TAS5613PHD 150W amplifier TAS5613PHD 64 pin HTQFP TAS5613PHD application circuit TAS5613PHD equivalent TAS5613PHD replacement TAS5613PHD vs TAS5615PHD TAS5613PHD vs TAS5630D TAS5613PHD price TAS5613PHD stock TAS5613PHD lead time

Componentes & termos relacionados

Texas Instruments TAS5613PHD TAS5615PHD TAS5611PHD TAS5630D PurePath HD Class-D amplifier audio power stage analog-input power stage integrated-feedback amplifier stereo amplifier bridged-tie-load BTL THD PSRR SNR PurePath HD analog-input technology 64-pin HTQFP TQFP package family surface-mount package 150 W stereo output 300 W mono output 80 kHz signal bandwidth 18 V to 38 V power supply home-theater amplification
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ