TAS5725RGZT - 20W Class-D Audio Amplifier | Texas Instruments
N.º da peça: TAS5725RGZT ✓ AtivoTAS5725RGZT Visão geral
A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to control energy delivered to a loudspeaker. Compared with conventional linear audio output stages, the Class-D architecture can reduce power dissipation and heat generation, making it useful in consumer audio, automotive audio, communications equipment, and powered speaker systems. The exact channel configuration, modulation method, and electrical limits are defined by the manufacturer datasheet.
The TAS5725RGZT is associated with a 20 W audio output class and closed-loop feedback operation. Closed-loop feedback is intended to correct output distortion and voltage variation by measuring the amplifier output and adjusting the drive stage. Digital audio input support can also help reduce analog signal-chain complexity when the surrounding system uses a digital audio source, although connector format, data format, and control-interface details must be confirmed against the pin description and application information.
The RGZ ordering variant is supplied on tape and reel for automated surface-mount assembly. A tape-and-reel format supports high-volume pick-and-place production while protecting the exposed package leads from mechanical handling. Package dimensions, exposed-pad construction, pin orientation, and recommended land pattern require confirmation from the Texas Instruments package drawing before PCB release.
Typical uses include compact powered speakers, soundbars, automotive cabin-audio systems, communication speakers, and portable or networked audio products. In these systems, the amplifier converts a digital audio stream into a high-current drive signal for the loudspeaker. Designers should size the power supply for the amplifier load, maintain adequate copper area for thermal conduction, and filter switched-node energy before it reaches sensitive analog circuitry.
The main design consideration is ensuring that the power stage, speaker load, layout, and thermal design operate together. Speaker impedance and frequency determine required output power and current, while PCB copper and enclosure heat dissipation limit sustainable output. Place input, power, and ground connections according to the manufacturer reference layout, and validate EMC performance before a production release.
This page organizes the available TAS5725RGZT product information, sourcing questions, package guidance, and engineering considerations. For an exact electrical or pin-level decision, use the Texas Instruments datasheet, pin table, typical application circuit, and package drawing as the controlling references.
Alternativas drop-in para TAS5725RGZT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com TAS5725RGZT (mesmo formato e footprint) — diferindo em Product Type.
TAS5720ARGZT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TAS5720ARGZT-Q1
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TAS5722RGZT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TAS5725RGZR
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →TAS5715RGZT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TAS5725RGZT Classificações máximas e características elétricas
| Manufacturer | Texas Instruments |
| Product Type | Audio amplifier IC |
| Product Classification | Linear audio amplifier IC |
| Amplifier Class | Class-D audio amplifier |
| Rated Output Power | 20 W |
| Feedback Architecture | Closed-loop |
| Audio Input | Digital audio input |
| Encapsulamento | RGZ surface-mount package |
| Tipo de montagem | Surface mount |
| Packaging | Tape and reel |
Guia de Configuração de Pinos do TAS5725RGZT rgz surface-mount package
Configuração de pinos para TAS5725RGZT (pacote rgz surface-mount package). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para TAS5725RGZT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
TAS5725RGZT é adequado para 6 aplicaçãos: Compact Powered Speakers, Automotive Cabin Audio, Soundbar Speaker Drive, Communications Speaker Systems, Portable Audio Products, Smart Speaker Enclosures.
Compact Powered Speakers
The TAS5725RGZT fits compact powered-speaker designs requiring a 20 W-class Class-D output stage with digital audio input. Its closed-loop feedback can help the amplifier maintain a controlled output while the loudspeaker load changes. A typical implementation accepts a digital stream from a codec or processor, routes that signal into the amplifier, and uses the manufacturer reference layout for power, ground, and output connections. Before layout release, verify the exact digital format, supply limits, speaker impedance, and thermal performance. The main design tradeoff is integration against thermal headroom: a 20 W-class stage can require substantial copper area and careful enclosure airflow in a small enclosure.
Recomendado
Automotive Cabin Audio
The TAS5725RGZT is a candidate for automotive cabin-audio power stages because it combines a 20 W Class-D output class with a digital input and closed-loop feedback. Digital input can shorten the analog path between the source processor and speaker drive, while closed-loop operation can reduce output variation associated with supply or load conditions. Qualification is the decisive requirement: confirm AEC-Q100 status, operating-temperature limits, load dump behavior, and automotive-grade traceability for the exact MPN. The PCB should follow the manufacturer power and thermal layout, with attention to ground return, speaker wiring, EMI filtering, and heat spreading around the RGZ package.
Recomendado
Soundbar Speaker Drive
A soundbar can use the TAS5725RGZT as a 20 W-class digital-input Class-D drive section for compact internal speakers. Receiving a digital audio stream reduces the need to pass full-scale analog signals over long PCB traces, while closed-loop feedback helps control the output delivered to the loudspeaker. The amplifier remains part of a larger signal chain requiring a processor, codec, power converter, and mechanical enclosure. Validate channel mapping, digital sample-rate support, mute behavior, and gain structure against the manufacturer interface documentation. Thermal design should account for sustained music rather than a single 20 W test condition, and speaker filters must be coordinated with the amplifier output characteristics.
Recomendado
Communications Speaker Systems
The TAS5725RGZT can support communications equipment that converts a digital voice or audio stream into a 20 W-class speaker output. Closed-loop feedback is useful in products where speaker impedance and wiring length vary, and digital input helps maintain signal integrity between the communications processor and the power stage. The application still needs an appropriate voice codec or processor, system clocking, gain calibration, and output filtering. Validate the supported digital-audio format and ensure the power supply can support the amplifier's peak current, especially when the 20 W-class output is reached at low speaker impedance. Use short, appropriately terminated speaker traces and validate conducted and radiated emissions in the finished enclosure.
Recomendado
Portable Audio Products
The TAS5725RGZT can serve as the speaker-drive stage in a portable or networked audio product that accepts digital audio and needs a 20 W-class Class-D output. Class-D operation can help limit amplifier heat compared with a linear output stage, allowing the power converter and speaker system to be optimized together. Battery-powered products must account for peak current, conversion efficiency, and audible behavior during shutdown or source changes. The RGZ package supports compact surface-mount construction, but exposed-pad soldering and copper coverage must follow the manufacturer land pattern. Confirm the supported clocking arrangement, digital volume-control method, and thermal derating before integrating the amplifier with a low-voltage battery converter.
Recomendado
Smart Speaker Enclosures
The TAS5725RGZT is suitable for a smart speaker or connected audio enclosure that receives digital program material and drives a speaker through a 20 W-class amplifier stage. Placing the digital interface close to the audio processor can reduce analog noise exposure, while closed-loop feedback can improve consistency across loudspeaker loads. Smart-enclosure designs also involve microphones, echo cancellation, voice processing, wireless connectivity, and multiple power domains, so the amplifier should be isolated appropriately from sensitive inputs. Validate the digital clock and data routing, control initialization sequence, EMI performance, and amplifier shutdown behavior. At the board level, provide a low-impedance supply path and enough copper around the RGZ package to dissipate worst-case Class-D losses.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para TAS5725RGZT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Package | RGZ surface-mount tape-and-reel package |
| Brand | Texas Instruments |
| Product Type | Class-D audio amplifier IC |
| Rated Output Power | 20 W |
| Feedback Architecture | Closed-loop |
| Audio Input | Digital audio input |
Principais diferenciais
- Integrated digital-input Class-D audio function (vs Generic analog-input 20 W power stage)
- Closed-loop output control (vs Open-loop Class-D amplifier)
- Production-oriented tape-and-reel handling (vs Loose or cut-tape component)
Notas de projeto
Use the Texas Instruments RGZ land pattern and reference layout exactly, including the exposed-pad connection and thermal-via arrangement. Place the input, digital interface, ground return, and speaker-output paths according to the manufacturer recommendations. Keep high-current supply and speaker traces away from sensitive audio traces, and provide a continuous ground reference beneath the device where the package drawing permits it.
Evaluate Class-D conduction and switching losses at the highest sustained speaker power rather than using only the 20 W audio-output rating. Estimated thermal calculations should use the actual supply voltage, output RMS voltage, efficiency, ambient temperature, and RGZ thermal resistance from the manufacturer documentation. Increase exposed-pad copper area and improve enclosure heat transfer if the calculated junction temperature exceeds the device limit.
A 20 W Class-D output can create high-current edges and substantial switched-node energy. Use short power and output paths, minimize loop area, and provide local input and bulk capacitance at the supply pins. Keep the amplifier return current away from microphone, antenna, and clock inputs. Confirm EMI performance with the enclosure, speaker cable, filters, and power converter operating together, because laboratory compliance of the IC alone does not establish final-product compliance.
Do not infer pin compatibility from the RGZ suffix, package outline, or a distributor similarity label. Verify the complete pin table, digital-audio format, clock requirements, control interface, supply limits, and shutdown behavior for the exact TAS5725RGZT ordering variant. Also check that the selected speaker impedance and continuous-power conditions are permitted; a package match alone does not establish a valid replacement.
Informações de conformidade
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact Texas Instruments product documentation and declarations.